CD4017BPW - 10MHz CMOS Decade Counter | Texas Instruments
Teilenummer: CD4017BPW ✓ AktivCD4017BPW Übersicht
A decade counter is a digital logic component that advances through ten stable states. The CD4017 family belongs to the CMOS counter-and-divider category, which falls within logic ICs and digital semiconductors. Each clock pulse advances the internal state, while one of ten decade outputs becomes active at a time. This output arrangement converts a repetitive clock signal into a one-of-ten sequence without requiring a microcontroller.
The principal features include fully static operation, symmetrical decade outputs, and manufacturer testing of quiescent current at 20 V. The device is characterized at 5 V, 10 V, and 15 V supply levels and is designed around JEDEC-compatible CMOS operating requirements. Its medium-speed operation reaches 10 MHz typically when the supply is 10 V. The decoded outputs provide a straightforward way to drive indicators, relays, stepper-related circuits, or sequential control stages.
The CD4017BPW includes an asynchronous clear input for resetting the counter and a carry output for detecting the transition beyond the ninth counted state. The carry output can support cascaded counting or divide-by-ten behavior. Because it is a static CMOS counter, the output remains stable while the clock input is held, making the device suitable for low-duty-cycle control and instrumentation applications as well as continuous counters.
Typical uses include LED light chasers, decade sequencing, event counters, clock dividers, industrial timing modules, educational digital-logic projects, and control systems that require ten discrete steps. A microcontroller is unnecessary when only fixed decade sequencing or frequency division is needed. In systems requiring programmable sequencing, stored lookup tables, or complex state control, a microcontroller may provide greater flexibility.
PCB design should preserve the TSSOP-16 footprint and provide a clean return path to VSS. The clock and asynchronous-clear inputs require particular attention if they are driven by another digital device because excessive clock-edge or clear-pulse width can cause metastability or inconsistent counting. Bypass capacitors should be placed close to the supply pins, and unused outputs should be left unconnected unless their state must be observed or terminated. The manufacturer pin-description table should be used as the authority when assigning tracks and test points.
This page combines the electrical limits, pin assignment, drop-in alternatives, comparison data, and practical implementation guidance needed to evaluate the CD4017BPW as a compact, medium-speed decade-counter solution.
Drop-in-Alternativen für CD4017BPW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
CD74HC4017APWR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CD74HCT4017APWR
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HEF4017BT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HCF4017M
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HEF4017B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CD4017BPW Grenzwerte & elektrische Eigenschaften
| Product Type | CMOS decade counter and divider |
| Logic Family | CD4000 CMOS series |
| Maximum Typical Operating Frequency | 10 MHz typical at 10 V |
| Operating Mode | Fully static |
| Decoded Output Count | 10 outputs |
| Counter Elements | 1 decade counter element |
| Counter Bit Count | 10 bits |
| Counter Direction | Up |
| Clock Triggering | Positive edge triggered |
| Quiescent Current Test | 100% tested at 20 V |
| Parametric Rating Supplies | 5 V, 10 V, and 15 V |
| Output Characteristics | Standardized, symmetrical |
| Betriebstemperaturbereich | -55 °C to 125 °C |
| Gehäuse | 16-pin TSSOP (PW) |
| Montageart | Surface mount |
CD4017BPW Pin-Konfiguration
| Pin 1 | CLK — Positive-edge clock input |
| Pin 2 | CLK — Second positive-edge clock input |
| Pin 3 | CLR — Asynchronous clear input |
| Pin 4 | Q0 — Decade output 0 |
| Pin 5 | Q1 — Decade output 1 |
| Pin 6 | Q2 — Decade output 2 |
| Pin 7 | Q3 — Decade output 3 |
| Pin 8 | VSS — Ground reference |
| Pin 9 | Q9 — Decade output 9 |
| Pin 10 | Q8 — Decade output 8 |
| Pin 11 | Q7 — Decade output 7 |
| Pin 12 | Q6 — Decade output 6 |
| Pin 13 | Q5 — Decade output 5 |
| Pin 14 | Q4 — Decade output 4 |
| Pin 15 | CARRY — Carry output used for cascading or rollover indication |
| Pin 16 | VDD — Positive supply input |
Typische Anwendungen
CD4017BPW ist geeignet für 6 Anwendungs: LED Light Chaser, Frequency Divider, Industrial Step Sequencer, Digital Logic Education, Event and Repetition Counter, Timing and Delay Generator.
LED Light Chaser
The CD4017BPW suits an LED light chaser because its ten decoded outputs provide one active state per clock increment, eliminating a bank of counter-output decoding logic. The Texas Instruments datasheet identifies fully static operation and standardized, symmetrical output characteristics, making the device appropriate for repeating visual sequences. Drive the LEDs through suitable current-limiting and transistor stages rather than exceeding the counter output-current limits. At a 10 V supply, the device operates up to 10 MHz typical, so clock frequency can be selected to set the desired visual step rate. Decoupling near VDD and a short, quiet clock route help prevent false state transitions in longer LED strings.
Empfohlen
Frequency Divider
The CD4017BPW can divide a periodic input into ten lower-rate events by using its ten-state count function and carry indication. According to the Texas Instruments datasheet, the counter is fully static and reaches a 10 MHz typical operating frequency at 10 V, leaving substantial timing margin for lower-rate divider applications. The clock should have clean transitions, and the reset input must remain inactive during normal counting. Where multiple divide ratios are required, the carry output can support another counting stage or be decoded externally. Account for propagation delay when defining the exact division interval, particularly when cascading counters at the upper end of the operating-frequency range.
Empfohlen
Industrial Step Sequencer
The CD4017BPW provides a compact way to sequence ten machine-control stages from a periodic command signal. Its decoded outputs can enable relays, solenoids, indicators, or discrete control blocks, while the operating temperature range of -55 °C to 125 °C supports demanding industrial environments. The asynchronous clear function permits a controlled return to the initial state. External driver stages should provide isolation and current capacity because the counter outputs are intended for logic-level loads. Debounce any mechanical input used as the clock, and design reset so that power-up or fault conditions cannot accidentally advance the sequence.
Empfohlen
Digital Logic Education
The CD4017BPW is well suited to learning laboratories because it demonstrates decade counting, decoded outputs, asynchronous clearing, carry generation, and CMOS input behavior in one circuit. The ten outputs make state changes easy to observe with LEDs, while the 16-pin TSSOP package permits students to practice modern surface-mount assembly. The Texas Instruments datasheet identifies fully static operation and medium-speed operation up to 10 MHz typical at 10 V. Experiments can compare clock frequency, reset priority, and decoded-output behavior without a microcontroller, making the counter useful for both introductory and advanced digital-logic exercises.
Empfohlen
Event and Repetition Counter
The CD4017BPW can count repeated events and expose each of ten count positions through separate outputs. This arrangement is useful when a system must acknowledge batches of ten occurrences, trigger at the end of a decade, or prevent an upstream event from repeating until the counter is reset. The fully static architecture keeps the selected state stable without a continuous refresh clock. Inputs should be conditioned to meet the allowable pulse width, and the clear path should have a defined reset priority. If every event must be retained rather than represented by one of ten outputs, a parallel counter or shift register offers more detailed storage.
Empfohlen
Timing and Delay Generator
The CD4017BPW can generate ten selectable timing positions from an external clock, allowing a controller to initiate different delays or phases within a repeating cycle. The 10 MHz typical operating frequency at 10 V allows the source clock to define relatively fine timing increments before division. The carry output indicates rollover, which can synchronize another timing stage. Clock jitter and propagation delay accumulate into the effective timing interval, so the source oscillator and output path require validation. Use the asynchronous clear input to initialize the sequence predictably, and avoid changing the reset state while the system expects uninterrupted counting.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CD4017BPW – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CD74HC4017APWR | CD74HCT4017APWR | HEF4017BT | HCF4017M | HEF4017B |
|---|---|---|---|---|---|---|
| Package | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 (PW) | TSSOP-16 | TSSOP-16 | TSSOP-16 |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Nexperia | STMicroelectronics | Nexperia |
| Counter Function | Fully static decade counter and divider | 4017 decade counter and divider | 4017 decade counter and divider | 4017 decade counter and divider | 4017 decade counter and divider | 4017 decade counter and divider |
| Decoded Outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs | 10 outputs |
| Logic Family | CD4000 CMOS | 74HC CMOS | 74HCT CMOS | HEF4000 CMOS | HCF4000 CMOS | HEF4000 CMOS |
Wichtigste Unterscheidungsmerkmale
- Ten decoded outputs in one counter (vs. SN74LS90DR)
- Medium-speed CMOS operation (vs. CD74HC4017APWR)
- Fully static decoded outputs (vs. HEF4017BT)
- CD4000 logic compatibility (vs. CD74HCT4017APWR)
Designhinweise
Use the manufacturer TSSOP-16 footprint and place the VDD bypass capacitor immediately adjacent to pin 16, with a short return path to pin 8. Route the clock and clear nets away from switching nodes and high-current load paths. A solid ground plane reduces susceptibility to coupled noise, while keeping the clock trace short minimizes timing distortion and radiated emissions.
Treat clock, reset, and power interfaces as a coherent CMOS domain. The two clock inputs and asynchronous clear must not receive noisy or slow transitions, and the selected clock source must meet the datasheet pulse-width limits at the operating voltage. If a mechanical switch drives the counter, add suitable debouncing so one physical action cannot create multiple count edges.
Check output drive current before connecting LEDs, relays, or other loads directly to a decoded output. Use constant-current LED branches or transistor driver stages when the aggregate load exceeds the published output limits. Also account for supply current from the counter, driver circuitry, and attached loads so the regulator has enough margin for the complete load transient.
Do not assume that a 4017-family substitute is interchangeable solely because its footprint matches. Validate supply range, input thresholds, output levels, clock-edge timing, reset priority, and asynchronous clear behavior against the original circuit. In particular, HC and HCT logic thresholds can create compatibility problems when the original CD4017BPW operates at 3.3 V, 5 V, or a higher rail.
Compliance-Informationen
The manufacturer material identifies JEDEC-related requirements but does not state the requested compliance statuses. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.