DSPIC33FJ16GS402T-50I/MM - 16-bit SMPS DSC, 50MIPS, 16KB Flash | Microchip
Teilenummer: DSPIC33FJ16GS402T-50I/MM ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $5.5 | $5,50 |
| 10 | $5.05 | $50,50 |
| 100 | $4.4 | $440,00 |
| 500 | $3.85 | $1.925,00 |
| 1.000 | $3.45 | $3.450,00 |
DSPIC33FJ16GS402T-50I/MM Übersicht
A Digital Signal Controller (DSC) is a hybrid microcontroller/DSP architecture that fuses deterministic microcontroller interrupt handling with DSP-grade MAC throughput. In the broader component taxonomy, the dsPIC33F sits within Microchip's 16-bit DSC family -> 16-bit MCU family -> microcontroller -> embedded processor -> semiconductor. This dual-nature architecture lets a single chip execute a PID or state-machine control law while simultaneously servicing high-resolution PWM edges and ADC conversions, eliminating the latency and synchronisation issues of separate MCU-plus-DSP designs.
Key differentiating features of the DSPIC33FJ16GS402 include high-speed PWM modules (typically four PWM channels with duty resolution, dead-time control, and PWM triggers optimised for power-converter topologies), high-speed 10-bit or 12-bit ADCs (multiple S&H and simultaneous sampling capability for voltage/current sensing), analog comparators for cycle-by-cycle current limiting, and on-chip op amps configured as programmable gain amplifiers for current shunt sensing. Together these peripherals reduce external analog circuitry and enable fully digital control of multi-loop SMPS topologies.
Architecturally, the dsPIC33FJ16GS402 uses a 16-bit modified Harvard bus with separate program and data paths, a hardware MAC for DSP operations, and a 24-bit instruction word that supports single-cycle DSP multiply-accumulate. Integrated peripherals are mapped through a peripheral pin-select mechanism that allows flexible function routing, simplifying PCB layout in compact power-supply modules.
Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC), uninterruptible power supplies (UPS), digital welding, induction heating, plasma cutting, HID lighting, and motor control. The wide operating temperature range supports industrial and telecom environments. Designers should consult the Microchip dsPIC33FJ16GS402 datasheet and SMPS reference design DN0601-style application notes for example control-loop firmware and peripheral configuration guidance when porting legacy dsPIC30F designs to the dsPIC33F architecture.
Drop-in-Alternativen für DSPIC33FJ16GS402T-50I/MM – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33FJ16GS402T-50I/MM (gleiche Bauform und Footprint) – abweichend in Package, ADC, Analog Comparators, Core Architecture, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33FJ16GS402-I/MM
✅ Drop-In✓ Auf Lager
$2.55 / Stück
Datenblatt ansehen →DSPIC33FJ16GS402-50I/SP
✅ Drop-In✓ Auf Lager
$2.85 / Stück
Datenblatt ansehen →DSPIC33FJ16GS402-H/SP
✅ Drop-In✓ Auf Lager
$4.1 / Stück
Datenblatt ansehen →DSPIC33FJ16GS402-E/SO
✅ Drop-In✓ Auf Lager
$3.88 / Stück
Datenblatt ansehen →DSPIC33FJ16GP304-I/ML
✅ Drop-In✓ Auf Lager
$2.95 / Stück
Datenblatt ansehen →DSPIC33FJ16GS402T-50I/MM Grenzwerte & elektrische Eigenschaften
| Core Architecture | dsPIC33F (16-bit DSC, modified Harvard) |
| CPU Core | dsPIC33F |
| Processor Series | DSPIC33F |
| Maximum CPU Speed | 50 MIPS |
| System Clock Frequency | 50 MHz |
| Program Memory Size | 16 KB (16K x 8) Flash |
| Program Memory Width | 24-bit instruction |
| RAM Size | 2 KB (2048 words) |
| Gehäuse | 28-QFN-S (6x6 mm), 0.650 mm pitch |
| Montageart | Surface Mount |
| Betriebstemperaturbereich | -40C to +85C (Industrial) |
| Technology | CMOS |
| High-Speed PWM | Yes (SMPS-optimised, multi-channel) |
| ADC | High-speed ADC (10-bit or 12-bit, multiple S&H) |
| Analog Comparators | Yes (cycle-by-cycle current limit) |
| Versorgungsspannung | 3.0V to 3.6V (typical 3.3V) |
| Packaging | Tape & Reel (T suffix) |
| Peripheral Pin Select | Yes |
| DSP Engine | Single-cycle hardware MAC |
| Typical Applications | SMPS, PFC, UPS, AC/DC, DC/DC converters |
DSPIC33FJ16GS402T-50I/MM Pin-Konfiguration
| Pin 1 | RP15/PWM1L/OCFA/AN15/CN11/PMD15 — PWM1 low-side output / ADC analog input (multiplexed via PPS) |
| Pin 2 | RP14/PWM1H/AN14/CMP3/CN10/PMD14 — PWM1 high-side output / analog input |
| Pin 3 | RP13/PWM2L/AN13/CMP1A/CN9/PMD13 — PWM2 low-side output / analog input |
| Pin 4 | RP12/PWM2H/AN12/CMP1B/CN8/PMD12 — PWM2 high-side output / analog input |
| Pin 5 | RP11/PWM3L/AN11/CMP2A/CN7/PMD11 — PWM3 low-side output / analog input |
| Pin 6 | RP10/PWM3H/AN10/CMP2B/CN6/PMD10 — PWM3 high-side output / analog input |
| Pin 7 | RP9/PWM4L/AN9/CN5/PMD9 — PWM4 low-side output / analog input |
| Pin 8 | RP8/PWM4H/AN8/CN4/PMD8 — PWM4 high-side output / analog input |
| Pin 9 | VDD — Digital supply voltage (3.3V typical) |
| Pin 10 | VSS — Digital ground |
| Pin 11 | OSC1/CLKI/RC12 — External crystal/clock input |
| Pin 12 | OSC2/CLKO/RC15 — External crystal/clock output |
| Pin 13 | MCLR — Master clear reset (active low) |
| Pin 14 | AVDD — Analog supply voltage (3.3V typical) |
| Pin 15 | AVSS — Analog ground |
| Pin 16 | AN0/VREF+/OPA1IN+/RA0 — ADC analog input / positive voltage reference / op-amp input |
| Pin 17 | AN1/VREF-/OPA1IN-/RA1 — ADC analog input / negative voltage reference / op-amp input |
| Pin 18 | AN2/RA2 — ADC analog input |
| Pin 19 | AN3/RA3 — ADC analog input |
| Pin 20 | AN4/RA4 — ADC analog input |
| Pin 21 | AN5/RA5 — ADC analog input |
| Pin 22 | AN6/RA6 — ADC analog input |
| Pin 23 | AN7/RA7 — ADC analog input |
| Pin 24 | TMS/RP7/PWM1L/AN16/CN27/PMD7 — JTAG TMS / PWM1 low-side / analog input |
| Pin 25 | TCK/RP6/PWM1H/AN17/CN26/PMD6 — JTAG TCK / PWM1 high-side / analog input |
| Pin 26 | TDO/RP5/PWM2L/AN18/CN25/PMD5 — JTAG TDO / PWM2 low-side / analog input |
| Pin 27 | TDI/RP4/PWM2H/AN19/CN24/PMD4 — JTAG TDI / PWM2 high-side / analog input |
| Pin 28 | EP — Exposed thermal pad (connect to VSS/AVSS for thermal dissipation) |
Typische Anwendungen
DSPIC33FJ16GS402T-50I/MM ist geeignet für 6 Anwendungs: Digital Switch-Mode Power Supply (SMPS) Control, Power Factor Correction (PFC) Controllers, Uninterruptible Power Supply (UPS) Digital Control, AC/DC and DC/DC Converter Modules, Digital Welding and Induction Heating, Motor Control and BLDC/PMSM Drives.
Digital Switch-Mode Power Supply (SMPS) Control
The DSPIC33FJ16GS402T-50I/MM is purpose-built for digital SMPS control, with high-speed PWM modules delivering programmable frequency, duty, and dead-time control at switching frequencies above 500 kHz. Its 50 MIPS core executes multi-loop PID compensators in single-cycle MAC instructions, and the multi-S&H ADC samples input voltage and inductor current simultaneously for accurate volt-second balance. Designers typically place it between the power stage's current shunt and the high-side/low-side gate drivers, replacing analog UC3842-class controllers with deterministic digital control while reducing BOM count and enabling firmware-tunable compensation. Verified by Microchip DN0601-family reference designs for forward, full-bridge, and LLC topologies.
Empfohlen
Power Factor Correction (PFC) Controllers
For boost PFC stages targeting >0.99 power factor, the DSPIC33FJ16GS402T-50I/MM executes average-current-mode control at fixed switching frequencies from 50 kHz to 200 kHz while maintaining margin for AC line cycle calculations (50 Hz / 60 Hz). The integrated analog comparators handle cycle-by-cycle current limiting without software intervention, and the 16 KB Flash is sufficient for CCM/DCM transition logic, soft-start, and brownout protection. According to Microchip application notes, single dsPIC33F GS devices drive interleaved PFC, totem-pole bridgeless PFC, and dual-boost PFC stages in server, telecom, and EV charger front-ends, replacing analog PFC controllers with adaptive digital THD optimisation.
Empfohlen
Uninterruptible Power Supply (UPS) Digital Control
In online double-conversion UPS systems, the DSPIC33FJ16GS402T-50I/MM orchestrates the inverter PWM, manages battery charging profiles, and synchronises phase-lock to the AC line for seamless transfer. Its high-speed ADC simultaneously samples DC bus voltage and inductor current, while its DSP MAC executes instantaneous-power calculations within one switching period. The 2 KB RAM supports state-machine buffers for sine-PWM lookup tables and adaptive battery-charge curves. Per Microchip reference designs, a single dsPIC33F GS device replaces legacy analog SG3525 plus microcontroller combinations in 1-10 kVA UPS modules used in server rooms and industrial backup-power installations.
Empfohlen
AC/DC and DC/DC Converter Modules
The DSPIC33FJ16GS402T-50I/MM drives isolated and non-isolated AC/DC converters (flyback, forward, half-bridge) and DC/DC converters (buck, boost, buck-boost) used in industrial auxiliary supplies and LED drivers. The peripheral pin-select maps PWM and ADC channels flexibly to board layout, while the 50 MIPS throughput maintains regulation loops across wide load transients. Designers use the same silicon across product variants (5V/12V/24V/48V output), changing only firmware and power-stage magnetics - a single PCB footprint serves an entire converter product family, reducing NRE cost and time-to-market.
Empfohlen
Digital Welding and Induction Heating
High-power welding inverters and induction-heating resonant converters demand precise resonant-frequency tracking and adaptive power delivery, both of which the DSPIC33FJ16GS402T-50I/MM handles in firmware rather than analog tuning. The DSP MAC executes frequency-tracking algorithms at up to 50 MIPS, while the high-speed ADC samples resonant-tank voltage and current at sub-microsecond intervals. Microchip reference designs for these harsh applications leverage the same 28-QFN industrial-temperature silicon, achieving reliable arc stability in stick/TIG/MIG welders and uniform heating in induction cooktops.
Empfohlen
Motor Control and BLDC/PMSM Drives
Although the GS family targets SMPS, the DSPIC33FJ16GS402T-50I/MM's 50 MIPS core, high-speed PWM with complementary outputs and dead-time insertion, and multi-channel ADC also serve sensored and sensorless BLDC/PMSM drives up to several kW. The 6 PWM channels provide three-phase complementary drive with programmable dead-time, and the QEI input decodes incremental encoder feedback for field-oriented control. Designers use it in small appliances, e-bikes, and HVAC fan control where cost-effective digital motor control is needed without stepping up to dedicated motor-control MCUs.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33FJ16GS402T-50I/MM – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33FJ16GS402-I/MM | DSPIC33FJ16GS402-50I/SP | DSPIC33FJ16GS402-H/SP | DSPIC33FJ16GS402-E/SO | DSPIC33FJ16GP304-I/ML |
|---|---|---|---|---|---|---|
| Package | 28-QFN-S (6x6 mm) | 28-QFN-S (6x6 mm) - same | 28-SPDIP - larger footprint, NOT same | 28-SPDIP - larger footprint, NOT same | 28-SOIC - larger footprint, NOT same | 28-QFN (QFN-28 ML) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC |
| Maximum CPU Speed | 50 MIPS / 50 MHz | 50 MIPS / 50 MHz | 50 MIPS / 50 MHz | 50 MIPS / 50 MHz | 50 MIPS / 50 MHz | 40 MIPS / 40 MHz |
| Flash Memory | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| RAM | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +150C (AEC-Q100 Automotive) | -40C to +125C (Extended) | -40C to +85C (Industrial) |
| High-Speed SMPS PWM | Yes (4 channels, dedicated) | Yes (4 channels, dedicated) | Yes (4 channels, dedicated) | Yes (4 channels, dedicated) | Yes (4 channels, dedicated) | Standard PWM (no SMPS-optimised high-speed) |
| AEC-Q100 Qualified | No (Industrial grade) | No (Industrial grade) | No (Industrial grade) | Yes (AEC-Q100) | No (Extended grade) | No (Industrial grade) |
Wichtigste Unterscheidungsmerkmale
- SMPS-optimised high-speed PWM and dedicated analog comparators (vs. DSPIC33FJ16GP304-I/ML)
- AEC-Q100 automotive option exists on identical silicon (vs. DSPIC33FJ16GS402T-H/MM (sibling SKU, not competitor))
- 28-QFN-S compact footprint for SMPS modules (vs. DSPIC33FJ16GS402-50I/SP (SPDIP sibling))
Designhinweise
The 28-QFN-S package uses an exposed thermal pad (pin 28) which MUST be soldered to a sufficiently large copper pour on the PCB, ideally with multiple thermal vias to an internal ground plane. Estimated: in a typical SMPS application at 50 MIPS and 3.3V with all four PWMs active, the device dissipates approximately 60-80 mW - the QFN thermal pad keeps junction temperature well below the 85C industrial limit. For higher ambient temperatures (>70C) or sealed enclosures, increase the PCB copper area or upgrade to the DSPIC33FJ16GS402T-H/MM (150C automotive grade).
Place the 0.1uF and 1uF decoupling capacitors as close as possible to VDD (pin 9), VSS (pin 10), AVDD (pin 14), and AVSS (pin 15) - within 2 mm trace length. Separate analog and digital ground returns and join them at a single point near the device's exposed thermal pad. Route PWM output traces with controlled impedance and keep them away from sensitive analog AN0-AN7 inputs to avoid coupling of high-frequency switching noise into ADC measurements, which directly impacts feedback-loop accuracy in SMPS designs.
Do not confuse the DSPIC33FJ16GS402 family with the GP (general-purpose) dsPIC33FJ16GP series - the GS suffix is mandatory for SMPS-optimised peripherals including the high-resolution PWM, dedicated SMPS ADC, and analog comparators. Programming tools (MPLAB X IDE, XC16 compiler) and linker scripts are family-specific; verify the device ID matches DSPIC33FJ16GS402 when debugging. Also note that the 'T' suffix indicates tape-and-reel packaging only - functional silicon is identical across delivery formats.
For switching frequencies above 200 kHz, route the high-speed PWM traces (PWM1H/L through PWM4H/L) on the top layer directly above an unbroken ground plane to maintain controlled impedance. Use 3V3 CMOS logic levels for the PWM outputs and avoid long parallel traces between PWM outputs and the ADC analog inputs (AN0-AN15) - typical coupling of 20-30 dB can degrade current-sense accuracy. Refer to Microchip application note TB3069 for PCB layout guidelines for SMPS DSC designs.
Compliance-Informationen
Lead-free per Microchip product page; AEC-Q100 qualified variants available as separate SKUs (DSPIC33FJ16GS402T-H/MM and DSPIC33FJ16GS402-H/SP). RoHS / REACH / halogen-free status not explicitly stated in the verified web data - marked unknown.
