CY8C3444AXI-106 - 8-Bit 50MHz 16KB Flash MCU | Infineon
Teilenummer: CY8C3444AXI-106 ✓ AktivCY8C3444AXI-106 Übersicht
A PSoC, or programmable system-on-chip, combines a CPU with configurable digital and analog resources on one integrated circuit. The CY8C34 family belongs to the broader embedded-controller hierarchy: flash-programmable system-on-chip, 8-bit microcontroller, embedded processing IC, and semiconductor. Unlike a fixed-function MCU, the device architecture is designed to let engineers configure peripheral functions and signal-routing behavior around application requirements rather than relying only on hard-wired peripheral sets.
The CY8C3444AXI-106 operates at up to 50 MHz and includes 16 KB of flash organized as 16K by 8 bits. Its 1.71 V minimum operating voltage supports systems that cannot use a conventional 3.3 V-only supply arrangement, while the 5.5 V maximum provides compatibility with common low-voltage embedded rails. The 100-pin TQFP package offers substantially more I/O and routing options than a small leaded or low-pin-count surface-mount package, which is valuable for control-heavy industrial, communications, and consumer-equipment designs.
The manufacturer identifies this device as part of the CY8C34 PSoC 3 family and the CY8C34xx device group. Its key architecture combines the 8051 instruction-set processor with configurable system-on-chip blocks. This combination supports embedded designs that need both conventional firmware control and configurable digital behavior, particularly when reducing the number of external discrete components is important. The exact clock, timer, analog, and I/O capabilities should be confirmed in the manufacturer datasheet for the selected device revision.
Typical uses include industrial control modules, sensor-interface equipment, communications controllers, compact consumer products, and general-purpose embedded platforms. The 100-pin package is especially useful when a design requires many external signals, mixed logic functions, or several peripheral connections around a central control core. The 16 KB flash capacity is sufficient for applications with focused firmware, but designers should evaluate firmware growth carefully when adding protocols, boot features, or user-interface functions.
Power and layout planning should begin with the manufacturer’s recommended operating range and pin-specific guidance. Decoupling, programming-interface access, clock implementation, exposed-pad treatment where applicable, and unused-pin configuration must follow the datasheet rather than generic MCU assumptions. The AXI-106 ordering code should be checked against temperature, qualification, and production requirements before the component is released into a new design.
This product summary consolidates the core device identity, package and parametric details with same-footprint family options and application-specific design guidance. It is intended to accelerate initial component selection while directing engineers to the manufacturer datasheet for the final pin, electrical, programming, and qualification checks required by the specific product revision.
Drop-in-Alternativen für CY8C3444AXI-106 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3444AXI-106 (gleiche Bauform und Footprint) – abweichend in CPU Architecture, Package.
CY8C3444AXI-096
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CY8C3444AXI-100
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444PVI-100
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CY8C3444AXA-106
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444AXI-106 Grenzwerte & elektrische Eigenschaften
| Device Type | 8-bit flash-programmable PSoC 3 microcontroller |
| CPU Architecture | 8051 8-bit CPU |
| Maximum CPU Frequency | 50 MHz |
| Program Flash Memory | 16 KB (16K x 8 bits) |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Gehäuse | 100-pin TQFP (14 x 14 mm) |
| Montageart | Surface mount |
| Product Family | CY8C34 PSoC 3 family |
| Device Group | CY8C34xx |
| Programmable System-on-Chip Architecture | 8051 CPU with configurable system-on-chip blocks |
CY8C3444AXI-106 100-pin tqfp (14 x 14 mm) Pinbelegungsleitfaden
Pinbelegung für CY8C3444AXI-106 (100-pin tqfp (14 x 14 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3444AXI-106.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CY8C3444AXI-106 ist geeignet für 6 Anwendungs: Industrial control modules, Sensor interface equipment, Communications controllers, Compact consumer control products, Programmable digital control, Embedded test and measurement products.
Industrial control modules
The CY8C3444AXI-106 fits compact industrial control modules that require an 8051-based 8-bit CPU at up to 50 MHz and 16 KB of flash. The 100-pin TQFP package provides a large pin count for control signals, communications, status indicators, and external interface connections. Its documented 1.71 V to 5.5 V operating range also supports embedded supply architectures found in industrial equipment. Before placing the device in a production controller, verify the AXI-106 temperature and qualification conditions, then implement the manufacturer’s clock, decoupling, programming, and unused-pin requirements.
Empfohlen
Sensor interface equipment
The CY8C3444AXI-106 is appropriate for sensor-interface equipment that needs programmable signal handling around a conventional embedded controller. Its PSoC 3 architecture combines an 8-bit 8051 CPU with configurable system-on-chip blocks, while 16 KB of flash accommodates focused acquisition and control firmware. The 100-pin TQFP package can support multiple I/O functions and board-level routing without the severe pin limitation of a small MCU package. Use the manufacturer datasheet to confirm the exact ADC, timer, and digital-block resources required by the sensor chain before final firmware and PCB design.
Empfohlen
Communications controllers
The CY8C3444AXI-106 can serve as the controller in a compact communications product that requires deterministic embedded processing and numerous external connections. The 50 MHz 8051 CPU handles protocol and supervisory tasks, while 16 KB of flash stores a focused firmware image. Its 1.71 V to 5.5 V range can simplify integration with low-voltage logic systems, and the 100-pin TQFP provides routing flexibility for serial links, indicators, and control signals. Validate protocol timing, transceiver levels, clocking, and signal-integrity requirements against the applicable device documentation and system-level specifications.
Empfohlen
Compact consumer control products
The CY8C3444AXI-106 is suitable for compact consumer products in which a low pin-count MCU would constrain the control interface. The device provides a 50 MHz 8-bit processor, 16 KB of flash, and a 100-pin TQFP footprint for buttons, indicators, local buses, and auxiliary functions. Operating down to 1.71 V supports integration with low-voltage power trees, although the complete design must observe the manufacturer’s minimum supply requirements for every operating mode. Confirm environmental, qualification, package, and production requirements before using the part in a high-volume consumer design.
Empfohlen
Programmable digital control
The CY8C3444AXI-106 is well suited to programmable digital-control applications because its PSoC 3 architecture places configurable blocks alongside an 8051 CPU. Engineers can use the 16 KB flash for supervisory firmware while assigning suitable digital functions to the programmable array, reducing reliance on separate fixed-function logic. The 50 MHz maximum clock supports responsive control-loop and sequencing tasks, while the 100-pin TQFP offers ample external routing options. The exact block count and resources must be checked in the manufacturer datasheet before logic assignment or compiled peripheral configuration is frozen.
Empfohlen
Embedded test and measurement products
The CY8C3444AXI-106 can be used in embedded test and measurement products where a compact controller must coordinate acquisition, calibration, status reporting, and external controls. Its 8051-based 8-bit architecture runs at up to 50 MHz, and the 100-pin TQFP offers enough package pins for multiple measurement-support signals and communications functions. The 1.71 V to 5.5 V operating range supports low-voltage instrumentation designs, while 16 KB of flash suits focused rather than highly expandable firmware. Confirm analog performance, timing accuracy, calibration limits, and thermal requirements in the manufacturer documentation.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CY8C3444AXI-106 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CY8C3444AXI-096 | CY8C3444AXI-100 | CY8C3444PVI-100 | CY8C3444AXA-106 |
|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) | 100-pin TQFP (14 x 14 mm) |
| CPU Architecture | 8051 8-bit CPU | 8051 8-bit CPU | 8051 8-bit CPU | 8051 8-bit CPU | 8051 8-bit CPU |
| Product Family | CY8C34 PSoC 3 | CY8C3444 family | CY8C3444 family | CY8C3444 family | CY8C34 PSoC 3 |
| Ordering Suffix | AXI-106 | AXI-096 | AXI-100 | PVI-100 | AXA-106 |
Wichtigste Unterscheidungsmerkmale
- Documented 50 MHz operating point (vs. CY8C3444AXI-096)
- Exact 16 KB flash configuration (vs. CY8C3444PVI-100)
- Broad documented operating-voltage range (vs. CY8C3444AXI-100)
- Same 100-pin TQFP footprint for PCB reuse (vs. CY8C3444AXA-106)
Designhinweise
Design the supply rail for the manufacturer-specified 1.71 V to 5.5 V operating range and apply the datasheet’s recommended decoupling directly at the appropriate power and ground pins. The 50 MHz clock figure is a maximum operating point, not a guarantee that every peripheral and interface can operate at that rate under every voltage condition. Validate startup, brownout, clock-transition, and I/O-driving behavior at the minimum rail used by the product rather than designing only around the nominal supply.
Route programming, clock, reset, and high-speed signal paths using the manufacturer’s reference schematic and pin definitions for the 100-pin TQFP package. Keep the programming interface accessible for production programming and bringout, maintain the specified clock topology, and place input and output decoupling capacitors close to their associated pins. Because several same-family ordering codes use the same mechanical package, do not assume their electrical pin requirements are interchangeable until each ordering table has been checked.
The CY8C3444 suffix system encodes ordering information that can affect speed grade, temperature range, qualification, and package treatment. Avoid replacing CY8C3444AXI-106 with another suffix solely because all four candidates use a 100-pin TQFP footprint. Compare the complete ordering table, clock characteristics, operating limits, and pin configuration. Firmware timing should also be revalidated if the replacement’s maximum CPU frequency differs from the target’s documented 50 MHz rating.
Preserve a clean return path for supply and ground connections and place sensitive signal inputs away from switching nodes and high-current outputs. Follow the manufacturer’s guidance for unused pins, exposed-pad treatment where applicable, and clock-source placement. For mixed analog, digital, and communications circuitry, partition the board according to signal type and provide local filtering at interface boundaries. Any EMI or signal-integrity requirement beyond the device recommendations should be checked with board-level measurements.
Compliance-Informationen
The manufacturer listing identifies the device and package but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm compliance for the exact CY8C3444AXI-106 ordering code before production release.