Texas Instruments

LM324KAPWR - Quad 2 kV ESD Op Amp | Texas Instruments (Tape & Reel)

Teilenummer: LM324KAPWR ✓ Aktiv
Single positive supply Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324KAPWR Übersicht

Texas Instruments LM324KAPWR is a quad general-purpose operational amplifier with 2 kV ESD protection, four amplifier channels, and a 14-pin TSSOP package. The device is intended for single-supply operation and is identified in manufacturer-related listings as a standard general-purpose amplifier.

An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to compare two input voltages and drive an output according to their difference. The quad LM324 combines four amplifiers in one package, reducing component count and simplifying layout in audio, sensor, filtering, and control circuits. As a general-purpose amplifier, it belongs to the operational-amplifier hierarchy within integrated circuits and analog signal processing.

The principal device-level features include four amplifier channels, a 14-pin TSSOP package, operation from a single positive supply, and 2 kV ESD protection. Searchable manufacturer product information identifies the LM324KAPWR as a general-purpose amplifier, while comparison data lists a gain-bandwidth product of 1.2 MHz. The four-channel integration allows one package to support independent filtering, buffering, amplification, or feedback-control functions.

The LM324 architecture is suited to low-cost, low-frequency analog designs where moderate bandwidth and straightforward external compensation are sufficient. Its quad organization can reduce board area compared with four single-amplifier packages. Designers should still account for input common-mode range, output swing, supply headroom, input bias current, and stability when selecting external feedback components for a specific topology.

Typical applications include low-frequency audio signal conditioning, resistive sensor amplification, active filtering, DC error amplification, and general feedback control. The same package can also be used for multi-stage signal conditioning where four channels must operate independently. For instrumentation or precision measurement designs, verify the complete electrical limits and noise performance against the manufacturer datasheet before finalizing the gain and bandwidth budget.

PCB implementation should preserve short feedback paths, provide an unobstructed ground return, and decouple the supply close to the IC. The TSSOP-14 lead pitch also makes the device practical for compact, high-density analog assemblies. Avoid long signal traces between input and output nodes because parasitic capacitance can alter feedback behavior or cause instability in high-gain configurations.

This product record combines manufacturer-related product descriptions, package information, cross-reference findings, and practical engineering guidance. The comparison section distinguishes true pin-compatible options from alternatives that may require a footprint or pinout change, while the design notes emphasize supply bypassing, feedback layout, and stability checks that are important when replacing a quad amplifier in an existing design.

Drop-in-Alternativen für LM324KAPWR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM324KAPWR (gleiche Bauform und Footprint) – abweichend in Amplifier Type, Package Type, Supply Configuration, Number of Amplifiers, Number of Channels.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Supply Configuration: Single or dual supply
Number of Amplifiers: 4 circuits
Vergleichen mit LM324KAPWR →
Texas Instruments
Amplifier Type: General Purpose
Package Type: 14-TSSOP
Supply Configuration: Single supply or split supply
Vergleichen mit LM324KAPWR →
Texas Instruments
Package Type: 14-pin TSSOP
Supply Configuration: Single supply or split supply
Number of Channels: 4 independent channels
Vergleichen mit LM324KAPWR →

LM324PWRG4

✅ Drop-In
Texas Instruments
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 independent channels · 1.2 MHz · 3 V to 32 V total · ±16 V · Single supply or split supply · Yes · High-gain, internally compensated

Preis auf Anfrage

Datenblatt ansehen →

LM324PWRG3

✅ Drop-In
Texas Instruments
📦 TSSOP-14
General Purpose · 4 circuits · 4 amplifiers · Four independent high-gain, frequency-compensated operational amplifiers · 1.2 MHz · 0.5 V/µs · 14-TSSOP · 0.173 in (4.40 mm)

Preis auf Anfrage

Datenblatt ansehen →

LM324APWR

✅ Drop-In
Texas Instruments
📦 TSSOP-14
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Preis auf Anfrage

Datenblatt ansehen →

LM324KAPWRG4

✅ Drop-In
Texas Instruments
📦 TSSOP-14
Quad general-purpose operational amplifier · 4 circuits · 14-TSSOP · Surface mount · Single or dual supply · 26 V · 13 V per rail · 0.8 mA

Preis auf Anfrage

Datenblatt ansehen →

LM324KAPWR Grenzwerte & elektrische Eigenschaften

Amplifier Type Quad general-purpose operational amplifier
Number of Channels 4 channels
Number of Circuits 4 circuits
ESD Protection 2 kV
Gain-Bandwidth Product 1.2 MHz
Gehäuse 14-pin TSSOP
Package Type TSSOP-14
Montageart Surface mount
Supply Type Single positive supply

LM324KAPWR tssop-14 Pinbelegungsleitfaden

Pinbelegung für LM324KAPWR (tssop-14-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM324KAPWR im tssop-14-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM324KAPWR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM324KAPWR ist geeignet für 6 Anwendungs: Low-Frequency Audio Signal Conditioning, Resistive Sensor Signal Amplification, Active Audio and Communication Filters, DC Control and Error Amplification, General-Purpose Buffering and Level Conditioning, Instrumentation and Measurement Front Ends.

🎧

Low-Frequency Audio Signal Conditioning

The LM324KAPWR can implement low-frequency audio preamplification, buffering, and filtering because it integrates four general-purpose amplifier channels with a 1.2 MHz gain-bandwidth product. The quad arrangement allows several stages to be packaged without using four separate ICs. A typical circuit uses one channel for input amplification and another for an active low-pass filter. Verify output swing, common-mode range, and rail-to-rail behavior against the signal amplitude before deployment. Decouple the supply near the device and keep feedback loops short to reduce instability risk. This is a practical fit for line-level or low-frequency audio control circuits, not a high-bandwidth audio performance amplifier.

🧩

Resistive Sensor Signal Amplification

The LM324KAPWR is appropriate for conditioning outputs from resistive sensors such as temperature, position, and bridge-based sensing elements. Its four channels can provide excitation buffering, instrumentation-stage amplification, offset conditioning, and output filtering within one package. The 1.2 MHz gain-bandwidth product is generally more than adequate for slow-moving sensor signals, while the principal limits are input bias current, offset voltage, common-mode range, and output swing. Select resistor values for the required sensitivity without making bandwidth unnecessarily high. A dedicated low-offset amplifier may be preferable when precision at low signal levels is more important than cost and integration.

🌐

Active Audio and Communication Filters

The four channels in LM324KAPWR support multiple active-filter sections on one PCB, including low-pass, high-pass, band-pass, and notch stages operating at low frequencies. Its 1.2 MHz gain-bandwidth product provides useful margin above typical audio-band and low-frequency control-filter requirements. Four filters can be placed in one package, simplifying power routing and reducing footprint. Component tolerances and amplifier open-loop gain determine the actual filter response, so simulate the closed-loop network across its operating range. Keep the grounded reference and feedback components compact, and avoid routing inputs beside high-impedance output nodes. The device is well suited to general-purpose filtering when moderate bandwidth and low cost are priorities.

🏭

DC Control and Error Amplification

LM324KAPWR can implement DC error amplifiers, comparator-like control loops, and closed-loop regulation stages when the required loop bandwidth is low. One channel may amplify the error voltage, while other channels provide signal conditioning or drive a control function. The single-positive-supply architecture supports compact control systems, but the output must remain inside the device’s allowable swing and common-mode limits. Avoid using the amplifier where a saturated output must switch rapidly, because its intended strength is linear amplification rather than high-speed comparator operation. Stable feedback layout, adequate supply bypassing, and careful grounding are essential. Check startup, overload recovery, and loop stability in the final converter or actuator-control circuit.

🔧

General-Purpose Buffering and Level Conditioning

The LM324KAPWR can serve as a unity-gain buffer or impedance-matching stage between higher-impedance sensors and downstream analog circuitry. Four channels make it convenient to buffer several control, sensing, or reference-related nodes in one package. A voltage follower still requires adequate output-voltage headroom and must remain inside the input common-mode range, especially near the supply rails. Place input and output components close to their assigned pins, maintain a continuous ground reference, and avoid long high-impedance traces that increase noise pickup. For precision instrumentation, assess input bias current and offset against the source impedance. For low-cost general-purpose buffering, the quad integration can reduce both component count and PCB area.

🖥️

Instrumentation and Measurement Front Ends

LM324KAPWR can provide the first stages of a general-purpose instrumentation front end when signal bandwidth and precision requirements are moderate. Four channels support differential amplification, reference buffering, gain adjustment, and anti-alias filtering. Its 1.2 MHz gain-bandwidth product accommodates slow measurement signals, but input offset and bias errors may become significant with very high source impedances or very small sensor outputs. Select the closed-loop gain carefully so noise gain remains compatible with amplifier stability. Place input resistors close to the amplifier, use a quiet ground return, and decouple the supply at the package. For precision measurement, compare the offset, bias-current, common-mode, and noise specifications with a dedicated instrumentation-amplifier architecture.

What is the LM324KAPWR?
The LM324KAPWR is a Texas Instruments quad general-purpose operational amplifier packaged in a 14-pin TSSOP. It integrates four independent amplifier channels and provides 2 kV ESD protection. The quad format is useful when a design needs several low-frequency analog stages in one package. According to the Texas Instruments product listing, it is classified as a standard general-purpose amplifier with a 1.2 MHz gain-bandwidth product.
How many operational amplifiers are in LM324KAPWR?
The LM324KAPWR contains four operational-amplifier channels in one 14-pin TSSOP package. Manufacturer-related listings identify it as a four-circuit device, while comparison information lists a 1.2 MHz gain-bandwidth product. Each channel can be used independently for buffering, filtering, gain, or feedback-control functions. Confirm the complete pin assignment in the LM324 datasheet before assigning PCB nets.
What package does LM324KAPWR use?
The LM324KAPWR uses a 14-pin TSSOP package intended for surface-mount PCB assembly. The package is identified directly in the Texas Instruments and DigiKey product listings. Its compact lead arrangement reduces board area when compared with four separate single-amplifier packages, although the narrow lead pitch can increase assembly and rework difficulty. Follow the manufacturer land pattern and pin-description table when laying out the footprint.
What are the key specifications of LM324KAPWR that engineers should know?
The principal LM324KAPWR specifications are four amplifier channels, 1.2 MHz gain-bandwidth product, 2 kV ESD protection, single-positive-supply operation, and a 14-pin TSSOP package. The device is positioned as a general-purpose amplifier for low-frequency analog signal conditioning. Exact supply-voltage limits, input offset voltage, bias current, slew rate, common-mode range, and thermal limits must be taken from the manufacturer datasheet before release to production.
Where can I download the LM324KAPWR datasheet PDF?
The LM324KAPWR datasheet PDF is available through the manufacturer’s official LM324 document link and through the indexed LM324KAPWR datasheet result. The official datasheet is the preferred source for the pin description, electrical characteristics, recommended operating conditions, and application information. Use the manufacturer PDF for design sign-off because third-party datasheet mirrors may have different indexing or document revisions.
Where can I find the LM324KAPWR pinout?
The LM324KAPWR pinout is defined in the pin-description table of the Texas Instruments LM324 datasheet. The device uses a 14-pin TSSOP with four amplifier channels, supply pins, and ground pins. Use the datasheet’s numbered package drawing to assign each amplifier’s non-inverting input, inverting input, and output. Confirm orientation from the package marking and pin-1 indicator before fabrication.
Where can I buy LM324KAPWR online?
The LM324KAPWR can be requested through the “Request a Quote” form on this page for current commercial availability, minimum order quantity, and lead-time confirmation. The product is listed by Texas Instruments across multiple authorized-channel-style listings, but stock and delivery schedules can change independently for each order. Submit the exact MPN LM324KAPWR with your required quantity and packaging preference when requesting a quotation.
What is the price of LM324KAPWR?
Current pricing for LM324KAPWR is generated through the “Request a Quote” form on this page because transactional pricing and quantity availability change over time. The structured listing record also contains a last-known unit-price reference, but the live quote should be used for purchasing decisions. Submit the exact 14-pin TSSOP MPN and required order quantity to obtain the current commercial response.
What is the lead time for LM324KAPWR?
The current lead time for LM324KAPWR should be confirmed through the “Request a Quote” form on this page. Lead time can depend on manufacturer inventory, order quantity, and the requested delivery schedule. Because the commercial database is quote-driven, no fixed shipment interval should be assumed. Include your required delivery date and target quantity in the quotation request for an actionable lead-time response.
Is LM324KAPWR in stock?
LM324KAPWR availability is best confirmed through the “Request a Quote” form on this page at the time of purchase. A product page may show a market listing without guaranteeing the same inventory position for your quantity and delivery terms. Request the exact MPN, desired quantity, and shipment destination so the current allocation can be checked against your production schedule.
What can replace LM324KAPWR?
A direct replacement must use the same 14-pin TSSOP footprint and preserve the LM324 pin functions; LM324PWRG4 is identified by cross-reference information as a completely replaceable TSSOP-14 option. Some functional equivalents use a different package or pinout and therefore are not drop-in choices. Verify supply range, common-mode range, output swing, stability, and ESD requirements before approving any replacement.
Is LM324PWRG4 pin-compatible with LM324KAPWR?
LM324PWRG4 is identified as a completely replaceable alternative for LM324KAPWR, with consistent performance characteristics, terminals, and a 14-pin TSSOP package. This makes it the clearest drop-in option in the available cross-reference results. The manufacturer LM324 family should still be checked for parameter differences such as supply limits, temperature range, and grade markings before production substitution.
LM324KAPWR vs LM324PWRG4 — which is better?
LM324PWRG4 is the stronger choice when the requirement is an easy replacement because it is explicitly described as a complete TSSOP-14 replacement for LM324KAPWR. LM324KAPWR remains appropriate when its exact ordering code, temperature grade, qualification status, or delivery conditions are specifically required. Compare the order codes and manufacturer datasheet limits before deciding whether the functional equivalence fully satisfies the application.
When should I choose LM324KAPWR instead of another LM324 variant?
Choose LM324KAPWR when the design specifically requires the exact Texas Instruments order code in a 14-pin TSSOP package and the broader LM324 electrical characteristics are adequate. Choose another compatible LM324 variant when a different temperature grade, qualification level, supply designation, or sourcing condition better matches the design. The deciding factor should be exact ordering-code requirements and verified electrical limits, not only generic pin compatibility.
Is LM324KAPWR suitable for low-frequency sensor and filter applications?
Yes, LM324KAPWR is suitable for many low-frequency sensor, buffer, and active-filter applications because it provides four general-purpose amplifier channels and a 1.2 MHz gain-bandwidth product. Suitability depends on signal amplitude, common-mode range, output swing, noise, and required closed-loop gain. Check the complete datasheet limits and verify stability with the intended feedback network and source impedance.

Technische Referenzdaten für LM324KAPWR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Select LM324KAPWR when the design requires the exact Texas Instruments LM324KAPWR order code, four general-purpose amplifier channels, a 14-pin TSSOP footprint, and the documented 2 kV ESD-protection feature. It is appropriate for low-frequency audio, filtering, sensor conditioning, buffering, and DC-control applications where a 1.2 MHz gain-bandwidth product is sufficient. LM324PWRG4 is the preferred reviewed drop-in candidate because cross-reference information explicitly describes it as completely replaceable with consistent terminals and package. LM324KAPWRRG4 is another identified replacement, but its ordering suffix must be reviewed carefully. LM324PWRG3 and LM324APW belong to the same family and package family, yet exact temperature, qualification, and ordering details require manufacturer confirmation. Functional alternatives such as single or dual amplifiers should not be selected as direct replacements when the existing PCB requires all four channels in one TSSOP-14 footprint.

Vergleich mit Alternativen

Parameter Dieses Produkt LM324PWRG4 LM324PWRG3 LM324APW LM324KAPWRRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14 TSSOP-14
Amplifier Configuration Quad operational amplifier Quad operational amplifier Quad operational amplifier Quad operational amplifier Quad operational amplifier
Number of Channels 4 4 4 4 4
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount

Wichtigste Unterscheidungsmerkmale

  • Exact LM324KAPWR ordering code with integrated ESD protection (vs. LM324PWRG4)
  • Four general-purpose channels in one compact package (vs. LM324APW)
  • Same 14-pin TSSOP footprint as the confirmed drop-in option (vs. LM324PWRG4)

Designhinweise

Place the positive supply-decoupling capacitor close to the supply and ground pins, and provide a low-impedance ground path to the device. Because the TSSOP-14 lead pitch is narrow, route input and feedback nets with short copper paths and avoid passing them beneath or beside output traces. A solid ground plane is generally preferable to long point-to-point ground wiring, especially when four channels share the same package.

Do not assume that every LM324-family part is an unconditional drop-in replacement. Confirm the 14-pin TSSOP footprint, amplifier-channel pin arrangement, supply-voltage range, common-mode input range, output swing, temperature range, and qualification markings against the manufacturer datasheet. The LM324PWRG4 is explicitly identified as completely replaceable, while other family order codes can differ in grade or ordering terminology.

Keep each feedback network compact and place its resistors and capacitors directly across the relevant input and output pins. High closed-loop gain increases sensitivity to parasitic capacitance, and long traces can introduce oscillation or unexpected frequency response. Evaluate stability with the actual source impedance, load capacitance, supply decoupling, and external component tolerances rather than relying only on nominal bandwidth.

Check the amplifier’s input and output voltage against the supply rails before finalizing signal-gain limits. Output saturation can occur even when the closed-loop gain is mathematically correct, particularly in single-supply systems biased near ground. Confirm common-mode and output-swing limits from the manufacturer datasheet and include startup, overload, and supply-bypass conditions in the design review.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Compliance status was not stated in the product records. The automotive qualification field remains unknown because the exact LM324KAPWR grade and qualification claims require confirmation from the manufacturer datasheet.

Ähnliche Suchanfragen

LM324KAPWR datasheet LM324KAPWR pinout LM324KAPWR datasheet pdf LM324KAPWR replacement LM324KAPWR equivalent LM324KAPWR vs LM324PWRG4 LM324KAPWR TSSOP-14 footprint LM324KAPWR 1.2 MHz LM324KAPWR 2 kV ESD Texas Instruments LM324KAPWR LM324KAPWR price LM324KAPWR stock LM324KAPWR audio preamplifier LM324KAPWR sensor amplifier

Verwandte Bauteile & Begriffe

Texas Instruments LM324KAPWR LM324PWRG4 LM324PWRG3 LM324APW LM324KAPWRRG4 LM324ANSR LM2902NSR quad operational amplifier general-purpose amplifier analog integrated circuit single-supply operation gain-bandwidth product ESD protection TSSOP-14 TSSOP package family surface mount active filter sensor signal conditioning audio preamplifier feedback control input common-mode range output swing supply decoupling signal integrity
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen