DSPIC33FJ32MC102T-E/SO - 16-bit DSC 16 MIPS 32KB Flash | Microchip
Teilenummer: DSPIC33FJ32MC102T-E/SO ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $6.12 | $6,12 |
| 10 | $5.58 | $55,80 |
| 100 | $4.95 | $495,00 |
| 500 | $4.42 | $2.210,00 |
| 1.000 | $3.96 | $3.960,00 |
DSPIC33FJ32MC102T-E/SO Übersicht
A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy, a DSC sits between a general-purpose MCU and a dedicated DSP, providing hardware multiply-accumulate (MAC) and DSP instruction support for control-loop mathematics such as PID and field-oriented control, while retaining familiar MCU peripherals like UART, SPI, and I2C.
Key features of this part include motor control PWM (MCPWM) outputs, three analog comparators, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurements, a real-time clock and calendar (RTCC), and Peripheral Pin Select (PPS) for flexible peripheral-to-pin remapping. Connectivity covers I2C, SPI, UART/USART, IrDA, and LINbus, addressing both automotive and industrial communication needs.
The architecture runs at up to 30 MIPS equivalent clocking with 5V-tolerant I/O pins (pin-specific), up to 16 mA or 12 mA non-standard sink/source capability on selected pins, and three external interrupts (two remappable). FLASH is rated for in-circuit self-programming, supporting field firmware updates in deployed motor drives.
Typical applications include BLDC and PMSM motor control, switch-mode power supplies, digital ballasts, battery chargers, and automotive auxiliary systems - the AEC-Q100 qualification of this E-temperature grade part makes it suitable for under-hood-adjacent environments.
Design consideration: the core operates from 3.0V to 3.6V (nominal 3.3V), so level shifting is required when interfacing with 5V legacy peripherals despite 5V-tolerant inputs.
This page synthesizes distributor pricing, verified drop-in alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.
Drop-in-Alternativen für DSPIC33FJ32MC102T-E/SO – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit DSPIC33FJ32MC102T-E/SO (gleiche Bauform und Footprint) – abweichend in Package, Core Architecture, Operating Temperature, RoHS Status, RTCC.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
DSPIC33FJ32MC102-E/SO
✅ Drop-In✓ Auf Lager
$3.78 / Stück
Datenblatt ansehen →DSPIC33FJ32MC102T-I/SO
✅ Drop-In✓ Auf Lager
$3.3 / Stück
Datenblatt ansehen →DSPIC33FJ32MC101T-I/SO
✅ Drop-In✓ Auf Lager
$3.32 / Stück
Datenblatt ansehen →DSPIC33FJ32MC101-E/SO
✅ Drop-In✓ Auf Lager
$3.75 / Stück
Datenblatt ansehen →DSPIC33FJ12MC202T-E/SO
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
$3.05 / Stück
Datenblatt ansehen →DSPIC33FJ32GP202T-I/SO
✅ Drop-In ⚠️ Spezifikationen ungeprüft✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →DSPIC33FJ32MC102T-E/SO Grenzwerte & elektrische Eigenschaften
| Core Architecture | 16-bit dsPIC33F DSC |
| Maximum MIPS | 16 MIPS |
| Program Memory (FLASH) | 32KB (11K x 24) |
| RAM | 2KB (1K x 16) |
| Versorgungsspannung | 3.0 V to 3.6 V |
| Betriebstemperatur | -40C to +125C (E grade) |
| Gehäuse | 28-SOIC |
| Connectivity | I2C, SPI, UART/USART, IrDA, LINbus |
| Motor Control PWM | MCPWM peripheral |
| Analog Comparators | 3 |
| CTMU | Charge Time Measurement Unit included |
| RTCC | Real-Time Clock and Calendar |
| Peripheral Pin Select | PPS supported |
| External Interrupts | 3 (two remappable) |
| I/O Sink/Source | 10 mA or 6 mA standard; up to 16 mA or 12 mA non-standard, pin-specific |
| 5V Tolerant I/O | Yes (pin-specific) |
| Qualification | AEC-Q100 qualified |
| Montageart | Surface Mount |
| Packaging | Tape & Reel (T suffix) |
DSPIC33FJ32MC102T-E/SO 28-soic Pinbelegungsleitfaden
Pinbelegung für DSPIC33FJ32MC102T-E/SO (28-soic-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für DSPIC33FJ32MC102T-E/SO.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
DSPIC33FJ32MC102T-E/SO ist geeignet für 6 Anwendungs: BLDC Motor Control, Switch-Mode Power Supplies, Automotive Body Electronics, Battery Chargers, Industrial Sensors and Instrumentation, Embedded Control and IoT Edge Nodes.
BLDC Motor Control
The DSPIC33FJ32MC102T-E/SO is purpose-built for brushless DC motor drives: its MCPWM peripheral generates complementary PWM pairs with hardware dead-time insertion, and the three on-chip analog comparators provide cycle-by-cycle overcurrent limiting and sensorless back-EMF zero-cross detection without external comparators. The 16 MIPS dsPIC33F core with hardware MAC instructions executes PID current loops and field-oriented control mathematics at the tens-of-kHz rates required by BLDC and PMSM machines. In a typical sensorless topology, comparator outputs feed directly into PWM fault or capture inputs, keeping the control loop deterministic. The AEC-Q100 E-grade rating extends use into automotive pump, fan, and actuator drives with -40C to +125C ambient exposure.
Empfohlen
Switch-Mode Power Supplies
Digital power supplies benefit from the MCPWM's high-resolution PWM outputs and fast analog comparators, which the DSPIC33FJ32MC102T-E/SO integrates in a compact 28-SOIC footprint. The 16 MIPS core closes voltage-mode or current-mode feedback loops in firmware, enabling adaptive compensation and soft-start profiles that are difficult with fixed analog controllers. The CTMU supports precision time-based sensing for auxiliary supervision functions, while PPS lets designers relocate PWM and feedback pins during board revisions without respinning copper. Running from a 3.0V to 3.6V rail, the controller interfaces cleanly with 3.3V logic and 5V-tolerant feedback nodes, suiting AC-DC adapters, digital ballasts, and telecom brick converters where firmware-updatable control laws add product value.
Empfohlen
Automotive Body Electronics
Thanks to AEC-Q100 qualification and the extended -40C to +125C E-grade temperature range, the DSPIC33FJ32MC102T-E/SO fits automotive auxiliary electronics such as HVAC damper actuators, window-lift helpers, pump controllers, and lighting ballasts. The LINbus and UART/USART with IrDA support cover common in-vehicle network nodes, while the RTCC maintains time-of-day scheduling for loads such as battery chargers. 5V-tolerant, pin-specific I/O eases interfacing with legacy 5V automotive sensors, and three external interrupts (two remappable via PPS) handle limit-switch and encoder feedback. The 32KB FLASH accommodates diagnostics, UDS-style firmware structures, and field-update bootloaders expected in modern automotive subsystems.
Empfohlen
Battery Chargers
The DSPIC33FJ32MC102T-E/SO implements multi-chemistry charging algorithms (CC/CV lithium, trickle/negative-delta-V nickel) in firmware using its MCPWM for converter control and ADC/comparator resources for current and voltage supervision. The integrated RTCC enables scheduled and safety-timer functions without an external RTC, and the CTMU can monitor cell temperature via resistive or capacitive sensing elements. Its 16 MIPS core sustains fast inner control loops while running battery-impedance estimation and fault logging simultaneously. Because the part is AEC-Q100 qualified with a 125C ceiling, it also serves on-board charger auxiliary stages in automotive and e-mobility platforms where ambient conditions exceed commercial grades.
Empfohlen
Industrial Sensors and Instrumentation
In industrial sensing nodes, the DSPIC33FJ32MC102T-E/SO combines DSP-grade math throughput with flexible connectivity: SPI and I2C ports attach precision ADCs and EEPROMs, while UART supports Modbus-RTU over RS-485 front ends. The CTMU provides charge-time measurement for capacitive and resistive sensing, useful for level, touch, and proximity front ends, and the three comparators implement threshold alarms in hardware with microsecond response independent of firmware latency. PPS remapping allows one PCB design to serve multiple sensor variants by relocating peripheral functions in firmware. The industrial-relevant -40C to +125C E-grade option and 32KB FLASH for calibration tables and compensation curves make it well suited to rugged transmitters.
Empfohlen
Embedded Control and IoT Edge Nodes
For compact embedded controllers and edge nodes, the DSPIC33FJ32MC102T-E/SO offers a 28-SOIC surface-mount footprint with 10-16 mA capable I/O that can drive small relays, optocouplers, and indicator LEDs directly. I2C and SPI buses connect sensors, displays, and external memory, while UART/IrDA links to short-range telemetry modules. Self-programmable 32KB FLASH supports field firmware updates over the serial link, an important lifecycle feature for deployed IoT hardware. The RTCC timestamps events for logging applications, and 5V-tolerant inputs simplify mixed-voltage integration with legacy peripherals, letting designers consolidate control, DSP filtering, and communication tasks into a single low-cost 16-bit DSC.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für DSPIC33FJ32MC102T-E/SO – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | DSPIC33FJ32MC102-E/SO | DSPIC33FJ32MC102T-I/SO | DSPIC33FJ32MC101T-I/SO | DSPIC33FJ12MC202T-E/SO |
|---|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same | 28-SOIC - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| FLASH Program Memory | 32KB (11K x 24) | 32KB (11K x 24) | 32KB (11K x 24) | 16KB | 12KB |
| Performance | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS | 16 MIPS |
| Operating Temperature | -40C to +125C (E) | -40C to +125C (E) | -40C to +85C (I) | -40C to +85C (I) | -40C to +125C (E) |
| AEC-Q100 Qualification | Qualified | Qualified | Not extended-grade (I) | Not extended-grade (I) | Qualified (E grade) |
| Motor Control Peripherals | MCPWM, 3 comparators, CTMU | MCPWM, 3 comparators, CTMU | MCPWM, 3 comparators, CTMU | MCPWM, 3 comparators, CTMU | MCPWM, comparators (reduced set) |
| Tape & Reel Packaging | Yes (T suffix) | No (tube/tray) | Yes (T suffix) | Yes (T suffix) | Yes (T suffix) |
Wichtigste Unterscheidungsmerkmale
- Extended -40C to +125C AEC-Q100 grade (vs. DSPIC33FJ32MC102T-I/SO)
- Double the program memory of the MC101 sibling (vs. DSPIC33FJ32MC101T-I/SO)
- Tape-and-reel production packaging (vs. DSPIC33FJ32MC102-E/SO)
Designhinweise
Power the DSPIC33FJ32MC102T-E/SO from a clean 3.0V to 3.6V rail; 3.3V nominal. Place a 0.1uF ceramic decoupling capacitor at each VDD pin pair with a 4.7uF to 10uF bulk capacitor nearby. Although some I/O pins are 5V-tolerant (pin-specific per the datasheet), do not pull non-tolerant pins above VDD. For motor-drive designs, separate the analog supply entry from PWM switching noise with an RC filter or ferrite to protect comparator and ADC accuracy.
Keep the MCLR programming trace short and route it away from MCPWM output traces to avoid spurious resets during In-Circuit Serial Programming. Reserve pads for a 100-ohm MCLR series resistor for ESD robustness. Because PPS allows peripheral relocation, plan your RPx pin assignments before layout to preserve future firmware flexibility; avoid swapping pins that carry comparator outputs destined for PWM fault inputs, where routing delay affects protection speed.
Two substitution pitfalls: (1) firmware written for the 32KB MC102 will not fit on MC101 (16KB) or 12MC202 (12KB) drop-ins - verify code size including bootloader headroom before dual-sourcing. (2) The -I temperature grade (+85C) parts must not replace -E (+125C) parts in hot environments, even though the silicon is identical; Microchip grades parts, not dies. Also note the oscillator configuration fuses determine startup source - verify FOSC settings when moving between family members.
When using the MCPWM outputs for gate driving, add small series resistors (10-33 ohm) at the controller pins to damp ringing into long gate-driver traces, and keep PWM return currents on a solid ground plane under the drive lines. Comparator inputs used for cycle-by-cycle current limiting should be routed as short paired traces with their current-shunt reference to minimize noise-induced false trips - the hardware comparator responds in nanoseconds, so layout noise translates directly into spurious PWM shutdowns.
Compliance-Informationen
AEC-Q100 qualification and extended temperature grade confirmed via Microchip USA product listing. RoHS/REACH/lead-free status not stated in provided data - verify on Microchip's official product page before release.
