DSPIC33CK512MP605-E/PT - 16-bit 100MIPS DSC, 512KB | Microchip
Teilenummer: DSPIC33CK512MP605-E/PT ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.87 | $4,87 |
| 10 | $4.45 | $44,50 |
| 100 | $4.1 | $410,00 |
| 500 | $3.85 | $1.925,00 |
| 1.000 | $3.6 | $3.600,00 |
DSPIC33CK512MP605-E/PT Übersicht
A digital signal controller combines the computational architecture of a microcontroller with the math-acceleration hardware of a digital signal processor. In the embedded-systems hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes real-time control loops in C with single-cycle MAC and DSP instructions, making it the preferred class of device for closed-loop power conversion and motor control where deterministic 16-bit execution at 100 MIPS matters more than 32-bit address space.
Key differentiating features include the dual-panel flash architecture, which enables live firmware updates and partitioned boot operation (the memory may also be used unpartitioned from 0x000000 to 0x058000), on-chip op-amps that offload external analog signal-conditioning for current sensing, and 12-bit ADCs plus PWM peripherals purpose-built for digital power topologies such as totem-pole PFC, LLC, and buck converters.
The dsPIC33CK core integrates DSP enhanced instructions, a fast interrupt system, and peripherals such as CAN FD for automotive and industrial networking. The E-suffix temperature rating (-40C to +125C) supports under-hood and high-ambient industrial environments.
Typical applications include precision motor control (BLDC, PMSM, FOC servo drives), digital power supplies and solar micro-inverters, and automotive/industrial CAN FD nodes. The combination of op-amps, ADC, and PWM in one die shortens the sensor-to-actuator loop.
Design consideration: operate from a 3.0V to 3.6V supply and budget decoupling on all VDD/VDDCORE pairs per the manufacturer datasheet; dual-panel flash configuration must be set before relying on live-update bootloaders.
This page synthesizes distributor pricing (as of 2026-09-23), drop-in family alternatives, and design guidance beyond the raw datasheet.
Drop-in-Alternativen für DSPIC33CK512MP605-E/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33CK512MP605-E/PT (gleiche Bauform und Footprint) – abweichend in Operating Temperature, Package, PWM, Program Memory Size, Core.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33CK512MP605-I/PT
✅ Drop-In✓ Auf Lager
$1 / Stück
Datenblatt ansehen →DSPIC33CK512MP405-E/PT
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
DSPIC33CK512MP305-E/PT
✅ Drop-In✓ Auf Lager
$1.59 / Stück
Datenblatt ansehen →DSPIC33CK256MP205-E/PT
✅ Drop-In✓ Auf Lager
$3.92 / Stück
Datenblatt ansehen →DSPIC33CK256MP205-I/PT
✅ Drop-In✓ Auf Lager
$3.55 / Stück
Datenblatt ansehen →DSPIC33CK512MP605-E/PT Grenzwerte & elektrische Eigenschaften
| Core | dsPIC33CK 16-bit DSC core |
| CPU Speed | 100 MHz (100 MIPS) |
| Program Memory Size | 512 KB Flash (dual-panel) |
| RAM Size | 64 KB |
| Versorgungsspannung | 3.0 V to 3.6 V |
| CAN | CAN FD |
| Analog Peripherals | On-chip operational amplifiers, 12-bit ADCs |
| PWM | High-resolution PWM peripherals |
| Betriebstemperatur | -40C to +125C (extended, E-grade) |
| Gehäuse | 48-TQFP (7x7 mm) |
| Montageart | Surface Mount |
| Architecture | Single-core, fixed-point DSP with enhanced instructions |
| Flash Partitioning | Dual-panel (boot partition / live update capable) |
DSPIC33CK512MP605-E/PT 48-tqfp (7x7 mm) Pinbelegungsleitfaden
Pinbelegung für DSPIC33CK512MP605-E/PT (48-tqfp (7x7 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für DSPIC33CK512MP605-E/PT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DSPIC33CK512MP605-E/PT ist geeignet für 6 Anwendungs: Precision Motor Control (FOC Drives), Digital Power Supplies (PFC, LLC, Buck), Automotive CAN FD Nodes, Solar Micro-inverters and Power Conversion, Industrial Sensing and Condition Monitoring, Robotics and Servo Automation.
Precision Motor Control (FOC Drives)
The DSPIC33CK512MP605-E/PT fits precision motor control because its 100 MHz dsPIC33CK core executes 100 MIPS with single-cycle MAC instructions, closing field-oriented control loops for BLDC and PMSM motors at high PWM frequencies. On-chip op-amps amplify shunt current-sense signals internally, reducing part count and loop delay, while 12-bit ADCs synchronize sampling to the PWM center for low-noise current measurement per Microchip's design intent. In use, the PWM module drives a three-phase inverter, ADC samples phase currents, and the DSP core runs Clarke/Park transforms and PI compensators in real time. The quantified benefit is deterministic sub-microsecond interrupt latency and the -40C to +125C E-grade, enabling servo and traction drives in hot enclosures without derating.
Empfohlen
Digital Power Supplies (PFC, LLC, Buck)
Digital power supplies benefit from the DSPIC33CK512MP605-E/PT's high-resolution PWM, which achieves fine effective duty-cycle resolution for tight output regulation, and its fast 12-bit ADCs that sample voltage and current synchronously with each switching period. On-chip op-amps condition shunt and resistor-divider feedback without external amplifiers, shortening the sensor-to-PWM control path. In a typical totem-pole PFC or LLC stage, the 100 MIPS core executes compensators and protection (overcurrent, burst mode) in firmware, while dual-panel flash permits live firmware updates in the field. The E-grade -40C to +125C rating suits power stages with elevated ambient, and the 3.0V-3.6V supply integrates cleanly with standard bias rails.
Empfohlen
Automotive CAN FD Nodes
The integrated CAN FD controller makes the DSPIC33CK512MP605-E/PT a strong fit for automotive control nodes that also need real-time signal processing, such as pump control, actuator supervision, and sensor fusion modules. CAN FD provides 64-byte payloads and higher data rates than classical CAN for diagnostics and calibration traffic, while the 100 MIPS DSP core handles the local control loops independently. The extended -40C to +125C temperature grade covers under-hood and near-powertrain placements. In deployment, the dual-panel flash supports secure bootloader architectures and field firmware updates over the CAN network, and 512KB flash accommodates application code plus UDS-style diagnostic stacks with headroom.
Empfohlen
Solar Micro-inverters and Power Conversion
Grid-tied micro-inverters require simultaneous MPPT computation, DC-DC control, and grid-synchronization, which the DSPIC33CK512MP605-E/PT handles with its 100 MIPS core, high-resolution PWM for the power stage, and 12-bit ADC channels sampling panel voltage/current and grid waveforms. On-chip op-amps amplify current-shunt signals for cycle-by-cycle protection without external components. The single-chip integration reduces BOM cost and board area in the environmentally sealed enclosures typical of micro-inverters, while the extended +125C temperature rating tolerates rooftop thermal conditions. Dual-panel flash enables MPPT algorithm upgrades in the field over a communication link without interrupting energy harvest.
Empfohlen
Industrial Sensing and Condition Monitoring
Condition-monitoring and industrial sensing nodes use the DSPIC33CK512MP605-E/PT's 12-bit ADCs and on-chip op-amps to acquire vibration, current, and temperature signals, then apply DSP instructions (FIR/IIR filtering, FFT primitives) at 100 MIPS to extract features locally. The 64KB RAM buffers waveform captures for burst analysis, and 512KB flash stores feature libraries and logging. CAN FD or other serial interfaces stream results to a plant network. The E-grade temperature range of -40C to +125C permits mounting directly on motors, drives, and switchgear where ambient temperatures exceed standard industrial limits, enabling edge analytics at the point of measurement rather than in a remote controller.
Empfohlen
Robotics and Servo Automation
Robot joint controllers and servo amplifiers leverage the DSPIC33CK512MP605-E/PT's deterministic 100 MIPS execution for cascaded position/velocity/current loops at kHz-scale update rates. On-chip op-amps and 12-bit ADCs digitize motor phase currents with minimal external circuitry, while high-resolution PWM drives the inverter with fine granularity for smooth low-speed torque. Encoders and communication (CAN FD or serial) interface through peripheral pins, and the dual-panel flash supports live tuning parameter and firmware updates during commissioning. The extended -40C to +125C grade suits drives integrated inside robot arms where cooling is limited, maintaining full specification at elevated ambient temperatures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33CK512MP605-E/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33CK512MP605-I/PT | DSPIC33CK512MP405-E/PT | DSPIC33CK512MP305-E/PT | DSPIC33CK256MP205-E/PT |
|---|---|---|---|---|---|
| Package | 48-TQFP (7x7) | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same | 48-TQFP (7x7) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| CPU Speed | 100 MHz / 100 MIPS | 100 MHz / 100 MIPS | 100 MHz / 100 MIPS | 100 MHz / 100 MIPS | 100 MHz / 100 MIPS |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 256 KB |
| Operating Temperature | -40C to +125C (E) | -40C to +85C (I) | -40C to +125C (E) | -40C to +125C (E) | -40C to +125C (E) |
| Analog Peripherals | Op-amps + 12-bit ADCs (highest channel count) | Same as this product | Reduced vs MP605 | Reduced vs MP605 | Reduced, 256KB flash |
Wichtigste Unterscheidungsmerkmale
- Extended +125C temperature grade (vs. DSPIC33CK512MP605-I/PT)
- Largest analog/PWM peripheral set in the 48-TQFP dsPIC33CK512MP family (vs. DSPIC33CK512MP305-E/PT)
- Double the flash of the 256MP205 tier at same cost class (vs. DSPIC33CK256MP205-E/PT)
Designhinweise
Supply the DSPIC33CK512MP605-E/PT from a clean 3.3V rail within the 3.0V-3.6V range. Place 0.1uF ceramic decoupling capacitors at every VDD pin pair plus bulk capacitance (estimated: 4.7uF-10uF per device) near the package, and follow the datasheet connection for the on-chip core regulator external capacitor. In digital-power applications sharing a rail with gate drivers, isolate the DSC supply with an LC filter to prevent switching transients from corrupting the ADC reference.
Route high-resolution PWM outputs to the gate-driver stage with short traces and series resistors to control edge ringing. Keep the current-sense shunt-to-op-amp inputs as Kelvin connections; the on-chip op-amps only perform well when the PCB does not inject ground-bounce into their inputs. Assign the ADC channels used for feedback to pins farthest from PWM switching nodes, and use a solid ground plane under the 48-TQFP.
Do not exceed the 3.6V absolute maximum supply, a common failure cause when 5V peripherals are accidentally wired to DSC pins. Verify flash partitioning configuration (dual-panel vs unpartitioned 0x000000-0x058000) before shipping bootloaders, as the setting affects reset vectors. Finally, when substituting the -I variant for the -E variant, re-verify junction temperature: the industrial part is rated only to +85C.
Compliance-Informationen
Compliance status was not stated in the provided web data; verify on Microchip's product page or the LCSC product-detail listing before procurement.
