LBEU5ZZ1WL-857EVB - LoRa WiFi BLE GNSS Eval Board | Murata
Teilenummer: LBEU5ZZ1WL-857EVB ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
LBEU5ZZ1WL-857EVB Übersicht
An evaluation board is a hardware development platform that exposes all functional interfaces of a core module - power, RF antenna ports, UART/SPI/I2C debug links, GPIO and programming headers - so firmware and RF performance can be characterized before committing to a custom PCB. In the product hierarchy, it sits above the surface-mount module itself and below production hardware, serving as the reference design anchor for OEM integrators.
Key capabilities of the underlying module include ultra-low power operation for long battery life, superior RF sensitivity for weak-signal GNSS and LoRa reception, and high flexibility for building low-cost IoT tracking devices in both indoor and outdoor environments. Multi-technology fusion - GPS/GNSS, GPS sniffing, Wi-Fi sniffing, BLE sniffing, and LoRa radio triangulation - allows the same hardware to localize assets where a single technology fails, such as deep indoor or dense urban canyons. When paired with Actility ThingPark geolocation services, raw RF listening data is converted into actionable position fixes.
The board is certified under the module's Single Modular Approval: FCC ID VPYLB1WL and IC 772C-LB1WL. Note the module is limited to OEM installation; the OEM integrator is responsible for ensuring the end user cannot remove or install the module in production hardware. During development on the EVB this restriction does not apply.
Typical applications include asset trackers, fleet management devices, cold-chain loggers, smart-city sensors, and any battery-powered device requiring hybrid indoor/outdoor positioning. Engineers use the EVB to validate antenna selection (antenna not included with the module), measure current consumption profiles, and prototype firmware on the STM32WB55 before board spin.
A key design consideration: because four radios share one RF ecosystem, antenna placement and isolation measurements performed on this EVB should be replicated carefully in production layouts, as the module itself ships without an antenna.
This page synthesizes distributor listings, Murata datasheet references, certification identifiers, and practical integration notes not consolidated in the manufacturer datasheet alone. Pricing for LBEU5ZZ1WL-857EVB as of 2026-10-19 is not published in standard distribution catalogs and is available on request.
Drop-in-Alternativen für LBEU5ZZ1WL-857EVB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LBEU5ZZ1WL-857SMP
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LBEU5ZZ1WL-857
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LBEU5ZZ1WL-857EVB Spezifikationen (herstellerveröffentlicht)
| Product Type | Evaluation Board for Type 1WL-857 Module |
| Core Module | LBEU5ZZ1WL-857 (Type 1WL-857) |
| LoRa/GNSS/Wi-Fi Transceiver | Semtech LR1110 |
| MCU / Bluetooth Chipset | STMicroelectronics STM32WB55VGY6 |
| Radio Technologies | LoRa, Wi-Fi 802.11 b/g/n (passive scan), Bluetooth 5.2 LE, GNSS |
| Frequency Range (2.4 GHz radios) | 2.402 GHz to 2.48 GHz |
| Wi-Fi Standard | IEEE 802.11 b/g/n (sniff / passive scanner) |
| Bluetooth Version | Bluetooth 5.2 LE |
| GNSS Support | GPS/GNSS plus GPS sniffing |
| Positioning Technologies | GNSS, Wi-Fi sniffing, BLE sniffing, LoRa radio triangulation |
| Antenna | Antenna not included (external antenna required) |
| Mounting (core module) | Surface Mount |
| FCC ID | VPYLB1WL |
| ISED Certification ID | 772C-LB1WL |
| Module Certification | FCC/ISED Single Modular Approval (OEM installation only) |
| Geolocation Platform Support | Actility ThingPark geolocation |
LBEU5ZZ1WL-857EVB Schnittstellen & Anschlüsse
LBEU5ZZ1WL-857EVB bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Funk, Bluetooth. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Funk | Semtech LR1110 |
| Bluetooth | STMicroelectronics STM32WB55VGY6 |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Typische Anwendungen
LBEU5ZZ1WL-857EVB ist geeignet für 6 Anwendungs: Battery-Powered Asset Tracking, Fleet Management and Logistics, Indoor Asset Visibility in Warehouses, Smart City and Outdoor IoT Sensors, Cold Chain and Shipment Monitoring, Wearable and Personnel Safety Devices.
Battery-Powered Asset Tracking
The LBEU5ZZ1WL-857EVB is the reference platform for developing battery-powered asset trackers built on Murata's Type 1WL-857. The module's ultra-low power design targets long battery life, which is the primary constraint in trackers that must operate for months or years on a single cell. Its fused positioning - GNSS outdoors, Wi-Fi 802.11 b/g/n passive scanning and BLE sniffing indoors via the Semtech LR1110, plus LoRa triangulation - lets firmware select the cheapest positioning fix available at each moment, conserving energy that a GNSS-only design would waste. During development on the EVB, engineers profile sleep-mode and active-mode current on the STM32WB55VGY6 application core and validate that antenna choices meet sensitivity budgets before production layout. Integration with Actility ThingPark geolocation converts sniffed RF data into position fixes server-side.
Empfohlen
Fleet Management and Logistics
Fleet telematics demands continuous position reporting across urban canyons, warehouses, and highways - conditions where no single radio technology is reliable. The Type 1WL-857 addresses this by fusing GPS/GNSS, GPS sniffing, Wi-Fi sniffing, BLE sniffing, and LoRa radio triangulation in one surface-mount module, and the LBEU5ZZ1WL-857EVB lets developers validate each positioning mode against their fleet's real route profiles before committing hardware. LoRaWAN uplink keeps connectivity costs far below cellular alternatives for low-rate position reports, and the module's FCC Single Modular Approval (FCC ID VPYLB1WL, IC 772C-LB1WL) reduces certification effort for the finished tracker. The EVB's exposed interfaces allow gateway compatibility testing with Actility ThingPark geolocation, the platform that interprets the module's RF observations into fleet-visible location data.
Empfohlen
Indoor Asset Visibility in Warehouses
Inside warehouses and factories, GNSS signals are unusable, so indoor tracking depends on radio environment sensing. The LBEU5ZZ1WL-857EVB demonstrates the Type 1WL-857's Wi-Fi 802.11 b/g/n passive scanner and BLE 5.2 sniffing (2.402 GHz to 2.48 GHz), which observe nearby access points and beacons without associating - a low-power operation mode well suited to battery tags. LoRa triangulation via the Semtech LR1110 adds a private-infrastructure fallback where Wi-Fi density is low. Engineers use the EVB to measure how sniff cycle timing affects battery life and positional accuracy, tuning the duty cycle for their site's radio density. Murata specifically markets this module family for low-cost IoT tracking in indoor environments, and the EVB is the fastest path to a validated proof of concept on that platform.
Empfohlen
Smart City and Outdoor IoT Sensors
Outdoor smart-city nodes - parking sensors, waste containers, environmental monitors - need occasional position or presence fixes over LPWAN links. The Type 1WL-857's LoRaWAN connectivity, handled by the Semtech LR1110, provides kilometer-scale range with minimal power, while GNSS supplies absolute position when required. The LBEU5ZZ1WL-857EVB lets city-technology integrators verify RF link budgets with their chosen antenna (not included with the module) and validate firmware on the STM32WB55VGY6 before volume deployment. Murata's positioning of the module for 'low-cost IoT tracking devices for both indoor and outdoor environments' maps directly to mixed urban deployments where a sensor may sit in shade one block and open sky the next; fused GNSS plus Wi-Fi/BLE sniffing keeps fixes reliable across both conditions on a single hardware design.
Empfohlen
Cold Chain and Shipment Monitoring
Cold-chain loggers travel through refrigerated trucks, cargo holds, and storage facilities - a chain of environments alternating between GNSS-visible and RF-shielded. The LBEU5ZZ1WL-857EVB is the development platform for loggers based on the Type 1WL-857, whose combination of GNSS for the transport legs and Wi-Fi/BLE sniffing for warehouse legs produces a continuous location trace without cellular roaming cost, using LoRaWAN for uplinks where gateways exist. The module's ultra-low power design supports the multi-week to multi-month battery targets typical of disposable or reusable shipment loggers. On the EVB, engineers validate that sniff-based indoor fixes update fast enough to detect route deviations and confirm the Semtech LR1110's sensitivity meets their packaging attenuation budget, since metalized insulation and refrigerated containers add significant RF loss.
Empfohlen
Wearable and Personnel Safety Devices
Personnel safety badges and lone-worker devices need dependable positioning in buildings, campuses, and remote sites, plus a low-energy companion link for configuration and SOS signaling. The Type 1WL-857 delivers this: GNSS and Wi-Fi/BLE sniffing (via the Semtech LR1110) provide location, LoRaWAN provides long-range alerting, and the STM32WB55VGY6's Bluetooth 5.2 LE gives smartphone pairing for setup and emergency interaction. The LBEU5ZZ1WL-857EVB enables wearable developers to benchmark real-world battery drain across positioning modes - the decisive factor in wearable form factors - and to test antenna Miniaturization effects, since the module ships without an antenna and small wearable antennas trade gain for size. Murata's certification as an FCC/ISED Single Modular module further simplifies regulatory entry for small-run safety product lines.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LBEU5ZZ1WL-857EVB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LBEU5ZZ1WL-857SMP | LBEU5ZZ1WL-857 |
|---|---|---|---|
| Brand | Murata Manufacturing | Murata Manufacturing | Murata Manufacturing |
| Package / Form Factor | Evaluation board (Type 1WL-857 EVB) | Surface-mount module, sample unit | Surface-mount module |
| Purpose | Development and evaluation | Module sampling | Production integration |
| LoRa Support | Yes (Semtech LR1110) | Yes (Semtech LR1110) | Yes (Semtech LR1110) |
| Wi-Fi | 802.11 b/g/n passive scan | 802.11 b/g/n passive scan | 802.11 b/g/n passive scan |
| Bluetooth | 5.2 LE (STM32WB55VGY6) | 5.2 LE (STM32WB55VGY6) | 5.2 LE (STM32WB55VGY6) |
| GNSS | Yes (LR1110) | Yes (LR1110) | Yes (LR1110) |
| Antenna Included | No - external antenna required | No - external antenna required | No - external antenna required |
Wichtigste Unterscheidungsmerkmale
- Four fused positioning technologies in one platform (vs. LBEU5ZZ1WL-857)
- Certified modular approval testing (vs. LBEU5ZZ1WL-857SMP)
- Direct STM32WB55 firmware development (vs. LBEU5ZZ1WL-857)
Designhinweise
When moving from the LBEU5ZZ1WL-857EVB to production, replicate the EVB's antenna section exactly or re-validate: the Type 1WL-857 module ships without an antenna, so GNSS sensitivity, Wi-Fi sniffing range, and LoRa link budget all depend on your antenna choice and layout. Keep the module's RF keep-out per the Murata Type 1WL-857 datasheet (Rev. B) and avoid routing high-speed STM32WB55 signals under the antenna area.
The module's FCC/ISED Single Modular Approval (FCC ID VPYLB1WL, IC 772C-LB1WL) applies to OEM installations only. Per the user manual, the OEM integrator must ensure the end user has no means to remove or install the module in the final product - use enclosures or mechanical retention that prevent user access. Losing modular-approval conditions shifts full intentional-radiator certification onto your finished product.
The module's headline benefit is ultra-low power for battery operation, but positioning mode dominates consumption: GNSS fixes cost far more energy than Wi-Fi or BLE sniffing. Use the EVB to profile each mode's current on the STM32WB55VGY6 firmware and implement adaptive positioning - GNSS only when sniff-based fixes are unavailable - to maximize battery life in production trackers.
Compliance-Informationen
Radio compliance verified: FCC ID VPYLB1WL and IC 772C-LB1WL Single Modular Approval per module user manual. OEM installation only. Other environmental compliance data not present in verified sources.