onsemi

LM258DMR2 - Dual 1MHz Op Amp, 3-32V | onsemi

Teilenummer: LM258DMR2 ✓ Aktiv
3 V to 32 V Vdss 45 nA typical Id 8-MSOP Package
MOQ: 1 |

LM258DMR2 Übersicht

The onsemi LM258DMR2 is a dual general-purpose operational amplifier with two independent circuits, a 1 MHz gain-bandwidth product, a 3 V to 32 V supply range, and an 8-pin MSOP package. It is intended for low-cost signal conditioning, industrial control, and general-purpose analog circuits operating from a single supply or split supplies.

An operational amplifier, or op amp, is an analog building block that amplifies the voltage difference between its two inputs. The LM258 belongs to the operational-amplifier hierarchy within analog and mixed-signal ICs. Its input stage can operate down to the negative supply rail, including ground in single-supply systems, which makes it useful for circuits that process signals referenced to 0 V.

Key characteristics include a 1 MHz gain-bandwidth product, typical input bias current of 45 nA, and typical quiescent current of 800 µA per channel. The device supports single-supply or split-supply operation, while its common-mode input range extends to ground or VEE. These characteristics make it suitable for transducers, sensors, audio stages, feedback networks, and low-frequency control loops.

The LM258 architecture uses two independent amplifier channels in one package, reducing component count and board area compared with discrete single-channel amplifiers. Its low-power design favors general-purpose applications where low quiescent current is more important than wide-bandwidth performance. The 8-MSOP outline also gives PCB designers a compact surface-mount option, although its lead pitch differs from standard SOIC and DIP packages.

Typical applications include sensor amplification in industrial equipment, current-loop receivers, audio preamplifier stages, motor or actuator control interfaces, and general low-frequency signal-conditioning boards. Split-supply operation can simplify biasing around bipolar signals, while single-supply operation is useful when the signal remains near the ground rail.

When designing around the LM258DMR2, verify that every input remains within the common-mode range and that output swing stays within the supply rails under load. Input bias and offset currents define the practical impedance range of source and feedback networks. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer guidance rather than left floating.

This product page combines the manufacturer-device identity, verified distributor records, parameter comparison fields, and practical design guidance to support component selection, footprint review, and replacement planning for the LM258DMR2.

Drop-in-Alternativen für LM258DMR2 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.

Alternativen anfordern

LM258DMR2 Grenzwerte & elektrische Eigenschaften

Number of Amplifier Channels 2 channels
Number of Circuits 2 circuits
Gain-Bandwidth Product 1 MHz
Supply Voltage Range 3 V to 32 V
Input Bias Current 45 nA typical
Ruhestrom 800 µA per channel typical
Common-Mode Input Range Extends to ground or VEE
Supply Configuration Single supply or split supply
Gehäuse 8-MSOP
Montageart Surface mount
Product Type General-purpose operational amplifier
Low-Power Operation Low-power dual operational amplifier

LM258DMR2 8-msop Pinbelegungsleitfaden

Pinbelegung für LM258DMR2 (8-msop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM258DMR2 im 8-msop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM258DMR2.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM258DMR2 ist geeignet für 6 Anwendungs: Industrial Sensor Signal Conditioning, Audio Preamplifier Stage, Current-Loop Receiver Interface, Motor and Actuator Control Interface, Battery-Powered Monitoring Circuit, Power-Supply Feedback and Monitoring.

🏭

Industrial Sensor Signal Conditioning

The LM258DMR2 fits low-frequency sensor-amplifier stages that operate from a 3 V to 32 V supply. Its 45 nA typical input bias current limits the error introduced by high-impedance sensors, while the common-mode input range extending to ground or VEE supports single-supply sensing near 0 V. Place the amplifier close to the sensor interface and use short feedback paths to reduce noise pickup. The 1 MHz gain-bandwidth product is suitable for modest closed-loop gains, but it does not target precision or high-speed instrumentation. Confirm the sensor output range, required offset accuracy, and operating temperature before finalizing the circuit.

🎧

Audio Preamplifier Stage

The LM258DMR2 can provide low-frequency audio preamplification when bandwidth beyond the 1 MHz gain-bandwidth product is unnecessary. Its dual-channel configuration supports left and right signal paths in one 8-MSOP package, reducing board space compared with two separate amplifiers. The common-mode input range reaches toward ground or VEE, making the device practical for single-supply audio boards with signals centered around the lower rail. Adequate supply decoupling and quiet ground-return layout are essential because audio performance is influenced by both the op amp and the surrounding passive network. Verify output swing, channel matching, and the required frequency response before using it in a precision audio path.

⚡

Current-Loop Receiver Interface

The LM258DMR2 is suited to low-frequency current-loop receivers that require an amplifier operating near the ground rail. Its input common-mode range extends to ground or VEE, while the 3 V to 32 V supply rating supports industrial interface electronics. The dual package can implement receiver and auxiliary gain functions on one board. Keep the input impedance high enough to avoid loading the sensor loop and account for input bias current when designing the first stage. The 1 MHz bandwidth limits high-frequency loop speed, making this device more appropriate for process-control loops than for wideband instrumentation. Confirm grounding, isolation requirements, and transient protection separately.

🔧

Motor and Actuator Control Interface

The LM258DMR2 can form the low-frequency error amplifier and driver-interface portion of an industrial motor or actuator control circuit. Its 1 MHz gain-bandwidth product supports control loops well below that frequency, while dual channels can be used for drive and feedback functions. The 3 V to 32 V supply range provides flexibility across 5 V, 12 V, and 24 V system rails, although the output current and output swing must satisfy the actuator-driver requirements. Use an external transistor or power stage rather than driving a load directly. Keep power-current paths away from the sensitive op-amp ground reference and validate stability across temperature and supply tolerance.

🧩

Battery-Powered Monitoring Circuit

The LM258DMR2 works in low-power monitoring electronics because its typical quiescent current is 800 µA per channel and its supply range begins at 3 V. These characteristics support battery-operated sensor, alert, and remote-monitoring systems that cannot use a continuously powered precision amplifier. The common-mode input range extending toward ground or VEE also assists with single-cell signal conditioning. A duty-cycled design can further reduce average consumption. Check the exact quiescent-current behavior over the complete input and output range in the onsemi datasheet, since typical and maximum figures serve different sizing purposes. Select capacitors and resistors for the required accuracy and shelf-life targets.

🔋

Power-Supply Feedback and Monitoring

The LM258DMR2 can supervise a regulated supply or amplify a feedback signal around a low-frequency power-control loop. Its 3 V to 32 V operating range allows monitoring across common industrial voltage rails, while the dual architecture can combine a control amplifier with a voltage-detection channel. The 1 MHz gain-bandwidth product is sufficient for many slow feedback systems but may require compensation for particular power topologies. Use the pin-description table in the onsemi datasheet for the exact configuration, and ensure the amplifier ground remains referenced to the control system rather than a high-current switching return. Validate startup, overload, and fault-response behavior in the complete converter design.

Zusammenfassung der empfohlenen Produkte

LM258DMR2 onsemi Verwendet in: Industrial Sensor Signal Conditioning, Audio Preamplifier Stage, Current-Loop Receiver Interface, Motor and Actuator Control Interface, Battery-Powered Monitoring Circuit, Power-Supply Feedback and Monitoring LM258DMR2G Same-family ordering option for an 8-MSOP sensor interface Verwendet in: Industrial Sensor Signal Conditioning, Audio Preamplifier Stage, Current-Loop Receiver Interface, Motor and Actuator Control Interface, Battery-Powered Monitoring Circuit, Power-Supply Feedback and Monitoring
What is the operating voltage range of LM258DMR2?
The LM258DMR2 operates from 3 V to 32 V across its full supply range. According to the onsemi LM258 datasheet, it accepts a single positive supply or split positive and negative supplies. The input common-mode range extends toward ground or VEE, allowing the amplifier to process signals close to the lower supply rail in single-supply systems.
What are the key specifications of LM258DMR2 that engineers should know?
The LM258DMR2 is a dual general-purpose operational amplifier with a 1 MHz gain-bandwidth product, 45 nA typical input bias current, and 800 µA typical quiescent current per channel. It operates from 3 V to 32 V and is packaged in an 8-MSOP. According to the onsemi datasheet, its common-mode input range extends to ground or VEE.
Is LM258DMR2 suitable for single-supply operation?
Yes, the LM258DMR2 is suitable for single-supply operation because its common-mode input range extends to ground or VEE. According to the onsemi LM258 datasheet, this characteristic simplifies signal conditioning for sensors whose output lies near 0 V. The output must still remain inside the supply rails, and the application should account for input and output offset errors.
What type of operational amplifier is LM258DMR2?
The LM258DMR2 is a dual, general-purpose operational amplifier with two independent amplifier circuits. It provides a 1 MHz gain-bandwidth product and a typical input bias current of 45 nA. According to the onsemi LM258 datasheet, it supports 3 V to 32 V operation, single or split supplies, and an 8-MSOP package.
What is the pinout of LM258DMR2?
The LM258DMR2 uses an 8-MSOP package, but the verified device records do not expose the numbered pin descriptions. Use the pin-description table in the onsemi LM258 datasheet when assigning PCB tracks, especially because the two channels occupy separate pins and the supply pins must be connected correctly. Do not infer pin functions from a visually similar dual amplifier without checking the exact datasheet.
Where can I download the LM258DMR2 datasheet PDF?
The LM258DMR2 datasheet PDF can be accessed through the onsemi-linked datasheet entry and the manufacturer-document listings identified for this exact MPN. The onsemi LM258 datasheet is the authoritative document for the MSOP pinout, electrical limits, recommended operating conditions, and typical application circuits. Select the document matching LM258DMR2 or LM258DMR2G rather than a generic LM358 document.
Where can I buy LM258DMR2 and check current lead time?
Use the Request a Quote form on this page to request LM258DMR2 pricing, current stock, minimum order quantity, and production lead time. The quote form provides a direct purchasing path without relying on stale catalog pricing. Include your target quantity, shipment destination, and required date so the supplier can confirm the exact 8-MSOP orderable configuration.
What is the price of LM258DMR2?
Submit the Request a Quote form on this page for the current LM258DMR2 unit price and volume breaks. Commercial terms can change with quantity, inventory, and delivery requirements, so the live quote is the appropriate purchasing reference. Request the exact MPN LM258DMR2 and specify reel, tray, or another required shipment format.
Is LM258DMR2 in stock and what is the lead time?
Current stock and lead time for LM258DMR2 should be confirmed through the Request a Quote form on this page. Provide the required quantity, shipment destination, and target delivery date. This avoids treating a general catalog listing as a firm inventory commitment and lets the supplier confirm the exact MPN and packaging configuration.
What can replace LM258DMR2?
No verified pin-compatible replacement with a different manufacturer was established for the LM258DMR2 8-MSOP footprint. A functional equivalent may offer similar electrical performance, but a true drop-in replacement must also match the MSOP pin assignments, supply range, input/output common-mode limits, and stability requirements. Use the onsemi LM258 datasheet and verify the candidate pinout before approving a substitute.
Is LM258DMR2 the same as LM258DMR2G?
LM258DMR2 and LM258DMR2G identify onsemi variants of the same dual LM258-family amplifier and both are listed in 8-MSOP packaging. The G suffix represents an ordering or packaging distinction rather than a different amplifier function. Confirm the manufacturer ordering information and required shipment format before treating one suffix as interchangeable with the other.
What is the best onsemi equivalent for LM258DMR2?
LM258DMR2G is the closest onsemi ordering option identified because it is listed in the same 8-MSOP package and belongs to the same LM258 family. It does not provide a functional upgrade, so the decision is primarily ordering-code and packaging confirmation rather than performance optimization. For another manufacturer, require an exact 8-MSOP pinout and electrical comparison before substitution.
When should I choose LM258DMR2 instead of a faster op amp?
Choose the LM258DMR2 when low cost, low quiescent current, and a 1 MHz gain-bandwidth product are more important than high-speed performance. Its dual general-purpose architecture is appropriate for sensor interfaces, audio stages, and low-frequency industrial control. Select a faster amplifier when signal slew rate, bandwidth, or low-noise precision requirements exceed the LM258 design envelope.
Is LM258DMR2 suitable for industrial sensor conditioning?
The LM258DMR2 can suit low-frequency industrial sensor-conditioning circuits because it offers 3 V to 32 V supply operation, 45 nA typical input bias current, and a common-mode input range extending to ground or VEE. According to the onsemi datasheet, it supports single and split supplies. Verify sensor output range, accuracy requirements, temperature limits, and electromagnetic conditions before release.
LM258DMR2 vs LM2902N/PB - which is better for a new design?
LM258DMR2 is generally the better fit when an 8-MSOP footprint is required because LM2902N/PB is a through-hole DIP package and does not share the same PCB land pattern. Both belong to related dual general-purpose amplifier families, but package compatibility, supply range, offset performance, and exact pin functions must be checked against the respective datasheets. The DIP part may still be useful for prototypes or existing THT boards.

Technische Referenzdaten für LM258DMR2 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM258DMR2 when the design needs a low-cost, low-power dual general-purpose op amp in an 8-MSOP package and the signal bandwidth is comfortably below 1 MHz. Its ground-referenced common-mode capability is especially useful for single-supply sensors and control signals. LM258DMR2G is an ordering-code alternative within the same onsemi family, so confirm the suffix and shipment format rather than assuming a functional difference. LM2902N/PB may be suitable for a through-hole prototype, but it is not a PCB drop-in for the MSOP footprint. LM324ADR also offers a familiar general-purpose architecture in a different package and should be selected only after comparing supply range, offset, bandwidth, and pinout. For any different-manufacturer candidate, require an exact 8-MSOP land pattern, matching pin assignments, and verification of the common-mode range and stable operation with the intended load.

Vergleich mit Alternativen

Parameter Dieses Produkt
Brand onsemi
Package 8-MSOP
Amplifier Channels 2 channels
Supply Voltage Range 3 V to 32 V
Gain-Bandwidth Product 1 MHz
Input Bias Current 45 nA typical
Quiescent Current 800 µA per channel typical
Common-Mode Input Range Extends to ground or VEE
Supply Configuration Single supply or split supply
Product Class General-purpose operational amplifier

Wichtigste Unterscheidungsmerkmale

  • Compact dual-amplifier implementation (vs. LM2902N/PB)
  • Single-supply input capability near the ground rail (vs. LM2902N/PB)
  • Lower power suited to compact analog interfaces (vs. LM324ADR)

Designhinweise

Do not assume that an amplifier can accept every input level shown by its supply voltage. The LM258 common-mode range extends toward ground or VEE, but the exact allowable range still depends on supply conditions and channel state. Likewise, confirm output swing before designing a stage that must reach a rail. Use the pin-description and electrical-characteristics tables in the onsemi LM258 datasheet when assigning inputs, outputs, supply pins, and the two channels.

Place the supply-decoupling capacitor immediately between the positive and ground supply pins, with the shortest practical trace loop. The 8-MSOP footprint has closely spaced leads, so preserve solder-mask and copper clearances defined by the package drawing. Route the two channels separately if they carry unrelated signals, and keep high-current motor or switching returns from sharing sensitive amplifier-ground paths.

Treat the op amp as part of a complete feedback system rather than selecting it from bandwidth alone. With a 1 MHz gain-bandwidth product, practical closed-loop bandwidth depends on noise gain, operating level, load, and compensation network. Avoid large capacitances at the output unless the load and stability requirements are checked, and evaluate noise-gain peaking before using the device in a precision signal chain.

Power dissipation is the product of supply voltage and channel current, including quiescent current and load-dependent output current. The typical quiescent current is 800 µA per channel, so low-load dissipation can remain modest, but a large supply-to-output difference increases the thermal burden. Use copper area around the MSOP for heat spreading and verify the maximum supply, output current, and ambient-temperature limits before release.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The verified device records do not state the requested compliance attributes. Confirm them from the manufacturer product documentation before releasing the component into a regulated design.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

LM258DMR2 datasheet LM258DMR2 pinout LM258DMR2 datasheet pdf LM258DMR2 8-MSOP LM258DMR2 1MHz op amp LM258DMR2 3-32V amplifier LM258DMR2 dual amplifier LM258DMR2 equivalent LM258DMR2 replacement onsemi LM258DMR2 LM258DMR2 price LM258DMR2 stock

Verwandte Bauteile & Begriffe

onsemi LM258DMR2 LM258DMR2G LM258 LM2902N/PB LM324ADR dual operational amplifier operational amplifier op amp analog IC signal conditioning common-mode input range gain-bandwidth product input bias current quiescent current single-supply operation split-supply operation 8-MSOP surface mount industrial sensor interface audio preamplifier current-loop receiver power-supply feedback
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen