Maxim Integrated

MAX3232ICSE - 3.0V 1Mbps RS-232 Transceiver | Maxim

Teilenummer: MAX3232ICSE ✓ Aktiv
3.0V to 5.5V Vdss 16-SOIC Package
MOQ: 1 |

MAX3232ICSE Übersicht

The Maxim Integrated MAX3232ICSE is a 3.0V-to-5.5V, low-power true RS-232 line driver and receiver capable of operation at data rates up to 1Mbps. The device provides one transmitter and one receiver in a 16-SOIC package, making it suitable for UART-to-RS-232 conversion, industrial serial links, data acquisition equipment, and embedded control systems. The MAX3232 family uses a dual charge-pump architecture to generate the positive and negative voltages required by RS-232 drivers from a single low-voltage supply.

A true RS-232 transceiver is an interface integrated circuit that converts logic-level UART signals into compliant bipolar RS-232 levels and converts received RS-232 signals back into CMOS-compatible logic levels. Within the electronics hierarchy, it belongs to the RS-232 transceiver class, then the line-driver and receiver class, and ultimately the interface IC and power-management ecosystem. This hierarchy matters because the interface must bridge modern 3.3V or 5V digital systems with the voltage and signaling conventions of legacy serial equipment.

According to the manufacturer's product information, the MAX3232 operates from 3.0V to 5.5V, supports data rates up to 1Mbps, and includes low-power operation. Its true RS-232 implementation reduces the need for external level-shifting components when connecting a microcontroller UART to a DB-9 or DB-25 connector. The low-voltage supply range also enables direct use in 3.3V embedded systems without a separate 5V transceiver.

The dual charge pump generates the bipolar voltage rails required by the transmitter. Four external charge-pump capacitors support this operation, while the receiver translates the bipolar RS-232 input to a single-supply logic output. Designers must account for capacitor tolerances, charge-pump ripple, and the increased supply current that can occur when a connected RS-232 driver is active. The internal design simplifies the interface compared with discrete transistor drivers but does not eliminate good PCB-layout and decoupling practices.

Typical uses include USB-to-RS-232 adapters, test and measurement instruments, industrial controllers, security equipment, and service-port links. The 1Mbps capability gives designers margin for higher-speed UART traffic while retaining compatibility with common communication standards used in legacy RS-232 equipment. The exact ordering-code details, including temperature grade and package suffix interpretation, should be confirmed against the manufacturer part-selection information before production release.

For a reliable layout, place the charge-pump capacitors and supply bypass capacitor close to their associated pins, route the driver and receiver nets away from sensitive analog circuitry, and provide a controlled ground return for the cable interface. Keep the RS-232 connector-side nets isolated from low-level digital signals to reduce coupled noise and improve ESD survivability.

This page combines the MAX3232 family specifications, verified package information, interface-level design guidance, and focused replacement comparisons. These engineering details help distinguish electrically similar transceivers by voltage range, data rate, temperature grade, package, and protection performance before a component is selected for a new or existing RS-232 design.

Drop-in-Alternativen für MAX3232ICSE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MAX3232ICSE (gleiche Bauform und Footprint) – abweichend in Maximum Data Rate, ESD Protection, Supply Voltage Range, Package, Product Type.

Texas Instruments
Maximum Data Rate: 250 kbps
ESD Protection: ±15 kV IEC ESD protection
Supply Voltage Range: 3 V to 5.5 V
Vergleichen mit MAX3232ICSE →
Analog Devices
Maximum Data Rate: 1 Mbps
ESD Protection: ±15 kV IEC on serial-port pins
Supply Voltage Range: 3.0 V to 5.5 V
Vergleichen mit MAX3232ICSE →
Texas Instruments
Maximum Data Rate: 250 kbps
ESD Protection: ±15 kV
Supply Voltage Range: 3 V to 5.5 V
Vergleichen mit MAX3232ICSE →
Analog Devices
Maximum Data Rate: Up to 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
Vergleichen mit MAX3232ICSE →

MAX3232ESE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 16-SOIC
RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · Up to 1 Mbps · RS-232 · 16-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECSE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 16-SOIC
2 transmitters and 2 receivers · True RS-232 · 3.0 V to 5.5 V · 1 Mbps · 4 x 0.1 uF · 16 pins · 16-SOIC · Surface mount

Preis auf Anfrage

Datenblatt ansehen →

MAX3232EEAE+

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Analog Devices
📦 16-SOIC
True RS-232 transceiver · 2 · 2 · 3.0 V to 5.5 V · 1 Mbps · ±15 kV · Down to 10 nA · 2

Preis auf Anfrage

Datenblatt ansehen →

MAX3232EIDR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver/receiver transceiver · 2 drivers · 2 receivers · 250 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · ±15 kV

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ECDR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 16-SOIC
Dual RS-232 line driver and receiver · 2 channels · 3 V to 5.5 V · 250 kbps · ±15 kV IEC ESD protection · RS-232 · 2 transmit and 2 receive functions · 16-pin SOIC

Preis auf Anfrage

Datenblatt ansehen →

MAX3232ICSE Technische Daten

Product Type RS-232 line driver and receiver transceiver
Transceiver Configuration 1 transmitter and 1 receiver
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
Gehäuse 16-SOIC
Montageart Surface mount
Logic Levels RS-232 driver and receiver
Charge-Pump Architecture Dual charge pump
Charge-Pump Capacitors 4 external capacitors
ESD Protection ±15kV
Power Classification Low-power

MAX3232ICSE 16-soic Pinbelegungsleitfaden

Pinbelegung für MAX3232ICSE (16-soic-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.

Pinbelegungsdiagramm für MAX3232ICSE im 16-soic-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MAX3232ICSE.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MAX3232ICSE ist geeignet für 6 Anwendungs: 3.3V UART to RS-232 Adapter, Industrial Serial Controller, Test and Measurement Equipment, Security and Access-Control Systems, Data Acquisition Interface, Embedded Service and Configuration Port.

🔧

3.3V UART to RS-232 Adapter

The MAX3232ICSE fits a 3.3V UART-to-RS-232 adapter because its 3.0V-to-5.5V supply range eliminates the need for a separate 5V logic-side regulator. The transmitter converts the microcontroller UART output into bipolar RS-232 levels, while the receiver converts an incoming cable signal back to a 3.3V-compatible logic level. With operation specified up to 1Mbps, the device supports both conventional industrial baud rates and faster diagnostic links. Install the four required charge-pump capacitors and the local supply bypass capacitor close to the IC. Keep connector-side routing away from clock, sensor, and reference nets to reduce charge-pump coupling into the host system.

🏭

Industrial Serial Controller

The MAX3232ICSE is suitable for an industrial serial controller that must communicate with legacy RS-232 equipment while operating from a 3.3V embedded processor. The single transmitter and receiver arrangement provides the two signal paths normally required for a point-to-point RS-232 link, and the 1Mbps maximum data rate provides useful performance margin. A 3.0V-to-5.5V supply range also simplifies power architecture in mixed-voltage control boards. Confirm the exact ordering code temperature rating for the installation environment. Place the charge-pump network and supply bypass capacitor close to the device, and provide a low-impedance return path from the connector ground to the circuit ground.

📺

Test and Measurement Equipment

The MAX3232ICSE can provide the RS-232 command interface used by test and measurement equipment, programmable instruments, and service consoles. Its 1Mbps capability supports instrument-control traffic while the low 3.0V minimum supply permits operation alongside modern 3.3V control logic. The integrated driver and receiver reduce the component count compared with a discrete bipolar RS-232 implementation. The charge-pump capacitors remain essential and should use the capacitance, tolerance, and voltage rating specified in the manufacturer data sheet. Route the driver outputs directly toward the protected connector area and maintain separation from analog input channels to prevent switching transients from corrupting measurements.

🛡️

Security and Access-Control Systems

The MAX3232ICSE is useful in security and access-control equipment that retains an RS-232 configuration port for configuration, diagnostics, or legacy peripheral connectivity. The single-transceiver topology is appropriate for a two-wire serial service interface, and the 3.0V-to-5.5V operating range supports both 3.3V system controllers and 5V service-interface circuits. The ±15kV ESD protection identified for the MAX3232 family adds useful protection at an external connector boundary. The protection network still requires correct placement, short return paths, and adequate chassis grounding. Validate the complete board-level ESD and surge design because the IC rating alone does not replace connector protection or proper enclosure design.

📡

Data Acquisition Interface

The MAX3232ICSE can connect a data-acquisition controller or laboratory peripheral to a host computer through RS-232. The 1Mbps rated interface provides more bandwidth than many legacy COM-port links require, while operation from 3.0V to 5.5V lets the acquisition board use the same supply as its digital controller. The true RS-232 driver handles the bipolar voltage levels required by the cable standard. Keep the charge-pump components compact because their switching current can create supply ripple that appears in sensitive measurements. Provide local decoupling, separate noisy return current from analog grounding paths, and use a shielded cable with a defined chassis-to-board grounding strategy when the equipment is exposed to electrostatic discharge.

🖥️

Embedded Service and Configuration Port

The MAX3232ICSE is appropriate for an embedded service or configuration port when a board must offer a conventional RS-232 connection for diagnostics or firmware maintenance. The device translates between the host UART and cable-side RS-232 levels, eliminating separate TTL-to-RS-232 transistors. Its 3.0V-to-5.5V range supports common embedded rails, and its operation up to 1Mbps allows high-speed log transfer or bootloader communication. Use the manufacturer data sheet to confirm the required charge-pump capacitor network and supply bypassing. The external connector should have its own protection and chassis-ground arrangement, while the board traces should be kept short and isolated from precision analog and high-speed memory circuits.

What is the operating voltage of the MAX3232ICSE?
The MAX3232ICSE operates from 3.0V to 5.5V. According to the Analog Devices MAX3232 product page, this range allows the transceiver to run directly from common 3.3V and 5V supplies. It is therefore suitable for both 3.3V microcontrollers and conventional 5V UART interfaces without requiring a separate level shifter for the logic-side supply.
What is the maximum data rate of the MAX3232ICSE?
The MAX3232ICSE supports RS-232 data rates up to 1Mbps. The manufacturer's MAX3232 product page identifies the family as a 3.0V-to-5.5V, low-power transceiver rated up to 1Mbps. This provides useful margin for instrument-control, industrial communication, and legacy service-port links while maintaining compatibility with common UART baud rates.
Where can I download the MAX3232ICSE datasheet PDF?
The MAX3232 family documentation is available through the Analog Devices product page at https://www.analog.com/en/products/max3232.html, which links to the manufacturer data sheet. The document provides the ordering table, electrical characteristics, pin descriptions, charge-pump circuit, and RS-232 interface details needed to confirm that MAX3232ICSE is the correct suffix for the required package and temperature grade.
Where can I find the MAX3232ICSE pinout?
Use the pin-description table and package drawing in the manufacturer MAX3232 data sheet to assign PCB tracks. The MAX3232ICSE is associated with a 16-SOIC package, and the circuit also requires four charge-pump capacitors plus a local supply bypass capacitor. Confirm every connection against the exact ordering variant before fabrication.
What can replace the MAX3232ICSE?
The MAX3232ESE+ is a close same-family replacement when its temperature and ordering requirements match the MAX3232ICSE. A 16-SOIC alternative from another manufacturer may also fit when its pinout, supply range, data rate, and protection ratings match. Every candidate must be checked against the pin-description table and charge-pump capacitor connections before substitution.
Is the MAX3232ICSE the same as the MAX3232ESE+?
The MAX3232ICSE and MAX3232ESE+ are closely related MAX3232 variants, but the ordering suffixes determine the specific package and temperature grade. Both use the same core 3.0V-to-5.5V, 1Mbps true RS-232 architecture when the comparison documents confirm that configuration. Verify the exact part-selection row before treating one as a drop-in replacement.
MAX3232ICSE vs MAX3232EIDR: which is better for a 3.3V system?
Both devices target the same 3.0V-to-5.5V RS-232 use case, so the decisive factors are package variant, temperature grade, and manufacturer qualification. The MAX3232EIDR is listed for internal linking and uses the same broad interface function, while MAX3232ICSE represents the Maxim ordering family requested here. Verify the exact 16-SOIC pinout, capacitor values, and temperature limits before selecting either device.
When should I choose the MAX3232ICSE over another RS-232 transceiver?
Choose the MAX3232ICSE when the design requires a true RS-232 interface operating from 3.0V to 5.5V at rates up to 1Mbps and the manufacturer ordering variant matches the required footprint. Its dual charge pump reduces the discrete circuitry required for bipolar RS-232 levels. Select a different transceiver only when temperature grade, ESD performance, package, or lifecycle needs differ.
Is the MAX3232ICSE suitable for a UART-to-RS-232 converter?
Yes, the MAX3232ICSE is designed for a UART-to-RS-232 converter because it combines one TTL/CMOS-side driver, one receiver, a 3.0V-to-5.5V supply range, and operation up to 1Mbps. Install the required charge-pump capacitors, decouple the supply locally, and route the connector-side nets away from sensitive logic to obtain predictable operation.
How do I calculate the MAX3232ICSE charge-pump capacitor requirements?
Install the four charge-pump capacitors at the values and tolerances specified in the manufacturer MAX3232 data sheet, using the same voltage rating or higher. Place each capacitor close to its associated device pins and keep the return-current loops compact. Incorrect capacitance or long traces can increase supply ripple, reduce driver margin, and impair timing at the upper supported data rate.
What is the best cross-brand equivalent for the MAX3232ICSE?
The best cross-brand equivalent is the device with an identical 16-SOIC pin arrangement, compatible 3.0V-to-5.5V operating range, at least 1Mbps data-rate capability, and matching charge-pump capacitor connections. Cross-reference results identify several possible manufacturers, but no complete substitute specification is printed in the cited result, so each candidate must be validated against its own manufacturer data sheet before release.
Where can I buy the MAX3232ICSE and check its lead time?
Use the Request a Quote form on this page to ask about the MAX3232ICSE, current availability, minimum order quantity, and lead time. The manufacturer lists the MAX3232 family as a production product, while the exact ordering suffix and supply status can change. A quotation request provides the current commercial answer for the precise MAX3232ICSE configuration.
What is the price of the MAX3232ICSE?
Current commercial pricing for the MAX3232ICSE should be requested through the Request a Quote form on this page. The family-level manufacturer listing includes a starting list value, but it does not establish a quantity-break schedule for this exact ordering suffix. Use the form to obtain the current unit, volume, and lead-time terms.
Is the MAX3232ICSE currently in stock?
The current stock position for MAX3232ICSE should be confirmed through the Request a Quote form on this page. Manufacturer and distributor listings indicate family availability, but that does not guarantee inventory for every package and temperature suffix. Include the required quantity and target delivery date in the request for a current allocation response.
What are the key specifications of the MAX3232ICSE that engineers should know?
The key specifications are a 3.0V-to-5.5V supply range, operation up to 1Mbps, one RS-232 transmitter and receiver, a dual charge-pump architecture, ±15kV ESD protection, and a 16-SOIC package. According to the Analog Devices MAX3232 product page and data sheet, these features support low-voltage embedded UART-to-RS-232 interfaces while reducing the external bipolar-driver circuitry.

Technische Referenzdaten für MAX3232ICSE – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MAX3232ICSE when the design needs a one-driver, one-receiver true RS-232 interface operating from 3.0V to 5.5V at rates up to 1Mbps, particularly when the host UART uses a 3.3V supply. The integrated dual charge pump reduces the component count and simplifies the bipolar interface compared with a discrete driver. When comparing same-family choices such as MAX3232ESE+, MAX3232ECSE+, MAX3232EEAE+, MAX3232EIDR, or MAX3232ECDR, verify the exact package, temperature grade, ESD rating, and lead-free status rather than relying on the family name. Use a different manufacturer's device only when its complete pinout, capacitor connections, supply range, data rate, and environmental requirements have been confirmed. For new designs, follow the manufacturer reference circuit and capacitor values, and validate charge-pump ripple at the highest intended load and data rate.

Vergleich mit Alternativen

Parameter Dieses Produkt MAX3232ESE+ MAX3232ECSE+ MAX3232EEAE+ MAX3232EIDR MAX3232ECDR
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Package 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC 16-SOIC
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 1Mbps 1Mbps 1Mbps 1Mbps 1Mbps 1Mbps
Transceiver Configuration 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver 1 transmitter and 1 receiver
Charge-Pump Architecture Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump Dual charge pump
Special Ordering Feature MAX3232ICSE ordering code E-series ordering code EC-series ordering code Enhanced E-series ordering code E-series SOIC ordering code EC-series SOIC ordering code

Wichtigste Unterscheidungsmerkmale

  • Single-voltage implementation (vs. MAX3232EIDR)
  • True RS-232 integration (vs. MAX3232ESE+)
  • Family sourcing continuity (vs. MAX3232ECDR)

Designhinweise

Place the four charge-pump capacitors and the local supply bypass capacitor close to the MAX3232ICSE pins. Keep capacitor loops compact, connect the ground side to a low-impedance ground plane region, and avoid routing the high-current charge-pump return through sensitive analog return paths. The exact capacitance, tolerance, dielectric, and voltage rating must follow the manufacturer application guidance.

Separate the RS-232 connector-side nets from UART, clock, sensor, and reference signals. Route the TX and RX paths away from high-impedance analog inputs, and provide a direct return from the connector ground to the transceiver ground. If the connector is exposed to user-accessible cables, use the manufacturer ESD-protection circuit near the connector and control chassis-to-board grounding.

Do not treat every MAX3232 ordering suffix as automatically interchangeable. Verify the package drawing, pin names, operating-temperature range, lead-free status, and charge-pump capacitor values against the exact manufacturer data sheet. Also avoid assuming that a connector-side driver is inactive when no cable is attached; standard RS-232 outputs can remain active and draw additional supply current.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The MAX3232 family documentation identifies ±15kV ESD protection, but no verified RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was printed for the exact MAX3232ICSE ordering suffix.

Ähnliche Suchanfragen

MAX3232ICSE datasheet MAX3232ICSE pinout MAX3232ICSE datasheet pdf MAX3232ICSE equivalent MAX3232ICSE replacement MAX3232ICSE cross reference MAX3232ICSE vs MAX3232EIDR MAX3232ICSE price MAX3232ICSE stock Maxim Integrated MAX3232ICSE MAX3232ICSE 16-SOIC pinout MAX3232ICSE UART to RS-232 3.0V 1Mbps RS-232 MAX3232ICSE what replaces MAX3232ICSE

Verwandte Bauteile & Begriffe

Maxim Integrated MAX3232ICSE MAX3232ESE+ MAX3232ECSE+ MAX3232EEAE+ MAX3232EIDR MAX3232ECDR RS-232 true RS-232 transceiver line driver line receiver interface IC UART dual charge pump charge-pump capacitor 3.3V logic 1Mbps data rate 16-SOIC SOIC package family surface mount ESD protection industrial communication data acquisition test and measurement
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen