EFM32TG230F32-D-QFN64 - 32MHz Cortex-M3 MCU | Silicon Labs
Teilenummer: EFM32TG230F32-D-QFN64 ✓ AktivEFM32TG230F32-D-QFN64 Übersicht
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32TG230F32 belongs to the Tiny Gecko family of 32-bit embedded MCUs and sits within the broader hierarchy of ARM Cortex-M3 MCU, microcontroller, integrated circuit, and semiconductor. This integration reduces component count in compact products while giving designers access to programmable control, serial communications, timers, analog functions, and low-power management.
The EFM32TG230F32-D-QFN64 provides 32 kB of Flash and 4 kB of RAM, supporting firmware and working-memory requirements typical of compact sensor nodes, industrial controls, consumer accessories, and portable instruments. Its two 16-bit timers support periodic timing and event handling, while 56 digital I/O pins provide connections for sensors, switches, indicators, and external interface circuits. The 32 MHz Cortex-M3 core offers substantially more processing headroom than an 8-bit architecture for protocol management and real-time control.
The Tiny Gecko platform is centered on energy-efficient operation rather than maximum performance. Fast wake-up behavior allows a system to remain in a low-energy state and resume useful computation without excessive startup delay. This architecture is particularly valuable in battery-operated equipment where average current, not only active-state performance, determines operating life. Designers should still calculate duty-cycle-dependent averages and verify regulator losses across the full input-voltage range.
Typical uses include Bluetooth and Zigbee accessory nodes, building-control endpoints, industrial sensor modules, compact instrumentation, remote controls, and low-power consumer products. For each implementation, confirm pin multiplexing, peripheral availability, clock configuration, and package exposure-pad requirements against the manufacturer datasheet. The 9 x 9 mm QFN format supports compact layouts but requires careful thermal-pad assembly and controlled PCB design.
A critical layout consideration is the exposed pad beneath the QFN package. Use the manufacturer land pattern, connect the pad to the appropriate supply or ground plane, and follow its assembly requirements for solder and inspection. Decoupling capacitors should be placed close to their associated supply pins, with the smallest effective capacitance nearest the device.
This product page consolidates the exact orderable MPN, manufacturer specifications, sourcing information, drop-in considerations, and practical PCB guidance. It also distinguishes a true same-footprint replacement from ordinary functional alternatives, helping engineers avoid changes that require software, firmware, or board-layout redesign.
Drop-in-Alternativen für EFM32TG230F32-D-QFN64 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EFM32TG230F32-D-QFN64 (gleiche Bauform und Footprint) – abweichend in Architecture, Digital I/O Pins, Flash Memory, Package, Processor Core.
EFM32TG230F32-QFN64
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →EFM32TG230F32-D-QFN64 Grenzwerte & elektrische Eigenschaften
| Processor Core | ARM Cortex-M3, 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 56 |
| Timer Count | 2 x 16-bit |
| Supply Voltage Range | 1.85 V to 3.8 V |
| Gehäuse | 64-QFN, 9 x 9 mm |
| Montageart | Surface Mount |
| Architecture | Tiny Gecko low-power MCU architecture |
| Low-Energy Modes | Supported |
| Fast Wake-Up | Supported |
| Core Bit Width | 32 bit |
| Program Memory Type | Flash |
EFM32TG230F32-D-QFN64 64-qfn, 9 x 9 mm Pinbelegungsleitfaden
Pinbelegung für EFM32TG230F32-D-QFN64 (64-qfn, 9 x 9 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EFM32TG230F32-D-QFN64.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EFM32TG230F32-D-QFN64 ist geeignet für 6 Anwendungs: Battery-Powered Sensor Nodes, Building-Control Endpoints, Industrial Sensor Interfaces, Compact Remote Controls, Low-Power Consumer Accessories, Low-Power Test and Measurement.
Battery-Powered Sensor Nodes
The EFM32TG230F32-D-QFN64 fits compact sensor nodes that periodically measure a physical variable, process the result, and return to a low-energy state. Its Tiny Gecko architecture provides energy-saving modes and fast wake-up behavior, while the 32 MHz ARM Cortex-M3 core handles acquisition logic, filtering, and communications management. The 32 kB Flash accommodates application firmware, and 4 kB RAM supports short-term working data. A 56-I/O device also allows digital sensors, status indicators, and local inputs to share the same controller. The principal design trade-off is that average battery current depends on wake frequency and active duration, so the firmware schedule should minimize unnecessary processing.
Empfohlen
Building-Control Endpoints
The EFM32TG230F32-D-QFN64 is appropriate for building-control endpoints that monitor occupancy, environmental conditions, or connected equipment through a compact controller board. Its 56 digital I/O pins can support switches, alarm inputs, relay status signals, and local indicators, while two 16-bit timers can handle periodic sampling and output timing. The 32 MHz Cortex-M3 core provides sufficient throughput for communication stacks and supervisory logic without moving to a higher-power processor. In this application, the 1.85 V to 3.8 V operating range must be reconciled with the power architecture, and low-energy modes can reduce standby consumption between building events.
Empfohlen
Industrial Sensor Interfaces
The EFM32TG230F32-D-QFN64 can serve as the local interface controller for industrial sensors that combine digital inputs, timers, and a serial communications link. Its two 16-bit timers support periodic sampling, timeout management, and pulse-width measurement, while the 56 digital I/O pins allow one controller to interface with several discrete channels. The 32 kB Flash and 4 kB RAM balance embedded firmware complexity against package size and system cost. For industrial deployment, engineers should verify operating-temperature limits, electrical-noise tolerance, isolation strategy, and external interface levels in addition to the MCU’s core specifications.
Empfohlen
Compact Remote Controls
The EFM32TG230F32-D-QFN64 suits compact remote-control designs requiring reliable button handling, status indication, and low standby consumption. The ARM Cortex-M3 core can execute debounce logic, command encoding, and communication-control tasks at speeds up to 32 MHz, while 56 digital I/O pins leave substantial capacity for buttons, LEDs, and interface signals. Fast wake-up behavior supports responsive operation after long idle periods, and the Tiny Gecko energy-saving modes are valuable in battery-powered handsets. Designers should select the peripheral configuration that matches the control protocol and test all wake sources because accidental sleep or debug-interface behavior can affect user experience.
Empfohlen
Low-Power Consumer Accessories
The EFM32TG230F32-D-QFN64 is appropriate for energy-conscious consumer accessories that combine local control, compact dimensions, and simple user interfaces. The 9 x 9 mm 64-QFN package accommodates 56 digital I/O pins without moving to a larger leaded package, and the 32 MHz Cortex-M3 core can manage product logic alongside serial accessories. Its low-energy platform allows the product to spend substantial time inactive while retaining fast response when required. The main engineering considerations are exposed-pad assembly, careful decoupling, and a power budget that includes the MCU, radio or sensor subsystem, regulator losses, and indicator current.
Empfohlen
Low-Power Test and Measurement
The EFM32TG230F32-D-QFN64 can be used in compact test and measurement equipment where the controller must sequence peripherals, capture digital events, and communicate results through a limited connector set. Two 16-bit timers provide predictable timing resources, while 56 digital I/O pins support triggers, interlocks, status LEDs, and control signals. Its 32 MHz processing rate allows the firmware to combine measurement control with calibration tables and a communications protocol. For accurate analog measurement, use dedicated external converters or analog front ends where required; the MCU’s digital timers and I/O are best used for sequencing, threshold supervision, and system control.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EFM32TG230F32-D-QFN64 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EFM32TG230F32-QFN64 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) |
| Processor Core | ARM Cortex-M3, 32-bit | ARM Cortex-M3, 32-bit |
| Maximum CPU Frequency | 32 MHz | 32 MHz |
| Flash Memory | 32 kB | 32 kB |
| RAM | 4 kB | 4 kB |
| Digital I/O Pins | 56 | 56 |
| Timer Configuration | 2 x 16-bit | 2 x 16-bit |
| Supply Voltage Range | 1.85 V to 3.8 V | 1.85 V to 3.8 V |
| Architecture | Tiny Gecko low-power MCU architecture | Tiny Gecko low-power MCU architecture |
Wichtigste Unterscheidungsmerkmale
- Identical silicon configuration in the closest orderable variant (vs. EFM32TG230F32-QFN64)
- Compact 64-pin surface-mount implementation (vs. EFM32TG230F32-QFN64)
- Low-energy architecture for duty-cycled products (vs. EFM32TG230F32-QFN64)
Designhinweise
Use the manufacturer’s 64-QFN land pattern exactly, including the exposed-pad geometry and thermal-via arrangement. Place the smallest effective input and output capacitors nearest their associated supply pins, then place bulk capacitance slightly farther away. Keep the exposed-pad connection, power-plane current path, and ground return continuous under the device. Do not route sensitive signals beneath the package where switching or high-current paths could increase coupling.
Design the power tree for the full 1.85 V to 3.8 V operating range. Confirm that the selected regulator remains stable with the input and output capacitors specified for this device, and calculate MCU current in both active and low-energy states. Battery-powered designs should include radio, sensor, regulator-efficiency, and wake-frequency loads in the average-current budget rather than using active current alone.
Do not treat the -D and base QFN64 orderable designations as different functional devices without checking the manufacturer’s ordering information. Likewise, do not assume that another EFM32 model is pin-compatible merely because it uses a QFN package. Confirm the exact device code, memory density, GPIO count, exposed-pad connection, peripheral set, startup file, and temperature requirements. A mechanically similar package does not guarantee a usable drop-in replacement.
Although the 9 x 9 mm QFN package is compact, thermal performance depends on the PCB copper area, thermal vias, surrounding airflow, and exposed-pad assembly. Validate the hottest expected operating condition using the manufacturer’s electrical and thermal data. Keep nearby heat sources separated where practical, maintain uninterrupted copper under the exposed pad, and specify an assembly process capable of achieving the required solder-joint inspection quality.
Compliance-Informationen
Compliance status must be confirmed using the current manufacturer product page, product declaration, or lot-specific documentation for the exact orderable MPN.