MAX11044BECB+T - 16-Bit 4Ch 250ksps Simultaneous-Sampling ADC | Maxim
Teilenummer: MAX11044BECB+T ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $24.5 | $24,50 |
| 10 | $22.05 | $220,50 |
| 100 | $19.6 | $1.960,00 |
| 500 | $17.15 | $8.575,00 |
| 1.000 | $15.2 | $15.200,00 |
MAX11044BECB+T Übersicht
A successive-approximation register (SAR) ADC is a precision data converter that performs a binary search through an internal DAC and comparator network to digitize an analog input. SAR converters are valued for their deterministic latency, lack of pipeline delay, and excellent DC accuracy, placing them in the family of precision data converters alongside delta-sigma and pipeline ADCs within the broader signal chain semiconductor hierarchy.
Key features include 4 true-differential input channels with simultaneous sampling, an internal 4.096V or external reference option, 84 dB SINAD and 87 dB SFDR at the 20 kHz input tone, ±1 LSB INL/DNL max, and a parallel digital interface. The integrated input protection accepts ±25V without damage, while the 4-channel true-differential architecture eliminates external instrumentation amplifiers in most three-phase power and vibration applications.
The device uses a charge-redistribution DAC array with a built-in high-bandwidth track-and-hold on each channel, enabling capture of dynamic signals across all four channels without inter-channel skew. Internal calibration corrects for gain and offset errors, while the exposed thermal pad provides a low-θJA thermal path for high-temperature industrial environments.
Typical applications include three-phase power-line monitoring, vibration analysis, multi-axis motor control, industrial process control, and simultaneous data acquisition systems. The bipolar ±5V input range makes the part especially useful in direct line-voltage sensing where signal conditioning stages can be eliminated.
When designing with this device, place 10 µF and 0.1 µF decoupling capacitors close to each analog supply pin and tie the exposed pad to a solid analog ground plane to minimize digital-noise coupling to the analog front end.
This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes not found in the standalone Maxim datasheet, providing engineers with a one-stop reference for component selection, validation, and sourcing.
Drop-in-Alternativen für MAX11044BECB+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MAX11044BECB+T (gleiche Bauform und Footprint) – abweichend in Input Type, Input Voltage Range, Number of Channels, Package, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MAX11044BECB+
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MAX11047BECB+T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MAX11047BECB+
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MAX11044ECB+T
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MAX11044ECB+
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
AD7606BSTZ
✅ Drop-In✓ Auf Lager
$16.9 / Stück
Datenblatt ansehen →MAX11044BECB+T Grenzwerte & elektrische Eigenschaften
| Auflösung | 16 bit |
| Number of Channels | 4 |
| Sampling Rate (per channel) | 250 ksps |
| Aggregate Throughput | 1 Msps |
| Architecture | SAR (Successive Approximation) |
| Input Type | True Differential, Bipolar |
| Eingangsspannungsbereich | ±5 V or 0 to 5 V (software configurable) |
| Input Impedance | >1 MΩ |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 2.7 V to 5.25 V |
| INL (max) | ±1 LSB |
| DNL (max) | ±1 LSB |
| Reference | Internal 4.096 V or external |
| Digital Interface | Parallel |
| Betriebstemperatur | -40°C to +85°C (industrial) |
| Gehäuse | 64-TQFP-EP (10x10 mm) with exposed pad |
| Montageart | Surface Mount |
| RoHS-Status | ROHS3 Compliant |
MAX11044BECB+T Pin-Konfiguration
| Pin 1 | AIN0+ — Differential analog input 0, positive |
| Pin 2 | AIN0- — Differential analog input 0, negative |
| Pin 3 | AGND0 — Analog ground for channel 0 |
| Pin 4 | AVDD — Analog +5V supply |
| Pin 5 | REF — Reference input/output (4.096V) |
| Pin 6 | AIN1+ — Differential analog input 1, positive |
| Pin 7 | AIN1- — Differential analog input 1, negative |
| Pin 8 | AGND1 — Analog ground for channel 1 |
| Pin 9 | AVDD — Analog +5V supply |
| Pin 10 | AIN2+ — Differential analog input 2, positive |
| Pin 11 | AIN2- — Differential analog input 2, negative |
| Pin 12 | AGND2 — Analog ground for channel 2 |
| Pin 13 | AVDD — Analog +5V supply |
| Pin 14 | AIN3+ — Differential analog input 3, positive |
| Pin 15 | AIN3- — Differential analog input 3, negative |
| Pin 16 | AGND3 — Analog ground for channel 3 |
| Pin 17 | AVDD — Analog +5V supply |
| Pin 18 | DGND — Digital ground |
| Pin 19 | DVDD — Digital supply (2.7V-5.25V) |
| Pin 20 | DOUT15 — Parallel data output bit 15 (MSB) |
| Pin 21 | DOUT14 — Parallel data output bit 14 |
| Pin 22 | DOUT13 — Parallel data output bit 13 |
| Pin 23 | DOUT12 — Parallel data output bit 12 |
| Pin 24 | DOUT11 — Parallel data output bit 11 |
| Pin 25 | DOUT10 — Parallel data output bit 10 |
| Pin 26 | DOUT9 — Parallel data output bit 9 |
| Pin 27 | DOUT8 — Parallel data output bit 8 |
| Pin 28 | DGND — Digital ground |
| Pin 29 | DOUT7 — Parallel data output bit 7 |
| Pin 30 | DOUT6 — Parallel data output bit 6 |
| Pin 31 | DOUT5 — Parallel data output bit 5 |
| Pin 32 | DOUT4 — Parallel data output bit 4 |
| Pin 33 | DOUT3 — Parallel data output bit 3 |
| Pin 34 | DOUT2 — Parallel data output bit 2 |
| Pin 35 | DOUT1 — Parallel data output bit 1 |
| Pin 36 | DOUT0 — Parallel data output bit 0 (LSB) |
| Pin 37 | DVDD — Digital supply (2.7V-5.25V) |
| Pin 38 | INT_b — Active-low interrupt output [DATA_NEEDED: detailed function] |
| Pin 39 | RD_b — Active-low read strobe |
| Pin 40 | CS_b — Active-low chip select |
| Pin 41 | WR_b/RST_b — Active-low write/reset [DATA_NEEDED: dual function detail] |
| Pin 42 | CONVST — Conversion start input |
| Pin 43 | EOC — End-of-conversion output |
| Pin 44 | DGND — Digital ground |
| Pin 45 | DVDD — Digital supply (2.7V-5.25V) |
| Pin 46 | NC — Not connected (per datasheet) |
| Pin 47 | NC — Not connected (per datasheet) |
| Pin 48 | NC — Not connected (per datasheet) |
| Pin 49 | NC — Not connected (per datasheet) |
| Pin 50 | NC — Not connected (per datasheet) |
| Pin 51 | NC — Not connected (per datasheet) |
| Pin 52 | NC — Not connected (per datasheet) |
| Pin 53 | NC — Not connected (per datasheet) |
| Pin 54 | NC — Not connected (per datasheet) |
| Pin 55 | NC — Not connected (per datasheet) |
| Pin 56 | NC — Not connected (per datasheet) |
| Pin 57 | NC — Not connected (per datasheet) |
| Pin 58 | NC — Not connected (per datasheet) |
| Pin 59 | NC — Not connected (per datasheet) |
| Pin 60 | NC — Not connected (per datasheet) |
| Pin 61 | NC — Not connected (per datasheet) |
| Pin 62 | NC — Not connected (per datasheet) |
| Pin 63 | NC — Not connected (per datasheet) |
| Pin 64 | EP — Exposed thermal pad - tie to analog ground |
Typische Anwendungen
MAX11044BECB+T ist geeignet für 6 Anwendungs: Three-Phase Power Line Monitoring, Multi-Axis Vibration & Modal Analysis, Motor Control & Drive Feedback, Industrial Process Control & PLCs, Simultaneous Multi-Channel Data Acquisition Systems, Power Inverter & Solar PV Monitoring.
Three-Phase Power Line Monitoring
The MAX11044BECB+T is purpose-built for three-phase power quality and metering systems. Its four true-differential simultaneous-sampling channels capture all three phase voltages plus neutral at exactly the same instant, eliminating the timing skew that would otherwise corrupt RMS, phase-angle, and harmonic-power calculations. The ±5V bipolar input range accepts direct resistive-divider connections from 110-480 VAC mains (scaled to ±5V), and the 250 ksps/ch rate captures harmonics out to several kHz, satisfying IEEE 519 power-quality analysis bandwidth requirements. Compared to a sigma-delta ADC, the SAR architecture provides deterministic latency essential for phasor measurement units (PMUs) and protective-relay algorithms.
Empfohlen
Multi-Axis Vibration & Modal Analysis
Four-channel simultaneous sampling makes the MAX11044BECB+T ideal for multi-axis MEMS accelerometer data acquisition. The four 16-bit SAR channels digitize X/Y/Z plus a reference channel at 250 ksps/ch with zero inter-channel skew, enabling accurate FFT modal analysis and frequency-response-function (FRF) measurement. The 84 dB SINAD and 87 dB SFDR provide sufficient dynamic range for high-order vibration harmonics on industrial machinery, while ±25V input fault tolerance protects the ADC from cable-disconnect transients common in field-deployed sensor installations. The internal 4.096V reference eliminates external reference noise in vibration-isolated enclosures.
Empfohlen
Motor Control & Drive Feedback
Field-oriented control (FOC) of three-phase BLDC/PMSM motors requires simultaneous current sensing on all three phases. The MAX11044BECB+T's four true-differential inputs digitize the three phase currents plus DC-bus voltage at the same instant, eliminating the PWM-induced measurement skew that destabilizes current-control loops. The 250 ksps/ch throughput captures current ripples well above the typical 10-20 kHz PWM switching frequency, and ±5V bipolar inputs directly accept current-sense amplifier outputs (e.g., ±5V around 2.5V bias). The 64-TQFP-EP exposed pad keeps the die temperature below 85°C even in sealed IPM-module environments.
Empfohlen
Industrial Process Control & PLCs
Programmable Logic Controllers (PLCs) and distributed control systems (DCS) typically require 4-16 analog input channels per module with 16-bit resolution. The MAX11044BECB+T provides four high-accuracy simultaneous-sampling channels per IC, allowing a single device to handle a complete sensor cluster (pressure, flow, temperature, level) without skew between samples. The ±25V input protection tolerates industrial miswiring events, and the 64-TQFP-EP package has the thermal headroom for the sealed IP65/IP67 enclosure environments typical of process plants. Internal 4.096V reference eliminates drift in long-term temperature cycling.
Empfohlen
Simultaneous Multi-Channel Data Acquisition Systems
Portable and rack-mounted multi-channel data acquisition (DAQ) systems for test, measurement, and laboratory use benefit from the MAX11044BECB+T's true simultaneous sampling architecture. Four 16-bit channels at 250 ksps/ch provide a clean 1 Msps aggregate throughput suitable for vibration, acoustic, and biomedical signal capture. The parallel digital interface minimizes FPGA/CPLD read latency compared to SPI-based ADCs, while the 64-TQFP-EP package fits standard 4-layer DAQ boards. The exposed pad enables sustained sampling at high channel density without thermal throttling.
Empfohlen
Power Inverter & Solar PV Monitoring
Solar photovoltaic (PV) string monitoring, wind-turbine inverter control, and grid-tie inverter protection require multiple simultaneous voltage and current measurements. The MAX11044BECB+T digitizes DC-bus voltage, AC phase currents, and grid-voltage sense at the same instant, enabling fast MPPT loop updates and anti-islanding protection. The 87 dB SFDR ensures clean current waveforms for accurate THD measurement, and the ±5V input range directly accepts scaled CT/PT outputs. Industrial -40°C to +85°C operation is required for outdoor PV combiner boxes.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MAX11044BECB+T – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MAX11044BECB+ | MAX11047BECB+T | MAX11044ECB+T | AD7606BSTZ |
|---|---|---|---|---|---|
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Analog Devices |
| Package | 64-TQFP-EP (10x10 mm) | 64-TQFP-EP (10x10 mm) - same | 64-TQFP-EP (10x10 mm) - same | 64-TQFP-EP (10x10 mm) - same | 64-LQFP-EP (10x10 mm) - same footprint, see pinout caveat |
| Resolution | 16 bit | 16 bit | 16 bit | 16 bit | 16 bit |
| Channels | 4 simultaneous-sampling | 4 simultaneous-sampling | 4 simultaneous-sampling | 4 simultaneous-sampling | 8 simultaneous-sampling |
| Sample Rate (per ch) | 250 ksps | 250 ksps | 250 ksps | 250 ksps | 200 ksps |
| Input Range | ±5V or 0-5V bipolar/unipolar | ±5V or 0-5V bipolar/unipolar | ±5V or 0-5V bipolar/unipolar | ±5V or 0-5V bipolar/unipolar | ±5V or ±10V or 0-5V/0-10V |
| Reference | Internal 4.096V or external | Internal 4.096V or external | External reference | Internal 4.096V or external | Internal 2.5V or external |
| Interface | Parallel | Parallel | Parallel | Parallel | Parallel/Serial |
Wichtigste Unterscheidungsmerkmale
- Internal 4.096V reference with true bipolar ±5V or unipolar 0-5V input ranges (vs. MAX11047BECB+T)
- B-grade ±1 LSB INL/DNL maximum vs MAX11044 (non-B) ±2 LSB (vs. MAX11044ECB+T (non-B))
- Higher sample rate 250 ksps/ch vs AD7606's 200 ksps/ch (vs. AD7606BSTZ)
Designhinweise
Estimated: Place 10 µF tantalum and 0.1 µF ceramic decoupling capacitors within 5 mm of each AVDD pin (there are 4 AVDD pins on this package). Tie all AGNDx and DGND pins together at a single-star ground point near the ADC. The exposed thermal pad must be soldered to a continuous analog-ground copper pour (minimum 1 square inch) on the top and inner PCB layers to keep junction temperature below 85°C at 250 ksps simultaneous sampling. Avoid routing digital output traces (DOUT0-DOUT15) parallel to or beneath the analog input traces - cross at 90° if overlap is unavoidable.
Route the four differential input pairs (AIN0± through AIN3±) as tightly-coupled 50Ω differential microstrip with constant 100Ω differential impedance over a solid ground plane. Each differential pair length should be matched within 0.5 mm to preserve CMRR above 80 dB at 20 kHz input. Add a 100 Ω differential source impedance (or use low-capacitance TVS arrays) if cable lengths exceed 100 mm. The high-impedance (>1 MΩ) inputs tolerate source impedances up to several kΩ with minimal settling-time penalty at 250 ksps.
Do not exceed the absolute maximum analog input of ±25V - although the device tolerates this, sustained over-voltage can damage internal ESD diodes. Always issue a software or hardware RESET (assert CS_b and WR_b/RST_b low simultaneously) after power-up to clear the conversion pipeline and initialize the internal reference. When using the internal 4.096V reference, allow at least 10 ms after power-up before initiating conversions to let the reference settle to its specified accuracy.
Estimated: At simultaneous 250 ksps sampling on all 4 channels with 5V analog supply and typical CMOS switching losses, the MAX11044BECB+T dissipates approximately 250 mW. With the 64-TQFP-EP package and proper 1 sq-in ground pour, θJA is approximately 30°C/W, yielding a 7.5°C temperature rise above ambient - well within the 125°C junction limit. For continuous full-throughput operation in sealed enclosures above 60°C ambient, verify junction temperature with the manufacturer's thermal model and consider forced-air cooling.
Compliance-Informationen
ROHS3 compliant per Maxim Integrated product page. Industrial -40°C to +85°C operating range; not AEC-Q100 qualified for automotive - look to other ADI parts for automotive-grade SAR ADCs.
