DSPIC30F6013A-20E/PT - 16-bit 20 MIPS DSC, 132KB Flash, TQFP-80 | Microchip
Teilenummer: DSPIC30F6013A-20E/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $14.71 | $14,71 |
| 10 | $13.39 | $133,90 |
| 100 | $12.04 | $1.204,00 |
| 500 | $10.85 | $5.425,00 |
| 1.000 | $9.65 | $9.650,00 |
DSPIC30F6013A-20E/PT Übersicht
A Digital Signal Controller (DSC) is a hybrid architecture that fuses a deterministic 16-bit microcontroller core with single-cycle MAC DSP engine, single-cycle hardware multiply, and 40-bit accumulators. DSCs sit in the product-type hierarchy between 8/16-bit microcontrollers (control-oriented) and 32-bit microprocessors (heavy compute); the dsPIC30F family specifically targets 5V systems where noise immunity, automotive sensor interfaces, and motor-drive PWM generation are required, complementing Microchip's higher-performance 3.3V dsPIC33F and PIC32MX lines.
Key features include 132 KB Flash program memory, 6 KB SRAM, a 12-bit ADC with up to 16 input channels and 200 ksps throughput, multiple 16-bit timers, motor-control PWM modules with up to 8 output pairs, and a CAN 2.0B peripheral. The instruction set is 16-bit wide with an 83-base instruction set and 24-bit-wide program word, while 60 digital I/O pins give ample external interface flexibility. The extended (-40C to +125C) operating temperature rating and 4.5V-5.5V supply voltage support industrial environments. Peripherals also include UART, SPI, I2C, an enhanced CAN module, motor-control PWM with up to 8 channels and dedicated DSP outputs.
The dsPIC30F6013A employs a Harvard architecture with separate program and data paths, a 40-bit barrel shifter, and DSP-specific accumulators that eliminate saturation under signal-processing workloads. The wide 5V-tolerant I/O structure simplifies interfacing to legacy analog stages and high-voltage gate drivers, and the rich motor-control PWM plus CAN peripherals make this device suitable for vector-controlled drives.
Typical applications include three-phase AC induction and BLDC motor drives, sensor-less field-oriented control (FOC), UPS systems, solar inverters, audio signal processing, and industrial automation. The DSP engine handles Clarke/Park transforms and PID loops while the MCU core manages communication stacks.
When designing with this part, place decoupling capacitors within 5 mm of every supply pin and keep the oscillator traces short. The 5V-wide VDD tolerance enables direct connection to industrial 24V-bus-derived rails (post-regulation) but demands attention to EMI from switching power stages adjacent to the DSC.
Drop-in-Alternativen für DSPIC30F6013A-20E/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC30F6013A-20E/PT (gleiche Bauform und Footprint) – abweichend in Package, ADC, Timers, Operating Temperature, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC30F6013A-20E/PF
✅ Drop-In✓ Auf Lager
$7.95 / Stück
Datenblatt ansehen →DSPIC30F6012A-20I/PT
✅ Drop-In✓ Auf Lager
$10.1 / Stück
Datenblatt ansehen →DSPIC30F6011AT-30I/PT
✅ Drop-In✓ Auf Lager
$7.5 / Stück
Datenblatt ansehen →DSPIC30F6010AT-20E/PT
✅ Drop-In✓ Auf Lager
$8.1 / Stück
Datenblatt ansehen →DSPIC30F6013-20I/PF
✅ Drop-In✓ Auf Lager
$9.4 / Stück
Datenblatt ansehen →DSPIC30F6013A-20E/PT Grenzwerte & elektrische Eigenschaften
| Core Architecture | dsPIC30F, 16-bit modified Harvard |
| Maximum CPU Speed | 20 MIPS (40 MHz oscillator) |
| Program Memory | 132 KB (44K x 24) Flash |
| RAM | 6144 bytes |
| Data EEPROM | 2048 bytes |
| Supply Voltage (VDD) | 4.5 V to 5.5 V |
| I/O Pins | 60 |
| ADC | 12-bit, 16 channels, 200 ksps |
| Motor Control PWM | 8 output pairs, dedicated DSP mode |
| CAN | 1 x CAN 2.0B |
| UART / SPI / I2C | 2 UART, 2 SPI, 1 I2C |
| Timers | 5 x 16-bit / 2 x 32-bit |
| Betriebstemperatur | -40 C to +125 C (extended, "E" suffix) |
| Gehäuse | 80-pin TQFP (12 x 12 mm) |
| Montageart | Surface Mount |
| Lead-Free / RoHS | Lead-free (per DigiChip datasheet row) |
DSPIC30F6013A-20E/PT Pin-Konfiguration
| Pin 1 | MCLR — Master Clear (reset) input |
| Pin 2 | PWM1L — PWM1 low-side output |
| Pin 3 | PWM1H — PWM1 high-side output |
| Pin 4 | PWM2L — PWM2 low-side output |
| Pin 5 | PWM2H — PWM2 high-side output |
| Pin 6 | PWM3L — PWM3 low-side output |
| Pin 7 | PWM3H — PWM3 high-side output |
| Pin 8 | VSS — Ground |
| Pin 9 | VDD — Digital supply (4.5-5.5 V) |
| Pin 10 | PWM4L — PWM4 low-side output |
| Pin 11 | PWM4H — PWM4 high-side output |
| Pin 12 | PWM5L — PWM5 low-side output |
| Pin 13 | PWM5H — PWM5 high-side output |
| Pin 14 | PWM6L — PWM6 low-side output |
| Pin 15 | PWM6H — PWM6 high-side output |
| Pin 16 | PWM7L — PWM7 low-side output |
| Pin 17 | PWM7H — PWM7 high-side output |
| Pin 18 | VSS — Ground |
| Pin 19 | VDD — Digital supply |
| Pin 20 | PWM8L — PWM8 low-side output |
| Pin 21 | PWM8H — PWM8 high-side output |
| Pin 22 | RC15 — I/O port C pin 15 |
| Pin 23 | RC13 — I/O port C pin 13 |
| Pin 24 | RC14 — I/O port C pin 14 |
| Pin 25 | RD0 — I/O port D pin 0 |
| Pin 26 | RD1 — I/O port D pin 1 |
| Pin 27 | RD2 — I/O port D pin 2 |
| Pin 28 | RD3 — I/O port D pin 3 |
| Pin 29 | RD4 — I/O port D pin 4 |
| Pin 30 | RD5 — I/O port D pin 5 |
| Pin 31 | RD6 — I/O port D pin 6 |
| Pin 32 | RD7 — I/O port D pin 7 |
| Pin 33 | RF0 — I/O port F pin 0 |
| Pin 34 | RF1 — I/O port F pin 1 |
| Pin 35 | RF2 — I/O port F pin 2 |
| Pin 36 | RF3 — I/O port F pin 3 |
| Pin 37 | RF4 — I/O port F pin 4 |
| Pin 38 | RF5 — I/O port F pin 5 |
| Pin 39 | RF6 — I/O port F pin 6 |
| Pin 40 | VSS — Ground |
| Pin 41 | VDD — Digital supply |
| Pin 42 | AVDD — Analog supply (4.5-5.5 V) |
| Pin 43 | AVSS — Analog ground |
| Pin 44 | AN0 — Analog input 0 / VREF+ |
| Pin 45 | AN1 — Analog input 1 / VREF- |
| Pin 46 | AN2 — Analog input 2 |
| Pin 47 | AN3 — Analog input 3 |
| Pin 48 | AN4 — Analog input 4 |
| Pin 49 | AN5 — Analog input 5 |
| Pin 50 | AN6 — Analog input 6 |
| Pin 51 | AN7 — Analog input 7 |
| Pin 52 | AN8 — Analog input 8 |
| Pin 53 | AN9 — Analog input 9 |
| Pin 54 | AN10 — Analog input 10 |
| Pin 55 | AN11 — Analog input 11 |
| Pin 56 | AN12 — Analog input 12 |
| Pin 57 | AN13 — Analog input 13 |
| Pin 58 | AN14 — Analog input 14 |
| Pin 59 | AN15 — Analog input 15 |
| Pin 60 | RG0 — I/O port G pin 0 |
| Pin 61 | RG1 — I/O port G pin 1 |
| Pin 62 | RG2 — I/O port G pin 2 |
| Pin 63 | RG3 — I/O port G pin 3 |
| Pin 64 | OSC1 — Oscillator input |
| Pin 65 | OSC2 — Oscillator output |
| Pin 66 | RA0 — I/O port A pin 0 |
| Pin 67 | RA1 — I/O port A pin 1 |
| Pin 68 | RA2 — I/O port A pin 2 |
| Pin 69 | RA3 — I/O port A pin 3 |
| Pin 70 | RA4 — I/O port A pin 4 |
| Pin 71 | RA5 — I/O port A pin 5 |
| Pin 72 | RA6 — I/O port A pin 6 |
| Pin 73 | RA8 — I/O port A pin 8 |
| Pin 74 | RA9 — I/O port A pin 9 |
| Pin 75 | RB0 — I/O port B pin 0 |
| Pin 76 | RB1 — I/O port B pin 1 |
| Pin 77 | RB2 — I/O port B pin 2 |
| Pin 78 | RB3 — I/O port B pin 3 |
| Pin 79 | RB4 — I/O port B pin 4 |
| Pin 80 | RB5 — I/O port B pin 5 |
Typische Anwendungen
DSPIC30F6013A-20E/PT ist geeignet für 7 Anwendungs: Three-Phase BLDC Motor Control, AC Induction Motor Field-Oriented Control (FOC), Uninterruptible Power Supplies (UPS), Solar Inverter Control, Industrial Automation and PLC Modules, Audio Signal Processing, Automotive Sensor Interfaces.
Three-Phase BLDC Motor Control
The DSPIC30F6013A-20E/PT's 8-pair PWM with dedicated DSP mode and 12-bit 200 ksps ADC makes it ideal for sensor-less and sensored BLDC motor drives. The DSP engine executes Clarke/Park transforms and PID loops within 20 MIPS, leaving headroom for CAN communication and fault handling. Operates directly on 5V rails, simplifying gate-driver interfaces for industrial 24V-bus systems.
Empfohlen
AC Induction Motor Field-Oriented Control (FOC)
Field-oriented control of AC induction motors requires fast current sampling and real-time vector rotation - exactly the workload the DSPIC30F6013A-20E/PT was designed for. The 20 MIPS budget handles Park/Clarke transforms and space-vector PWM at 16 kHz switching, while the 5V I/O eliminates level shifters for current-sense amplifiers. Used widely in industrial drives and HVAC compressors.
Empfohlen
Uninterruptible Power Supplies (UPS)
The DSPIC30F6013A-20E/PT's CAN peripheral, 12-bit ADC, and DSP engine make it suitable for digital control of UPS inverters, handling battery charging loops, sine-PWM output, and grid-sync phase detection in real time. 60 I/O provide ample headroom for relay drivers, status LEDs, and front-panel button inputs. The extended -40C to +125C temperature range meets industrial UPS requirements.
Empfohlen
Solar Inverter Control
Single-phase and small three-phase solar inverters benefit from the DSPIC30F6013A-20E/PT's combination of DSP throughput, PWM generation, and CAN communication for grid-tie signaling. The DSP engine performs MPPT, anti-islanding frequency detection, and current-loop control; the 5V supply simplifies gate-driver bias. Extended temperature rating supports outdoor inverter enclosures.
Empfohlen
Industrial Automation and PLC Modules
Programmable Logic Controller (PLC) analog input modules and motion-control cards benefit from the DSPIC30F6013A-20E/PT's 12-bit ADC with 16 channels, multiple UART/SPI/I2C for sensor networking, and CAN for fieldbus. The DSP engine handles PID loops and digital filtering, while the MCU core runs ladder-logic-equivalent sequencing code. Drop-in upgrade from older PIC18 PLC designs.
Empfohlen
Audio Signal Processing
The DSP engine of the DSPIC30F6013A-20E/PT can implement biquad filters, FFTs, and dynamic-range compressors in real time at audio sample rates up to ~150 kHz. Combined with the 12-bit DAC-equivalent PWM outputs and 5V analog headroom, it is suitable for active speaker crossovers, headphone amplifiers with DSP EQ, and effects pedals where low BOM cost is critical.
Empfohlen
Automotive Sensor Interfaces
Although the DSPIC30F6013A-20E/PT is not AEC-Q100 qualified, its extended -40C to +125C rating and 5V I/O make it useful in non-safety automotive subsystems such as HVAC flap actuators, mirror controls, and aftermarket sensor modules. The CAN peripheral supports OBD-II-style communication, while the ADC reads thermistor and pressure-sensor inputs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC30F6013A-20E/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC30F6013A-20E/PF | DSPIC30F6012A-20I/PT | DSPIC30F6011AT-30I/PT | DSPIC30F6010AT-20E/PT | DSPIC30F6013-20I/PF |
|---|---|---|---|---|---|---|
| Package | TQFP-80 (PT) 12x12 mm | TQFP-80 (PF) 12x12 mm - same family | TQFP-80 (PT) 12x12 mm - same | TQFP-80 (PT) 12x12 mm - same | TQFP-80 (PT) 12x12 mm - same | TQFP-80 (PF) - same family |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 132 KB | 132 KB | 96 KB | 132 KB | 96 KB | 132 KB |
| Maximum MIPS | 20 MIPS | 20 MIPS | 20 MIPS | 30 MIPS | 20 MIPS | 20 MIPS |
| Supply Voltage | 4.5 - 5.5 V | 4.5 - 5.5 V | 4.5 - 5.5 V | 2.5 - 5.5 V | 2.5 - 5.5 V | 4.5 - 5.5 V |
| Operating Temperature | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) | -40C to +85C (I) |
| Motor-Control PWM Outputs | 8 pairs | 8 pairs | 8 pairs | 8 pairs | 8 pairs | 8 pairs |
| CAN 2.0B | 1 | 1 | 1 | 1 | 1 | 1 |
| I/O Pins | 60 | 60 | 53 | 53 | 53 | 60 |
| Lifecycle Status | Active | Active | Active | Active | Active | Active |
Wichtigste Unterscheidungsmerkmale
- Largest Flash in 5V 80-pin dsPIC30F family (vs. DSPIC30F6012A-20I/PT)
- 5V supply tolerance vs 3.3V dsPIC33F upgrade path (vs. DSPIC33F family (e.g., DSPIC33FJ64MC706))
- Extended temperature grade option (vs. DSPIC30F6013A-20I/PF (Industrial -40C to +85C))
Designhinweise
Estimated: At VDD=5.0 V with the CPU running at 40 MHz and all peripherals active, the DSPIC30F6013A-20E/PT draws approximately 90-110 mA of core supply current. Place a 10 uF bulk tantalum plus 0.1 uF ceramic decoupling capacitor within 5 mm of every VDD/AVDD pin pair. AVDD should be tied to VDD through a ferrite bead or 10 ohm resistor to isolate the 12-bit ADC reference from digital switching transients; AVSS ties directly to VSS.
The 80-pin TQFP package has 0.4 mm pin pitch with thermal-pad-less design - use wide power traces on inner layers to carry return currents. Keep oscillator traces (OSC1, OSCC2) shorter than 12 mm and surround them with a ground guard ring. Motor-control PWM output traces should be routed away from analog inputs AN0-AN15 to minimize capacitive coupling; route the CANH/CANL differential pair as a 100 ohm impedance-controlled pair with 120 ohm termination at the bus end.
Do not connect any dsPIC30F I/O above VDD+0.3 V or below VSS-0.3 V; the absolute maximum ratings of -0.3 V to +6.0 V must be respected even on unused pins (configure them as outputs driving low). When migrating from dsPIC30F6013 (non-A) to the A-revision silicon, review the device errata document for fixed bugs related to the ADC, PWM, and CAN modules. Always pull MCLR to VDD through a 10 kohm resistor and add a 100 nF cap to ground for clean reset.
The 12-bit ADC achieves 200 ksps throughput but only meets 11.5 ENOB at full speed with low-impedance source. For best accuracy on AN0-AN15, add an external op-amp buffer and use the dedicated VREF+/VREF- inputs rather than the analog supply rails. Route AN0-AN7 as the highest-priority channels (closest to the analog ground AVSS) to reduce common-mode errors during multi-channel sampling.
Compliance-Informationen
Lead-free TQFP packaging per DigiChip datasheet listing; RoHS compliance confirmed by Microchip product page. Not AEC-Q100 qualified - choose dsPIC33 automotive parts for AEC-Q100 designs.