HUS723030ALS640 - 3TB 7.2K SAS 6Gb/s Enterprise HDD | HGST Ultrastar 7K3000
Teilenummer: HUS723030ALS640 ⚠ Letzte Bestellmöglichkeit| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $47.04 | $47,04 |
| 10 | $44.95 | $449,50 |
| 50 | $42.5 | $2.125,00 |
| 100 | $39.99 | $3.999,00 |
| 500 | $36.5 | $18.250,00 |
HUS723030ALS640 Übersicht
A 3.5-inch enterprise HDD is a rotational magnetic storage device built around stacked aluminum platters, a high-speed spindle motor, and a multi-head actuator that delivers sequential and random access on a SATA or SAS transport. Within the broader storage taxonomy, the HUS723030ALS640 sits in the capacity-optimized segment of enterprise HDDs, below 10K/15K RPM performance HDDs and well below SSDs on the IOPS axis, but ahead of nearline-SATA drives on the interface reliability and dual-port fault-tolerance axis because SAS supports full-duplex dual-port operation. It is the workhorse building block of the Ultrastar 7K3000 family, and the suffix "A L S 6 4" decodes as Ultrastar-generation / large-form-factor / 512n sector / SAS 6 Gb/s / 64 MB cache.
Key specifications include sustained sequential read throughput of approximately 184 MB/s, sustained sequential write of roughly 200 MB/s, an average seek time near 8.2 ms, dual-port SAS connectivity, and a 2.0 million hour MTBF rating backed by a 5-year limited warranty. The drive also provides Rotational Vibration (RV) sensor technology for use in dense multi-drive chassis, Power Choice power management to reduce idle watts, and TLER / ERC (time-limited error recovery) to behave predictably inside RAID rebuilds.
Architecturally, the HUS723030ALS640 uses a 6 Gb/s SAS PHY with an 8B/10B encoded serial transport, a 64 MB DRAM read/write cache, and on-the-fly ECC across the recording channel. Its 5-platter, 10-head mechanical design delivers the 3 TB raw capacity, while its rotational speed and cache tuning target sequential workloads over random-IO micro-transactions.
Typical applications include enterprise backup targets, secondary storage tiers in software-defined storage, cold-data archival within hyperscale datacenters, surveillance/NVR bulk storage with sustained write streams, and capacity-tier nodes in scale-out object storage clusters. The 3 TB capacity point is also widely deployed as a Dell PowerEdge / Compellent FRU and as an Oracle / Sun / Cisco spare.
When designing systems around this drive, ensure the HBA or RAID controller supports 512n sector emulation (older controllers may default to 512e-only mode). Validate TLER behaviour matches the rest of the array to avoid spurious RAID dropouts, and provision airflow of at least 5 CFM per drive in dense enclosures to keep the ambient below 35 degrees Celsius.
This page synthesizes distributor pricing, sibling variant listings, pinout and interface notes, and practical design considerations not found in the manufacturer datasheet alone, giving procurement and datacenter engineers an at-a-glance decision resource.
Drop-in-Alternativen für HUS723030ALS640 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit HUS723030ALS640 (gleiche Bauform und Footprint) – abweichend in Capacity, Form Factor, Interface, MTBF, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
HUS724040ALS640
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
HUS723020ALS640
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
HUS726060ALS640
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
ST3000NX0463
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ST2000NX0273
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
WD3001BKHG
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
HUS723030ALS640 Grenzwerte & elektrische Eigenschaften
| Manufacturer | HGST (Hitachi Global Storage Technologies) |
| Product Family | Ultrastar 7K3000 |
| Capacity | 3 TB (3000 GB) |
| Form Factor | 3.5-inch (LFF) |
| Spindle Speed | 7200 RPM |
| Schnittstelle | SAS 6 Gb/s (dual-port capable) |
| Sector Format | 512n (native) |
| Cache Buffer | 64 MB |
| MTBF | 2,000,000 hours |
| Annualized Failure Rate (AFR) | 0.44% |
| Workload Rating | Enterprise 24x7 |
| Rotational Vibration Sensor | Yes (RV feed-forward) |
| Power Choice Idle Mode | Yes |
| TLER / ERC | Yes (time-limited error recovery) |
| Betriebstemperatur | 5C to 60C (ambient) |
| Connector | 29-pin SAS SFF-8482 (data+power combo) |
| Sector Size (logical) | 512 bytes |
| Sector Size (physical) | 4K (with 512n emulation) |
| Warranty | 5 years limited (per reseller terms) |
| RoHS-Status | Compliant |
| Dell FRU Equivalent | HUS723030ALS640-CL (Compellent) |
HUS723030ALS640 Pin-Konfiguration
| Pin P1 | GND — Ground return for logic and power |
| Pin P2 | TX+ (Port A) — SAS transmit positive, dual-port capable |
| Pin P3 | TX- (Port A) — SAS transmit negative, dual-port capable |
| Pin P4 | GND — Ground reference |
| Pin P5 | RX- (Port A) — SAS receive negative, dual-port capable |
| Pin P6 | RX+ (Port A) — SAS receive positive, dual-port capable |
| Pin P7 | GND — Ground reference |
| Pin P8 | SGND — Signal ground reference |
| Pin P9 | ACTIVITY LED - — Drive activity LED cathode (drive side) |
| Pin P10 | ACTIVITY LED + — Drive activity LED anode (drive side) |
| Pin P11 | GND — Ground reference |
| Pin P12 | Reserved — Per SFF-8482 / 8454 reserved pin, no connection required |
| Pin P13 | +12V Pre-charge — Hot-plug pre-charge capacitor supply |
| Pin P14 | +12V — 12 V power supply input |
| Pin P15 | +12V — 12 V power supply input (second pin) |
| Pin P16 | +12V — 12 V power supply input (third pin) |
| Pin P17 | +12V — 12 V power supply input (fourth pin) |
| Pin P18 | +5V — 5 V power supply input |
| Pin P19 | +5V — 5 V power supply input (second pin) |
| Pin P20 | +5V — 5 V power supply input (third pin) |
| Pin P21 | +5V — 5 V power supply input (fourth pin) |
| Pin P22 | READY LED - — Drive ready LED cathode (drive side) |
| Pin P23 | READY LED + — Drive ready LED anode (drive side) |
| Pin P24 | GND — Ground reference |
| Pin P25 | TX+ (Port B) — SAS transmit positive, secondary port B |
| Pin P26 | TX- (Port B) — SAS transmit negative, secondary port B |
| Pin P27 | GND — Ground reference |
| Pin P28 | RX- (Port B) — SAS receive negative, secondary port B |
| Pin P29 | RX+ (Port B) — SAS receive positive, secondary port B |
Typische Anwendungen
HUS723030ALS640 ist geeignet für 6 Anwendungs: Enterprise RAID-6 Capacity Tier, Dell Compellent / PowerEdge Spare, Surveillance / NVR Bulk Storage, Cold Data Archival in Object Storage, Secondary Backup Target, Software-Defined Storage Capacity Node.
Enterprise RAID-6 Capacity Tier
The HGST HUS723030ALS640 anchors RAID-6 or RAID-10 capacity tiers in mid-range enterprise arrays where bulk storage cost per TB matters more than raw IOPS. Its 512n sector format, 64 MB cache, and 7,200 RPM spindle tolerate sustained sequential reads at up to ~184 MB/s and writes at ~200 MB/s, which matches nightly backup windows, software-defined storage pools, and replicated warm-data tiers. The TLER (Time-Limited Error Recovery) default of 7 seconds keeps a degraded array from cascading into multiple spurious drive drops during parity rebuilds, a real failure mode in production RAID-6 rebuilds. Each drive delivers 2.0 million hour MTBF and 0.44 percent AFR per HGST datasheet, supporting 24x7 operation without overheating the warranty budget of the array. Recommended companions: a SAS HBA or RAID controller with TLER matching, plus the chassis backplane wiring of the same drive family. Drop-in alternatives from the same family extend density without firmware changes.
Empfohlen
Dell Compellent / PowerEdge Spare
The HUS723030ALS640-CL variant ships as a Dell-branded spare for Compellent SC-series and selected PowerEdge servers, and procurement teams routinely replace failed drives with this exact part. The drive carries Dell firmware, Dell warranty terms, and Dell kit tags, but the mechanics, MTBF, and 7200 RPM platform are identical to the standard HGST Ultrastar 7K3000. Using it as a hot spare preserves the array's TLER profile and prevents the firmware-mismatch alerts that sometimes occur when mixing OEM drives with non-OEM spares. Procurement teams should match part numbers exactly (HUS723030ALS640-CL for Compellent, the bare HUS723030ALS640 for Dell-branded PowerEdge) to keep management software happy.
Empfohlen
Surveillance / NVR Bulk Storage
The HUS723030ALS640 works well in mid-size Network Video Recorder (NVR) deployments where 3 TB per drive and 7200 RPM bring enough throughput for 30+ concurrent 1080p camera streams at moderate bitrates. Surveillance workloads are bursty sequential writes during motion, and the 64 MB cache plus write-back firmware absorb these bursts without frame drops. The drive's RV sensor keeps it stable in multi-drive chassis (typical 16- or 24-bay NVR enclosures), and the 0.44 percent AFR is acceptable when RAID-6 or RAID-50 protects the array. Per the HGST datasheet, ambient operating temperature should remain below 60 degrees Celsius, so dense NVR chassis benefit from a 5 CFM per drive airflow specification.
Empfohlen
Cold Data Archival in Object Storage
The HUS723030ALS640 is a reasonable node drive for cold-data tiers in object storage platforms like OpenStack Swift, Ceph cold pools, or S3-compatible cold-tier gateways. At USD 15.68 per TB (used market, 2026-10-14) it competes favorably with nearline SATA drives when SAS-grade reliability is desired. Object storage workloads are dominated by sequential reads and large append-only writes, exactly the pattern the 7K3000's 200 MB/s sustained write and TLER behaviour prefer. Pair the drives in 12+1 or 24+2 erasure-coding pools to absorb up to two simultaneous drive failures without data loss while still hitting capacity-density targets in dense Rackscale configurations.
Empfohlen
Secondary Backup Target
Small and mid-size enterprise backup targets running Veeam, Commvault, or NetBackup benefit from the HUS723030ALS640's combination of 3 TB capacity, 7200 RPM performance, and 2.0 million hour MTBF. Backup windows are dominated by sequential write streams rather than random IO, and the 7K3000's 64 MB write-back cache helps large-block writes flush efficiently between tape-like job cycles. The TLER setting keeps the drive in lockstep with mixed-brand peers inside a virtualized backup target, avoiding the spurious dropouts that consumer drives cause during nightly de-duplication passes.
Empfohlen
Software-Defined Storage Capacity Node
The HUS723030ALS640 fits the capacity node role in software-defined storage (SDS) platforms such as vSAN capacity tier, Storage Spaces Direct, or SUSE Enterprise Storage, where 3 TB per drive at 7200 RPM keeps capital expenditure low while SAS 6 Gb/s dual-port provides the multipath enterprise connectivity these platforms recommend. At 0.44 percent AFR the drive meets the typical 24x7 SLA for nearline workloads and tolerates SDS erasure coding windows of 12+2 without inflating rebuild times. The 5-platter design has been validated across multiple SDS reference architectures, and the 512n sector size simplifies mixed deployments with legacy operating systems.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für HUS723030ALS640 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | HUS724040ALS640 | HUS723020ALS640 | HUS726060ALS640 | ST3000NX0463 | ST2000NX0273 | WD3001BKHG |
|---|---|---|---|---|---|---|---|
| Brand | HGST (Western Digital) | HGST (Western Digital) | HGST (Western Digital) | HGST (Western Digital) | Seagate | Seagate | Western Digital |
| Package / Form Factor | 3.5" LFF (SFF-8482 SAS) | 3.5" LFF (SFF-8482 SAS) - same | 3.5" LFF (SFF-8482 SAS) - same | 3.5" LFF (SFF-8482 SAS) - same | 3.5" LFF (SFF-8482 SAS) - same | 3.5" LFF (SFF-8482 SAS) - same | 3.5" LFF (SFF-8482 SAS) - same |
| Capacity | 3 TB | 4 TB | 2 TB | 6 TB | 3 TB | 2 TB | 3 TB |
| Spindle Speed | 7200 RPM | 7200 RPM | 7200 RPM | 7200 RPM | 7200 RPM | 7200 RPM | 7200 RPM |
| Interface | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) | SAS 6 Gb/s (dual-port) |
| Cache Buffer | 64 MB | 64 MB | 64 MB | 64 MB | 128 MB | 128 MB | 32 MB |
| MTBF (hours) | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 | 2,000,000 | 1,400,000 |
| Sector Format | 512n | 512n | 512n | 512n | 512n | 512n/512e | 512n |
Wichtigste Unterscheidungsmerkmale
- Industry-leading 2.0 million hour MTBF for a 7200 RPM 3 TB drive (vs. WD3001BKHG)
- 512n sector format for legacy controller compatibility (vs. ST2000NX0273 (512n/512e))
- Dual-port SAS 6 Gb/s with TLER for enterprise RAID (vs. ST3000NX0463)
Designhinweise
The HUS723030ALS640 ships with TLER (Time-Limited Error Recovery) enabled by default to a 7-second window. Verify the same TLER setting is active on every drive in a mixed-vendor RAID array; a single consumer-grade drive that lacks TLER (and therefore retries indefinitely on a bad sector) will cause the entire RAID set to mark the drive as failed mid-rebuild. Per HGST's datasheet, TLER must match across the array for predictable rebuild behaviour.
Specified for 5C to 60C ambient operation. In dense 16- or 24-bay enclosures, airflow of at least 5 CFM per drive bay is recommended to keep the ambient below 50C. Estimation: a fully populated chassis with 12 BTU/hour per drive (idling at 8W each) plus two PSUs can easily push ambient over the 60C limit if passive airflow is the only path. Active cooling with redundant fans is strongly recommended for RAID arrays at full population.
The HUS723030ALS640 uses the SFF-8482 SAS connector on a single PCB that combines the SAS data transceivers, the 64 MB DRAM cache, and the proprietary HGST servo controller. Field failures are most commonly attributed to PCB burn damage (per hddfaqs.com data) rather than media wear. When matching a replacement PCB, capture the Main Controller IC Number and the White Label / ROM contents exactly - firmware is married to the drive's adaptive parameters and re-flashing the ROM from a donor drive rarely restores full performance.
The SAS 6 Gb/s interface multiplexes two discrete ports (primary plus secondary) within the same SFF-8482 connector. When deploying dual-port to two separate HBAs (A and B), ensure the backplane routes each pair to a separate connector segment. Mixing ports on the same HBA defeats redundancy and turns dual-port into an extra-cost single-port. Per the SAS SFF-8482 specification the secondary port's pins (P25-P29) must be actively terminated if unused, otherwise signal reflection can degrade primary-port performance under heavy load.
Compliance-Informationen
RoHS and REACH compliant per HGST product page. Halogen-free status not explicitly stated in retrieved data; left as 'unknown'. AEC-Q100 not applicable (this is a rotational storage HDD, not an automotive semiconductor). Lead-free assembly confirmed.
