MK60DN512VMC10 - 100MHz Cortex-M4 MCU, 512KB Flash | NXP
Teilenummer: MK60DN512VMC10 ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
MK60DN512VMC10 Übersicht
A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, sitting at the device level of the embedded-systems hierarchy (MCU -> embedded processor -> semiconductor). The Kinetis K60 family belongs to NXP's K-series 32-bit MCUs and targets connected, mixed-signal applications where an Arm Cortex-M4 CPU, analog integration, and industrial networking must coexist on one die.
Key features of the MK60DN512VMC10 include the 100 MHz Cortex-M4 core with DSP instructions and a hardware floating-point-friendly pipeline for control loops, 512 KB (512K x 8) of on-chip flash program memory, and 128 KB of SRAM for data and stack. Connectivity spans CAN bus, EBI/EMI external bus, Ethernet, I2C, IrDA, SD, SPI, UART/USART, USB and USB OTG, while on-chip peripherals include DMA, I2S, low-voltage detection (LVD), power-on reset (POR), PWM and a watchdog timer (WDT). The device operates from 1.8 V, 2.5 V or 3.3 V supplies.
Technically, the K60 sub-family integrates a 16-channel ADC-class analog front end concept, IEEE 1588 precision time protocol support in its Ethernet MAC, and a crossbar architecture that lets the DMA service multiple masters concurrently. The 121-MAPBGA (8x8 mm) footprint keeps board area compact while exposing 86 GPIO/IO lines for system expansion.
Typical applications include industrial automation and motor control nodes requiring CAN and Ethernet, IEEE 1588 networked devices needing precision time synchronization, and USB-connected instrumentation using USB OTG. The combination of 100 MHz DSP capability and rich serial connectivity makes it a strong fit for gateways and data concentrators.
Design consideration: the MAP-BGA package requires controlled-impedance PCB layout with via fan-out under the 0.8 mm pitch ball field, so plan the 3.3 V power tree and decoupling network before routing; the alternate 100-LQFP family members exist for hand-solderable designs.
This page synthesizes distributor data, same-family drop-in alternatives, and practical design notes beyond what a single datasheet page provides.
Drop-in-Alternativen für MK60DN512VMC10 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MK60DN512VMC10 (gleiche Bauform und Footprint) – abweichend in Package, Mounting Type, Flash Memory, Supply Voltage, Family.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MK60DN512ZVMD10
✅ Drop-In✓ Auf Lager
$14.81 / Stück
Datenblatt ansehen →MK60DN256VMD10
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MK52DN512CMD10
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →MK51DN512ZCMC10
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK50DN512CMC10
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MK20DN512ZVMC10
✅ Drop-In✓ Auf Lager
$5.3 / Stück
Datenblatt ansehen →MK60DN512VMC10 Grenzwerte & elektrische Eigenschaften
| Core Processor | Arm Cortex-M4 |
| Core Size | 32-bit |
| Maximum Clock Speed | 100 MHz |
| Flash Memory | 512 KB (512K x 8) |
| SRAM | 128 KB |
| Versorgungsspannung | 1.8 V / 2.5 V / 3.3 V |
| Gehäuse | 121-MAPBGA (8x8 mm) |
| Number of I/O | 86 |
| Connectivity | CANbus, EBI/EMI, Ethernet, I2C, IrDA, SD, SPI, UART/USART, USB, USB OTG |
| Peripherals | DMA, I2S, LVD, POR, PWM, WDT |
| Networking Feature | IEEE 1588 Ethernet |
| Series | Kinetis K60 |
| Montageart | Surface Mount |
| Packaging | Tray |
| Part Status | Active |
MK60DN512VMC10 121-mapbga (8x8 mm) Pinbelegungsleitfaden
Pinbelegung für MK60DN512VMC10 (121-mapbga (8x8 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MK60DN512VMC10.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MK60DN512VMC10 ist geeignet für 6 Anwendungs: Industrial Automation and Control Nodes, IEEE 1588 Precision Time Networked Devices, USB-Connected Test and Measurement Instruments, Embedded Gateways and Data Concentrators, Motor Control with Industrial Networking, Medical and Portable Monitoring Devices.
Industrial Automation and Control Nodes
In factory automation, the MK60DN512VMC10 fits because its 100 MHz Arm Cortex-M4 core with DSP instructions executes deterministic control loops while the on-chip CAN bus interface links it directly to industrial fieldbus networks, and the EBI/EMI external bus expands I/O with FPGAs or parallel peripherals. Used as the main controller in PLC I/O modules and motion-control cards, the K60's 512 KB flash holds protocol stacks (CANopen, Modbus) plus application logic, and its 128 KB SRAM buffers network frames and control state. The 86 GPIO lines and PWM outputs drive actuators and sense limit switches, while DMA keeps real-time servicing independent of the CPU, maintaining loop jitter at microsecond scale on a single 3.3 V rail.
Empfohlen
IEEE 1588 Precision Time Networked Devices
The MK60DN512VMC10 is purpose-built for IEEE 1588 Precision Time Protocol applications: its K60 sub-family integrates an Ethernet MAC with IEEE 1588 hardware timestamping, allowing sub-microsecond clock synchronization across switches, base-station controllers and industrial measurement grids. Operating at 100 MHz, the Cortex-M4 core runs the PTP daemon while hardware capture units timestamp packets without CPU latency, a capability many general-purpose MCUs lack. The 121-MAPBGA (8x8 mm) footprint suits dense switch-line-card designs where 512 KB flash stores the dual-stack firmware (PTP plus management) and USB OTG provides local servicing access. Powered from a single 3.3 V supply, the device replaces discrete MCU-plus-PHY-timestamp logic, reducing BOM cost in smart-grid and telecom timing equipment.
Empfohlen
USB-Connected Test and Measurement Instruments
For benchtop instruments, data loggers and PC-connected sensors, the MK60DN512VMC10 offers Full-Speed USB plus USB OTG, so the same chip can enumerate as a device (virtual COM port, HID or bulk transfer) or host a USB memory stick for standalone logging. The 100 MHz Cortex-M4 pipeline sustains bulk USB throughput while the DMA controller streams ADC acquisition buffers into the 128 KB SRAM without processor stalls. The 512 KB flash accommodates USB stacks, calibration tables and a bootloader for field firmware updates over the same USB port. Because the device runs from 1.8 V/2.5 V/3.3 V, designers can match the analog front-end supply domain, and the 121-MAPBGA package conserves front-panel PCB area.
Empfohlen
Embedded Gateways and Data Concentrators
Building and energy gateways must bridge many serial protocols; the MK60DN512VMC10 provides UART/USART, SPI, I2C, CAN and Ethernet simultaneously on one 100 MHz Cortex-M4 die, making it a natural protocol-concentration hub. A typical design uses the 512 KB flash to hold multiple protocol stacks (e.g., Modbus RTU to TCP translation, DLMS, BACnet MS/TP), while 128 KB SRAM holds routing tables and packet buffers, and the DMA crossbar moves serial data between peripherals and memory without CPU intervention. SD-card connectivity gives local logging, and IEEE 1588 support allows the gateway to discipline network time for downstream meters. The 3.3 V, single-supply operation and 8x8 mm BGA suit compact DIN-rail and wall-mount gateway hardware.
Empfohlen
Motor Control with Industrial Networking
The MK60DN512VMC10 serves as a networked motor-control MCU: the 100 MHz Cortex-M4 with single-cycle MAC executes field-oriented control loops at 10-20 kHz update rates, on-chip PWM modules generate complementary six-step outputs with dead-time insertion, and LVD/POR/WDT peripherals guard against brown-out faults. Simultaneously, the CAN interface reports drive telemetry to the vehicle or factory bus, and the Ethernet option supports industrial Ethernet variants in higher-end drives. The 128 KB SRAM holds current-loop state, position observers and fault history, while 512 KB flash stores multiple drive profiles and a field-updatable firmware image. Running from 3.3 V, the K60 interfaces directly with gate-driver logic level shifters and rotary-encoder inputs through its 86 GPIO.
Empfohlen
Medical and Portable Monitoring Devices
In portable patient monitors and diagnostic handhelds, the MK60DN512VMC10 balances compute and connectivity: the 100 MHz Cortex-M4 performs digital filtering and FFT analysis of biosignals, the I2S peripheral routes audio alarms and stethoscope-class signals, and USB OTG uploads records to clinical PCs without a separate bridge chip. The 1.8 V core operation reduces dynamic power relative to fixed-3.3 V-only MCUs, extending battery runtime in the display-and-acquisition section, while 512 KB flash retains calibration data and multiple waveform-analysis firmware images. The compact 121-MAPBGA (8x8 mm) footprint keeps handheld PCBs small, and the Ethernet variant supports networked bedside monitoring stations where IEEE 1588 time-stamps multi-device physiological records.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MK60DN512VMC10 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MK60DN512ZVMD10 | MK60DN256VMD10 | MK52DN512CMD10 | MK50DN512CMC10 |
|---|---|---|---|---|---|
| Package | 121-MAPBGA (8x8 mm) | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same | 121-MAPBGA (8x8 mm) - same |
| Brand | NXP Semiconductors (Freescale) | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Speed | Arm Cortex-M4, 100 MHz | Cortex-M4, 100 MHz | Cortex-M4, 100 MHz | Cortex-M4, 100 MHz | Cortex-M4, 100 MHz |
| Flash Memory | 512 KB | 512 KB | 256 KB | 512 KB | 512 KB |
| Ethernet / IEEE 1588 | Yes | Yes | Yes | No (K52 has no Ethernet) | No (K50 has no Ethernet) |
| Supply Voltage | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V | 1.8 V / 2.5 V / 3.3 V |
Wichtigste Unterscheidungsmerkmale
- IEEE 1588 Ethernet in-package (vs. MK52DN512CMD10)
- Full 512 KB flash density (vs. MK60DN256VMD10)
- New-design lifecycle status (vs. MK60DN512ZVMD10)
Designhinweise
The 121-MAPBGA (8x8 mm) uses a fine ball pitch requiring via-in-pad or dog-bone fan-out; plan an 11x11 ball escape on at least a 4-layer PCB with dedicated ground and 3.3 V power planes. Assign decoupling capacitors (100 nF per supply ball plus bulk 10 uF) directly beneath the package on the opposite layer to minimize loop inductance. Verify the footprint against the official NXP MAP-BGA package drawing rather than third-party libraries, as ball-map assignments differ across K60 family members.
The MK60DN512VMC10 accepts 1.8 V, 2.5 V or 3.3 V supplies. At 100 MHz with all peripherals active, core current is highest; power the part from a clean LDO or buck regulator with attention to the VDD/VDDA domains - separate analog supply filtering (ferrite plus decoupling) preserves ADC accuracy in mixed-signal designs. Sequence supplies so VDD is stable before releasing the reset line; use the on-chip POR/LVD as a safety net, not as the primary supervision, in industrial environments with slow-rising rails.
Note that the closely related MK60DN512ZVMD10 appears in distributor records as 'Not Recommended for New Designs' while the standard MK60DN512VMC10 remains Active - always confirm lifecycle status per NXP PCN notices before qualifying any K60 variant in a new design. Also, the crypto (Z) and non-crypto variants are software-visible as different devices; firmware using the hash/AES acceleration module will not run on the non-Z MK60DN512VMC10, so gate crypto code at compile time.
Compliance-Informationen
NXP publishes an environmental/material composition declaration (MCD) for MK60DN512VMC10 at nxp.com/mcds/MK60DN512VMC10.pdf listing reportable substances; obtain the current RoHS/REACH certificate directly from the NXP product page's Environmental section rather than relying on this summary.
