CY8C3444LTI-120 - 50MHz 8051 PSoC 3 MCU | Infineon
Teilenummer: CY8C3444LTI-120 ✓ AktivCY8C3444LTI-120 Übersicht
A PSoC 3 microcontroller is a mixed-signal embedded controller that combines an MCU core with programmable peripheral blocks and analog resources. The PSoC family extends the conventional microcontroller hierarchy by placing configurable digital logic, analog conversion, memory, and communication peripherals around a CPU core. This enables one device to consolidate functions that otherwise require a processor, separate programmable logic, analog ICs, and multiple discrete interface components.
The CY8C3444LTI-120 uses an 8-bit 8051 core with a maximum clock frequency of 50 MHz. Its 16 kByte flash provides program storage, while 2 kByte of SRAM supports working data. Twenty-five I/O pins provide connections for sensors, actuators, human-machine-interface circuits, and communications. An internal oscillator reduces dependence on an external clock source in designs that do not require precise external timing.
The integrated interface set includes I2C, SPI, USB, UART, USART, and EBI/EMI, allowing the controller to connect with sensors, memory, displays, communications transceivers, and external bus devices. This combination is particularly useful in compact embedded systems where board area and component count are important. Because the peripherals are programmable, engineers can configure pin routing and peripheral behavior more flexibly than with a fixed-function microcontroller.
Typical applications include industrial sensing and control equipment, USB-connected human-machine interfaces, compact consumer products, communications modules, and embedded control systems with mixed analog and digital inputs. The 48-QFN exposed-pad package supports compact surface-mount layouts, but its thermal and electrical performance depends on adequate exposed-pad soldering and PCB copper. Firmware, peripheral configuration, pin routing, and external interface implementation must be validated for each application.
For a new design, confirm voltage limits, clock requirements, startup behavior, and all peripheral electrical limits in the manufacturer datasheet before schematic release. Provide the exposed pad with a solderable thermal and electrical land pattern, follow the recommended decoupling arrangement, and avoid assigning functions until the complete package pin map and power requirements have been checked.
This product page consolidates the exact MPN specifications, sourcing information, interface coverage, package data, and practical design considerations needed to evaluate the CY8C3444LTI-120 alongside same-package PSoC 3 options.
Drop-in-Alternativen für CY8C3444LTI-120 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CY8C3444LTI-120 (gleiche Bauform und Footprint) – abweichend in Maximum CPU Frequency, Package, SRAM.
CY8C3444LTI-119T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3444LTI-120T
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
CY8C3444LTI-120 Grenzwerte & elektrische Eigenschaften
| Product Type | PSoC 3 programmable system-on-chip microcontroller |
| CPU Architecture | 8051, 8-bit |
| Maximum CPU Frequency | 50 MHz |
| Program Memory | 16 kByte flash (16K x 8) |
| SRAM | 2 kByte (2K x 8) |
| Number of I/O | 25 |
| Gehäuse | 48-QFN, 7 mm x 7 mm, exposed pad |
| Montageart | Surface mount |
| Betriebstemperatur | -40°C to +85°C |
| Internal Oscillator | Yes |
| I2C Interface | Supported |
| SPI Interface | Supported |
| USB Interface | Supported |
| UART and USART Interfaces | Supported |
| EBI/EMI Interface | Supported |
| RoHS-Status | ROHS3 compliant |
| Manufacturer | Infineon Technologies |
CY8C3444LTI-120 48-qfn, 7 mm x 7 mm, exposed pad Pinbelegungsleitfaden
Pinbelegung für CY8C3444LTI-120 (48-qfn, 7 mm x 7 mm, exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3444LTI-120.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CY8C3444LTI-120 ist geeignet für 6 Anwendungs: Industrial Sensor and Control Node, USB Human-Machine Interface, Compact Consumer Control Module, Communications and Protocol Bridge, LED Lighting Controller, IoT Sensor Gateway.
Industrial Sensor and Control Node
The CY8C3444LTI-120 fits compact sensing and control equipment that combines digital inputs with programmable analog or communications functions. Its 8051 core operates up to 50 MHz, while 16 kByte of flash stores application firmware and 2 kByte of SRAM supports working variables and data buffers. The 25 I/O positions and internal oscillator reduce external component requirements. I2C and SPI can connect sensors, while UART or USART provides a straightforward link to a higher-level controller. In a compact 48-QFN implementation, designers should preserve the exposed-pad land pattern and verify startup and signal-integrity requirements against the manufacturer electrical guidance.
Empfohlen
USB Human-Machine Interface
For USB-connected controls, the CY8C3444LTI-120 combines a 50 MHz 8051 core, 16 kByte of flash, and 2 kByte of SRAM in a compact 48-QFN package. The integrated USB interface can simplify host connectivity, while programmable digital blocks and 25 I/O positions can support buttons, indicators, encoders, displays, or panel communications. I2C and SPI provide additional paths to sensors, memory, or output devices. Firmware partitioning must account for the 16 kByte program-memory limit, and USB signal routing should follow the manufacturer interface and layout guidance. The exposed pad also serves the electrical and thermal design, making land-pattern fidelity essential.
Empfohlen
Compact Consumer Control Module
The CY8C3444LTI-120 is suitable for compact consumer modules requiring several communication standards without a separate high-performance processor. Its 8051 core runs up to 50 MHz, and the programmable peripheral architecture can support protocol-specific timing and pin routing. UART, USART, I2C, SPI, USB, and EBI/EMI provide flexible connectivity to sensors, memory, and accessories. With only 16 kByte of flash, applications should use the bootloader and firmware strategy described by the manufacturer. A 48-QFN body measuring 7 mm by 7 mm supports dense layouts, but designers still need correct exposed-pad soldering, decoupling, and pin assignment according to the package drawing.
Empfohlen
Communications and Protocol Bridge
The CY8C3444LTI-120 can act as a compact protocol-conversion or communications-control device by combining several serial interfaces with programmable logic. A 50 MHz 8051 core is suitable for deterministic embedded protocol handling, while 2 kByte of SRAM provides room for short buffers and state variables. UART and USART can connect to local serial equipment, I2C and SPI can handle sensors or transceivers, and USB provides a higher-speed host-facing path. The 16 kByte flash capacity may limit large protocol stacks, so firmware size should be checked early. Board implementation should isolate appropriate interfaces, provide clean return paths, and follow the manufacturer layout and grounding guidance.
Empfohlen
LED Lighting Controller
The CY8C3444LTI-120 can coordinate lighting effects, status indicators, or programmable LED sequences because its programmable digital resources and 25 I/O positions can be configured around the application. A 50 MHz 8051 core handles timing and control logic, while I2C and SPI allow connection to LED drivers, color controllers, or sensors. The internal oscillator can support designs that do not require an external precision reference. The 16 kByte flash limit favors compact, focused firmware, and the 2 kByte SRAM requires disciplined buffer sizing. In a 48-QFN layout, thermal-pad soldering and stable decoupling are critical because the same package must support reliable power delivery and controlled switching behavior.
Empfohlen
IoT Sensor Gateway
The CY8C3444LTI-120 supports small IoT sensor gateways that must gather local inputs and forward information over one or more serial links. Its 25 I/O pins can serve digital sensors and control outputs, while I2C and SPI support common sensor and memory devices. USB, UART, or USART can provide a local or host connection, and the 50 MHz 8051 core allows the programmable logic blocks to handle repetitive acquisition and formatting tasks. With 16 kByte of flash and 2 kByte of SRAM, firmware must remain compact and avoid oversized buffering. The 48-QFN exposed-pad package is space efficient but requires a qualified land pattern, adequate copper, and close placement of decoupling.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CY8C3444LTI-120 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CY8C3444LTI-119T | CY8C3444LTI-120T |
|---|---|---|---|
| Brand | Infineon | Infineon | Infineon |
| Package | 48-QFN, 7 mm x 7 mm, exposed pad | 48-QFN, 7 mm x 7 mm, exposed pad | 48-QFN, 7 mm x 7 mm, exposed pad |
| CPU Core | 8051, 8-bit | 8051, 8-bit | 8051, 8-bit |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Program Memory | 16 kByte flash (16K x 8) | 16 kByte flash | 16 kByte flash |
| SRAM | 2 kByte (2K x 8) | 2 kByte | 2 kByte |
Wichtigste Unterscheidungsmerkmale
- High-speed 8051 processing in a mixed-signal MCU (vs. CY8C3444LTI-119T)
- Compact 7 mm by 7 mm package (vs. CY8C3444LTI-119T)
- Broad integrated peripheral interface set (vs. CY8C3444LTI-120T)
Designhinweise
Create the PCB footprint from the manufacturer package drawing rather than treating the 48-QFN body and exposed pad as interchangeable. The exposed pad must have the specified solderable area, thermal-via arrangement, and copper treatment. Confirm pad dimensions and tolerances against the current package drawing before release because incorrect exposed-pad geometry can cause soldering defects and inadequate electrical or thermal performance.
Place the required input and internal bypass capacitors close to their associated power pins, using the exact capacitance, voltage rating, and tolerance specified in the manufacturer datasheet. Route power and ground through low-impedance planes where practical, avoid long current loops beneath the QFN, and verify startup behavior across the intended supply range. The exposed pad connection must follow the prescribed power-ground configuration.
Do not select a replacement solely from the processor frequency, flash size, or QFN body size. Confirm the 48-pin numbering, exposed-pad function, programming interface, clock requirements, peripheral mapping, and temperature grade. Firmware may also depend on the exact PSoC 3 derivative and suffix. These checks prevent a seemingly similar device from being placed on a PCB that lacks the required pins or application behavior.
Keep USB, SPI, and other edge-sensitive routes short, with continuous return paths and no unnecessary stubs. Follow the manufacturer guidance for external components, signal integrity, and pin multiplexing. For USB or other clocked interfaces, validate the complete board rather than only the MCU schematic, since package escape routing, ground-plane continuity, and adjacent switching signals can affect the final interface margin.
Plan firmware around the 16 kByte flash and 2 kByte SRAM limits from the beginning. Include only the peripheral blocks and boot features required by the product, and measure the final image rather than estimating code size. If the application requires larger firmware, deeper protocol stacks, graphics, or multiple simultaneous application functions, evaluate a higher-memory PSoC 3 derivative instead of forcing the design into this MCU.
Compliance-Informationen
The product is identified as ROHS3 compliant. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals classification is stated.