CY8C3446LTI-071 - 50MHz 64KB 8051 MCU | Infineon
Teilenummer: CY8C3446LTI-071 ✓ AktivCY8C3446LTI-071 Übersicht
A programmable system-on-chip combines a microcontroller core with configurable digital and analog resources on one integrated circuit. The PSoC architecture places an 8051-compatible CPU, flash, SRAM, programmable logic blocks, and programmable peripherals within a unified embedded platform. This integration allows designers to tailor functions around an application instead of relying on a fixed collection of discrete peripheral functions.
The CY8C3446LTI-071 provides 64 kByte of flash organized as 64K by 8 bits and 8 kByte of SRAM. Its 50 MHz maximum operating frequency supports deterministic control-loop execution and responsive serial-data handling. A 1.71 V to 5.5 V operating-voltage range supports integration across low-voltage digital systems, while the 48-QFN surface-mount package reduces board area compared with larger leaded packages.
The CY8C34xx family is positioned for embedded applications that benefit from configurable peripherals and programmable signal conditioning. The 8051 instruction architecture and compact 48-QFN footprint make the device suitable for control boards, interface modules, sensor nodes, and industrial equipment. The exposed-pad construction also provides a thermal and electrical path into the PCB when the package is soldered according to the manufacturer land pattern.
Typical uses include building a programmable communications controller, a digital sensor-hub interface, an industrial control module, a keypad and display controller, a power-sequencing controller, and a general-purpose embedded data-acquisition node. The 64 kByte flash capacity allows firmware and configuration data to be stored on-chip, while the 8 kByte SRAM supports working memory for protocol stacks and real-time control routines.
PCB implementation should follow the manufacturer package drawing for the 48-QFN footprint, including the exposed thermal pad, pad dimensions, and solder-mask settings. Place decoupling capacitors close to the appropriate power pins and provide a low-impedance ground connection. Firmware configuration, peripheral assignment, and clock-tree settings should be reviewed against the manufacturer programming documentation before production release.
This page combines the principal device specifications, commercial sourcing information, same-family drop-in candidates, and practical implementation guidance. It also distinguishes verified product characteristics from parameters that require confirmation in the manufacturer package drawing or device documentation, helping engineers qualify the CY8C3446LTI-071 for embedded-product designs.
Drop-in-Alternativen für CY8C3446LTI-071 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
CY8C3446LTI-073
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →CY8C3446LTI-073T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CY8C3446LTI-071 Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit programmable system-on-chip microcontroller |
| CPU Architecture | 8051, 8-bit |
| Maximale Taktfrequenz | 50 MHz |
| Program Flash Memory | 64 kByte (64K x 8 bits) |
| SRAM | 8 kByte |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Product Family | PSoC 3 CY8C34xx |
| Gehäuse | 48-QFN, 7 mm x 7 mm |
| Package Type | QFN with exposed pad |
| Montageart | Surface mount |
| Lebenszyklusstatus | Active |
CY8C3446LTI-071 qfn with exposed pad Pinbelegungsleitfaden
Pinbelegung für CY8C3446LTI-071 (qfn with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für CY8C3446LTI-071.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
CY8C3446LTI-071 ist geeignet für 6 Anwendungs: Industrial Control Module, Sensor Interface Controller, Communications Controller, Power Sequencing Controller, Data Acquisition Node, Human Interface Controller.
Industrial Control Module
The CY8C3446LTI-071 fits compact industrial controllers because its 8051 CPU operates up to 50 MHz while on-chip flash and SRAM support self-contained control firmware. The 48-QFN package preserves board area in dense control equipment, and the 1.71 V to 5.5 V range supports conventional low-voltage logic rails. Configure digital inputs, counters, communications, and output timing through the PSoC peripheral architecture. Thermal and industrial suitability must be qualified against the final enclosure, ambient temperature, and supply conditions.
Empfohlen
Sensor Interface Controller
The CY8C3446LTI-071 can consolidate acquisition, conditioning, and digital communication in a compact sensor node. Its programmable PSoC architecture supports flexible peripheral assignments, while the 50 MHz 8051 CPU provides responsive handling of sensor timing and protocol tasks. The 64 kByte flash stores application firmware and calibration parameters, and the 8 kByte SRAM supports sample buffers and communication state. Analog accuracy still depends on external circuitry, reference quality, grounding, and calibration performed in firmware.
Empfohlen
Communications Controller
The CY8C3446LTI-071 is suitable for embedded communications controllers that need deterministic execution and programmable peripheral resources without a large external component count. Its 8051 core supports operation up to 50 MHz, while 64 kByte of flash accommodates protocol firmware and configuration data. The 48-QFN footprint helps reduce board area in gateways, meters, and remote interface modules. Select and configure the required serial interface, verify signal-level compatibility, and confirm timing margins against the external transceiver or host.
Empfohlen
Power Sequencing Controller
The CY8C3446LTI-071 can serve as a dedicated power-sequencing and supervisory controller in compact electronic systems. Its 8051 CPU executes up to 50 MHz, providing enough control bandwidth to coordinate enable signals, monitor operating states, and record fault conditions. The 1.71 V to 5.5 V range allows use with low-voltage control rails, and the 48-QFN package limits board area. Timing margins, fault-response behavior, and watchdog implementation should be validated as part of the complete power-system design.
Empfohlen
Data Acquisition Node
The CY8C3446LTI-071 can serve as the control center for a compact data-acquisition node that gathers digital inputs and processes measurements locally. The 50 MHz 8051 CPU supports responsive sampling coordination, while 8 kByte of SRAM provides working space for buffers and protocol state. Its 64 kByte flash is suitable for acquisition firmware, configuration tables, and event parameters. For sensitive analog channels, add suitable external conversion and conditioning components, and validate acquisition timing and noise performance at the system level.
Empfohlen
Human Interface Controller
The CY8C3446LTI-071 can manage key scanning, display updates, status indication, and configuration input in a compact human-interface module. Programmable peripherals allow interface functions to be adapted within the PSoC architecture, and the 50 MHz CPU provides deterministic timing for scanning and debounce routines. The 64 kByte flash accommodates interface firmware and menu logic, while 8 kByte of SRAM supports display and input state. Validate electrical levels and timing for the selected display, keys, and external driver devices.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CY8C3446LTI-071 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CY8C3446LTI-073 | CY8C3446LTI-073T |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 48-QFN (7x7) | 48-QFN (7x7) | 48-QFN (7x7) |
| CPU Architecture | 8-bit 8051 | 8-bit 8051 | 8-bit 8051 |
| Maximum Clock Frequency | 50 MHz | 50 MHz | 50 MHz |
| Flash Memory | 64 kByte | 64 kByte | 64 kByte |
| SRAM | 8 kByte | 8 kByte | 8 kByte |
| Operating Voltage Range | 1.71 V to 5.5 V | 1.71 V to 5.5 V | 1.71 V to 5.5 V |
| Programmable Architecture | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx |
| Ordering Suffix | -071 | -073 | -073T |
Wichtigste Unterscheidungsmerkmale
- Matches the core resource profile of the closest same-family alternatives (vs. CY8C3446LTI-073)
- Provides a direct ordering-path alternative for established 48-QFN designs (vs. CY8C3446LTI-073T)
- Combines programmable peripherals with substantial embedded memory (vs. CY8C3446LTI-073)
Designhinweise
Use the manufacturer 48-QFN land pattern rather than inferring geometry from the 7 mm by 7 mm body size. Confirm pad length, width, pitch, solder-mask expansion, and the exposed-pad connection before releasing artwork. Place power bypass capacitors immediately adjacent to the relevant supply pins, and provide short, low-impedance connections between the pads and ground plane to minimize switching-loop area.
The exposed pad is an important thermal and electrical feature of the 48-QFN package. Connect it according to the manufacturer pin and layout guidance, provide uninterrupted copper beneath the device where recommended, and avoid placing thermal breaks beneath the pad. Actual junction temperature depends on package dissipation, PCB copper area, airflow, ambient temperature, and switching activity, so these conditions must be included in the thermal assessment.
Do not treat every CY8C3446 ordering suffix as electrically and commercially interchangeable. Before substituting CY8C3446LTI-073 or CY8C3446LTI-073T, compare the ordering table, temperature grade, qualification status, exposed-pad treatment, and active device status. Preserve the firmware configuration and revalidate startup, clocking, peripherals, and timing after any substitution.
Design the supply network for the 1.71 V to 5.5 V operating range while accounting for startup, transient response, and peripheral current demands. Place bulk and high-frequency decoupling at the power entry and device pins, maintain a low-impedance ground reference, and verify brownout and power-sequencing behavior with the complete peripheral load. The exact rail combinations and pin-specific limits must be taken from the device electrical documentation.
Compliance-Informationen
Compliance declarations were not identified for the exact ordering code. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status from the manufacturer declaration applicable to the ordered MPN.