MKE02Z64VFM4 - 40MHz Cortex-M0+ MCU | NXP | Industrial Control
Teilenummer: MKE02Z64VFM4 ✓ AktivMKE02Z64VFM4 Übersicht
A microcontroller is a programmable system-on-chip used to acquire sensor data, execute control algorithms, and communicate with external hardware. The Kinetis KE02 belongs to the Kinetis E series, an entry-level 32-bit MCU portfolio combining an ARM Cortex-M0+ processor, embedded flash, SRAM, analog conversion, timers, communication peripherals, and GPIO in one package. This hierarchy places the device in the broader embedded-processing and industrial-automation categories.
Key features include a 32-bit ARM Cortex-M0+ core operating at 40 MHz, 64 KB of program flash, and 4 KB of SRAM. The MCU is offered in a 32-lead HVQFN package with an exposed thermal pad. Its operating supply options include 3.3 V and 5 V systems, while its integrated analog features support industrial designs that need measurement and control functions without excessive external components.
The KE02 architecture provides a practical balance of processing performance, memory, and integration for embedded control rather than high-performance computing. A 40 MHz Cortex-M0+ core offers sufficient control-loop and communications bandwidth for sensors, actuators, and compact control panels. The 64 KB flash area provides room for application firmware, while 4 KB of SRAM supports working variables, stacks, and peripheral buffers.
Typical uses include factory automation equipment, building controls, appliance controllers, automotive body-control modules, motor-control peripherals, communication gateways, and low-cost embedded instruments. The compact 5 mm by 5 mm footprint makes the MCU suitable for space-constrained assemblies while still providing a practical exposed-pad thermal path.
PCB design should preserve the exposed-pad land pattern, connect it to the appropriate ground plane, and place decoupling capacitors close to the supply pins. Firmware development should also account for pin multiplexing and the peripheral assignments shown in the manufacturer pin-description tables rather than treating all general-purpose I/O as equivalent.
This product page organizes the NXP MKE02Z64VFM4 specifications, sourcing information, same-package alternatives, application guidance, and design considerations into a compact engineering reference. It also highlights where a lower-memory family member can reduce memory requirements while retaining the same MCU architecture and physical footprint.
Drop-in-Alternativen für MKE02Z64VFM4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MKE02Z64VFM4 (gleiche Bauform und Footprint) – abweichend in Architecture, Exposed Pad, Flash Memory, Package.
MKE02Z32VFM4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MKE02Z16VFM4
✅ Drop-In ⚠️ Spezifikationen ungeprüftPreis auf Anfrage
Datenblatt ansehen →MKE02Z64VFM4 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Series | Kinetis KE02 |
| Processor Core | ARM Cortex-M0+ |
| Maximum CPU Frequency | 40 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 4 KB |
| Architecture | 32-bit RISC |
| Operating Supply Options | 3.3 V / 5 V |
| Gehäuse | 32-lead HVQFN, 5 mm x 5 mm |
| Exposed Pad | Yes |
| Montageart | Surface mount |
| Programming Interface | Single-wire debug and SWD programming |
| Analog Features | Built-in analog features |
| Communication and Timing Peripherals | Communication, timing, and control peripherals |
| Lebenszyklusstatus | Active |
MKE02Z64VFM4 32-lead hvqfn, 5 mm x 5 mm Pinbelegungsleitfaden
Pinbelegung für MKE02Z64VFM4 (32-lead hvqfn, 5 mm x 5 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MKE02Z64VFM4.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MKE02Z64VFM4 ist geeignet für 6 Anwendungs: Factory Automation Control, Appliance and Building Control, Automotive Body Control, Motor and Actuator Control, Communication Gateway, Portable Measurement Instrument.
Factory Automation Control
MKE02Z64VFM4 fits compact factory automation controllers because its 40 MHz ARM Cortex-M0+ core can execute sequencing logic while the integrated analog, timing, and control peripherals support sensor acquisition and actuator control. The 64 KB flash capacity leaves room for calibration tables, diagnostics, communications routines, and controlled firmware growth. Its 32-HVQFN 5 mm by 5 mm package also reduces board area in distributed I/O modules. Design the exposed pad as a thermal and ground path, place local decoupling close to the supply pins, and verify that the selected peripheral set covers the required encoder, communication, and analog functions.
Empfohlen
Appliance and Building Control
MKE02Z64VFM4 is suitable for appliance controllers, room controls, and compact building-control modules that combine digital I/O, timing functions, and analog measurement. The 40 MHz Cortex-M0+ processor provides practical responsiveness for motor sequences, user interfaces, and communication tasks, while 64 KB of flash accommodates protocol handlers and diagnostic logic. Its 3.3 V or 5 V operating options support both low-voltage control electronics and more conventional embedded rails. Confirm the device’s specified operating-temperature grade, use the exposed-pad ground geometry for dependable return paths, and avoid routing sensitive analog inputs next to switching nodes.
Empfohlen
Automotive Body Control
MKE02Z64VFM4 can support compact body and accessory control modules that require a 32-bit MCU, 64 KB of flash, and integrated analog resources. The ARM Cortex-M0+ core executes control logic at up to 40 MHz, while the Kinetis KE02 peripheral set supports timers, communications, and measurement commonly used in body electronics. The 32-HVQFN package allows compact controller placement, but automotive deployment requires verification of the exact temperature grade, qualification status, transient immunity, and functional-safety expectations. Use qualified external protection and communication components, and follow the manufacturer layout guidance for the exposed thermal pad.
Empfohlen
Motor and Actuator Control
MKE02Z64VFM4 provides sufficient timing and control performance for compact motor, solenoid, relay, and actuator controllers. Its 40 MHz ARM Cortex-M0+ core can execute position or step-control algorithms, while the family’s timing, control, and analog peripherals help reduce external circuitry. The 64 KB flash reserve supports motion tables, current-control routines, fault handling, and field diagnostics. Use PWM-capable pins and the timer pin assignments listed by NXP, separate analog returns from switching-current paths, and include appropriate transistor drivers or motor-interface components. Thermal performance and motor-current limits depend on the external power stage, so validate the complete assembly rather than the MCU alone.
Empfohlen
Communication Gateway
MKE02Z64VFM4 is appropriate for small protocol-conversion and communication gateways that need deterministic embedded processing without a high-power application processor. The 40 MHz Cortex-M0+ core can handle serial framing, protocol conversion, local buffering, and configuration, while 64 KB of flash provides room for multiple protocol stacks. The KE02 family includes communication, timing, and control resources intended for compact embedded designs. The exact UART, SPI, and I2C capabilities must be checked against the selected package and pin-assignment table. Preserve signal integrity with short ground returns, controlled impedance where needed, and isolation if the interface connects to long cables or high-voltage equipment.
Empfohlen
Portable Measurement Instrument
MKE02Z64VFM4 supports compact measurement instruments that combine sensor conditioning, digital processing, calibration, and a local communication interface. Its built-in analog features make it relevant to designs that measure external signals without relying on a large mixed-signal controller, while the 40 MHz Cortex-M0+ core supports filtering, calibration, and data formatting. With 4 KB of SRAM, firmware must budget carefully for sample buffers and stack depth, and the 64 KB flash area should be profiled for code, constants, and bootloader coexistence. Keep analog inputs away from digital switching paths, use a quiet reference arrangement, and follow the manufacturer’s recommended decoupling and exposed-pad layout.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MKE02Z64VFM4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MKE02Z32VFM4 | MKE02Z16VFM4 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) |
| Processor Core | ARM Cortex-M0+ | ARM Cortex-M0+ | ARM Cortex-M0+ |
| Maximum CPU Frequency | 40 MHz | 40 MHz | 40 MHz |
| Flash Memory | 64 KB | 32 KB | 16 KB |
| SRAM | 4 KB | 4 KB | 4 KB |
| Operating Supply Options | 3.3 V / 5 V | 3.3 V / 5 V | 3.3 V / 5 V |
| Product Series | Kinetis KE02 | Kinetis KE02 | Kinetis KE02 |
| Analog Features | Built-in analog features | Built-in analog features | Built-in analog features |
Wichtigste Unterscheidungsmerkmale
- Provides twice the flash of MKE02Z32VFM4 (vs. MKE02Z32VFM4)
- Provides four times the flash of MKE02Z16VFM4 (vs. MKE02Z16VFM4)
- Maintains the same 40 MHz Cortex-M0+ processing class (vs. MKE02Z32VFM4)
Designhinweise
Follow the manufacturer land pattern for the 32-HVQFN device, including its exposed thermal pad and perimeter pads. Place the MCU close to its supply-decoupling network, keep the ground connection to the exposed pad short, and route sensitive analog inputs away from switching and high-current return paths. Check pad dimensions and solder-mask policy against the current NXP package drawing rather than scaling from a generic 5 mm QFN footprint.
Use the recommended local bypass capacitors and the package’s specified supply and ground pins. The MCU supports 3.3 V and 5 V systems, but the selected operating mode, clock source, and peripheral load determine the actual supply current. Keep power-rail and return-current paths compact, provide adequate source capability for peak peripheral demand, and avoid sharing narrow return paths with switching-node currents.
Treat the exposed pad as both a thermal path and a low-inductance ground connection. A compact copper plane beneath the device improves heat transfer and current return performance, but it must conform to the manufacturer’s exposed-pad soldering and assembly requirements. Validate junction temperature using the package thermal data for the actual PCB copper area, enclosure, ambient temperature, and switching components around the MCU.
Do not assume that identical package dimensions guarantee identical behavior. Before replacing MKE02Z64VFM4 with a lower-flash family member, verify the linker-memory budget, boot configuration, clock settings, peripheral availability, pin multiplexing, and peripheral instances. MKE02Z32VFM4 and MKE02Z16VFM4 share the family hardware platform, but reduced flash can make an existing binary fail to link or remove room for diagnostic and future-update code.
Compliance-Informationen
NXP identifies MKE02Z64VFM4 as active and describes the KE02 family for industrial and automotive applications. The exact RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations for this orderable MPN require confirmation from the manufacturer product documentation.