NXP Semiconductors

LPC43S57JBD208E - Dual-Core 204 MHz MCU | NXP

Teilenummer: LPC43S57JBD208E ✓ Aktiv
208-lead LQFP, 28 mm x 28 mm Package 204 MHz Speed 1 MB Memory
MOQ: 1 |

LPC43S57JBD208E Übersicht

The NXP LPC43S57JBD208E is a 32-bit dual-core Arm Cortex-M4/M0 microcontroller with up to 204 MHz performance, 1 MB of embedded flash, 136 kB of on-chip SRAM, and 16 kB of EEPROM in a 208-lead LQFP package. The primary Cortex-M4 core handles demanding control tasks while the energy-efficient Cortex-M0 coprocessor provides code- and tool-compatible execution for supporting workloads.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The LPC43S57 belongs to the embedded-controller hierarchy: Arm Cortex-M processor > 32-bit microcontroller > embedded processing system. Its dual-core architecture allows software to partition real-time control, communications, and monitoring functions, reducing the need for separate discrete processors when workload isolation is valuable.

The LPC43S57JBD208E combines 1 MB of flash with 136 kB of SRAM and 16 kB of EEPROM. Its security hardware includes an AES engine, while its communications and storage interfaces include Ethernet, two USB interfaces, and a quad-SPI Flash Interface, or SPIFI. The State Configurable Timer provides configurable timing functions, and SGPIO supports flexible serial GPIO operation for compact industrial and control designs.

Both Arm Cortex-M4 and Cortex-M0 cores use the Arm architecture and support the same core architecture in this device family. The M4 core is intended for higher-performance application processing, whereas the M0 coprocessor offers lower code density and energy efficiency for peripheral control, diagnostics, or background tasks. Running independent code on the two cores can improve partitioning, although developers must coordinate shared peripherals and memory carefully.

Typical uses include industrial automation controllers, Ethernet-connected equipment, secure embedded gateways, motor and motion-control systems, building automation nodes, and data-acquisition equipment. The 208-LQFP package provides many external I/O options and is appropriate for multilayer boards requiring broad peripheral connectivity, high-voltage-adjacent isolation spacing, or serviceable leaded packages.

PCB design should follow NXP's package pinout, power-supply, decoupling, and high-speed-layout guidance. Place decoupling capacitors close to the appropriate supply pins, provide clean power for both processor domains, route sensitive communications away from fast-switching nets, and confirm every alternate function before finalizing the 208-pin layout. Firmware must also enable clocks, pin multiplexing, and peripheral instances in the intended order during startup.

This product page combines the manufacturer's architectural and memory details with package, interface, sourcing, and replacement guidance. It also distinguishes the closest same-package candidates by device family and suffix, helping engineers assess PCB compatibility before committing to a redesign or firmware migration.

Drop-in-Alternativen für LPC43S57JBD208E – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LPC43S57JBD208E (gleiche Bauform und Footprint) – abweichend in Ethernet, Package, Product Type, Security Engine, Supply Voltage.

NXP Semiconductors
Ethernet: Supported
Package: 208-pin LQFP
Product Type: 32-bit Arm Cortex-M4/M0 microcontroller
Vergleichen mit LPC43S57JBD208E →
NXP Semiconductors
Ethernet: 10/100 MAC included
Package: 208-LQFP (28x28 mm)
Supply Voltage: 3.3 V (typical)
Vergleichen mit LPC43S57JBD208E →
NXP Semiconductors
Product Type: 32-bit dual-core microcontroller IC
Security Engine: Integrated AES engine
Vergleichen mit LPC43S57JBD208E →

LPC43S57JBD208

✅ Drop-In
NXP Semiconductors
📦 208-lead LQFP (28 mm x 28 mm)
32-bit dual-core microcontroller IC · NXP Semiconductors · 204 MHz · Arm Cortex-M4, 32-bit · Arm Cortex-M0 coprocessor · 1 MB flash · 136 kB SRAM · 16 kB EEPROM

Preis auf Anfrage

Datenblatt ansehen →

LPC4357JBD208E

✅ Drop-In
NXP Semiconductors
📦 208-lead LQFP (28 mm x 28 mm)
32-bit Arm Cortex-M4/M0 microcontroller · Arm Cortex-M4 · Arm Cortex-M0 · 1 MB · 136 kB · 16 kB · 3.3 V · 208-pin LQFP

Preis auf Anfrage

Datenblatt ansehen →

LPC4357JBD208K

✅ Drop-In
NXP Semiconductors
📦 208-lead LQFP (28 mm x 28 mm)
ARM Cortex-M4 (with FPU) + Cortex-M0 coprocessor · 32-bit · 2 (dual-core asymmetric) · 204 MHz · 1 MB (1M x 8) · 136 kB · 16 kB · 3.3 V (typical)

Preis auf Anfrage

Datenblatt ansehen →

LPC43S57JBD208E Grenzwerte & elektrische Eigenschaften

Product Type 32-bit dual-core microcontroller
Primary Core Arm Cortex-M4
Coprocessor Core Arm Cortex-M0
Maximum Core Frequency 204 MHz
Instruction Set 32-bit Arm
Embedded Flash 1 MB
Flash Organization 1M x 8 bits
On-Chip SRAM 136 kB
EEPROM 16 kB
Security Engine AES
External Flash Interface Quad SPI Flash Interface (SPIFI)
Ethernet 1 Ethernet interface
USB Interfaces 2 USB interfaces
Timer State Configurable Timer (SCT)
Serial GPIO Serial General Purpose I/O (SGPIO)
Gehäuse 208-lead LQFP, 28 mm x 28 mm
Montageart Surface mount
Core Cross-Compatibility Cortex-M0 coprocessor is code- and tool-compatible with the Cortex-M4 core

LPC43S57JBD208E 208-lead lqfp, 28 mm x 28 mm Pinbelegungsleitfaden

Pinbelegung für LPC43S57JBD208E (208-lead lqfp, 28 mm x 28 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für LPC43S57JBD208E im 208-lead lqfp, 28 mm x 28 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LPC43S57JBD208E.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LPC43S57JBD208E ist geeignet für 6 Anwendungs: Industrial Automation Controller, Ethernet-Connected Equipment Gateway, Secure Embedded Access Terminal, Motor and Motion Control System, Data Acquisition and Monitoring Node, Building Automation Controller.

🏭

Industrial Automation Controller

The LPC43S57JBD208E fits industrial automation controllers that combine deterministic control with network connectivity. Its 204 MHz Cortex-M4 core can execute motion, sequencing, or process-control logic, while the Cortex-M0 coprocessor can handle diagnostics or background monitoring. The 136 kB SRAM supports working data and protocol buffers, and the 1 MB flash stores application code. Ethernet, two USB interfaces, the State Configurable Timer, and 208 external leads provide broad connectivity for sensors, actuators, and service interfaces. Designers should partition real-time tasks carefully and verify industrial temperature and qualification requirements for the finished controller.

🌐

Ethernet-Connected Equipment Gateway

The LPC43S57JBD208E is appropriate for an embedded gateway that must manage local control and network communication without relying on an external application processor. The Cortex-M4 core can handle protocol processing at up to 204 MHz, while the M0 coprocessor can service monitoring tasks or maintain time-critical peripheral operations. Its 1 MB internal flash, 136 kB SRAM, and 16 kB EEPROM provide resources for firmware, protocol state, and configuration data. Ethernet and USB support multiple external connectivity paths, while AES hardware accelerates selected cryptographic workloads. Final design validation should include bootloader behavior, security requirements, and sustained communication-load timing.

🔒

Secure Embedded Access Terminal

The LPC43S57JBD208E supports secure embedded access terminals that combine local user-interface control, communications, and protected data handling. Its AES engine provides hardware support for cryptographic operations, while the separate Cortex-M0 core can isolate monitoring or low-power service tasks from the main Cortex-M4 workload. With 1 MB of flash and 16 kB of EEPROM, the device can retain firmware, keys, and configuration according to the product's security architecture. Ethernet, USB, and SGPIO expand the peripheral options available to access-control hardware. Engineers should define key storage, tamper response, update procedures, and privilege boundaries before using the cryptographic engine in a deployed product.

⚡

Motor and Motion Control System

The LPC43S57JBD208E is suitable for motor and motion-control systems requiring a combination of real-time computation and flexible I/O. The 204 MHz Cortex-M4 core can execute control algorithms, and the State Configurable Timer can support timing functions associated with motor control. The Cortex-M0 coprocessor can perform auxiliary monitoring without displacing the primary control task. Its 136 kB SRAM provides substantial working memory, while the 208-lead LQFP exposes the mixed-signal, timer, communication, and general-purpose signals needed by complex control boards. Power integrity, analog reference routing, PWM timing, and thermal performance should be validated at the system level.

🖥️

Data Acquisition and Monitoring Node

The LPC43S57JBD208E fits a local data-acquisition node that must sample sensors, manage buffered data, and transmit results over an industrial network. Its 1 MB flash stores firmware and nonvolatile configuration, while 136 kB of SRAM supports acquisition buffers and communication state. The Cortex-M4 core can process measurements at up to 204 MHz, and the Cortex-M0 core can maintain sampling cadence or service a watchdog. Ethernet, USB, SPIFI, SGPIO, and the State Configurable Timer broaden the available acquisition and connectivity options. Designers should establish analog grounding, input-protection, sampling-trigger, and network-update strategies before deployment.

🧩

Building Automation Controller

The LPC43S57JBD208E can serve as a building-automation controller for lighting, environmental controls, access interfaces, and networked equipment. The Cortex-M4 core handles application logic and communications, while the Cortex-M0 coprocessor can execute low-power monitoring duties. Ethernet, USB, SGPIO, and the configurable timer provide multiple options for sensor inputs, communications, and scheduled control events. The 208-lead LQFP package offers extensive I/O for equipment that requires numerous discrete signals. Firmware should implement deterministic scheduling, safe-state behavior during communication loss, and upgrade procedures, while the hardware design should provide reliable power regulation and protection for long field-installed wiring.

What is the LPC43S57JBD208E?
The LPC43S57JBD208E is a 32-bit dual-core microcontroller from NXP based on an Arm Cortex-M4 primary core and an Arm Cortex-M0 coprocessor. According to the NXP product information, it operates up to 204 MHz and integrates 1 MB of flash, 136 kB of SRAM, and 16 kB of EEPROM. The device is supplied in a 208-lead LQFP package measuring 28 mm by 28 mm.
What are the key specifications of LPC43S57JBD208E that engineers should know?
The LPC43S57JBD208E combines a 204 MHz Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, 1 MB of flash, 136 kB of SRAM, and 16 kB of EEPROM in a 208-lead LQFP package. NXP also identifies Ethernet, two USB interfaces, an AES engine, a quad-SPI Flash Interface, the State Configurable Timer, and SGPIO. These resources support connected, secure, and real-time embedded control designs.
How much memory does the LPC43S57JBD208E have?
The LPC43S57JBD208E has 1 MB of embedded flash, 136 kB of on-chip SRAM, and 16 kB of EEPROM. The distributor product listing identifies the flash organization as 1M x 8 bits. According to the NXP product page, the 1 MB flash supports firmware and data storage, while the SRAM provides fast working memory for real-time control and communications tasks.
What is the difference between the Cortex-M4 core and Cortex-M0 coprocessor in the LPC43S57JBD208E?
The Cortex-M4 core is the primary high-performance processor, while the Cortex-M0 coprocessor provides energy-efficient execution for supporting tasks. NXP describes the M0 core as a 32-bit processor with a simpler instruction set and reduced code size, intended to replace conventional 8-bit and 16-bit microcontroller workloads. Both cores are tool-compatible within the device family, allowing designers to partition control and background work.
Where can I download the LPC43S57JBD208E datasheet PDF?
The LPC43S57JBD208E datasheet and product information are available through NXP's official LPC43S57JBD208 product page at https://www.nxp.com/part/LPC43S57JBD208. Use the manufacturer document for the authoritative 208-lead LQFP pin list, electrical limits, clock requirements, memory map, and recommended application circuit. Search the page for the device's datasheet and user manual links.
Where can I find the LPC43S57JBD208E pinout and package information?
The LPC43S57JBD208E uses a 208-lead LQFP package measuring 28 mm by 28 mm. The authoritative pin names, alternate functions, exposed pad details, and recommended PCB layout are published in the NXP datasheet and the LPC43S57JBD208 product page. Assign every signal from the manufacturer's pin-description table rather than inferring functions from an LQFP drawing of another device.
Is the LPC43S57JBD208E suitable for industrial and communications equipment?
Yes, the LPC43S57JBD208E is suitable for connected industrial and communications equipment requiring substantial local processing. Its 204 MHz Cortex-M4 core, 136 kB of SRAM, Ethernet, two USB interfaces, AES engine, SPIFI, and configurable timers support gateways, controllers, data-acquisition nodes, and secure embedded systems. Validate the exact operating-temperature and industrial-qualification requirements for the finished equipment.
What can replace the LPC43S57JBD208E on the same 208-LQFP PCB?
The closest documented candidates use the same 208-lead LQFP outline, but replacement must be treated as an engineering qualification rather than a blind substitution. LPC43S57JBD208 is the base ordering variant, while the LPC4357JBD208E and LPC4357JBD208K relationship is documented as silicon-compatible in NXP community information. Confirm pin mapping, memory, clock limits, peripherals, boot behavior, and firmware before choosing any alternative.
Is the LPC43S57JBD208E the same as LPC4357JBD208E?
The LPC4357JBD208E and LPC4357JBD208K are documented as mutually replaceable because their silicon is the same. The LPC43S57JBD208E belongs to the broader LPC43S57 family and has a separately identified 1 MB flash, 136 kB SRAM, and 16 kB EEPROM configuration. A PCB-level fit does not by itself establish software or peripheral equivalence with the LPC4357 family.
LPC43S57JBD208E vs LPC43S57JBD208 - which should I select?
LPC43S57JBD208E is the target ordering code, while LPC43S57JBD208 is the base device listing published by NXP. The available information identifies the same 208-LQFP construction and 1 MB flash configuration for the family. Before substituting one ordering code for the other, verify the E suffix's temperature-grade, qualification, and ordering-code meaning against the current NXP datasheet and part-status records.
When should I choose LPC43S57JBD208E over another 204 MHz dual-core MCU?
Choose the LPC43S57JBD208E when a design needs the combination of an Arm Cortex-M4 core, an Arm Cortex-M0 coprocessor, 1 MB flash, 136 kB SRAM, Ethernet, dual USB, AES hardware, SPIFI, and a 208-lead LQFP footprint. It is particularly useful when workload partitioning or broad I/O connectivity justifies the large package. Choose a smaller MCU when those interfaces and memory resources are unnecessary.
Does the LPC43S57JBD208E support external flash storage?
Yes, the LPC43S57JBD208E includes a quad-SPI Flash Interface, commonly identified as SPIFI. This interface allows external serial flash to complement the device's 1 MB internal flash and 16 kB EEPROM. Board designs should follow NXP's recommended SPIFI routing and signal-integrity guidance, especially when using high-speed quad-SPI devices or long PCB traces.
How much power does the LPC43S57JBD208E consume?
Power consumption depends on active core, clock configuration, peripheral use, I/O activity, voltage, and operating temperature, so one fixed consumption figure does not describe every operating mode. Consult the current NXP datasheet for core and I/O supply currents, clock-dependent behavior, sleep modes, and thermal limits. The dual-core architecture should be evaluated for code partitioning rather than assumed to reduce total power automatically.
Where can I buy the LPC43S57JBD208E and check current availability?
Use the Request a Quote form on this page to request current LPC43S57JBD208E availability, quantity breaks, and lead time for the exact ordering code. The manufacturer and distributor listings confirm that LPC43S57JBD208E is a cataloged 208-LQFP microcontroller, but inventory and commercial terms can change. Provide the target quantity, packaging preference, and required delivery date with the request.
What is the lead time for LPC43S57JBD208E?
The current lead time for LPC43S57JBD208E should be confirmed through the Request a Quote form on this page. Lead time depends on factory inventory, order volume, scheduled allocations, and the selected delivery package. NXP's product page identifies the base LPC43S57JBD208 device, while the exact E-suffix ordering code should be confirmed during quotation and order review.
What is the price of LPC43S57JBD208E?
The current commercial price for LPC43S57JBD208E should be obtained through the Request a Quote form on this page. The form allows quantity-specific pricing to be returned for the exact 208-lead LQFP ordering code and required delivery schedule. Pricing can vary with order volume, inventory position, and packaging requirements, so a quantity-specific quotation is more useful than a generic catalog figure.

Technische Referenzdaten für LPC43S57JBD208E – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LPC43S57JBD208E when the design needs a 204 MHz Arm Cortex-M4 core, a separate Cortex-M0 coprocessor, 1 MB flash, 136 kB SRAM, 16 kB EEPROM, Ethernet, dual USB, AES hardware, SPIFI, and a 208-lead LQFP footprint. Its processing split can be valuable in industrial controllers, gateways, secure terminals, and data-acquisition nodes that benefit from independent real-time and background workloads. LPC43S57JBD208 is the closest base ordering code when its temperature and qualification suffix meet the design requirements. Consider LPC4357JBD208E or LPC4357JBD208K only after comparing the complete LPC43S57 and LPC4357 register, pin-multiplex, peripheral, memory, bootloader, and firmware differences. The physical package match enables a PCB-level candidate, but it does not eliminate application-level qualification. For new compact designs, also evaluate whether a smaller package with fewer communications interfaces could reduce board area and system cost.

Vergleich mit Alternativen

Parameter Dieses Produkt LPC43S57JBD208 LPC4357JBD208E LPC4357JBD208K
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 208-lead LQFP (28 mm x 28 mm) 208-lead LQFP (28 mm x 28 mm) 208-lead LQFP (28 mm x 28 mm) 208-lead LQFP (28 mm x 28 mm)
Product Type 32-bit dual-core microcontroller 32-bit dual-core microcontroller 32-bit Arm microcontroller 32-bit Arm microcontroller
Primary Processor Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4

Wichtigste Unterscheidungsmerkmale

  • Identified Cortex-M4 and Cortex-M0 processing resources (vs. LPC43S57JBD208)
  • Complete family connectivity and storage resources (vs. LPC4357JBD208E)
  • Target-specific ordering and qualification selection (vs. LPC4357JBD208K)

Designhinweise

The 208-lead LQFP footprint requires exact pad and paste-land geometry from the NXP package drawing. Assign all 208 signals from the manufacturer pin table, verify every muxed function, and preserve the exposed thermal and ground connections specified for the package. Place all required decoupling capacitors at their associated supply pins and route each return path continuously to reduce supply-impedance noise across the Cortex-M4 and Cortex-M0 domains.

Treat Ethernet, USB, and SPIFI as controlled-impedance interfaces rather than ordinary low-speed GPIO nets. Follow NXP's reference layouts for trace lengths, differential impedance, return paths, connector placement, and isolation from switching nodes. In particular, keep the SPIFI clock and data routing short and continuous, provide a continuous reference plane, and avoid routing sensitive signals beneath noisy power stages or across discontinuous plane splits.

Do not assume that fitting a 208-LQFP footprint proves drop-in compatibility. LPC43S57 and LPC4357 devices can differ in clock limits, memory resources, peripheral instances, bootloader behavior, pin multiplexing, and software support. Before substitution, compare the complete NXP pin tables, register definitions, memory map, startup code, security configuration, and board-level power requirements, then perform hardware and firmware regression tests.

Plan the power tree for the processor, I/O, and any external analog or transceiver supplies independently. Check voltage tolerances and sequencing requirements against the current NXP datasheet, and use local bulk capacitance where required for load transients. The exact capacitor values and stability requirements should follow the datasheet's application circuit and power-supply recommendations rather than a generic bulk-capacitor rule.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No specific compliance declaration for LPC43S57JBD208E was identified in the cited manufacturer and distributor pages. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification status from the current NXP product documentation before procurement.

Ähnliche Suchanfragen

LPC43S57JBD208E datasheet LPC43S57JBD208E datasheet pdf LPC43S57JBD208E pinout LPC43S57JBD208E equivalent LPC43S57JBD208E replacement LPC43S57JBD208E cross reference LPC43S57JBD208E price LPC43S57JBD208E stock NXP LPC43S57JBD208E LPC43S57JBD208 208 LQFP LPC43S57JBD208E vs LPC4357JBD208E LPC43S57 dual core microcontroller LPC43S57 Ethernet USB SPIFI LPC43S57JBD208E application circuit LPC43S57JBD208E footprint

Verwandte Bauteile & Begriffe

NXP Semiconductors LPC43S57JBD208E LPC43S57JBD208 LPC4357JBD208E LPC4357JBD208K Arm Cortex-M4 Arm Cortex-M0 Arm Cortex-M processor 32-bit microcontroller embedded controller dual-core architecture 1 MB embedded flash 136 kB SRAM 16 kB EEPROM AES engine Quad SPI Flash Interface SPIFI State Configurable Timer SCT Serial General Purpose I/O SGPIO Ethernet USB 208-lead LQFP LQFP package family
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen