EP2C20AF484I8N - 18,752-LUT Cyclone II FPGA | Intel
Teilenummer: EP2C20AF484I8N ✓ AktivEP2C20AF484I8N Übersicht
A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. An FPGA belongs to the programmable-logic hierarchy: FPGA -> programmable logic device -> digital semiconductor. Compared with a fixed-function application-specific integrated circuit, an FPGA permits hardware behavior to be revised through configuration files, shortening development cycles and supporting parallel processing, state machines, protocol handling, and custom peripheral functions.
The Cyclone II architecture provides 18,752 logic elements and 239,616 RAM bits for data storage and logic implementation. Its 315 I/O pins offer substantial connectivity for external memories, control signals, and high-speed interfaces. The device is identified as operating with a 1.2 V core and reaching 402.58 MHz, making it suitable for parallel datapaths and moderately clocked embedded systems requiring substantially more parallelism than a general-purpose microcontroller.
The EP2C20AF484I8N is offered in a 484-pin fine-pitch ball grid array package with surface-mount construction. The package supports compact PCB integration, but its high pin count and fine pitch require careful escape-routing, multilayer layout, and assembly planning. Configuration storage, programming hardware, clocking, decoupling, and I/O standards remain central implementation considerations.
Typical uses include industrial control, embedded communications, data acquisition, protocol conversion, and embedded processing. In each case, the device can implement multiple finite-state machines, parallel algorithms, or custom interface logic in one FPGA. A clocking and power design should support the 1.2 V core requirement, while board-level signal integrity must accommodate the dense 484-pin FBGA footprint.
For a new design, verify the required I/O standards, supported memory interfaces, configuration scheme, clock tolerance, and operating-temperature grade before layout release. Reuse of an existing PCB should also include a complete pin, voltage, timing, and configuration compatibility review rather than package matching alone.
This product summary combines the key Cyclone II resource figures, package information, drop-in family alternatives, application guidance, and PCB design considerations to support faster component selection and engineering review.
Drop-in-Alternativen für EP2C20AF484I8N – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit EP2C20AF484I8N (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, Process Technology, Configuration Modes, Core Voltage.
EP2C20F484I8N
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →EP2C20F484C6N
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →EP2C20AF484C6N
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EP2C20AF484C7N
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EP2C20AF484C8N
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
EP2C20AF484I8N Grenzwerte & elektrische Eigenschaften
| Device Type | Cyclone II field-programmable gate array |
| Logic Elements | 18,752 |
| Embedded RAM | 239,616 bits |
| User I/O | 315 |
| Maximale Taktfrequenz | 402.58 MHz |
| Core Supply Voltage | 1.2 V |
| Gehäuse | 484-pin FBGA |
| Montageart | Surface mount |
| FPGA Family | Cyclone II |
| Programmable Logic Type | SRAM-based configurable logic |
EP2C20AF484I8N 484-pin fbga Pinbelegungsleitfaden
Pinbelegung für EP2C20AF484I8N (484-pin fbga-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für EP2C20AF484I8N.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
EP2C20AF484I8N ist geeignet für 6 Anwendungs: Industrial Control and Automation, Embedded Communications Gateway, Data Acquisition and Signal Processing, Protocol Conversion and Bridging, Video and Imaging Pipeline, Embedded Processor System.
Industrial Control and Automation
The EP2C20AF484I8N fits industrial control logic that benefits from parallel hardware execution. Its 18,752 logic elements can implement multiple state machines, timing controllers, interlocks, and signal-processing paths simultaneously, while 315 I/O provide substantial connectivity to sensors, actuators, counters, and human-machine interfaces. The 402.58 MHz maximum clock supports demanding control pipelines, and the 1.2 V core simplifies partition of digital and I/O power rails. A practical design should isolate noisy actuator drive, use deterministic clocking, and route high-current returns away from sensitive FPGA inputs. Before release, confirm the operating-temperature grade, supported I/O standards, and industrial qualification requirements.
Empfohlen
Embedded Communications Gateway
The Cyclone II EP2C20AF484I8N is useful in communications gateways that must terminate or translate multiple serial streams while executing protocol logic in parallel. The 315 user I/O can accommodate digital interfaces, control signals, status indicators, and memory connections, while 239,616 RAM bits support packet buffering and descriptor management. Its 18,752 logic elements allow protocol state machines and data-path functions to operate concurrently rather than being serialized in software. The 1.2 V core should be generated by a low-noise supply, and clock inputs should use jitter-conscious routing. Board-level considerations include I/O standard compatibility, termination, isolation, and separation between communications circuitry and sensitive digital logic.
Empfohlen
Data Acquisition and Signal Processing
The EP2C20AF484I8N can implement parallel acquisition pipelines, digital filters, counters, correlation functions, and custom data-format converters in programmable logic. Its 18,752 logic elements provide substantially more parallel capacity than a compact microcontroller, and the 239,616 RAM bits can buffer samples or hold lookup and calibration data. A maximum clock of 402.58 MHz allows the design to balance sampling throughput against routing and timing constraints. Designers should define acquisition latency in clock cycles, register the first data stage, and constrain timing-sensitive paths. Analog front-end isolation is outside the FPGA, but grounding, reference planes, and digital return paths must prevent converter noise from entering the processing fabric.
Empfohlen
Protocol Conversion and Bridging
The EP2C20AF484I8N is suited to legacy protocol conversion because independent state machines can bridge interfaces with mismatched clock rates and data formats. Available resources include 18,752 logic elements, 239,616 RAM bits, and 315 I/O, allowing FIFO structures, framing logic, and status registers to coexist on one device. The 1.2 V core supports modern dense FPGA implementations, while the 402.58 MHz device ceiling provides timing margin for synchronous conversion stages. The implementation should use separate clock domains with constrained crossings, dual-clock FIFOs, and synchronizers for asynchronous inputs. Signal standards and directional requirements must be assigned through the project constraints rather than assumed from package position.
Empfohlen
Video and Imaging Pipeline
The EP2C20AF484I8N can implement image acquisition formatting, color processing, pixel packing, and interface timing in parallel logic. Its 315 I/O provide extensive connectivity to image sensors, memory devices, and display controllers, while 239,616 RAM bits support line buffers and short pipeline stages. The 402.58 MHz maximum clock enables parallel pixel operations when the selected memory interface and routing allow the required throughput. Video designs should account for frame timing, blanking intervals, and clock-domain crossings, and should avoid using general logic for timing-critical paths that could be handled by dedicated resources. The exact I/O voltage and supported interface standards require verification against the device documentation.
Empfohlen
Embedded Processor System
The EP2C20AF484I8N can host a soft processor together with peripherals, memory interfaces, interrupts, and application-specific accelerators. The 18,752 logic elements allow the processor logic to coexist with dedicated hardware pipelines, while 239,616 RAM bits provide on-chip storage for code, data, or buffers. The 315 I/O supports external memories and control peripherals without requiring a separate programmable-logic device for every interface. Designers should partition the soft core and accelerator logic, use a dedicated clock for the processor when appropriate, and reserve memory bandwidth for deterministic real-time behavior. Configuration retention, boot flow, watchdog behavior, and debug access should be planned at the system level before PCB routing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für EP2C20AF484I8N – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | EP2C20F484I8N | EP2C20F484C6N | EP2C20AF484C6N |
|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel |
| Package | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA | 484-pin FBGA |
| FPGA Family | Cyclone II | Cyclone II | Cyclone II | Cyclone II |
| Logic Elements | 18,752 | 18,752 | 18,752 | 18,752 |
| Embedded RAM | 239,616 bits | 239,616 bits | 239,616 bits | 239,616 bits |
| User I/O | 315 | 315 | 315 | 315 |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Ordering Speed Code | 8 | 8 | 6 | 6 |
| Surface Mount | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Closest identified same-package alternative (vs. EP2C20F484I8N)
- Additional same-package speed-grade choice (vs. EP2C20F484C6N)
- Large parallel logic resource set (vs. EP2C20F484C6N)
Designhinweise
Design the 484-pin FBGA footprint from the manufacturer package drawing rather than inferring it from a generic BGA library. Reserve short, symmetrical escape paths on the top layer and use buried or through vias where the package pitch requires layer changes. Place decoupling capacitors close to the 1.2 V core and I/O supply balls, preserve a continuous return plane, and follow the manufacturer's ball-assignment and via-in-pad guidance.
Create separate, well-filtered supply paths for the 1.2 V FPGA core and any external I/O voltage domains. Validate steady-state and transient current at the actual clock and utilization target rather than relying only on the maximum clock frequency. Use local bulk and high-frequency decoupling, minimize loop area, and keep switching-regulator and converter return currents out of the sensitive core reference area.
Treat clock inputs, high-speed I/O, and configuration signals as routed interfaces with defined impedance and return paths. Use the manufacturer I/O standards to determine whether series termination is required, avoid stubs, and provide solid reference planes beneath every high-speed route. Configuration and JTAG access should be brought to accessible test points for production programming and boundary-scan diagnostics.
Do not treat a matching FBGA package as sufficient evidence of interchangeability. Before substituting a same-family device, compare the complete ordering suffix, speed grade, temperature grade, core and I/O voltages, configuration method, supported memory interfaces, and documented pin functions. Also verify that the 315 I/O can support the intended voltage standards and that the PCB footprint matches the manufacturer's land pattern.
FPGA junction temperature depends on logic utilization, switching activity, I/O loading, supply voltage, board construction, and airflow. Estimate worst-case junction temperature using the manufacturer power methodology and the actual PCB thermal resistance, then verify it in hardware with a representative configuration. Avoid using a 402.58 MHz clock as a thermal design assumption; operating frequency and switching activity may differ substantially from the maximum condition.
Compliance-Informationen
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status were not stated in the cited component records and require confirmation from the manufacturer or the relevant declaration.