DSPIC33EV64GM003T-I/M5 - 16-bit 5V DSC 64KB Flash | Microchip
Teilenummer: DSPIC33EV64GM003T-I/M5 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $3.26 | $3,26 |
| 10 | $3.05 | $30,50 |
| 100 | $2.82 | $282,00 |
| 500 | $2.58 | $1.290,00 |
| 1.000 | $2.39 | $2.390,00 |
DSPIC33EV64GM003T-I/M5 Übersicht
A digital signal controller combines the compute architecture of a microcontroller with DSP-oriented math capability in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs: it executes C code and real-time control loops while also performing multiply-accumulate operations needed for field-oriented motor control, digital power conversion, and sensor signal processing. The dsPIC33EV family extends this with 5V tolerant operation for harsh industrial and automotive environments.
Key differentiating features include ECC-protected Flash for functional-safety oriented designs, three integrated op-amps that offload external analog signal-conditioning circuitry, the CTMU for capacitive touch and time-of-flight measurements, and multiple motor-control PWM modules with complementary outputs and dead-time control.
Architecturally, the device uses the dsPIC 16-bit core with DSP instruction extensions, single-cycle MAC, and hardware divide support. The extended-temperature -40C to +125C 'I' grade makes it suitable for under-hood and industrial-floor conditions.
Typical applications include brushless DC and PMSM motor drives, digital power supplies (LLC, totem-pole PFC), automotive auxiliary systems, and industrial sensing nodes leveraging the on-chip op-amps and CTMU.
Design consideration: take advantage of the internal op-amps to reduce BOM cost, but verify gain-bandwidth against your control-loop requirements; supply decoupling on all VDD/VDDCORE pins is essential for the 60-70 MHz core clock.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet alone.
Drop-in-Alternativen für DSPIC33EV64GM003T-I/M5 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33EV64GM003T-I/M5 (gleiche Bauform und Footprint) – abweichend in Core, Package, RoHS Status, Operating Temperature, Flash Program Memory.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33EV128GM003T-I/M5
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
DSPIC33EV256GM003T-I/M5
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.05 / Stück
Datenblatt ansehen →DSPIC33EV32GM003T-I/M5
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$2.96 / Stück
Datenblatt ansehen →DSPIC33EV64GM002T-I/M5
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
DSPIC33EV64GM103T-I/M5
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →DSPIC33EV64GM003T-I/M5 Grenzwerte & elektrische Eigenschaften
| Core Processor | dsPIC33E 16-bit |
| Core Speed | 60 MHz (70 MIPS class, dsPIC33EV family) |
| Program Memory | 64 KB ECC Flash |
| RAM Size | 8 KB |
| Versorgungsspannung | 5 V |
| Motor-Control PWM Channels | 6 MC PWM |
| On-Chip Op-Amps | 3 |
| CTMU | Yes (Charge Time Measurement Unit) |
| Gehäuse | 36-UQFN (5x5 mm) exposed pad |
| Betriebstemperatur | -40C to +125C (I grade) |
| Montageart | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
| RoHS-Status | Compliant |
| Series | dsPIC33EV, Functional Safety (FuSa) |
DSPIC33EV64GM003T-I/M5 36-uqfn (5x5 mm) exposed pad Pinbelegungsleitfaden
Pinbelegung für DSPIC33EV64GM003T-I/M5 (36-uqfn (5x5 mm) exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für DSPIC33EV64GM003T-I/M5.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DSPIC33EV64GM003T-I/M5 ist geeignet für 6 Anwendungs: BLDC / PMSM Motor Drives, Digital Power Supplies (LLC / PFC), Automotive Auxiliary Systems, Capacitive Touch and Sensing Interfaces, Industrial Automation and Appliances, Embedded Signal Processing Nodes.
BLDC / PMSM Motor Drives
The DSPIC33EV64GM003T-I/M5 fits motor control because its 6 motor-control PWM channels provide complementary outputs with hardware dead-time insertion, eliminating external dead-time logic, and its 16-bit DSP core executes field-oriented control (FOC) loops at 60 MHz with single-cycle MAC instructions. The 5V supply directly drives gate-driver inputs common in industrial drives without level shifting. In a typical PMSM drive, the three on-chip op-amps amplify shunt-resistor phase-current signals before the ADC, removing three external op-amp packages from the BOM. At 64KB ECC Flash, the complete FOC stack plus sensorless observer algorithms fits without external memory. Trade-off: verify op-amp gain-bandwidth against switching frequency to keep current-sense loop phase margin adequate.
Empfohlen
Digital Power Supplies (LLC / PFC)
The DSPIC33EV64GM003T-I/M5 suits digital power conversion because its high-resolution PWM and 60 MHz DSP core support the tight timing resolution required by LLC and totem-pole PFC topologies, while the 5V rail simplifies interface to gate drivers. The ECC Flash protects control firmware from bit corruption in high-dV/dt switch-node environments - a meaningful reliability advantage over non-ECC MCUs. Designers typically implement voltage-mode or current-mode control in a 50-100 kHz ISR using the DSP MAC for compensator math. The CTMU can support precision time measurements for zero-crossing detection. Note that 64KB Flash is ample for control law plus housekeeping; only multi-topology firmware requires the 128KB or 256KB memory variants on the identical footprint.
Empfohlen
Automotive Auxiliary Systems
The DSPIC33EV64GM003T-I/M5 is positioned by Microchip for automotive applications in harsh environments, and its -40C to +125C 'I' temperature grade covers under-hood and near-engine locations. The 5V supply matches legacy 12V-nominal automotive sensor signaling, and ECC Flash supports functional-safety oriented development, as this part belongs to the dsPIC33EV Functional Safety (FuSa) series. Typical roles include pump and fan control using the 6 MC PWM channels, valve actuation, and sensor hubs exploiting the on-chip op-amps for signal conditioning of resistive bridges. The compact 5x5 mm 36-UQFN conserves board area in actuator modules. Always confirm the specific qualification level for your order code with Microchip during automotive program sign-off.
Empfohlen
Capacitive Touch and Sensing Interfaces
The CTMU (Charge Time Measurement Unit) on the DSPIC33EV64GM003T-I/M5 provides precise charge-based time measurements, enabling capacitive touch buttons, sliding controls, and ultrasonic time-of-flight measurement without a dedicated touch controller. Combined with the three on-chip op-amps, the device can buffer and amplify sensor outputs directly, allowing a resistive or capacitive sensor front end to be implemented largely inside the chip. In appliance and industrial HMI panels, the 5V operation simplifies direct drive of LEDs and interface to other 5V logic on the same board. The 64KB ECC Flash retains calibration tables and touch-decoding firmware comfortably. Performance consideration: the CTMU current sources need careful PCB guard-ring layout for high-sensitivity applications.
Empfohlen
Industrial Automation and Appliances
Microchip explicitly targets the dsPIC33EV family at harsh-environment appliance and industrial applications, and the DSPIC33EV64GM003T-I/M5 exemplifies this fit: 5V noise immunity reduces false triggering on factory floors with motor-driven equipment, while the -40C to +125C range covers unconditioned enclosures. The DSP-class math supports real-time control (PID, resonance damping) for pumps, compressors, and fans, and the 6 PWM channels drive inverter stages directly. On-chip op-amps condition current and voltage feedback to reduce component count in cost-sensitive appliance boards. The 60 MHz core leaves margin for communication stacks (UART/SPI) running concurrently with control loops. The compact UQFN-36 with exposed pad also aids thermal dissipation in sealed plastic housings.
Empfohlen
Embedded Signal Processing Nodes
With a 16-bit DSP core, single-cycle MAC, 8KB RAM, and three integrated op-amps, the DSPIC33EV64GM003T-I/M5 serves as a compact signal-conditioning and processing node for vibration, acoustic, and current-signature monitoring. Analog signals can be amplified on-chip, digitized, and filtered with DSP instructions, then reported over serial links - reducing the external analog chain to anti-alias filters. The ECC Flash protects stored algorithms and calibration data in electrically noisy environments, and the 5V operation eases integration into legacy industrial equipment. The 64KB program space accommodates FFT and classification code for condition-monitoring applications. For heavier spectral analysis needs, migrate to the pin-compatible 128KB or 256KB GM003 variants without PCB changes.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33EV64GM003T-I/M5 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33EV128GM003T-I/M5 | DSPIC33EV256GM003T-I/M5 | DSPIC33EV32GM003T-I/M5 | DSPIC33EV64GM002T-I/M5 | DSPIC33EV64GM103T-I/M5 |
|---|---|---|---|---|---|---|
| Package | 36-UQFN (5x5 mm) | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same | 36-UQFN (5x5 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Flash | 64 KB ECC | 128 KB ECC | 256 KB ECC | 32 KB ECC | 64 KB ECC | 64 KB ECC |
| Core Speed | 60 MHz (70 MIPS class) | 60 MHz (70 MIPS class) | 60 MHz (70 MIPS class) | 60 MHz (70 MIPS class) | 60 MHz (70 MIPS class) | 60 MHz (70 MIPS class) |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C | -40C to +125C |
| Series / Qualification Focus | dsPIC33EV Functional Safety (FuSa) | dsPIC33EV FuSa | dsPIC33EV FuSa | dsPIC33EV FuSa | dsPIC33EV FuSa | dsPIC33EV FuSa |
Wichtigste Unterscheidungsmerkmale
- Three on-chip operational amplifiers reduce BOM cost (vs. DSPIC33EV64GM002T-I/M5)
- Active, Functional Safety (FuSa) series part with ECC Flash (vs. DSPIC33EP64MC504-E/TL)
- Memory scalability on an identical footprint (vs. DSPIC33EV128GM003T-I/M5)
Designhinweise
The dsPIC33EV family operates from a 5V supply with internal core regulation (VDDCORE). Decouple all VDD pins with 100 nF ceramic capacitors placed within 2 mm of each pin, plus at least one 4.7 uF bulk capacitor near the supply entry. The exposed pad of the 36-UQFN connects to VSS - solder it to a solid ground plane, both for thermal dissipation and for a low-inductance return path for the 60 MHz core. Verify VDD ripple stays well below datasheet limits when switching PWM stages share the same rail.
Do not confuse the 'T' in DSPIC33EV64GM003T-I/M5 with a different device: it denotes Tape & Reel packaging, not a silicon variant. Also note that GM002 vs GM003 vs GM103 order codes differ in peripheral allocation (op-amps, CTMU, pin multiplexing), so firmware written for GM003 analog blocks will not run unchanged on GM002 despite identical footprints. Consult the dsPIC33EV family datasheet's pin and peripheral tables before swapping order codes in production.
For motor-control layouts, route the 6 MC PWM outputs to gate drivers with matched trace lengths to minimize dead-time skew between phases. Keep the op-amp input traces (shunt sense lines) short and guarded away from PWM switching nodes to prevent dV/dt coupling into the current-feedback path; the ECC Flash helps firmware integrity but cannot recover corrupted analog measurements. Place the 0.1 uF VREF decoupling capacitor directly at the reference pin for ADC accuracy.
Estimated: in a sealed enclosure at 85C ambient with typical industrial DSC power consumption (order of 100-200 mV x 30-40 mA, i.e. roughly 0.2 W), the 36-UQFN with exposed pad soldered to a 2x2 via'd ground pour keeps junction rise modest; use the datasheet theta_JA figure for your board stack-up rather than assuming. Verify with thermal simulation for >125C ambient automotive installs.
Compliance-Informationen
RoHS compliant and lead-free per distributor listings (PCBElectronics, LCSC). Part belongs to Microchip dsPIC33EV Functional Safety (FuSa) series per Octopart data; specific AEC-Q100 qualification level not stated in provided data - confirm with Microchip.
