MC908GR16ACFAE - 8-bit MCU, 16KB Flash, 48-LQFP | NXP
Teilenummer: MC908GR16ACFAE ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $13.19 | $13,19 |
| 10 | $11.92 | $119,20 |
| 100 | $9.85 | $985,00 |
| 500 | $8.3 | $4.150,00 |
| 1.000 | $7.1 | $7.100,00 |
MC908GR16ACFAE Übersicht
A microcontroller (MCU) is a single-chip computer that integrates a CPU, memory (FLASH for program storage, RAM for data), timers, communication peripherals, and I/O pins. The HC08 family represents NXP's low-cost, high-performance 8-bit architecture positioned as a general-purpose device family targeted to consumer and industrial applications. Within the broader semiconductor hierarchy, microcontrollers sit under microprocessors and embedded processors, and the 8-bit segment remains vital for cost-sensitive, deterministic control tasks such as appliance control, sensor reading, and human-machine interface handling.
Key features of the MC908GR16ACFAE include 16KB FLASH program memory, 1KB RAM, an internal oscillator that simplifies BOM by removing the external crystal in many designs, multiple timer channels, an analog-to-digital converter, and serial communication peripherals (SCI/SPI). The internal oscillator type removes the requirement for an external clock source in cost-sensitive designs. Operating voltage range typically spans 2.7V to 5.5V and operating temperature range covers -40C to +85C industrial grade.
The device uses a single-voltage FLASH programming model and includes on-chip in-system programming (ISP) support, enabling firmware updates via the serial monitor ROM. It also integrates a watchdog timer, low-voltage detect (LVD), and multiple interrupt sources. The 48-LQFP package offers a compact 7x7 mm footprint with sufficient I/O for mid-complexity applications.
Typical applications include white goods and home appliances, HVAC control systems, industrial sensors and simple motor drives, security keypads and access panels, automotive body electronics (non-safety), consumer electronics remote controls, and battery chargers. Designers often choose the MC908GR16ACFAE when a proven 8-bit architecture with reliable toolchain support is preferred over migrating to a more complex 32-bit MCU.
When designing with this part, ensure ISP programming pins are accessible on the production board for firmware updates. Verify the internal oscillator accuracy against timing-critical UART baud-rate requirements; an external crystal may be needed for high-speed or long-distance serial communications.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes curated for engineers maintaining legacy HC08 designs or performing EOL risk-replacement analysis not found in the standalone manufacturer datasheet.
Drop-in-Alternativen für MC908GR16ACFAE – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC908GR16ACFAE (gleiche Bauform und Footprint) – abweichend in Core Architecture, Family, Operating Temperature Range, Package, Program Memory.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MC908GR16CFAE
✅ Drop-In✓ Auf Lager
$11.95 / Stück
Datenblatt ansehen →MC908GR32ACFAE
✅ Drop-In✓ Auf Lager
$8.75 / Stück
Datenblatt ansehen →MC908GR32CFAE
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MC908GZ16MFAE
✅ Drop-In✓ Auf Lager
$7.9001 / Stück
Datenblatt ansehen →MC908GR16ACFAE Grenzwerte & elektrische Eigenschaften
| Core Architecture | M68HC08 (CPU08) |
| Datenbusbreite | 8 bit |
| Program Memory Size | 16 KB (16K x 8) FLASH |
| RAM Size | 1 KB (1K x 8) |
| Maximum CPU Clock Frequency | 8 MHz |
| Number of I/O Lines | 37 |
| Gehäuse / Bauform | 48-LQFP (7x7 mm) |
| Montageart | Surface Mount |
| Oscillator Type | Internal |
| Program Memory Type | FLASH |
| Betriebsversorgungsspannung | 2.7 V to 5.5 V |
| Betriebstemperaturbereich | -40 C to +85 C |
| Peripherals | SCI, SPI, ADC, Timers, Watchdog |
| Connectivity | SCI, SPI |
| Packaging | Tray |
| RoHS-Status | Compliant |
| Family | MC68HC08G |
MC908GR16ACFAE 48-lqfp (7x7 mm) Pinbelegungsleitfaden
Pinbelegung für MC908GR16ACFAE (48-lqfp (7x7 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC908GR16ACFAE.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC908GR16ACFAE ist geeignet für 6 Anwendungs: White Goods and Home Appliance Control, HVAC Control Systems, Industrial Sensor Modules, Security Keypads and Access Panels, Consumer Electronics Remote Controls, Battery Chargers for Handheld Tools.
White Goods and Home Appliance Control
The MC908GR16ACFAE fits white goods and home appliance control boards such as washing machines, dishwashers, and microwave ovens. Its 16KB FLASH comfortably stores appliance state-machine firmware (wash cycles, motor profiles, sensor calibration) while 1KB RAM handles small data buffers and the 37 I/O lines connect directly to keypads, LED indicators, relay drivers, and triac outputs. The internal oscillator eliminates an external crystal on the main board for cost reduction. At 8 MHz CPU speed the part handles real-time motor control and user-interface polling with deterministic latency. AEC-Q100 is not required for indoor appliances. Pair the MCU with discrete relay drivers and an optocoupler-isolated triac circuit for line-voltage loads.
Empfohlen
HVAC Control Systems
The MC908GR16ACFAE is well-suited for HVAC control boards including thermostats, fan controllers, and zone valves. Its 2.7V to 5.5V supply range supports both 3.3V and 5V HVAC system rails, and the on-chip ADC reads temperature sensors (NTC thermistors) directly. The 37 I/O lines accommodate multiple relay outputs for compressor, fan, and heat-pump reversing valve control. Internal watchdog timer and brown-out detect add reliability against long-term industrial environmental stress. Use it for non-connected thermostats; for Wi-Fi/Bluetooth-enabled smart thermostats migrate to a Cortex-M0+ part.
Empfohlen
Industrial Sensor Modules
The MC908GR16ACFAE serves as the brain of low-cost industrial sensor modules such as proximity sensors, photoelectric switches, and level meters. Its internal oscillator removes the need for a precision crystal in timing-tolerant designs, and the 16KB FLASH holds simple Modbus or proprietary protocol stacks. SCI peripheral enables RS-485/RS-232 industrial fieldbus connection. The 1KB RAM is sufficient for sensor data buffering and command parsing. The industrial -40C to +85C temperature range supports factory floor deployment.
Empfohlen
Security Keypads and Access Panels
The MC908GR16ACFAE powers security keypads, RFID access panels, and alarm-system sub-controllers. Its 37 I/O lines drive matrix keypads (4x4 or larger), LED status bars, buzzer outputs, and relay contacts for door strikes. 16KB FLASH stores access lists, PIN hashes, and event logs; 1KB RAM handles real-time buffer for keypad scanning. Watchdog timer detects firmware hang conditions which is critical for unattended security hardware. Internal oscillator is sufficient for keypad-scan timing; an external crystal is recommended only if the panel hosts an RF transceiver.
Empfohlen
Consumer Electronics Remote Controls
The MC908GR16ACFAE is a good fit for universal remote controls, fan remote controllers, and AV receiver front panels. Low cost, small LQFP-48 footprint, and the internal oscillator simplify PCB design and BOM. 16KB FLASH holds IR protocol libraries (RC5, NEC, SIRC), device code databases, and LCD-segment driving routines. SCI/SPI allows firmware flashing during production. Operating temperature -40C to +85C handles indoor and outdoor installations such as patio fan remotes.
Empfohlen
Battery Chargers for Handheld Tools
The MC908GR16ACFAE controls NiCd, NiMH, and basic Li-ion battery chargers for handheld power tools and consumer battery packs. Its ADC reads battery voltage and current-sense amplifiers; PWM outputs drive the charging MOSFET. 16KB FLASH stores CC/CV charging profiles and safety timer logic. Internal oscillator and watchdog timer ensure reliable long-duration charging cycles. Designers prefer this part for replacement boards of legacy tool platforms still in production.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC908GR16ACFAE – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC908GR16CFAE | MC908GR32ACFAE | MC908GR32CFAE | MC908GZ16MFAE |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 48-LQFP (7x7 mm) | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same | 48-LQFP (7x7 mm) - same |
| Core / Architecture | M68HC08 (CPU08) 8-bit | M68HC08 (CPU08) 8-bit - same | M68HC08 (CPU08) 8-bit - same | M68HC08 (CPU08) 8-bit - same | M68HC08 (CPU08) 8-bit - same |
| CPU Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 8 MHz |
| FLASH Program Memory | 16 KB | 16 KB | 32 KB (+100%) | 32 KB (+100%) | 16 KB |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| Number of I/O Lines | 37 | 37 | 37 | 37 | 37 |
| CAN Peripheral | No | No | No | No | Yes (adds CAN, different peripheral map) |
Wichtigste Unterscheidungsmerkmale
- On-chip FLASH with ISP support (vs. Older HC05 mask-ROM MCUs)
- Internal oscillator (vs. MC908GZ16MFAE (CAN variant))
- Same-footprint 32KB upgrade path (vs. MC908GR32ACFAE)
Designhinweise
Place a 0.1 uF ceramic decoupling capacitor within 5 mm of each VDD/VSS pin pair. The MC908GR16ACFAE draws brief current spikes during FLASH programming; add a 10 uF bulk capacitor near the supply pins. The internal voltage regulator requires a stable input - avoid sharing the decoupling capacitor with high-current digital loads such as relay coils.
Route the BKGD (background debug mode) pin to a programming header accessible on the production board, or expose test points. Without ISP access, firmware updates require removing the MCU. Keep analog signals (ADC inputs) away from switching nodes (PWMs, relay drivers) on the PCB layer stack-up to avoid coupling noise into ADC readings.
Do not assume the internal oscillator provides UART-grade accuracy across temperature. For SCI baud rates above 38400 or for SCI over RS-485 networks, add an external crystal. Verify that the COP watchdog is enabled in firmware - factory default leaves it disabled, but unattended industrial designs must enable the watchdog for fail-safe recovery.
The 48-LQFP package has a 0.5 mm lead pitch requiring fine-pitch PCB design rules. Use 0.2 mm trace/space with microvia stack-up if available; if not, route signal traces on outer layers with conservative clearances. The exposed pad (if present) must be soldered to the ground plane for thermal dissipation. Both figure-of-merit and ESD performance improve with a continuous ground pour beneath the MCU.
Compliance-Informationen
RoHS compliant per NXP product page. AEC-Q100 not qualified - target consumer/industrial use. Halogen-free status not stated in distributor data; assume yes for industrial markets. EOL notice requires sourcing via authorized after-market suppliers such as Rochester Electronics.