CS4353-DNZ - 24-Bit Stereo Audio DAC | Cirrus Logic
Teilenummer: CS4353-DNZ ✓ AktivCS4353-DNZ Übersicht
A DAC is a signal-conversion integrated circuit that reconstructs a continuous analog voltage or current from sampled digital audio data. The CS4353 belongs to the digital-to-analog converter family, within the broader ADC/DAC and signal-conversion IC categories, and sits at the output stage of a digital audio playback chain. Its integrated line driver allows the device to feed consumer-audio line inputs without a separate stereo output amplifier.
The CS4353 integrates digital interpolation, a fifth-order multi-bit delta-sigma converter, digital de-emphasis, analog filtering, and a 2 VRMS line-level output driver. This integration eliminates several discrete filtering and output-driver stages normally placed after a DAC. The manufacturer datasheet identifies a 24-bit resolution, 192 kHz maximum sampling rate, I2S interface, 106 dB dynamic range, and 3.3 V analog and digital operation.
Its architecture converts the I2S input into a high-resolution analog output through a multi-bit delta-sigma conversion stage. The digital interpolation filter processes the incoming sample stream, while the analog section reconstructs the baseband audio waveform and removes unwanted high-frequency components. The integrated de-emphasis and line-output functions support conventional digital-audio playback architectures without separate digital-domain emphasis handling and external stereo line drivers.
Typical uses include CD and DVD player analog-output sections, multichannel audio receivers, home-theater preamplifiers, active speakers, automotive infotainment systems, and industrial or professional playback equipment. The 192 kHz capability also makes the converter suitable for high-resolution audio paths where source material exceeds a 48 kHz sampling rate. I2S compatibility simplifies connections to digital audio processors, transports, and application-specific audio engines.
Designers should follow the manufacturer datasheet for recommended decoupling, analog-output implementation, digital-interface routing, and exposed-pad connection. Keep the 3.3 V supply quiet, route analog and digital return currents carefully, and place bypass capacitors close to their associated pins. Differential output use and single-ended line-output selection depend on the exact board configuration described in the datasheet.
This page consolidates the manufacturer specifications, verified distributor listings, package details, and drop-in comparison information needed to evaluate the CS4353-DNZ. It also provides application guidance and design notes focused on signal integrity, power planning, and practical integration into a stereo audio output stage.
Drop-in-Alternativen für CS4353-DNZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CS4353-DNZ (gleiche Bauform und Footprint) – abweichend in Package.
CS4353-CNZ
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CS4353-DNZ Grenzwerte & elektrische Eigenschaften
| Funktion | Stereo digital-to-analog converter |
| Auflösung | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Digital Audio Interface | I2S |
| Versorgungsspannung | 3.3 V |
| Line Output Level | 2 VRMS |
| Signal-to-Noise Ratio | 106 dB |
| Channel Count | 2 channels |
| Converter Architecture | Fifth-order multi-bit delta-sigma |
| Digital Interpolation | Integrated |
| Digital De-emphasis | Integrated |
| Analog Filtering | Integrated |
| Output Driver | Integrated 2 VRMS line-level driver |
| Gehäuse | 24-QFN, 4 mm x 4 mm |
| Montageart | Surface mount |
| Betriebstemperatur | -40 °C to +85 °C |
CS4353-DNZ 24-qfn, 4 mm x 4 mm Pinbelegungsleitfaden
Pinbelegung für CS4353-DNZ (24-qfn, 4 mm x 4 mm-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für CS4353-DNZ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CS4353-DNZ ist geeignet für 6 Anwendungs: CD and DVD Player Analog Output, Home Theater Receiver and Preamplifier, High-Resolution Network Audio Player, Automotive Infotainment Audio, Active Speaker and Compact Stereo Amplifier, Digital Audio Test and Measurement.
CD and DVD Player Analog Output
The CS4353-DNZ fits a digital-audio transport followed by a conventional analog line-output section. Its I2S input accepts the decoded stereo stream, while the integrated fifth-order multi-bit delta-sigma converter and analog filters reconstruct the baseband waveform. Supporting sampling rates up to 192 kHz also allows the same converter architecture to cover high-resolution sources. The 2 VRMS integrated line driver removes the need for a separate stereo voltage-output amplifier in many designs, although passive filtering, grounding, and output-impedance requirements must still be evaluated. Use the manufacturer application circuit as the basis for supply decoupling, analog-output routing, and exposed-pad layout.
Empfohlen
Home Theater Receiver and Preamplifier
A home-theater preamplifier can use the CS4353-DNZ as the final stereo analog-output stage for two-channel playback or menu and zone audio. The I2S interface connects directly to a digital audio processor, and the 24-bit conversion plus 192 kHz sampling-rate support suits modern high-resolution source formats. The integrated 2 VRMS line driver provides a conventional line-level output for an external power amplifier. Because the converter is intended for audio-quality signal paths, isolate its analog return network from switching regulators and high-current amplifier rails. Keep clock and data traces away from the analog outputs, and follow the datasheet reference layout for decoupling and exposed-pad thermal relief.
Empfohlen
High-Resolution Network Audio Player
The CS4353-DNZ is suitable for a network or streaming player that terminates its digital audio stream in a dedicated I2S DAC stage. Its 24-bit interface and support for sampling rates up to 192 kHz align with high-resolution file playback, while the 3.3 V supply simplifies integration with modern digital audio engines. The integrated analog filtering and 2 VRMS line output eliminate several discrete stages and reduce board area. A practical implementation still needs a clean low-noise analog supply, local bypass capacitors, and careful separation between the I2S clock domain and the audio output region. Use the manufacturer reference circuit to select the external output-network components and confirm the required single-ended or differential configuration.
Empfohlen
Automotive Infotainment Audio
The CS4353-DNZ can support a stereo audio-output path in an automotive infotainment head unit when its commercial operating range and the vehicle’s environmental requirements are acceptable. I2S provides a direct connection to the source processor, and the 2 VRMS line-level driver feeds an external amplifier without adding a separate output-buffer stage. The 24-QFN 4 mm by 4 mm package also helps meet the space constraints of compact head units. For automotive deployment, review qualification, temperature, shock, and supply-noise requirements separately rather than assuming the commercial part is automatically AEC-Q100 qualified. The datasheet layout and external filtering guidance should be followed closely to preserve audio performance.
Empfohlen
Active Speaker and Compact Stereo Amplifier
The CS4353-DNZ can provide the line-level audio input for an active speaker when a digital audio engine generates an I2S stream upstream. Its 192 kHz maximum sampling rate accommodates high-resolution sources, and the integrated 2 VRMS driver reduces the analog component count before the power-amplifier stage. This arrangement is especially useful where the source processor and amplifier share a ground reference inside one enclosure. Maintain a low-impedance analog return path and place output filtering close to the converter pins. If the downstream amplifier requires differential input, use the supported output configuration shown in the manufacturer application information rather than adding an unspecified level-shifting network.
Empfohlen
Digital Audio Test and Measurement
Laboratory and industrial test equipment can use the CS4353-DNZ as a compact stereo I2S-to-analog reference output. Its 24-bit resolution and 192 kHz sampling-rate capability support signal-generation and audio-path validation tasks where higher-rate digital sources are used. The integrated analog filters and 2 VRMS output driver simplify construction of a repeatable line-level test fixture. Accurate measurements still depend on clean reference supplies, short analog traces, appropriate output loading, and calibrated downstream instruments. Use the manufacturer filtering and bypass recommendations to avoid creating a source of channel imbalance or excessive conversion noise. When driving long cables, add suitable line-driver or attenuation hardware after the converter output.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CS4353-DNZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CS4353-CNZ |
|---|---|---|
| Brand | Cirrus Logic | Cirrus Logic |
| Package | 24-QFN (4 mm x 4 mm) | 24-QFN (4 mm x 4 mm) |
| Converter Resolution | 24 bit | 24 bit |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Digital Audio Interface | I2S | I2S |
| Supply Voltage | 3.3 V | 3.3 V |
| Line Output Level | 2 VRMS | 2 VRMS |
| Output Driver | Integrated 2 VRMS stereo line-level driver | Integrated 2 VRMS stereo line-level driver |
Wichtigste Unterscheidungsmerkmale
- Integrated 2 VRMS stereo line driver (vs. CS4353-CNZ)
- High-resolution 192 kHz playback capability (vs. CS4353-CNZ)
- Single-chip stereo signal chain (vs. CS4353-CNZ)
Designhinweise
Place the required bypass capacitors immediately adjacent to their corresponding supply and ground pins, and route them through short, low-inductance connections. Keep analog output traces away from I2S clock, data, and switching-regulator nodes. The 24-QFN footprint has tight lead and exposed-pad geometry, so use the manufacturer land pattern and assembly recommendations without widening or shortening lands on the PCB.
Treat the I2S clock as a high-speed digital signal even though the DAC operates at audio frequencies. Route the clock, serial data, and frame signals as a grouped digital interface, provide a continuous return path, and avoid long stubs. Keep the clock away from the analog output pins and filtering components because clock-edge energy can couple into the reconstructed baseband audio and degrade the 106 dB signal-to-noise performance.
Use the 3.3 V supply specified by the manufacturer and decouple it locally rather than drawing audio load current from a general-purpose rail shared with digital switching circuitry. The converter includes analog and digital functions, so separating supply distribution paths where the reference design allows can reduce ripple-induced noise. Confirm capacitor type, voltage rating, and placement against the datasheet application circuit rather than substituting values solely by capacitance.
Do not assume that two stereo DACs with the same resolution and package are interchangeable. The suffix can encode ordering, temperature, qualification, or packing information, and the available listings do not provide a complete CS4353-DNZ versus CS4353-CNZ suffix matrix. Confirm the manufacturer ordering table, exposed-pad requirements, and output configuration before releasing a substitution into production.
Compliance-Informationen
The available manufacturer and distributor information identifies the commercial CS4353 family with a -40 °C to +85 °C temperature range but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.