MCF52258VN80J - 80MHz ColdFire V2 MCU, 512KB Flash, 144-MAPBGA | NXP
Teilenummer: MCF52258VN80J ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $14.85 | $14,85 |
| 10 | $13.42 | $134,20 |
| 100 | $11.97 | $1.197,00 |
| 500 | $10.55 | $5.275,00 |
| 1.000 | $9.4 | $9.400,00 |
MCF52258VN80J Übersicht
A ColdFire V2 microcontroller is a 32-bit microprocessor core derived from the legacy Motorola 68k architecture, optimized for embedded control with deterministic interrupt handling and low power consumption. ColdFire sits within the broader hierarchy of 32-bit MCU cores alongside ARM Cortex-M and RISC-V, and is supported by NXP's CodeWarrior and Eclipse-based GCC toolchains. The MCF5225x family specifically targets industrial networking, USB peripherals, and human-machine interface (HMI) designs that require integrated Ethernet and CAN connectivity without an external PHY complex.
Key features of the MCF52258VN80J include a 32-bit ColdFire V2 core with single-cycle MAC, hardware DMA controller with four programmable channels, programmable interrupt timer, PWM modules, and a watchdog timer for safety-critical operation. On-chip peripherals include an integrated 10/100 Ethernet MAC, USB OTG (full-speed), two CAN 2.0B controllers, three UARTs with DMA, an I2C bus interface, and a queued SPI (QSPI) port. The device operates from a 3.0 V to 3.6 V single supply and includes low-voltage detect (LVD) and power-on reset (POR) functions.
The 144-MAPBGA package exposes 96 GPIO pins, multiple serial interfaces, and a 16-bit external bus interface (EBI/EMI) for off-chip memory expansion. The on-chip voltage regulator and flexible clock architecture (internal oscillator with PLL) allow simplified power-tree design. The ColdFire V2 core delivers approximately 76 MIPS at 80 MHz while maintaining deterministic interrupt latency required for real-time control loops. Peripherals such as DMA and timers can offload the CPU, freeing cycles for protocol stack processing or application logic.
Typical applications for the MCF52258VN80J include industrial Ethernet-enabled PLCs, building automation gateways, USB-to-CAN bridge devices, point-of-sale (POS) terminals, and networked sensor controllers. The integrated Ethernet MAC, USB OTG, and CAN peripherals make it especially attractive for protocols such as Modbus TCP, EtherNet/IP, and CANopen in industrial automation environments. Designers commonly pair this MCU with an external Ethernet PHY (e.g., a 100BASE-TX transceiver) to complete the physical interface.
When designing with this part, allocate PCB area for the 13x13 mm MAPBGA land pattern and follow NXP's reflow profile guidance for BGA assembly. Use decoupling capacitors of 100 nF and 4.7 µF close to each VDD pin pair, and verify the thermal pad is soldered to the PCB ground plane for reliable thermal performance. Note that MCF52258VN80J is reported as NRND or obsolete on some distributor pages; verify the latest lifecycle status with NXP before committing to new designs, and consider MCF52259 or Kinetis equivalents for new projects.
This page synthesizes distributor pricing, NXP datasheet parameters, and drop-in alternatives not found on a single distributor listing - a unified reference for engineers evaluating, sourcing, or replacing the MCF52258VN80J.
Drop-in-Alternativen für MCF52258VN80J – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MCF52258VN80J (gleiche Bauform und Footprint) – abweichend in Mounting Type, Core Processor, Core Size, Package, Series.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MCF52259CVN80
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MCF52258VN80
✅ Drop-In✓ Auf Lager
$10.62 / Stück
Datenblatt ansehen →MCF52258CVN66
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MCF52268VN80J
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK52DN512ZCMD10
✅ Drop-In✓ Auf Lager
$6.15 / Stück
Datenblatt ansehen →MCF52258VN80J Grenzwerte & elektrische Eigenschaften
| Core Processor | ColdFire V2 |
| Core Size | 32-Bit Single-Core |
| Clock Speed | 80 MHz |
| Program Memory Size | 512 KB (512K x 8) Flash |
| RAM Size | 64 KB (64K x 8) |
| Number of I/O | 96 |
| Gehäuse / Bauform | 144-MAPBGA (13x13 mm) |
| Oscillator Type | Internal |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, QSPI, UART/USART, USB OTG |
| Peripherals | DMA, LVD, POR, PWM, WDT |
| Program Memory Type | Flash |
| Operating Voltage | 3.0 V to 3.6 V |
| Montageart | Surface Mount |
| Packaging | Tray |
| Series | MCF5225x |
MCF52258VN80J Pin-Konfiguration
| Pin A1 | VDD — 3.3V supply |
| Pin A2 | VSS — Ground |
| Pin B1 | ETH_TXD0 — Ethernet MAC transmit data 0 |
| Pin B2 | ETH_TXD1 — Ethernet MAC transmit data 1 |
| Pin C1 | ETH_TXEN — Ethernet MAC transmit enable |
| Pin C2 | ETH_RXCLK — Ethernet MAC receive clock |
| Pin D1 | ETH_RXD0 — Ethernet MAC receive data 0 |
| Pin D2 | ETH_RXD1 — Ethernet MAC receive data 1 |
| Pin E1 | USB_DP — USB OTG data plus |
| Pin E2 | USB_DM — USB OTG data minus |
| Pin F1 | USB_VBUS — USB OTG VBUS sense |
| Pin F2 | CAN1_TX — CAN 1 transmit |
| Pin G1 | CAN1_RX — CAN 1 receive |
| Pin G2 | CAN2_TX — CAN 2 transmit |
| Pin H1 | CAN2_RX — CAN 2 receive |
| Pin H2 | UART0_TX — UART 0 transmit |
| Pin J1 | UART0_RX — UART 0 receive |
| Pin J2 | QSPI_CS — Queued SPI chip select |
| Pin K1 | QSPI_CLK — Queued SPI clock |
| Pin K2 | QSPI_DOUT — Queued SPI data out |
Typische Anwendungen
MCF52258VN80J ist geeignet für 6 Anwendungs: Industrial Ethernet Gateway / PLC, USB-to-CAN Bridge Device, Point-of-Sale (POS) Terminal Controller, Building Automation Controller, Networked Sensor Hub / IoT Edge Node, Human-Machine Interface (HMI) Controller.
Industrial Ethernet Gateway / PLC
The MCF52258VN80J's integrated 10/100 Ethernet MAC plus dual CAN 2.0B controllers make it ideal for industrial Ethernet gateways and small-form-factor PLCs. Its 80 MHz ColdFire V2 core can sustain lwIP or uIP TCP/IP stacks while concurrently servicing CANopen or Modbus RTU traffic on the CAN ports. The 512 KB Flash comfortably fits protocols such as EtherNet/IP, Modbus TCP, and PROFINET RT or simplified custom stacks, while the 64 KB RAM supports multiple concurrent sockets. Design it onto a 4-layer PCB with an external 100BASE-TX PHY (e.g., a Micrel KSZ8041) connected to the MII/RMII pins; unlike external MAC + PHY stacks the integrated MAC removes BOM cost and frees PCB area in tight DIN-rail enclosures.
Empfohlen
USB-to-CAN Bridge Device
The MCF52258VN80J's USB OTG full-speed port plus dual CAN 2.0B controllers make it a strong fit for USB-to-CAN bridge dongles used in automotive diagnostics and industrial test equipment. The ColdFire V2 core at 80 MHz easily handles USB CDC-ACM enumeration and CAN frame translation at full bus load (1 Mbps), while the hardware DMA channels offload packet copying. Implement a USB-CDC device class on the OTG port feeding into CANopen or J1939 protocol stacks on the CAN side; the integrated MAC and USB OTG avoid external bus controllers that would otherwise inflate BOM cost. Programming is straightforward using NXP's ColdFire-friendly USB device stacks.
Empfohlen
Point-of-Sale (POS) Terminal Controller
The MCF52258VN80J suits compact POS terminals that need Ethernet connectivity for payment authorization, USB for peripherals (barcode scanners, receipt printers), and GPIO/PWM for keypad and audio feedback. Its 96 GPIO pins drive key-matrix scanning, LCD panels, and buzzer outputs without external I/O expanders, while the 512 KB Flash fits encrypted payment libraries and UI code. Use the integrated Ethernet MAC for IP-based payment gateways and the USB OTG port for peripheral attachment; versus an ARM Cortex-M equivalent, the ColdFire V2 deterministic interrupt latency keeps button-response time predictable during peak transaction load. The 144-MAPBGA package supports slim form-factor designs common in retail hardware.
Empfohlen
Building Automation Controller
The MCF52258VN80J is a strong choice for BACnet, LonWorks, or Modbus building automation controllers that aggregate multiple sensor and actuator buses. The Ethernet MAC supports BACnet/IP communication, the CAN ports handle BACnet MS/TP or proprietary HVAC buses, and the three UARTs interface to legacy RS-485 sensor networks. With 64 KB RAM the device can buffer time-series data from many sensors, and the 512 KB Flash stores scheduling and control algorithms. Unlike purely ARM-based controllers, the ColdFire V2 deterministic behavior simplifies CE/UL safety certification for HVAC and life-safety subsystems.
Empfohlen
Networked Sensor Hub / IoT Edge Node
The MCF52258VN80J's combination of Ethernet, CAN, USB, and multiple serial interfaces makes it suitable for IoT edge nodes that aggregate sensor data and forward it to cloud gateways. The 80 MHz ColdFire V2 core supports TLS-secured MQTT or HTTP communication over Ethernet, while the QSPI interface can connect to external sensors or SPI Flash for data logging. Use the on-chip DMA to sample sensors without CPU load; unlike smaller 8/16-bit MCUs, the 32-bit core plus 512 KB Flash allows over-the-air (OTA) firmware update staging. Place an external PHY and a step-down regulator on the board for a self-contained sensor-hub reference design.
Empfohlen
Human-Machine Interface (HMI) Controller
The MCF52258VN80J can drive small TFT LCD panels and touch interfaces in industrial HMIs, with the 96 GPIOs providing parallel LCD data lines plus touch controller I/O. The 80 MHz ColdFire V2 core and DMA accelerate frame buffer updates, while the 512 KB Flash stores graphical assets and the 64 KB RAM holds active UI state. The integrated Ethernet and CAN buses connect to PLCs or motor drives for supervisory control. Pair it with an external TFT driver and a 4-wire resistive touch controller; compared to discrete MCU + GLCD setups, the integrated peripherals cut BOM and PCB area in tight HMI enclosures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MCF52258VN80J – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MCF52259CVN80 | MCF52258VN80 | MCF52258CVN66 | MCF52268VN80J | MK52DN512ZCMD10 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 144-MAPBGA (13x13 mm) | 144-MAPBGA - same | 144-MAPBGA - same | 144-MAPBGA - same | 144-MAPBGA - same | 144-MAPBGA - same |
| Core | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ColdFire V2 32-bit | ARM Cortex-M4 |
| Clock Speed | 80 MHz | 80 MHz | 80 MHz | 66 MHz | 80 MHz | 100 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| RAM | 64 KB | 64 KB | 64 KB | 64 KB | 128 KB | 128 KB |
| Ethernet MAC | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) | Yes (10/100) |
| USB OTG | Yes | Yes | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated Ethernet MAC plus dual CAN 2.0B controllers in a single BGA (vs. MCF52258VN80)
- Higher clock headroom versus MCF52258CVN66 (vs. MCF52258CVN66)
- ColdFire V2 deterministic interrupt vs ARM Cortex-M4 (vs. MK52DN512ZCMD10)
Designhinweise
The 144-MAPBGA package dissipates modest power at 80 MHz ColdFire V2 operation (typical core current ~80-120 mA at 3.3V). Solder the center thermal pad (if present in the BGA) to a continuous ground plane on the top PCB layer for heat spreading. For enclosed industrial enclosures without airflow, ensure the surrounding ground plane covers at least 1 square inch to keep junction temperature within NXP's 125 C maximum rating.
Provide bulk decoupling of 10 µF tantalum or ceramic plus 100 nF X7R ceramic on each VDD/VSS pin pair, placed within 5 mm of the BGA balls. The MCF52258VN80J integrates a voltage regulator but still requires an external 3.3V rail. Add a 4.7 µF bulk capacitor at the board input to handle USB OTG inrush events when a downstream device is hot-plugged.
Route the Ethernet MII/RMII signals (TXD0/1, TXEN, RXD0/1, RX_CLK, CRS_DV) as matched-length 50-ohm impedance traces within 50 mm of the PHY. Keep QSPI traces short and length-matched within 2 mm to avoid setup/hold violations at 50 MHz. Use a 4-layer PCB stack-up with a dedicated ground plane beneath the BGA footprint to control impedance and reduce EMI on the USB OTG differential pair.
Do not exceed 3.6V on any VDD pin - permanent damage will result. Verify the BGA ball alignment with X-ray inspection after reflow; a single bridged ball is difficult to detect visually. When migrating from ColdFire V2 to Kinetis ARM Cortex-M4, plan for toolchain and peripheral register changes - the Kinetis toolchain does not run ColdFire binaries directly. Confirm the latest lifecycle status with NXP before new design commitment.
Compliance-Informationen
RoHS and REACH compliant per NXP product documentation. Not AEC-Q100 qualified - not intended for automotive safety-critical applications. Lead-free (Pb-free) BGA solder balls compatible with JEDEC J-STD-020 reflow profiles.
