DSPIC30F4013T-20I/ML - 20 MIPS 16-bit DSC | 48KB Flash | Microchip
Teilenummer: DSPIC30F4013T-20I/ML ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $9.95 | $9,95 |
| 10 | $9.2 | $92,00 |
| 100 | $8.1 | $810,00 |
| 500 | $7.3 | $3.650,00 |
| 1.000 | $6.45 | $6.450,00 |
DSPIC30F4013T-20I/ML Übersicht
A digital signal controller (DSC) is a hybrid device that combines a microcontroller's deterministic control peripherals with a digital signal processor's (DSP) computational throughput for closed-loop motor control, power conversion, and sensor processing. Within the broader taxonomy, the dsPIC30F sits at the intersection of microcontrollers and DSPs, enabling single-chip implementations that previously required a dedicated MCU plus a DSP. The 20 MIPS core delivers single-cycle 16x16 MAC operations, sufficient for field-oriented control (FOC) of three-phase motors and digital power conversion at switching frequencies up to ~50 kHz.
Key features include 13 channels of 12-bit Analog-to-Digital conversion (up to 200 ksps), one 16-bit timer/capture input and one 16-bit timer/PWM output pair, plus a dedicated Motor Control PWM module with up to six PWM outputs and complementary mode. Communication peripherals include one UART/USART, one I2C, one SPI, and one CAN module (CAN 2.0B active). The 44-QFN (ML) package offers an exposed thermal pad with low thermal resistance suitable for power conversion applications.
The device operates from 3.0 V to 5.5 V supply and is supported by the MPLAB X IDE and MPLAB XC16 compiler. It targets motor control, sensorless BLDC, AC induction drives, and digital PFC/PSU applications. According to Microchip datasheet DS70138G, the 16-bit DSP engine enables accurate math for control loops while the integrated peripherals reduce BOM cost.
When designing with this device, ensure the supply decoupling follows the 100 nF + bulk capacitor arrangement specified in the datasheet and that the exposed pad is soldered for proper thermal dissipation. The CAN bus signals require external transceivers; the dsPIC30F4013 implements only the protocol controller.
Drop-in-Alternativen für DSPIC30F4013T-20I/ML – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC30F4013T-20I/ML (gleiche Bauform und Footprint) – abweichend in ADC, Package, Operating Temperature, Core Architecture, PWM Channels.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC30F4013-20I/ML
✅ Drop-In✓ Auf Lager
$5.85 / Stück
Datenblatt ansehen →DSPIC30F4013T-20E/ML
✅ Drop-In✓ Auf Lager
$5.1 / Stück
Datenblatt ansehen →DSPIC30F4011T-20I/ML
✅ Drop-In✓ Auf Lager
$5.95 / Stück
Datenblatt ansehen →DSPIC30F4012T-30I/ML
✅ Drop-In✓ Auf Lager
$6.15 / Stück
Datenblatt ansehen →DSPIC30F4013T-20I/ML Grenzwerte & elektrische Eigenschaften
| Core Architecture | dsPIC30F 16-bit DSC |
| Core Performance | 20 MIPS |
| Program Memory | 48 KB (16K x 24) Flash |
| RAM | 2 KB |
| Data EEPROM | 1024 bytes |
| Versorgungsspannung | 3.0 V to 5.5 V |
| Betriebstemperatur | -40C to +85C (Industrial) |
| ADC | 13 channels, 12-bit, 200 ksps |
| I/O Pins | 20 |
| Timers | 16-bit timer/capture + 16-bit timer/PWM |
| PWM Channels | 6 PWM (Motor Control PWM module) |
| Communication | 1x CAN 2.0B, 1x UART, 1x SPI, 1x I2C |
| Gehäuse | 44-pin QFN (8x8 mm) with exposed pad (ML) |
| Montageart | Surface Mount, Tape & Reel |
| DSP Engine | Yes (dual 40-bit accumulators) |
DSPIC30F4013T-20I/ML Pin-Konfiguration
| Pin 1 | EMUD — ICD Primary Communication Channel (EMUD/EMUC pair used for programming/debug) |
| Pin 2 | EMUC — ICD Primary Communication Channel clock line |
| Pin 3 | RA0/AN0 — I/O / Analog input 0 |
| Pin 4 | RA1/AN1 — I/O / Analog input 1 |
| Pin 5 | RA2/AN2 — I/O / Analog input 2 |
| Pin 6 | RA3/AN3 — I/O / Analog input 3 |
| Pin 7 | RA4/AN4 — I/O / Analog input 4 |
| Pin 8 | AVDD — Analog supply voltage |
| Pin 9 | AVSS — Analog ground |
| Pin 10 | RA5/AN5 — I/O / Analog input 5 |
| Pin 11 | RA6/AN6 — I/O / Analog input 6 |
| Pin 12 | RA7/AN7 — I/O / Analog input 7 |
| Pin 13 | RB0/AN8 — I/O / Analog input 8 |
| Pin 14 | RB1/AN9 — I/O / Analog input 9 |
| Pin 15 | RB2/AN10/C1IN+ — I/O / Analog input 10 / Comparator 1 non-inverting input |
| Pin 16 | RB3/AN11/C1IN- — I/O / Analog input 11 / Comparator 1 inverting input |
| Pin 17 | RB4/AN12 — I/O / Analog input 12 |
| Pin 18 | RB5/AN13/C2IN+ — I/O / Analog input 13 / Comparator 2 non-inverting input |
| Pin 19 | VSS — Digital ground |
| Pin 20 | VDD — Digital supply voltage |
| Pin 21 | RB6/OC1/PWM1H — I/O / Output Compare 1 / PWM1 High |
| Pin 22 | RB7/OC2/PWM1L — I/O / Output Compare 2 / PWM1 Low |
| Pin 23 | RC13/C1OUT — I/O / Comparator 1 output |
| Pin 24 | RC14/C2OUT — I/O / Comparator 2 output |
| Pin 25 | RC15 — I/O port only |
| Pin 26 | OSC1/RC12 — Crystal oscillator input / I/O |
| Pin 27 | OSC2/RC13 — Crystal oscillator output / I/O |
| Pin 28 | MCLR — Master Clear (reset) input |
| Pin 29 | RC1/T2CK — I/O / Timer2 clock input |
| Pin 30 | RC2/T1CK — I/O / Timer1 clock input |
| Pin 31 | RC3 — I/O port only |
| Pin 32 | RC4 — I/O port only |
| Pin 33 | INT0/RF6 — External Interrupt 0 / I/O |
| Pin 34 | FLTA/RF7 — PWM Fault A input / I/O |
| Pin 35 | PWM2L/RD0 — PWM2 Low output / I/O |
| Pin 36 | PWM2H/RD1 — PWM2 High output / I/O |
| Pin 37 | PWM3L/RD2 — PWM3 Low output / I/O |
| Pin 38 | PWM3H/RD3 — PWM3 High output / I/O |
| Pin 39 | PWM4L/RD4 — PWM4 Low output / I/O |
| Pin 40 | PWM4H/RD5 — PWM4 High output / I/O |
| Pin 41 | CANRX/RF0 — CAN bus receive / I/O |
| Pin 42 | CANTX/RF1 — CAN bus transmit / I/O |
| Pin 43 | U1RX/RF2 — UART1 receive / I/O |
| Pin 44 | U1TX/RF3 — UART1 transmit / I/O |
Typische Anwendungen
DSPIC30F4013T-20I/ML ist geeignet für 7 Anwendungs: Sensorless BLDC Motor Control, Digital Power Factor Correction (PFC), AC Induction Motor VFD, Automotive ECU Communication Gateway, Solar Microinverter MPPT Control, Industrial Sensor Signal Processing, Uninterruptible Power Supply (UPS) Control.
Sensorless BLDC Motor Control
The DSPIC30F4013T-20I/ML drives sensorless brushless DC motor control with field-oriented control (FOC) using its 20 MIPS dsPIC30F core and DSP-enhanced MAC engine. The 6-channel Motor Control PWM module with programmable dead-time generates complementary switching signals for three-phase inverters at up to ~20 kHz, while 13 ADC channels sample phase currents and back-EMF simultaneously at 200 ksps. Built-in CAN bus enables networked motor nodes in industrial automation and EV auxiliary systems.
Empfohlen
Digital Power Factor Correction (PFC)
The DSPIC30F4013T-20I/ML implements digital PFC control loops in switch-mode power supplies. Its DSP engine computes average-current-mode control at 40 MHz, while the 12-bit ADC samples inductor current and input voltage at 200 ksps. The 48 KB Flash holds state-machine and PI controller code; 2 KB RAM stores ADC history buffers. The QFN exposed pad dissipates heat from switching losses, suiting 500 W server PSU and telecom rectifier designs.
Empfohlen
AC Induction Motor VFD
The DSPIC30F4013T-20I/ML is ideal for variable-frequency drives (VFD) controlling three-phase AC induction motors in HVAC, pumps, and industrial machinery. Its 20 MIPS core runs V/Hz and sensorless vector control algorithms in real time, while the Motor Control PWM module outputs 6 channels with dead-time insertion for safe inverter switching. CAN bus provides Modbus or CANopen connectivity for SCADA integration, and the 44-QFN footprint fits compact IPM-style drive modules.
Empfohlen
Automotive ECU Communication Gateway
In automotive body and powertrain ECUs, the DSPIC30F4013T-20I/ML serves as a CAN-to-LIN gateway and low-level actuator controller. Its CAN 2.0B active module handles OBD-II diagnostics at 1 Mbit/s, while the UART/SPI/I2C peripherals interface with sensors and actuators. The 16-bit DSC ensures deterministic response for safety-critical motor commands. Note: select DSPIC30F4013T-30I/ML or Q-grade parts for AEC-Q100 automotive qualification.
Empfohlen
Solar Microinverter MPPT Control
Photovoltaic microinverters use the DSPIC30F4013T-20I/ML to implement perturb-and-observe maximum power point tracking (MPPT) with sub-millisecond update rates. The DSP engine computes power, duty cycle, and grid-synchronization math while the 12-bit ADC samples panel voltage and current. The CAN bus reports telemetry to a centralized inverter management unit. Industrial -40C to +85C rating suits outdoor microinverter enclosures.
Empfohlen
Industrial Sensor Signal Processing
The DSPIC30F4013T-20I/ML performs real-time DSP on industrial sensor signals such as vibration analysis, weight scale filtering, and ultrasonic ranging. Its 16-bit MAC instructions execute FIR/IIR filters and FFT-based spectral analysis on 2 KB RAM sample buffers. The 13-channel ADC captures multi-axis sensor data at 200 ksps, while SPI and I2C interface to external accelerometers and load cells. CAN bus reports processed data to PLC controllers.
Empfohlen
Uninterruptible Power Supply (UPS) Control
In online UPS systems, the DSPIC30F4013T-20I/ML controls the inverter stage, battery charging, and grid synchronization. The Motor Control PWM outputs 50/60 Hz sine-wave modulated switching at high resolution. The DSP engine computes RMS voltage, current, and THD measurements for regulation loops. CAN bus enables monitoring via SCADA; the exposed-pad QFN-44 dissipates heat in sealed UPS enclosures. Industrial temperature rating supports 24/7 operation.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC30F4013T-20I/ML – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC30F4013-20I/ML | DSPIC30F4013T-20E/ML | DSPIC30F4011T-20I/ML | DSPIC30F4012T-30I/ML |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-QFN (8x8 mm) ML | 44-QFN (8x8 mm) ML - same | 44-QFN (8x8 mm) ML - same | 44-QFN (8x8 mm) ML - same | 44-QFN (8x8 mm) ML - same |
| Core MIPS | 20 MIPS | 20 MIPS | 20 MIPS | 20 MIPS | 30 MIPS |
| Flash Program Memory | 48 KB | 48 KB | 48 KB | 24 KB (-50%) | 24 KB (-50%) |
| RAM | 2 KB | 2 KB | 2 KB | 1 KB (-50%) | 2 KB |
| CAN Bus | Yes (CAN 2.0B) | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +125C | -40C to +85C | -40C to +85C |
| ADC Channels | 13 x 12-bit | 13 x 12-bit | 13 x 12-bit | 9 x 12-bit | 13 x 12-bit |
Wichtigste Unterscheidungsmerkmale
- Built-in dedicated Motor Control PWM with 6 channels and dead-time insertion (vs. DSPIC30F4011T-20I/ML)
- CAN 2.0B bus interface integrated (vs. DSPIC30F4012T-30I/ML)
- Larger 48 KB Flash for complex control algorithms (vs. DSPIC30F4012T-30I/ML)
Designhinweise
The 44-QFN exposed pad is the primary heat dissipation path for the DSPIC30F4013T-20I/ML. Per Microchip packaging spec, the thermal pad must be soldered to a copper pour of at least 1 square inch with thermal vias connecting to internal ground planes. In switching-converter designs where the DSC drives MOSFETs directly at 6 PWM outputs, expect 0.5-1 W dissipation; without thermal vias the junction can rise above 100C under full load.
Estimated: at 5 V VDD, 40 MHz operation, all peripherals active, and CAN bus transmitting continuously, the DSPIC30F4013T-20I/ML draws approximately 80-120 mA from AVDD+VDD combined. Place a 10 uF bulk + 100 nF ceramic decoupling capacitor pair within 5 mm of each VDD/AVDD pin. AVDD and VDD may be tied to the same 5 V rail if the analog reference is decoupled by a ferrite bead and 100 nF cap to AVSS.
Common pitfalls with the DSPIC30F4013T-20I/ML: (1) Confusing pin 1 location - the QFN pin 1 marker is a small dot, not a notch; orient the PCB footprint accordingly. (2) The dsPIC30F uses a 24-bit Flash word format, not 16-bit, so program memory sizes (16K x 24 = 48 KB) appear different from typical 8-bit MCUs. (3) The CAN module is protocol-only - an external MCP2551 or TJA1050 transceiver is required. (4) The MCLR pin is mandatory for proper reset; leaving it floating causes erratic behavior.
PCB layout: place the DSPIC30F4013T-20I/ML within 25 mm of the crystal (typically 10 MHz fundamental mode with 22 pF load caps). Keep ADC analog traces (AN0-AN13) short and away from PWM switching signals to minimize coupled noise. Route the CANRX/CANTX differential pair as a matched 100 ohm impedance. Provide a guarded analog ground island tied to AVSS, joined to digital ground at a single point near the IC AVSS pin.
Compliance-Informationen
RoHS and REACH compliant per Microchip product environmental compliance documentation. Standard DSPIC30F4013T-20I/ML is not AEC-Q100 qualified; for AEC-Q100 automotive applications use DSPIC30F4013-30I/ML with appropriate automotive part number. Lead-free and halogen-free per Microchip Material Composition Declaration.
