LTC2309CF - 8-Ch 12-Bit SAR ADC I2C 20-TSSOP | Analog Devices
Teilenummer: LTC2309CF ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $10.42 | $10,42 |
| 10 | $9.38 | $93,80 |
| 100 | $7.81 | $781,00 |
| 500 | $6.95 | $3.475,00 |
| 1.000 | $5.99 | $5.990,00 |
LTC2309CF Übersicht
A SAR ADC (successive-approximation-register analog-to-digital converter) is a class of ADC that performs a binary search through successive bit trials to converge on the input voltage, combining the compact form factor and low power of a sigma-delta with the speed and deterministic latency of a flash converter. SAR ADCs sit within the broader hierarchy of data converters (ADC -> data converter -> signal chain IC -> semiconductor), and are preferred when applications demand accurate, single-shot conversions of multi-channel analog inputs at moderate sample rates.
Key features of the LTC2309CF include 73 dB SINAD and 73 dB common-mode rejection at the analog inputs, an I2C-compatible 2-wire serial interface with hardware-address pins that allow up to nine devices on one bus, an automatic channel sequencer, and a power-down mode that drops supply current to under 1 microampere between conversions. Internal calibration circuitry and an integrated 2.5V reference with low 10ppm/C drift ensure stable conversion accuracy across temperature. The 20-pin TSSOP package measures 6.5 mm x 4.4 mm x 1.0 mm, making it suitable for space-constrained industrial and instrumentation boards. The part carries the CF suffix, which denotes the 20-pin TSSOP package (the alternate LTC2309CUF denotes a 24-pin QFN package).
Typical applications include industrial process control and multi-channel data acquisition, portable and battery-powered instrumentation, programmable logic controller (PLC) analog input modules, and medical instrumentation such as patient monitoring front-ends. The integrated sequencer and I2C interface keep microcontroller pin count and firmware overhead minimal.
When designing with the LTC2309CF, ensure the input signal does not exceed the supply rails and add an external anti-aliasing RC filter on each analog input to limit out-of-band noise. The I2C address pins allow multi-slave addressing on a shared bus, and the power-down mode should be invoked during idle intervals to maximize battery life in portable designs.
Drop-in-Alternativen für LTC2309CF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit LTC2309CF (gleiche Bauform und Footprint) – abweichend in Architecture, Conversion Time, Input Type, Internal Reference, Number of Channels.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
LTC2309CF#PBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LTC2309IF#PBF
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
LTC2309CF Grenzwerte & elektrische Eigenschaften
| Auflösung | 12 bits |
| Number of Channels | 8 single-ended / 4 differential |
| Architecture | SAR (Successive Approximation Register) |
| Conversion Time | 1.3 us (typical) |
| Schnittstelle | I2C-compatible 2-wire serial |
| Input Type | Single-ended or differential |
| Internal Reference | 2.5 V (10 ppm/C drift) |
| External Reference Input | Yes |
| Versorgungsspannung | 5 V (single supply) |
| Analog Input Range | 0 V to VREF (unipolar) |
| SINAD | 73 dB |
| Power-Down Current | < 1 uA |
| Betriebstemperatur | 0C to +70C (C grade) |
| Gehäuse | 20-pin TSSOP (CF) |
| Montageart | Surface Mount |
| MSL-Level | 1 |
| Lead-Free | Yes (#PBF suffix) |
LTC2309CF Pin-Konfiguration
| Pin 1 | CH0 — Analog input channel 0 |
| Pin 2 | CH1 — Analog input channel 1 |
| Pin 3 | CH2 — Analog input channel 2 |
| Pin 4 | CH3 — Analog input channel 3 |
| Pin 5 | CH4 — Analog input channel 4 |
| Pin 6 | CH5 — Analog input channel 5 |
| Pin 7 | CH6 — Analog input channel 6 |
| Pin 8 | CH7 — Analog input channel 7 |
| Pin 9 | GND — Ground |
| Pin 10 | REF — Reference input / output (2.5V internal) |
| Pin 11 | REFCOMP — Reference bypass capacitor |
| Pin 12 | AD0 — I2C address select bit 0 |
| Pin 13 | AD1 — I2C address select bit 1 |
| Pin 14 | SDA — I2C serial data |
| Pin 15 | SCL — I2C serial clock |
| Pin 16 | NC — Not connected |
| Pin 17 | NC — Not connected |
| Pin 18 | NC — Not connected |
| Pin 19 | VCC — +5V supply |
| Pin 20 | GND — Ground |
Typische Anwendungen
LTC2309CF ist geeignet für 6 Anwendungs: Industrial Process Control / PLC Analog Input Modules, Portable / Battery-Powered Multi-Channel Instrumentation, Medical Instrumentation and Patient Monitoring Front-Ends, Data Acquisition Systems and DAQ Cards, Automotive Sensor Interface Modules, Test & Measurement Equipment and Bench Instruments.
Industrial Process Control / PLC Analog Input Modules
The LTC2309CF fits industrial process control and PLC analog input modules because it provides 8 single-ended or 4 differential 12-bit SAR conversion channels on a single I2C bus, eliminating per-channel signal chains. Its integrated 2.5V reference and 73 dB SINAD ensure accurate digitization of 0-10V or 4-20 mA-derived signals through scaling resistors. Placed on the PLC backplane I2C bus, it shares wiring with other Analog Devices slaves via hardware address pins AD0/AD1. The 1.3 us conversion time supports polling rates above 10 ksps per channel aggregate, while the <1 uA power-down current aids thermally-constrained control cabinets. Compared with discrete ADCs per input, the LTC2309CF reduces BOM count and PCB area by roughly 60 percent.
Empfohlen
Portable / Battery-Powered Multi-Channel Instrumentation
The LTC2309CF suits portable, battery-powered multi-channel instrumentation due to its 1.3 us SAR conversion, integrated 2.5V reference, and <1 uA power-down current. It draws only milliamps during conversion and idles at less than 1 microampere between samples, extending battery life by 5-10x compared to discrete ADCs in handheld multimeters, environmental loggers, and field data recorders. Its I2C interface allows direct connection to low-power microcontrollers such as the MAX32660 or STM32L0 with no additional glue. The TSSOP-20 footprint is hand-solderable for low-volume prototypes. The integrated sequencer removes firmware overhead, enabling deterministic multi-channel scans at sub-millisecond intervals for vibration, strain gauge, or thermocouple arrays.
Empfohlen
Medical Instrumentation and Patient Monitoring Front-Ends
The LTC2309CF suits medical instrumentation front-ends where 12-bit resolution across multiple biopotential or sensor channels is required. Its 73 dB SINAD preserves ECG, EEG, or pulse-oximetry signal fidelity, while the integrated 2.5V reference ensures calibration stability across patient sessions. The I2C bus enables a compact interface to medical-grade microcontrollers, while its <1 uA power-down current prolongs battery runtime in ambulatory devices. The differential sample-and-hold rejects 50/60 Hz mains common-mode interference when paired with right-leg-drive circuits. According to the LTC2309 datasheet, the part is not formally medical-qualified; system-level IEC 60601-1 compliance must be validated at the board level.
Empfohlen
Data Acquisition Systems and DAQ Cards
The LTC2309CF fits general-purpose data acquisition (DAQ) cards and modules, particularly PC-based or embedded DAQ systems with multiple analog input channels. Its I2C interface allows simple USB-to-I2C bridge connectivity, while 8 channels of 12-bit resolution cover most general-purpose measurement tasks. The 1.3 us conversion time supports aggregate sample rates above 100 ksps across all channels when sequenced. The integrated sequencer and address pins allow multiple LTC2309CF devices on one bus, scaling to 16, 24, or more channels without firmware changes. The TSSOP-20 package is convenient for stackable DAQ daughterboards.
Empfohlen
Automotive Sensor Interface Modules
The LTC2309CF fits non-safety automotive sensor interface modules such as body controllers, HVAC sensors, and battery management telemetry, where 12-bit resolution across 8 channels is sufficient. Its I2C interface reduces wiring harness complexity compared with SPI or analog point-to-point links. The integrated 2.5V reference and differential inputs handle 0-5V ratiometric and bridge sensor signals directly. For AEC-Q100-qualified automotive deployments, the I-grade (-40C to +85C) variant LTC2309IF#PBF in the same TSSOP-20 footprint is preferred. The <1 uA quiescent current aids always-on battery-powered modules such as remote keyless entry receivers.
Empfohlen
Test & Measurement Equipment and Bench Instruments
The LTC2309CF fits bench-top test and measurement equipment where moderate-speed multi-channel data acquisition is needed. Its 1.3 us SAR conversion and 73 dB SINAD deliver adequate accuracy for bench DMMs, signal loggers, and educational lab instrumentation. The I2C interface simplifies connection to ARM Cortex-M or FPGA-based controllers, while the integrated reference eliminates a separate reference IC. Multiple LTC2309CF devices on one I2C bus allow scalable channel counts for bench automation systems. The TSSOP-20 hand-solderable package suits prototype bench builds and small production runs of test fixtures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für LTC2309CF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | LTC2309CF#PBF | LTC2309CUF#PBF | LTC2309IF#PBF | LTC2309IUF#PBF | ADS7828E/250 |
|---|---|---|---|---|---|---|
| Package | TSSOP-20 (CF) | TSSOP-20 (CF) - same | QFN-24 (UF) - different | TSSOP-20 (IF) - same | QFN-24 (IUF) - different | TSSOP-16 - different (16 pins vs 20) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| Channels | 8 SE / 4 DIFF | 8 SE / 4 DIFF | 8 SE / 4 DIFF | 8 SE / 4 DIFF | 8 SE / 4 DIFF | 8 SE / 4 DIFF |
| Conversion Time | 1.3 us | 1.3 us | 1.3 us | 1.3 us | 1.3 us | 20 us (max) |
| Interface | I2C | I2C | I2C | I2C | I2C | I2C |
| Internal Reference | 2.5 V | 2.5 V | 2.5 V | 2.5 V | 2.5 V | External only |
| Temperature Grade | 0C to +70C (C) | 0C to +70C (C) | 0C to +70C (C) | -40C to +85C (I) | -40C to +85C (I) | -40C to +85C |
Wichtigste Unterscheidungsmerkmale
- Integrated 2.5V reference with 10 ppm/C drift (vs. ADS7828E/250)
- Fast 1.3 microsecond conversion time (vs. ADS7828E/250)
- Hardware I2C address pins for multi-slave operation (vs. MCP3208)
Designhinweise
Place a 100 nF ceramic bypass capacitor as close as possible to the VCC pin (pin 19) of the LTC2309CF, with a 10 uF tantalum or ceramic bulk capacitor on the same supply trace. Add a 10 uF capacitor on the REF/REFCOMP pin to filter internal reference noise. For multi-channel boards, separate analog (CHx, REF) and digital (SDA, SCL, AD0, AD1) ground returns and join them at a single star point near pin 9/20 ground pins. Estimated: a clean ground layout typically improves SINAD by 3-5 dB versus a noisy layout.
Do not leave the unused analog input channels floating; tie them to mid-supply (VCC/2) or ground through 10 kohm resistors to avoid crosstalk and ADC noise pickup on adjacent channels. When using differential mode, ensure both inputs are within the common-mode range (0 to VREF). Driving an analog input above VCC or below GND will cause input clamping currents; insert 100 ohm series resistors if the source may exceed the supply rails. Always include a TVS diode array (e.g., SP3010) on analog inputs exposed to external connectors for ESD protection up to +/-15 kV HBM.
Route the I2C SDA and SCL traces as a differential pair with 4.2 mm spacing or per I2C specification; add 4.7 kohm pull-up resistors to VCC for reliable operation at 100 kHz or 400 kHz bus speeds. Keep digital traces at least 4 mm away from analog input traces to avoid digital switching noise coupling into the ADC. Use a 4-layer PCB with a dedicated ground plane for best noise performance; for 2-layer boards, flood the bottom layer with ground and stitch analog/digital returns with multiple vias. Estimated: proper 4-layer layout typically improves effective resolution by 0.5-1 LSB.
Compliance-Informationen
RoHS and REACH compliant per #PBF suffix. AEC-Q100 not applicable for C-grade commercial temperature; I-grade variant available for industrial applications. Lead-free and halogen-free per Analog Devices LTC2309 datasheet family specifications.
