EFM32TG225F8-BGA48 - 32MHz Cortex-M3 8KB MCU | Silicon Labs
Teilenummer: EFM32TG225F8-BGA48 ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
EFM32TG225F8-BGA48 Übersicht
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals into one device. In the EFM32 family hierarchy, this MCU combines an ARM Cortex-M3 processor with embedded Flash and SRAM, while configurable peripherals allow designers to route functions through a shared I/O matrix. This supports compact PCB designs and efficient peripheral sharing in embedded products.
The EFM32TG225F8-BGA48 features a single-core 32-bit architecture, 8 KB of Flash, 2 KB of RAM, AES capability, and three operational amplifiers according to the verified distributor data. The 32 MHz Cortex-M3 core provides substantially more processing capability than an 8-bit controller while retaining a simple embedded design. The 48-BGA package reduces board area compared with larger leaded packages but requires careful PCB layout and inspection.
Silicon Labs markets the Tiny Gecko platform around low-power operation, fast wake-up behavior, and energy-saving modes. Those characteristics suit battery-operated equipment and compact industrial products where average current consumption matters between active tasks. Exact sleep currents, wake-up timing, GPIO count, and analog performance must be confirmed in the manufacturer datasheet because those values were not included in the supplied verified excerpts.
Typical uses include compact sensor nodes, low-power instrumentation, connected maintenance equipment, energy-aware embedded controls, and portable products requiring an efficient 32-bit processor. Three operational amplifiers can support analog signal conditioning when their electrical limits and routing constraints match the application. AES capability can serve secure firmware, authenticated communication, or data-protection routines when used as part of a properly designed security architecture.
For PCB design, use a BGA-layout-qualified stackup and route all 48 package balls or pads to the required power, ground, signal, and programming interfaces. Provide clean supplies within 1.85 V to 3.8 V and follow the manufacturer’s decoupling and exposed-pad guidance. Because the complete pin map was not present in the verified data, this page does not infer individual pin functions.
This page consolidates verified distributor specifications, package details, sourcing links, comparison data, and practical integration guidance. It separates confirmed facts from unavailable parameters so engineers can make an evidence-based choice without assuming missing flash, memory, pinout, or compliance details.
Drop-in-Alternativen für EFM32TG225F8-BGA48 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
EFM32TG225F8-D-BGA48
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
EFM32TG225F8-BGA48 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | Tiny Gecko |
| CPU Core | ARM Cortex-M3 |
| Architecture | Single-core, 32-bit |
| Maximale Taktfrequenz | 32 MHz |
| Flash Memory | 8 KB |
| RAM | 2 KB |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Gehäuse | 48-BGA (4 x 4 mm) |
| Package Description | 48-VFBGA |
| Montageart | Surface mount |
| Security Capability | AES |
| Operational Amplifier Count | 3 |
| Peripheral Configuration | Configurable peripheral I/O locations |
| Power Features | Energy-saving modes and fast wake-up behavior |
EFM32TG225F8-BGA48 48-vfbga Pinbelegungsleitfaden
Pinbelegung für EFM32TG225F8-BGA48 (48-vfbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EFM32TG225F8-BGA48.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EFM32TG225F8-BGA48 ist geeignet für 7 Anwendungs: Compact Sensor Node, Portable Energy Meter, Industrial Condition Monitor, Low-Power Data Logger, Secure Embedded Controller, Connected Sensor Gateway, Precision Analog Control.
Compact Sensor Node
The EFM32TG225F8-BGA48 fits a compact sensor node that must process local measurements while keeping the board area small. Its verified 32 MHz ARM Cortex-M3 core provides 32-bit processing, while 8 KB of Flash and 2 KB of RAM constrain firmware and buffering plans. The 48-BGA (4 x 4 mm) package reduces footprint, and the 1.85 V to 3.8 V supply range supports low-voltage system rails. Designers should use low-power modes and confirm actual sleep and wake-up specifications in the complete manufacturer datasheet before calculating battery life.
Empfohlen
Portable Energy Meter
A portable energy meter can use the EFM32TG225F8-BGA48 for local signal processing, control, and secure data handling. The three verified operational amplifiers support analog signal-conditioning functions when their input, output, noise, and bandwidth specifications meet the measurement-chain requirements. AES capability may assist authenticated communications or protected firmware workflows, while the Tiny Gecko energy-saving architecture targets battery-sensitive operation. The 8 KB Flash and 2 KB RAM must be budgeted carefully, and power-consumption figures remain to be obtained from the complete datasheet.
Empfohlen
Industrial Condition Monitor
The EFM32TG225F8-BGA48 is suitable for compact industrial condition-monitoring modules that combine sensor acquisition, local filtering, and a communications interface. Its 32-bit Cortex-M3 core handles control tasks more efficiently than an 8-bit architecture, and the three operational amplifiers can reduce external analog-conditioning complexity when properly configured. The 1.85 V to 3.8 V operating range permits integration with low-voltage industrial systems. Qualification for harsh environments still requires verified temperature, ESD, EMC, and industrial-status information.
Empfohlen
Low-Power Data Logger
A low-power data logger benefits from the EFM32TG225F8-BGA48 when firmware can fit within its verified 8 KB of Flash and use its 2 KB of RAM. The 32-bit core can handle timestamps, filtering, storage management, and communications control, while Tiny Gecko energy-saving modes can reduce activity between samples. The 48-BGA package leaves board area for sensors, storage, and a radio, but it demands fine-pitch assembly capability. Developers should establish memory maps early and validate wake-up timing, analog accuracy, and average current in the finished system.
Empfohlen
Secure Embedded Controller
The EFM32TG225F8-BGA48 can serve as the embedded controller in a compact product that needs hardware-assisted AES capability. The 32 MHz ARM Cortex-M3 core can run control and communications routines, while the three operational amplifiers may support local analog interfaces. The small 48-BGA footprint is useful in security-sensitive accessories and connected maintenance equipment. AES availability does not make a product secure by itself: firmware update policy, key storage, random-number needs, debug access, boot validation, and peripheral configuration must be reviewed in the complete documentation.
Empfohlen
Connected Sensor Gateway
The EFM32TG225F8-BGA48 can act as a protocol gateway between local sensors and a communications processor when its 8 KB Flash and 2 KB RAM meet protocol-buffer requirements. Its configurable peripheral I/O locations are useful when several functions need access to limited package balls, and the three operational amplifiers can assist low-level signal conditioning. The 32 MHz core provides responsive packet handling and control. Before implementation, verify the exact GPIO count, peripheral routing matrix, serial interfaces, and pin assignments because those details were not present in the supplied excerpts.
Empfohlen
Precision Analog Control
The EFM32TG225F8-BGA48 is a candidate for compact analog-control systems because the verified feature set includes three operational amplifiers alongside the ARM Cortex-M3 core. Place the MCU near suitable sensor-conditioning paths to reduce analog trace length, then use its digital control and communications functions to supervise the system. The 1.85 V to 3.8 V operating range supports low-voltage designs. Gain-bandwidth, input common-mode range, output swing, noise, stability, and ADC limits must be verified before assigning the amplifiers to a precision signal path.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EFM32TG225F8-BGA48 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EFM32TG225F8-D-BGA48 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 48-BGA (4 x 4 mm) | 48-BGA; exact dimensions require final datasheet confirmation |
Wichtigste Unterscheidungsmerkmale
- Three integrated operational amplifiers (vs. EFM32TG225F8-D-BGA48)
- Compact 48-BGA integration (vs. EFM32TG225F8-D-BGA48)
- Low-voltage operation with established core resources (vs. EFM32TG225F8-D-BGA48)
Designhinweise
Treat the 48-BGA as a fine-pitch assembly constraint rather than a simple two-row footprint. The verified excerpts do not provide the ball map, escape-routing pattern, or exposed-pad connection, so use the complete manufacturer land pattern before placing decoupling, test points, or programming headers. Coordinate via-in-pad or via-beneath-array construction with the assembler because BGA solder-joint inspection and rework depend on the selected assembly process.
Keep all supply rails inside the verified 1.85 V to 3.8 V range and design decoupling around the manufacturer’s complete pin and electrical requirements. The verified material confirms low-energy techniques but does not provide active, idle, or sleep current values. Therefore, do not estimate battery life from processor frequency alone. Measure current across wake, processing, analog, and sleep states after final firmware, clock, peripheral, and regulator selections are fixed.
The 8 KB Flash and 2 KB RAM are modest resources for an ARM Cortex-M3 design. Allocate stack, global data, communication buffers, and analog-processing storage before committing to application architecture, and avoid assuming an external-memory interface exists. Likewise, confirm that three operational amplifiers meet the required gain, bandwidth, common-mode range, output swing, noise, and stability. The verified distributor summaries establish their count but not their electrical limits.
Configure clock, communications, and sensitive analog routes only after verifying the final pin mapping and peripheral routing in the full datasheet. The supplied material mentions configurable peripheral I/O locations, making pin-multiplexing review essential. Keep switching traces away from analog inputs, use a continuous ground reference, follow the package’s thermal and decoupling recommendations, and validate BGA assembly with X-ray or equivalent process inspection before production.
Compliance-Informationen
The supplied verified snippets do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.
