LPC1101LVUKZ - 50MHz Cortex-M0+ 32KB MCU | NXP
Teilenummer: LPC1101LVUKZ ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $2.4477 | $2,45 |
| 10 | $2.35 | $23,50 |
| 100 | $2.2 | $220,00 |
| 500 | $2.05 | $1.025,00 |
| 1.000 | $1.9 | $1.900,00 |
LPC1101LVUKZ Übersicht
A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, peripherals, and interface logic on one package. The Arm Cortex-M0+ architecture is a compact 32-bit core designed for cost-sensitive embedded control. In the product hierarchy, a Cortex-M0+ MCU is a microcontroller, a semiconductor, and an embedded-processing component used to sense inputs, run control logic, and manage system peripherals.
Verified distributor data identifies the LPC1101LVUKZ as an ARM Cortex-M0/M0+ family MCU with a maximum CPU frequency of 50 MHz and 32 KB flash. The family description also indicates low-cost operation and ARM Cortex-M0-based design. These details make the device useful for compact control panels, embedded accessories, simple industrial modules, and low-cost consumer products where a small microcontroller package can reduce board area.
The 25-UFBGA/WLCSP package is particularly relevant to space-constrained designs. Fine-pitch ball placement requires careful PCB layout, including short power and ground connections, controlled escape routing, and assembly-process compatibility. Because the supplied data does not provide the complete electrical timing, memory map, peripheral list, pin table, or package drawing, those details remain to be confirmed from NXP's current documentation before schematic capture or production release.
The LPC1101LVUKZ should be considered when an engineer needs an Arm Cortex-M0+ MCU at 50 MHz with 32 KB flash in a compact WLCSP package. Verify the exact peripheral set, pin multiplexing, operating voltage, temperature range, package dimensions, and programming requirements against the manufacturer datasheet. NXP cross-reference tools can assist with device selection, but any replacement must be validated for package, pinout, memory, clock, peripheral, and software compatibility.
This page combines verified distributor listings, available pricing and inventory references, manufacturer-oriented documentation links, and package-aware selection guidance for LPC1101LVUKZ evaluation.
Drop-in-Alternativen für LPC1101LVUKZ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LPC1101LVUKZ
✅ Drop-In✓ Auf Lager
$1.9 / Stück
Datenblatt ansehen →LPC1101LVUKZ-ND
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LPC1101LVUKZ Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit microcontroller |
| CPU Core | Arm Cortex-M0+/M0 |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 32 KB |
| Memory Organization | 32K x 8 bits |
| Gehäuse | 25-UFBGA WLCSP |
| Package Type | WLCSP |
| Architecture | 32-bit RISC embedded processing |
| Application Class | Scalable entry-level microcontroller |
| Operating Frequency | Up to 50 MHz |
| Manufacturer | NXP |
| RoHS-Status | unknown |
| REACH Status | unknown |
| Montageart | Surface mount |
LPC1101LVUKZ wlcsp Pinbelegungsleitfaden
Pinbelegung für LPC1101LVUKZ (wlcsp-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für LPC1101LVUKZ.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
LPC1101LVUKZ ist geeignet für 6 Anwendungs: Compact Embedded Control Module, Small Sensor Hub, Industrial Status Controller, Low-Cost Consumer Accessory, Simple Motor or Relay Control, Embedded Educational Platform.
Compact Embedded Control Module
The LPC1101LVUKZ fits compact embedded controllers that need a 32-bit processing core, up to 50 MHz operation, and 32 KB flash without using a larger package. It can manage basic sequencing, local logic, and external control functions while preserving board area in a 25-UFBGA WLCSP outline. The design should confirm I/O availability, timing, and peripherals in the NXP datasheet before assigning the controller.
Empfohlen
Small Sensor Hub
The LPC1101LVUKZ can serve as the local controller in a small sensor hub when the application requires a low-footprint MCU and modest code storage. Its 32 KB flash provides a defined program-memory budget, while the 50 MHz maximum CPU frequency supports responsive polling and control logic. Confirm the required sensor interfaces, ADC resources, voltage levels, and pin count in the exact device documentation.
Empfohlen
Industrial Status Controller
For a compact industrial status controller, the LPC1101LVUKZ provides a 32-bit Arm Cortex-M0+/M0-family processing platform at up to 50 MHz with 32 KB flash. It is appropriate for supervisory logic, local state machines, and simple equipment-control functions when the exact peripheral and electrical requirements are within the LPC1101LV device limits. Industrial qualification and environmental ranges are not established by the supplied data.
Empfohlen
Low-Cost Consumer Accessory
The LPC1101LVUKZ is suitable for low-cost consumer accessories when the product needs a small MCU package, modest flash, and straightforward embedded logic. Its 25-UFBGA WLCSP construction can help reduce PCB footprint, while the 50 MHz class CPU supports responsive button, indicator, or state-management functions. Validate USB, communications, analog, and security requirements separately because those resources are not specified in the verified listings.
Empfohlen
Simple Motor or Relay Control
LPC1101LVUKZ can be evaluated for small motor or relay-control boards when its timer outputs, GPIO count, voltage limits, and drive requirements meet the application. The 50 MHz maximum operating frequency gives the firmware headroom for state management, while 32 KB flash constrains code and table storage. Use external driver transistors or interface circuits as required and verify timing and electrical limits from the manufacturer documentation.
Empfohlen
Embedded Educational Platform
The LPC1101LVUKZ is appropriate for an educational embedded platform when the objective is to teach 32-bit Arm microcontroller development in a compact package. It provides a stated 50 MHz maximum frequency and 32 KB flash for introductory firmware, while the WLCSP format introduces real fine-pitch layout challenges. For training boards, verify the package escape layout, debugger connection, supply design, and available peripheral examples before committing to a layout.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LPC1101LVUKZ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LPC1101LVUKZ-ND |
|---|---|---|
| Manufacturer | NXP Semiconductors | NXP Semiconductors |
| Package | 25-UFBGA WLCSP | 25-UFBGA WLCSP |
| CPU Core | Arm Cortex-M0+/M0 | Arm Cortex-M0+/M0 family |
| Maximum CPU Frequency | 50 MHz | 50 MHz |
| Flash Memory | 32 KB | 32 KB |
| Memory Organization | 32K x 8 bits | 32K x 8 bits |
| Architecture | 32-bit | 32-bit |
| Application Class | Scalable entry-level MCU | Scalable entry-level MCU |
Wichtigste Unterscheidungsmerkmale
- Compact 25-UFBGA WLCSP form factor (vs. LPC1101LVUKZ-ND)
- 32 KB flash allocation (vs. LPC1101LVUKZ-ND)
- 50 MHz maximum operating class (vs. LPC1101LVUKZ-ND)
- Entry-level Arm microcontroller positioning (vs. LPC1101LVUKZ-ND)
Designhinweise
The 25-UFBGA WLCSP package requires a fine-pitch land pattern and disciplined escape routing. Use the exact NXP package drawing for ball locations and verify the PCB design rules for the selected fabrication and assembly process. Keep power and ground connections short, provide low-impedance return paths, and do not infer ball spacing from a generic WLCSP library because the verified data does not provide package dimensions.
The verified snippets establish the MCU identity, 50 MHz maximum frequency, 32 KB flash, and 25-UFBGA WLCSP package, but they do not provide the complete pinout or electrical limits. Before schematic capture, download the current NXP LPC1100LV datasheet and verify power, ground, reset, clock, programming, and I/O assignments. Treat the search-result snippets as discovery data rather than a substitute for the manufacturer package and electrical documentation.
Confirm the supported supply range, decoupling requirements, and current limits from the exact LPC1101LV datasheet before designing the power tree. Because those values are marked as data needed here, do not select capacitors or regulators based on assumptions. Validate startup behavior, external clock requirements, and debug-interface power sequencing on the final board using the manufacturer's reference information and hardware test plan.
Plan the PCB footprint, assembly stencil, and inspection strategy together. A WLCSP design can be electrically correct yet difficult to assemble if the land pattern, paste volume, solder profile, or inspection method is not validated. Obtain the current manufacturer package drawing, confirm the ordering-code package suffix, and prototype the board before committing to volume production.
Compliance-Informationen
The supplied search results do not provide verified environmental or material compliance declarations for LPC1101LVUKZ. Obtain current NXP product documentation or an authorized distributor declaration before making a compliance determination.
