M2GL025-VFG256I - 27.6K Logic Cells FPGA | Microchip
Teilenummer: M2GL025-VFG256I ✓ AktivM2GL025-VFG256I Übersicht
A flash FPGA is a programmable-logic semiconductor that stores its configuration in nonvolatile flash memory. This allows the device to retain its programmed configuration without requiring a separate configuration PROM after power is removed. The M2GL025 belongs to the IGLOO2 family, a low-density FPGA series positioned between discrete logic and larger programmable devices. Its logic resources can implement control logic, interface logic, data conversion, protocol bridging, and other system functions in a single integrated circuit.
The M2GL025-VFG256I combines 27,696 logic elements with 138 I/O in the compact 256-LFBGA package. The IGLOO2 family uses flash-based configuration and is suited to designs requiring nonvolatile configuration, moderate logic density, and a relatively large I/O count. The manufacturer describes the family as useful for general-purpose functions including bridging, I/O expansion, conversion, system management, and secure connectivity. These characteristics make it appropriate for industrial control, communications, embedded equipment, and interface-intensive embedded systems.
The package suffix VFG256 identifies the 256-ball low-profile fine-pitch BGA configuration, while the final I in the ordering code denotes the industrial temperature option used by Microchip Technology. The distributor search results also identify a non-I M2GL025-VFG256 variant in the same 256-LFBGA footprint. Microchip’s IGLOO 2 FPGA and SmartFusion 2 SoC FPGA datasheet covers the electrical DC and AC specifications for the M2GL025 device family, and the IGLOO 2 packaging and pin-descriptions user guide provides package, bank, and mechanical information.
Design work should begin with the manufacturer pin-description tables and package drawings rather than generic BGA assumptions. Supply, ground, configuration, clock, and user I/O assignments must follow the exact VFG256 documentation. Decoupling, signal-integrity, and power-sequence recommendations should be taken from the IGLOO2 hardware design guidance, with PCB constraints checked against the selected ball pitch and via-in-pad requirements.
Typical applications include industrial I/O expansion, communications protocol bridging, data-format conversion, embedded system management, secure connectivity, and compact control modules. The 138-I/O count is particularly useful when a design must connect multiple external buses, sensors, actuators, or communications peripherals while keeping the programmable logic consolidated in one package.
This product record combines the exact ordering information, package identification, logic-cell count, I/O count, lifecycle indication, manufacturer documentation links, and verified engineering alternatives. It also highlights the important sourcing limitation that the M2GL025-VFG256I is an active, cataloged device but does not have a broad set of same-footprint drop-in alternatives published in the available cross-reference material.
Drop-in-Alternativen für M2GL025-VFG256I – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit M2GL025-VFG256I (gleiche Bauform und Footprint) – abweichend in Device Type, Logic Elements, Package, Mounting Type, Configuration Memory.
M2GL025-VFG256
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →M2GL025-VFG256I Grenzwerte & elektrische Eigenschaften
| Device Type | IGLOO2 low-density flash FPGA |
| Logic Elements | 27,696 logic elements |
| User I/O Count | 138 I/O |
| Configuration Memory | Embedded flash configuration |
| Gehäuse | 256-LFBGA |
| Package Pin or Ball Count | 256 balls |
| Core Supply Voltage | 1.2 V |
| Temperature Grade | Industrial grade |
| Montageart | Surface mount |
| Manufacturer Lifecycle Status | In Production |
| Shipping Format | Tray |
| Programmable Logic Type | Field-programmable gate array |
| Configuration Technology | Nonvolatile flash |
| Product Family | IGLOO2 |
| FPGA Density Class | Low density |
M2GL025-VFG256I 256 balls Pinbelegungsleitfaden
Pinbelegung für M2GL025-VFG256I (256 balls-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für M2GL025-VFG256I.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
M2GL025-VFG256I ist geeignet für 6 Anwendungs: Industrial I/O Expansion, Communications Protocol Bridging, Data Format Conversion, Embedded System Management, Secure Connectivity Gateways, Compact Test and Control Modules.
Industrial I/O Expansion
The M2GL025-VFG256I fits industrial I/O-expansion boards because its 138 user I/O can connect several sensors, actuators, discrete lines, and external buses through one programmable fabric. The 27,696 logic elements provide enough capacity for control, debouncing, isolation logic, status monitoring, and protocol handling without requiring a larger FPGA. Its embedded flash configuration allows the controller to restart with the same logic after power is removed. In a design, assign the required voltage-tolerant pins and banks using the VFG256 pin-description guide, then place the device within the system’s expected industrial temperature envelope.
Empfohlen
Communications Protocol Bridging
The M2GL025-VFG256I is useful in communications gateways that translate between serial, parallel, or proprietary interfaces. Its 27,696 logic elements can accommodate framing logic, byte conversion, buffering, and protocol state machines, while 138 I/O reduce the need for separate interface ICs. The flash-based IGLOO2 architecture retains configuration across power cycles, allowing field-deployed equipment to resume the same bridging function immediately. Engineers should use the exact bank and pin rules from Microchip’s package guide because voltage standards and dedicated pins may constrain valid interface combinations.
Empfohlen
Data Format Conversion
The M2GL025-VFG256I can consolidate parallel-to-serial conversion, serial-to-parallel transformation, bit-width adjustment, and endianness control in one programmable device. Its 27,696 logic elements are suitable for fixed-width conversion pipelines, while the 138-I/O count supports parallel buses and control signals that would otherwise require several glue-logic ICs. Embedded flash makes the conversion behavior deterministic after restart, which benefits production testers and fixed industrial subsystems. For high-speed interfaces, validate timing, drive strength, and I/O-standard support against the official datasheet rather than relying only on package compatibility.
Empfohlen
Embedded System Management
The M2GL025-VFG256I fits supervisory and system-management logic that must monitor reset conditions, sequencing, fault flags, and peripheral status. The 27,696 logic elements can implement control state machines and condition logging around a host processor, while embedded flash retains the configuration and supports consistent startup behavior. Its 138 I/O allow the manager to connect multiple reset, interrupt, power-status, and watchdog signals without extensive multiplexing. System designers should pair the FPGA with a dedicated processor and use the manufacturer’s power-sequencing guidance to avoid incompatible ramp or control states.
Empfohlen
Secure Connectivity Gateways
The M2GL025-VFG256I is applicable to secure-connectivity gateways that combine protocol conversion, device authentication coordination, key-control interfaces, and communication routing. Its programmable logic allows security-related behavior to be adapted without changing the PCB, and its nonvolatile configuration supports rapid restoration of established gateway functions. The 138 I/O can connect multiple network and control interfaces, although the selected IGLOO2 device does not by itself establish a security certification. Designers should review the relevant Microchip device security guidance and implement the required key lifecycle, update, and tamper-control architecture at the system level.
Empfohlen
Compact Test and Control Modules
The M2GL025-VFG256I can serve as the central programmable controller in compact test, measurement, and automated-control modules. The 27,696 logic elements support sequencing, pattern generation, acquisition control, and fixture management, while 138 I/O provide connections to sensors, relays, and external test equipment. Because the configuration resides in flash, a module can recover its programmed test sequence without an external loader. Engineers should budget BGA assembly, via access, test-point access, and signal-integrity margin early in the PCB layout to preserve reliable operation at the required edge rates.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für M2GL025-VFG256I – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | M2GL025-VFG256 |
|---|---|---|
| Package | 256-LFBGA | 256-LFBGA |
| Brand | Microchip Technology | Microchip Technology |
| Product Family | IGLOO2 | IGLOO2 |
| Logic Elements | 27,696 logic elements | 27,696 logic elements |
| User I/O | 138 I/O | 138 I/O |
| Core Supply | 1.2 V | 1.2 V |
| Temperature Ordering Option | Industrial I suffix | Non-I suffix |
| Configuration Technology | Embedded flash | Embedded flash |
| Manufacturer Lifecycle Status | M2GL025 family listed In Production | M2GL025 family listed In Production |
Wichtigste Unterscheidungsmerkmale
- Explicit industrial temperature ordering option (vs. M2GL025-VFG256)
- High I/O density in a 256-LFBGA package (vs. M2GL025-VFG256)
- Nonvolatile configuration for restart-ready systems (vs. M2GL025-VFG256)
Designhinweise
Base the VFG256 footprint on Microchip’s exact package drawing and ball map rather than a generic 256-ball BGA. Confirm ball pitch, pad dimensions, solder-mask definition, paste apertures, and the positions of power, ground, configuration, clock, and user I/O balls. The IGLOO 2 packaging guide is essential because a mechanically similar BGA can still require a different escape-routing strategy.
Implement separate distribution for the 1.2 V core and any other device supplies according to the official IGLOO2 datasheet and hardware guidance. Use the manufacturer-prescribed bulk and high-frequency capacitors, place them near the relevant supply balls, and provide a low-impedance return path for every switching current. Do not infer acceptable capacitor values or sequencing requirements from general FPGA practice; verify them against the exact M2GL025 grade and package.
Plan BGA escape routing and via-in-pad access before finalizing layer count and board stack-up. Reserve access for programming, boundary-scan, validation, and production test because dense BGA layouts can otherwise make the assembled device difficult to validate. Keep sensitive configuration, clock, and high-speed interface routes away from noisy switching nodes and follow the manufacturer’s layout guidance for each supported I/O standard.
A shared 256-LFBGA package does not by itself prove that two FPGA order codes are interchangeable. The M2GL025-VFG256I and M2GL025-VFG256 differ in their temperature ordering suffixes, so compare junction-temperature limits, electrical characteristics, supported I/O standards, configuration behavior, and lifecycle commitments. Do not approve the non-I variant for an industrial deployment without checking the complete operating-temperature requirements.
Estimated power and junction-temperature calculations require the final supply voltage, utilization, switching activity, clock rate, I/O load, ambient temperature, and board thermal data; none of those complete operating conditions are published in the available product excerpts. Therefore, no numerical power-dissipation result is stated here. Use Microchip’s power-estimation guidance with the actual design workload, then verify thermal performance with a thermal vias, copper distribution, and worst-case ambient conditions.
Compliance-Informationen
The available product and distributor excerpts do not explicitly state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. The I suffix denotes the industrial ordering option, but it is not an automotive qualification and does not establish AEC-Q100 status.