MC9S08QE4CWL - 20MHz 8-Bit Flash MCU | NXP | Embedded Control
Teilenummer: MC9S08QE4CWL ✗ AbgekündigtMC9S08QE4CWL Übersicht
A microcontroller is a programmable semiconductor that integrates a CPU, memory, input/output ports, timers, communication interfaces, and supporting peripherals on one device. The S08 architecture belongs to the 8-bit microcontroller hierarchy within embedded processors. MC9S08QE4CWL targets applications in which modest processing throughput, compact code storage, USB communications, and low system cost are more important than the performance and memory capacity of a 32-bit MCU.
The principal device characteristics include 8-bit processing, a 20 MHz clock, 4 KB of Flash memory, and a 28-SOIC package. Flash memory retains programmed code when power is removed and supports field-programmable updates when the relevant interface and software are available. The 1.8 V to 3.6 V supply range permits operation from low-voltage 3.3 V systems, while the SOIC package supports conventional surface-mount assembly and hand-soldering or automated PCB assembly.
The S08QE family combines an 8-bit member with a pin-compatible 32-bit family, allowing engineers to reuse hardware concepts during product migrations while evaluating software and peripheral compatibility. Its USB capability is useful for connecting a compact embedded product to a host computer or USB infrastructure. The 4 KB Flash capacity supports small control routines, state machines, communication handling, and basic peripheral coordination rather than large graphical applications or extensive protocol stacks.
Typical uses include USB-connected control accessories, compact consumer interfaces, simple data-collection terminals, configuration tools, and low-cost embedded products. The 20 MHz CPU allows responsive polling and control-loop execution, while the integrated USB interface can reduce the need for a separate USB bridge in suitable USB-device designs.
Circuit design should account for the 1.8 V to 3.6 V supply range, validate USB signal routing against the manufacturer reference design, and provide suitable decoupling near the device. Because the MCU is no longer promoted as a new design choice, engineers should confirm availability, lifecycle status, and any approved successor before committing to a new production release.
This page consolidates the device identity, electrical specifications, lifecycle information, drop-in replacement assessment, application guidance, and engineering design notes into one practical reference for embedded-product designers evaluating the MC9S08QE4CWL.
Drop-in-Alternativen für MC9S08QE4CWL – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MC9S08QE4CWL (gleiche Bauform und Footprint) – abweichend in Mounting Type, Debug Interface, Family, I/O Pins, Package.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernMC9S08QE4CWL Grenzwerte & elektrische Eigenschaften
| Manufacturer | NXP Semiconductors |
| Product Type | 8-bit microcontroller |
| Product Series | S08QE |
| CPU Architecture | 8-bit HCS08 |
| Maximum CPU Clock Speed | 20 MHz |
| Flash Memory | 4 KB (4K x 8) |
| Program Memory Type | Flash |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Package Type | 28-pin SOIC |
| Total Pin Count | 28 pins |
| I/O Port Count | 28 I/Os |
| Montageart | Surface mount |
| USB Connectivity | Integrated USB |
| Power Class | Low-power embedded MCU |
| Lebenszyklusstatus | End of life |
MC9S08QE4CWL 28-pin soic Pinbelegungsleitfaden
Pinbelegung für MC9S08QE4CWL (28-pin soic-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MC9S08QE4CWL.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MC9S08QE4CWL ist geeignet für 6 Anwendungs: USB-connected control accessory, Compact industrial data collector, USB configuration tool, Low-voltage embedded interface, Consumer peripheral controller, Legacy product maintenance and repair.
USB-connected control accessory
The MC9S08QE4CWL fits a compact USB control accessory because it combines a 20 MHz 8-bit CPU, 4 KB of Flash, and integrated USB connectivity in a 28-pin SOIC package. The MCU can manage device enumeration, command handling, status LEDs, and simple user inputs while remaining within the compact power envelope associated with low-voltage embedded designs. Its 4 KB Flash limit requires disciplined firmware organization, so diagnostic logging and large protocol stacks should be minimized. USB routing, power sequencing, connector protection, and device-class behavior should follow the NXP reference implementation and the manufacturer's recommended decoupling arrangement.
Empfohlen
Compact industrial data collector
The MC9S08QE4CWL can serve as the local controller in a small industrial data-collection product that must fit into a 1.8 V to 3.6 V power budget. Its 20 MHz HCS08 CPU can service sensor polling, status logic, and a compact configuration interface, while 4 KB of Flash provides enough storage for a focused application rather than a large analytics program. The SOIC package is practical for conventional PCB assembly and rework. Before deployment, verify the device's documented temperature limits, isolation requirements, and communication behavior, because the available product information does not establish an industrial qualification grade.
Empfohlen
USB configuration tool
The MC9S08QE4CWL is appropriate for a PC-connected configuration tool with a small user interface and limited on-device storage. At 20 MHz, the 8-bit processor can support command parsing, front-panel state management, and periodic status updates, while integrated USB removes the need for a separate serial interface when the product can operate as a USB device. The 4 KB Flash capacity favors firmware dedicated to configuration, identification, and a narrow command set. Use the manufacturer's USB implementation details to select the connector, series resistors, cable routing, and power-supply arrangement for reliable enumeration.
Empfohlen
Low-voltage embedded interface
The MC9S08QE4CWL suits a low-voltage embedded interface requiring moderate control performance in limited board space. Its 1.8 V to 3.6 V supply range supports 3.3 V system rails, the 20 MHz CPU provides useful responsiveness for protocol handling and state machines, and the 28-pin SOIC package offers a manageable assembly format. The 4 KB Flash footprint requires code-size budgeting during firmware planning. Confirm all I/O levels and timing assumptions against the manufacturer data sheet, and avoid designs that require substantially more code memory, RAM, or computational throughput than this MCU family provides.
Empfohlen
Consumer peripheral controller
The MC9S08QE4CWL can act as the central controller in a compact consumer peripheral where USB connectivity, low cost, and a small package matter more than high computational throughput. The MCU can supervise buttons, indicators, an external EEPROM, or a limited protocol bridge while running from a 3.3 V rail. Integrated USB and a 20 MHz 8-bit core support responsive host interaction, while the 28-pin SOIC package simplifies conventional surface-mount assembly. Firmware should be kept within the 4 KB Flash constraint, and USB enumeration, power consumption, ESD protection, and connector implementation should be validated against the manufacturer guidance.
Empfohlen
Legacy product maintenance and repair
The MC9S08QE4CWL is particularly useful for maintaining an established S08QE product where changing the MCU footprint, clock architecture, or firmware platform would disrupt a working design. Retaining the same 20 MHz 8-bit MCU, 4 KB Flash configuration, and 28-pin SOIC package can preserve board compatibility and reduce qualification effort. This is an end-of-life device, so procurement planning and software preservation are essential. Record the approved programmer settings, firmware revision, clock configuration, and peripheral initialization sequence, and use the manufacturer data sheet's pin and timing descriptions when diagnosing board-level failures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MC9S08QE4CWL – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Designhinweise
Design the supply rail within the documented 1.8 V to 3.6 V operating range, including startup and transient margins. Place the manufacturer's recommended decoupling capacitors close to the appropriate supply and ground pins, and keep switching regulators or USB circuitry away from sensitive analog and reference connections. Because no detailed regulator topology or capacitor schedule is reproduced here, use the device data sheet's recommended application circuit rather than applying a generic decoupling layout.
Route USB differential pairs as a controlled impedance pair with continuous reference planes, minimal stubs, and as little copper interruption as possible. Keep the USB connector and protection network positioned so their high-current transients do not pass through the MCU's quiet supply return. Follow the manufacturer reference layout for series resistors, capacitance, and branch placement, and verify the completed board with signal-integrity and USB compliance testing.
Do not treat a similar MC9S08QE4 suffix as proof of drop-in compatibility. Confirm that the replacement uses a 28-pin SOIC footprint with matching pin numbering, lead geometry, power pins, USB functions, and exposed thermal features. Also account for the 4 KB Flash ceiling, clock configuration, programming method, and peripheral initialization sequence. The end-of-life status makes formal lifecycle approval and supply planning part of the design process.
Reserve programming and test access consistent with the manufacturer's debug and programming interface recommendations. Keep test pads or headers accessible without creating signal-integrity risks on USB or high-speed communication nets. For an existing design, compare the replacement footprint against the original land pattern mechanically and electrically before ordering components; package height, lead pitch, pad length, and pin-one orientation must all agree.
Compliance-Informationen
The available manufacturer product information does not establish the requested compliance attributes. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status in the current manufacturer documentation before release.
