Analog Devices

MAX3232ECAE+T - 15kV ESD RS-232 Transceiver 1Mbps | Analog Devices

Teilenummer: MAX3232ECAE+T ✓ Aktiv
3.0 V to 5.5 V Vdss 10 nA (typ) Id 16-pin SSOP (CAE) Package
MOQ: 1 |

MAX3232ECAE+T Übersicht

The Analog Devices (Maxim Integrated) MAX3232ECAE+T is a ±15kV ESD-protected, 2-driver/2-receiver true RS-232 transceiver operating from a single 3.0V to 5.5V supply, supporting data rates up to 1Mbps in a 16-pin SSOP (CAE) package supplied on tape and reel. It integrates a dual charge-pump circuit that generates ±5.5V RS-232 level swings from a single low-voltage rail, eliminating the need for external negative supplies.

An RS-232 transceiver is a line driver/receiver IC that converts logic-level UART signals (0V to 3.3V or 5V) to the voltage levels defined by EIA/TIA-232 and V.28/V.24, and vice versa. Within the signal-chain hierarchy, it sits in the interface IC family between a microcontroller UART and a physical serial-port connector, performing both level translation and electrical isolation of the cable environment.

Key features include ±15kV IEC 61000-4-2 air-gap and human-body-model ESD protection on all transmitter outputs and receiver inputs, ultra-low 10nA typical shutdown supply current for battery-powered designs, guaranteed 250kbps minimum data rate under worst-case loading (up to 1Mbps typical in driver-load configurations), and the industry-standard MAX232-compatible pinout for drop-in upgrades of legacy designs. Logic-compatible receiver outputs make direct connection to 3V and 5V MCUs possible.

The device uses Maxim's proprietary charge-pump architecture with four small external 0.1uF capacitors to produce the required RS-232 levels, reducing board area and component count. Enhanced ESD structures protect the serial-port connection pins including GND, a critical advantage for cables exposed to human handling in industrial field environments.

Typical applications include industrial process-control serial links, point-of-sale terminals, battery-powered portable instruments, and embedded systems that bridge modern MCUs to legacy RS-232 equipment such as PLCs, meters, and modems. The 3.0V operation suits lithium-battery and 3.3V logic designs directly.

Design consideration: the CAE temperature grade is 0C to +70C; select the industrial-grade MAX3232EEAE variant for -40C to +85C environments. Charge-pump capacitors must be placed close to the device to minimize supply droop at high data rates.

This page adds value beyond the manufacturer datasheet by synthesizing drop-in cross-references (including the MaxLinear SP3232EBCA-L/TR), package and grade comparisons, pricing context, and practical design notes in one place.

Drop-in-Alternativen für MAX3232ECAE+T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3232ECAE+T (gleiche Bauform und Footprint) – abweichend in Package, Supply Voltage Range, ESD Protection, Maximum Data Rate, Number of Drivers.

Analog Devices
Package: 16-pin SSOP
Supply Voltage Range: 3.0V to 5.5V
ESD Protection: plus or minus 15kV
Vergleichen mit MAX3232ECAE+T →
Analog Devices
Package: 16-SSOP, 5.30 mm width
Maximum Data Rate: 1 Mbps
Number of Drivers: 2 drivers
Vergleichen mit MAX3232ECAE+T →
MaxLinear
Package: 16-SSOP (0.209, 5.30 mm Width)
Supply Voltage Range: +3.0 V to +5.5 V
ESD Protection: 15 kV

MAX3232EEAE+T

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 16-SSOP (AE)
industrial temperature grade -40°C to +85°C vs 0°C to +70°C; identical pinout, ESD and data rate

📋 Referenzalternative (nicht im Katalog)

MAX3232EAE+T

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 16-SSOP (AE)
same E-grade protection and 16-SSOP package in tape-and-reel packing; family variant

📋 Referenzalternative (nicht im Katalog)

MAX3232CAE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 16-SSOP (AE)
RS-232 interface transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · True RS-232 · 16-pin SSOP · Dual charge pump

Preis auf Anfrage

Datenblatt ansehen →

SP3232EBCA-L/TR

✅ Drop-In
MaxLinear
📦 16-SSOP
RS-232 transceiver · 2 · 2 · +3.0 V to +5.5 V · 250 kbit/s · 15 kV · 0.1 µF · RS-232

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECAE+T Technische Daten

Funktion RS-232 Transceiver
Number of Drivers / Receivers 2 / 2
Protocol RS-232 (EIA/TIA-232, V.28/V.24)
Supply Voltage Range 3.0 V to 5.5 V
Datenrate Up to 1 Mbps (250 kbps minimum guaranteed)
ESD Protection ±15 kV IEC 61000-4-2 air-gap, ±15 kV HBM
Shutdown Supply Current 10 nA (typ)
Temperature Grade 0°C to +70°C (C grade)
Gehäuse 16-pin SSOP (CAE)
Montageart Surface Mount
Packaging Tape and Reel
Duplex Full Duplex
Charge Pump Capacitors 4 x 0.1 uF external
Receiver Output Logic Level 3V/5V logic compatible
Pin Compatibility Industry-standard MAX232 pinout
REACH Status SVHC exceeds threshold (per distributor listing)

MAX3232ECAE+T Pin-Konfiguration

SSOP-16 Package Pinout Diagram SSOP-16 3.9x6.0mm, P0.635mm, JEDEC MO-150. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SSOP-16
Pin 1 C1+ — Charge pump capacitor positive terminal (external capacitor C1)
Pin 2 V+ — Positive charge pump output (reservoir capacitor to GND)
Pin 3 C1- — Charge pump capacitor negative terminal (external capacitor C1)
Pin 4 C2+ — Charge pump capacitor positive terminal (external capacitor C2)
Pin 5 C2- — Charge pump capacitor negative terminal (external capacitor C2)
Pin 6 V- — Negative charge pump output (reservoir capacitor to GND)
Pin 7 T2OUT — RS-232 transmitter 2 output (±15kV ESD protected)
Pin 8 R2IN — RS-232 receiver 2 input (±15kV ESD protected)
Pin 9 R2OUT — TTL/CMOS receiver 2 output (logic level)
Pin 10 T2IN — TTL/CMOS transmitter 2 input
Pin 11 T1IN — TTL/CMOS transmitter 1 input
Pin 12 R1OUT — TTL/CMOS receiver 1 output (logic level)
Pin 13 R1IN — RS-232 receiver 1 input (±15kV ESD protected)
Pin 14 T1OUT — RS-232 transmitter 1 output (±15kV ESD protected)
Pin 15 GND — Ground
Pin 16 VCC — Supply voltage, 3.0V to 5.5V

Typische Anwendungen

MAX3232ECAE+T ist geeignet für 6 Anwendungs: Industrial Process Control Serial Links, Battery-Powered Portable Instruments, Point-of-Sale and Retail Terminals, Embedded MCU-to-Legacy Equipment Bridges, Networking and Telecom Equipment Management Ports, Test and Measurement Instrumentation.

🏭

Industrial Process Control Serial Links

Factory controllers, PLCs, and field instruments still rely on RS-232 links for commissioning and data exchange. The MAX3232ECAE+T fits this role because its ±15kV IEC 61000-4-2 air-gap and HBM ESD protection covers the cable-facing pins, including GND, surviving the handling and discharge events common on the factory floor. Its 3.0V to 5.5V single-supply operation lets it sit on the same rail as a modern 3.3V or 5V controller without a level-shifter, and the 1Mbps capability comfortably exceeds the 115.2kbps rate typical of industrial serial links. Place the four 0.1uF charge-pump capacitors near the device; run twisted-pair or shielded cable for runs longer than a few meters, and prefer the industrial-grade MAX3232EEAE variant where ambient temperatures can fall below 0°C.

📱

Battery-Powered Portable Instruments

Handheld meters, data loggers, and portable test equipment often need an RS-232 port while running from a single lithium cell. The MAX3232ECAE+T addresses this directly: its 3.0V minimum supply connects to one Li-ion/Li-SOCl2 cell without a boost converter, and its 10nA typical shutdown current means the serial port costs virtually nothing in standby. Four small 0.1uF ceramic capacitors form the charge pump, keeping board area and cost minimal inside a handheld enclosure. The 16-SSOP package is compact yet hand-solderable for prototyping. Designers should connect the shutdown pin to a GPIO so the transceiver powers down between communication windows, and verify the 250kbps guaranteed minimum data rate covers the instrument's logging protocol when operating at reduced supply voltage.

🧩

Point-of-Sale and Retail Terminals

Receipt printers, barcode scanners, and cash drawers in legacy POS installations communicate over RS-232, and replacement control boards must speak that protocol. The MAX3232ECAE+T provides the required EIA/TIA-232-F levels from a single 3.3V or 5V logic supply, with 1Mbps headroom over the 9.6k to 115.2k baud rates POS peripherals use. The ±15kV ESD protection is particularly valuable here: customers and staff touch connector shells constantly, and the protected pins tolerate discharge events that would damage unprotected transceivers. Its MAX232 pin compatibility allows repair of existing boards without re-layout. Use 0.1uF charge-pump capacitors rated at 16V or higher, and keep the receiver outputs' 3V/5V logic compatibility in mind when interfacing to the terminal MCU.

🔧

Embedded MCU-to-Legacy Equipment Bridges

Many modern embedded designs - gateways, converters, retrofit controllers - must bridge a 3.3V UART to legacy RS-232 equipment such as modems, CNC machines, or medical devices. The MAX3232ECAE+T is purpose-built for this: two drivers and two receivers give a full-duplex channel plus a spare pair, receiver outputs are directly logic-compatible with 3V MCUs, and the charge pump generates proper ±5V RS-232 swings from the logic rail. The MAX232-compatible pinout lets designers copy proven reference layouts. For firmware development, the 1Mbps capability supports fast console links. Add 100pF snubber-free routing practice for the TOUT lines and verify that legacy equipment tolerates the charge-pump output impedance, which is slightly higher than a bipolar-driver MAX232.

🌐

Networking and Telecom Equipment Management Ports

Routers, switches, and telecom gear expose RS-232 console ports for out-of-band management, and these ports face frequent human contact. The MAX3232ECAE+T's ±15kV IEC and HBM ESD ratings on all transmitter outputs and receiver inputs, including the ground-referenced cable pins, protect the management interface across years of technician handling. Operation from a 3.3V rail matches typical networking logic supplies, and the 1Mbps data rate accommodates fast console transfer and boot-log capture. The commercial 0°C to +70°C grade suits indoor telecom closets; select MAX3232EEAE for outdoor cabinets. Keep the four charge-pump capacitors within a few millimeters of the IC and use a solid ground plane to contain charge-pump ripple on the transmitter outputs.

🖥️

Test and Measurement Instrumentation

Bench instruments, environmental loggers, and sensor heads frequently retain RS-232 interfaces for PC connectivity because the standard is simple, robust, and universally supported. The MAX3232ECAE+T serves these designs with guaranteed EIA/TIA-232-F compliance from a single 3.0V to 5.5V supply, eliminating the dual-supply complexity of older MAX232A-class parts. Its 250kbps guaranteed worst-case data rate comfortably covers SCPI-over-serial and typical logger throughput, while 10nA shutdown supports battery-backed field units that wake periodically to dump data. The ±15kV ESD rating protects against discharge from operators connecting and disconnecting cables during test sessions. Designers should follow the datasheet's capacitor recommendation (0.1uF at 3.3V) and validate noise margin at the lowest expected supply voltage.

What is the operating voltage range of MAX3232ECAE+T?
The MAX3232ECAE+T operates from a single supply of 3.0V to 5.5V. According to the Analog Devices MAX3232E datasheet, the internal dual charge pump generates the required RS-232 output levels from this single low-voltage rail, so no external negative supply is needed. This makes the part usable directly on 3.3V, 3.0V lithium-battery, or 5V rails without a second regulator.
What data rate can the MAX3232ECAE+T support?
The MAX3232ECAE+T supports data rates up to 1Mbps, with a minimum guaranteed data rate of 250kbps under worst-case RS-232 loading. According to the Analog Devices MAX3232E product documentation, the transceiver meets EIA/TIA-232-F requirements while exceeding the standard 115.2kbps rate commonly used for serial ports, giving headroom for fast UART-to-RS-232 links.
How much ESD protection does the MAX3232ECAE+T provide?
The MAX3232ECAE+T provides ±15kV IEC 61000-4-2 air-gap ESD protection and ±15kV human-body-model protection on all transmitter outputs and receiver inputs, including the serial-port connection pins. Per the Analog Devices MAX3232E datasheet, this level of protection on the cable-facing pins is a key advantage over standard transceivers in industrial environments where serial connectors are frequently touched.
What is the difference between MAX3232ECAE+T and MAX3232CAE+?
The MAX3232ECAE+T adds enhanced ±15kV ESD protection on the RS-232 pins, while the MAX3232CAE+ (non-E) offers only standard ESD ratings. Both share the same 16-pin SSOP package, identical pinout, 3.0V to 5.5V supply range, and 1Mbps data-rate capability. Designs requiring direct exposure to human-handled cables should use the E version; internally protected links can use either part without layout changes.
What is the difference between MAX3232ECAE+T and MAX3232EEAE+T?
The temperature grade is the main difference: the MAX3232ECAE+T is a commercial-grade part rated 0°C to +70°C, while the MAX3232EEAE+T is the industrial-grade variant rated -40°C to +85°C. Both use the same 16-pin SSOP (AE) package, identical pinout, ±15kV ESD protection, and 1Mbps data rate. For outdoor or factory-floor environments that can drop below freezing, select the E suffix industrial grade.
What is the best drop-in replacement for MAX3232ECAE+T?
The MaxLinear SP3232EBCA-L/TR is a manufacturer-listed drop-in replacement for the MAX3232ECAE+ in the same 16-pin SSOP package, with pin-to-pin compatibility and matching ±15kV ESD protection and 3.0V to 5.5V operation. According to MaxLinear's official cross-reference table, it is classified as a Drop-in Replacement, meaning most designs require no change. Same-brand Analog Devices MAX3232E variants in the AE package also serve as second sources.
Is MAX3232ECAE+T pin compatible with the MAX232?
Yes. According to Analog Devices, the MAX3232E is pin, package, and functionally compatible with the industry-standard MAX232. This means a board laid out for the original MAX232 (or MAX202) can accept the MAX3232ECAE+T directly, gaining 3.0V operation, lower power consumption, higher data rates, and enhanced ESD protection without PCB re-engineering - valuable during legacy serial-port upgrades.
Can MAX3232ECAE+T be used in 3.3V microcontroller designs?
Yes. The MAX3232ECAE+T operates from 3.0V to 5.5V, so it connects directly to a 3.3V supply, and its receiver outputs are logic-level compatible with 3V and 5V microcontroller UARTs. This makes it suitable for STM32, ESP32, and other 3.3V embedded systems that need RS-232 links to PLCs, meters, or legacy equipment. Only four external 0.1uF charge-pump capacitors are required around the device.
What charge pump capacitors are required for the MAX3232ECAE+T?
The MAX3232ECAE+T requires four external capacitors for its dual charge pump. According to the Analog Devices MAX3232E datasheet, 0.1uF ceramic capacitors are recommended for the C1+, C1-, C2+, C2- flying capacitors and for the V+ and V- reservoirs at a 3.3V supply. Place them close to the device pins to minimize charge-pump ripple and supply droop at high data rates.
Where can I download the MAX3232ECAE+T datasheet PDF?
The MAX3232ECAE+T datasheet is available from the Analog Devices website on the MAX3232E product page (analog.com/en/products/max3232e.html), listed as the ±15kV ESD-Protected, Down to 10nA, 3.0V to 5.5V, Up to 1Mbps True RS-232 Transceivers data sheet (Rev. 13). The pinout, charge-pump design equations, ESD ratings, and timing specifications are all in that document. You can also request documentation through the quote form on this page.
Is MAX3232ECAE+T suitable for battery-powered RS-232 applications?
Yes. The MAX3232ECAE+T is specifically targeted at battery-powered designs: in shutdown it draws only 10nA typical supply current, one of the lowest figures among RS-232 transceivers. Combined with 3.0V minimum operation - allowing direct connection to a single lithium cell - and the compact 16-pin SSOP package, it suits portable instruments, handheld meters, and battery-backed data loggers that still require a physical RS-232 port.
What is the operating temperature range of MAX3232ECAE+T?
The MAX3232ECAE+T is rated for 0°C to +70°C, corresponding to the C (commercial) temperature grade indicated by the C letter in the part number. According to Analog Devices product documentation, the same silicon is offered in the industrial MAX3232EEAE+T grade covering -40°C to +85°C in the identical 16-pin SSOP package. Designs facing outdoor or industrial-ambient temperatures should use the industrial-grade variant.
MAX3232ECAE+T vs SP3232EBCA-L/TR - which is better for industrial serial links?
Both are strong choices for industrial RS-232 links. The MAX3232ECAE+T from Analog Devices and the MaxLinear SP3232EBCA-L/TR are pin-to-pin compatible in 16-SSOP with ±15kV ESD protection and 3.0V to 5.5V operation, so either works without PCB changes. Choose the MAX3232ECAE+T for continuity with the proven MAX3232E lineage and extensive legacy field history; choose the SP3232EBCA-L/TR as a second source or when Analog Devices supply is constrained. Verify the guaranteed data-rate figure needed for your application in both datasheets.
Where to buy MAX3232ECAE+T and what is the lead time?
You can request MAX3232ECAE+T availability, pricing, and lead time through the Request a Quote form on this page. The part is distributed internationally and offered in tape-and-reel packing, so standard reel quantities suit volume production. For prototype quantities, cut-tape portions may be negotiable depending on stock position - state your required quantity and delivery date in the quote request and XAIPART will respond with the current offer.
What are the key specifications of MAX3232ECAE+T that engineers should know?
The MAX3232ECAE+T is a 2-driver/2-receiver true RS-232 transceiver from Analog Devices operating from a single 3.0V to 5.5V supply with data rates up to 1Mbps (250kbps guaranteed minimum). It provides ±15kV IEC air-gap and HBM ESD protection on the RS-232 pins, draws 10nA typical in shutdown, uses four 0.1uF external charge-pump capacitors, and comes in a 16-pin SSOP package rated 0°C to +70°C, tape and reel, pin-compatible with the standard MAX232.

Technische Referenzdaten für MAX3232ECAE+T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MAX3232ECAE+T when you need a proven 2/2 RS-232 transceiver with ±15kV ESD protection for a 3.0V to 5.5V single-supply design operating between 0°C and +70°C, such as POS terminals, console ports, and indoor industrial links. Choose MAX3232EEAE+T instead when ambient temperatures can reach -40°C - same footprint, industrial grade. Choose MAX3232CAE+ when the cable interface is mechanically protected and ESD exposure is minimal, saving cost on the enhanced structures. Choose SP3232EBCA-L/TR when you want a second source or ADI allocation relief; MaxLinear classifies it as a pin-compatible drop-in. All four parts share the 16-SSOP footprint and MAX232 pinout, so PCB layout carries across the entire selection. For designs needing more than two drivers or receivers, move to the MAX3243E family instead.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3232EEAE+T MAX3232EAE+T MAX3232CAE+ SP3232EBCA-L/TR
Package 16-SSOP (AE) 16-SSOP (AE) - same 16-SSOP (AE) - same 16-SSOP (AE) - same 16-SSOP - same
Brand Analog Devices (Maxim Integrated) Analog Devices Analog Devices Analog Devices MaxLinear
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Data Rate Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps Up to 1 Mbps
ESD Protection ±15 kV IEC air-gap / HBM ±15 kV ±15 kV Standard ESD (lower) ±15 kV
Drivers / Receivers 2 / 2 2 / 2 2 / 2 2 / 2 2 / 2
Pin Compatibility MAX232 standard pinout Same - pin-to-pin Same - pin-to-pin Same - pin-to-pin Same - pin-to-pin per MaxLinear cross-reference

Wichtigste Unterscheidungsmerkmale

  • Enhanced ±15kV ESD protection on serial-port pins (vs. MAX3232CAE+)
  • Commercial-grade cost with same footprint as industrial variant (vs. MAX3232EEAE+T)
  • Cross-brand second source exists (vs. SP3232EBCA-L/TR)

Designhinweise

Place the four charge-pump flying capacitors (C1+, C1-, C2+, C2-) and the V+/V- reservoir capacitors within 10 mm of the MAX3232ECAE+T pins, with short, direct traces. Use 0.1uF X7R ceramic capacitors at a 3.3V supply per the Analog Devices datasheet recommendation. Long charge-pump traces increase series inductance, degrading output voltage regulation at high data rates and coupling switching ripple into nearby analog circuitry. Also place a 0.1uF decoupling capacitor directly across VCC and GND.

The CAE suffix denotes the commercial temperature grade of 0°C to +70°C. Using this part in outdoor, automotive-cabin, or unheated industrial environments that fall below 0°C risks specification violations. Substitute the industrial-grade MAX3232EEAE variant (-40°C to +85°C), which shares the identical 16-SSOP footprint, before releasing a design destined for cold environments. Verify the temperature requirement on the BOM before layout reuse from an existing MAX3232 design.

The internal charge pump switches continuously and its V+/V- outputs carry switching ripple. Keep the RS-232 transmitter output traces (T1OUT, T2OUT) short and route them away from sensitive analog nodes and antenna elements. A solid, unbroken ground plane under the transceiver contains both charge-pump and edge-rate noise. Because all RS-232 pins carry ±15kV ESD structures, no external TVS diodes are normally needed on the cable interface, but a series ferrite bead on the cable ground return can further suppress conducted noise in long cable runs.

Compliance-Informationen

RoHS
Unknown
REACH
Compliant
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

One distributor listing describes the -T variant as containing lead; the '+' suffix normally denotes lead-free/RoHS-compliant packaging in the Maxim scheme. Confirm final RoHS status with the manufacturer certificate of conformance before release.

Daten verifiziert am: 2026-11-17 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MAX3232ECAE+T datasheet MAX3232ECAE+T pinout MAX3232ECAE+T equivalent MAX3232ECAE+T cross reference MAX3232ECAE+T vs SP3232EBCA MAX3232ECAE+T price MAX3232ECAE+T stock Analog Devices MAX3232ECAE+T MAX3232E drop-in replacement MAX3232E 16-SSOP RS-232 transceiver 15kV ESD RS-232 transceiver 3.3V MAX3232ECAE+T datasheet pdf download

Verwandte Bauteile & Begriffe

Analog Devices Maxim Integrated MAX3232ECAE+T MAX3232E MAX232 SP3232EBCA-L/TR MaxLinear RS-232 RS-232 transceiver line transceiver interface IC EIA/TIA-232-F IEC 61000-4-2 ESD protection charge pump 16-SSOP SSOP package family surface mount tape and reel UART industrial automation quiescent current shutdown current RoHS REACH
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen