MC9S08QD2VPC - 8-Bit 16MHz 2KB Flash MCU | NXP
Teilenummer: MC9S08QD2VPC ✓ AktivMC9S08QD2VPC Übersicht
An 8-bit microcontroller is a programmable semiconductor containing a central processing unit, memory, input/output ports, and support logic on one integrated circuit. Within the product hierarchy, this device belongs to the embedded microcontroller class, combines an S08 CPU core with Flash program storage, and serves as the control element in a larger embedded system. Its small pin count makes it especially appropriate for simple appliances, sensor interfaces, compact instruments, and basic industrial controllers where system complexity is modest.
Key device characteristics include a maximum operating frequency of 16 MHz, an 8 MHz bus, 2 KB of Flash memory organized as 2K x 8, and a stated 128 x 8 memory configuration. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V systems. An 8-pin PDIP package also simplifies breadboard prototyping, through-hole inspection, and hand-repair workflows while providing a larger lead pitch than fine-pitch surface-mount packages.
The S08 family uses a CISC instruction architecture and provides a compact platform for event-driven control applications. Operating the CPU at 16 MHz while using an 8 MHz bus provides a balance between processing headroom and simpler peripheral integration. Flash memory allows firmware to be retained in the device and programmed during manufacturing or subsequent updates. Exact RAM size, ADC resources, timer counts, and I/O assignments should be confirmed from the manufacturer datasheet before final hardware design.
Typical uses include small motor or relay controllers, temperature and level sensing interfaces, LED status panels, simple keypads, low-speed communication nodes, and dedicated control boards for household or industrial equipment. The DIP format is particularly useful when a design must be manually assembled, prototyped rapidly, or serviced with through-hole components. It is less suitable when board area or mounting density is the primary constraint.
Designers should reserve the device pins for power, ground, reset, programming, clock, and the required I/O functions according to the datasheet. Place bypass capacitance close to the supply pins, keep programming and debug connections accessible, and confirm all unused inputs have defined levels. Because detailed peripheral and timing parameters are not reproduced on this page, use the manufacturer datasheet as the controlling source for register definitions and electrical limits.
This page combines the exact core specifications, package information, comparison points, and engineering guidance needed to evaluate the MC9S08QD2VPC. It also separates confirmed device data from parameters that require datasheet verification, helping designers select the MCU while avoiding unsupported assumptions about memory, conversion, timing, and environmental performance.
Drop-in-Alternativen für MC9S08QD2VPC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08QD2VPC (gleiche Bauform und Footprint) – abweichend in Maximum CPU Frequency, Mounting Type, Package.
MC9S08QD4VPC
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →MC9S08QD2VPC Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit S08 microcontroller |
| CPU Architecture | CISC |
| Maximum CPU Frequency | 16 MHz |
| Bus Frequency | 8 MHz |
| Internal Flash Memory | 2 KB (2K x 8) |
| Memory Configuration | 128 x 8 |
| Betriebsversorgungsspannung | 2.7 V to 5.5 V |
| Nominal Supply Levels | 3.3 V / 5 V |
| Gehäuse | 8-pin PDIP |
| Montageart | Through-hole |
| Packaging | Tube |
| Program Memory Type | Flash |
MC9S08QD2VPC 8-pin pdip Pinbelegungsleitfaden
Pinbelegung für MC9S08QD2VPC (8-pin pdip-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08QD2VPC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S08QD2VPC ist geeignet für 6 Anwendungs: Compact Appliance Controller, Temperature and Level Sensor Interface, LED Status and Relay Control, Basic Keypad and Panel Interface, Low-Speed Communication Node, Educational and Prototype Controller.
Compact Appliance Controller
The MC9S08QD2VPC fits compact appliance control because its 16 MHz S08 CPU provides processing headroom for button handling, state-machine logic, timers, and actuator coordination. Its 2 KB of Flash is suitable for tightly organized control firmware, while the 2.7 V to 5.5 V supply range supports common 3.3 V and 5 V power architectures. The 8-pin PDIP package also makes the controller practical for cost-sensitive products assembled through holes. Before finalizing the design, confirm that the required I/O count, timers, and code size remain within the device limits and that every unused input is given a defined electrical state.
Empfohlen
Temperature and Level Sensor Interface
The MC9S08QD2VPC can supervise simple resistive, contact, or digital sensors when the acquisition and filtering requirements fit its limited I/O and memory budget. The 16 MHz CPU supports responsive sampling and threshold logic, while the 8 MHz bus provides a straightforward peripheral interface. Its 2.7 V to 5.5 V operating range allows operation from regulated 3.3 V or 5 V rails. For analog sensors requiring more than a basic interface, verify the availability, resolution, and sampling behavior of the conversion resources before committing the layout. Firmware should include sensor diagnostics, debouncing, and safe output states for out-of-range measurements.
Empfohlen
LED Status and Relay Control
For LED status panels, relay drivers, and small sequencing boards, the MC9S08QD2VPC can execute deterministic control logic, timing sequences, and fault monitoring within its 2 KB Flash limit. The 16 MHz maximum CPU frequency allows useful interrupt-driven responsiveness, and the 8-pin PDIP format simplifies prototyping and manual rework. Its 2.7 V to 5.5 V range is compatible with common embedded supply rails. Engineers should calculate transistor or relay-driver current from the device I/O limits, use appropriate protection against inductive transients, and ensure that firmware defaults every output to a safe inactive state during reset and startup.
Empfohlen
Basic Keypad and Panel Interface
The MC9S08QD2VPC is appropriate for a basic keypad, selector switch, or operator panel that requires debouncing, mode selection, and simple status feedback. The CISC-based S08 architecture is suitable for straightforward event-driven firmware, while 2 KB of Flash can hold a compact control application and lookup tables. The through-hole 8-pin PDIP package makes temporary switches, LEDs, and test points easy to access during development. Confirm that the matrix or switch count fits the available pins, design debouncing for the mechanical contact behavior, and keep external pull resistors close enough to minimize susceptibility to electrostatic discharge and wiring noise.
Empfohlen
Low-Speed Communication Node
The MC9S08QD2VPC can serve as a small node in a sensor network or local control link when the protocol implementation, packet processing, and diagnostics fit within 2 KB of Flash. Its 16 MHz CPU and 8 MHz bus support interrupt-driven communication routines, while the limited 8-pin package can support a compact serial interface, status signaling, and supply input. The 2.7 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. The actual UART, SPI, or other serial peripheral resources must be confirmed in the manufacturer datasheet, and the physical layer should include correct logic levels, termination, and ESD protection.
Empfohlen
Educational and Prototype Controller
The MC9S08QD2VPC is well suited to breadboard-based instruction and prototype development because its 8-pin PDIP package is easy to insert, probe, and replace. The 16 MHz S08 core allows students or engineers to demonstrate interrupts, timers, port control, memory usage, and embedded state machines with a compact device. Its 2 KB Flash capacity encourages disciplined firmware organization, and the 2.7 V to 5.5 V range permits common laboratory supply arrangements. Use a regulated supply, add local bypass capacitance, follow the programming and reset connections in the datasheet, and remove unused exposed connections so the prototype behaves predictably during fault-injection tests.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08QD2VPC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MC9S08QD4VPC |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Package | 8-pin PDIP | 8-pin PDIP |
| CPU Architecture | 8-bit S08 CISC | Enhanced HCS08 CISC |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Bus Frequency | 8 MHz | 8 MHz |
| Internal Flash Memory | 2 KB (2K x 8) | 4 KB |
Wichtigste Unterscheidungsmerkmale
- Lower Flash capacity supports cost-conscious designs with a tightly bounded firmware image (vs. MC9S08QD4VPC)
- Compact MCU option with 16 MHz execution and an 8 MHz bus (vs. MC9S08QD4VPC)
- Low-pin-count through-hole package simplifies manual assembly (vs. MC9S08QD4VPC)
Designhinweise
Follow the manufacturer package drawing and pin-description table when assigning the eight PDIP connections. Place the required supply bypass capacitor close to the device power pins, with a short return path to ground. Confirm which pins are used for programming, reset, clocking, and I/O before final routing; a wrong assignment can prevent programming even when the electrical components are otherwise correct.
Design the supply for the device's stated 2.7 V to 5.5 V operating range and include margin for startup, load transients, and temperature variation. Use separate paths for sensitive signal wiring and switching or relay loads. Add decoupling near the IC, maintain a common return reference where appropriate, and use protection components with voltage and current ratings suitable for the actual rail and wiring environment.
Do not treat a related MPN as a drop-in replacement without checking its pin map, memory map, interrupt vectors, and peripheral resources. The MC9S08QD4VPC has 4 KB of Flash compared with 2 KB for the MC9S08QD2VPC and includes a documented ADC, so software assumptions and board dependencies may change. Verify startup behavior, unused-pin states, and code-size growth before accepting any substitution.
Keep the 8-pin PDIP footprint away from high-current switching paths, transformers, and long unprotected cable routes. Route reset and programming signals away from noisy motor or relay wiring, and provide a stable clock source where required. If the controller drives inductive loads, use separate driver devices and appropriate transient suppression rather than relying on MCU pins to absorb switching energy.
Compliance-Informationen
Compliance and automotive-qualification attributes are not stated in the available product listings and must be confirmed through current manufacturer documentation before production release.
