MKL26Z32VFT4 - 48MHz Cortex-M0+ 32KB MCU | NXP
Teilenummer: MKL26Z32VFT4 ✓ AktivMKL26Z32VFT4 Übersicht
A microcontroller is a programmable semiconductor that combines a processor core, memory, peripherals, and I/O in one integrated circuit. The Arm Cortex-M0+ core provides a compact, energy-efficient architecture commonly used in cost-sensitive embedded control products. Within the product hierarchy, this device is a general-purpose microcontroller, part of the Kinetis KL2 family, and designed for applications that need real-time control, serial connectivity, data acquisition, and USB connectivity without a higher-cost application processor.
The principal specifications include a 48 MHz maximum clock, 32 KB (32K x 8) embedded Flash, 4 KB (4K x 8) SRAM, and a 32-bit Arm Cortex-M0+ processor core. USB 2.0 OTG support adds full-speed peripheral and host-device interface capability. An integrated low-voltage regulator supports the MCU's internal supply requirements, while the collection of serial interfaces enables communication with sensors, displays, wireless modules, and external transceivers.
The MKL26Z32VFT4 belongs to the Kinetis L family, whose devices are positioned for pin, software, and tool compatibility across compatible family members. This compatibility can simplify firmware maintenance, peripheral design, and qualification across multiple product variants. Its operating-temperature information identifies a -40°C to 105°C ambient range, making it suitable for industrial and extended-temperature embedded equipment when the application also satisfies the device's complete electrical and environmental requirements.
Typical applications include USB-connected data loggers, compact industrial controllers, sensor-hub boards, wearable and accessory interfaces, building-control nodes, and USB-to-serial products. The 32 KB Flash footprint is suitable for compact control firmware, while the Cortex-M0+ core handles peripheral servicing, protocol processing, and low-power state management. USB can reduce connector count when the product must exchange data with a host while retaining a small board area.
Designers should select decoupling, oscillator, reset, and USB routing according to the manufacturer reference design and datasheet. The exposed pad beneath the QFN requires a properly designed thermal and ground structure, while USB differential routing should use controlled geometry and a continuous reference plane. Confirm the exact pin assignment and exposed-pad connection in the manufacturer datasheet before laying out or modifying a PCB.
This product page combines device specifications, lifecycle information, sourcing guidance, compatibility analysis, and practical design considerations. It also identifies verified same-footprint alternatives and highlights the engineering differences that matter when evaluating a replacement for an existing Kinetis KL2 design.
Drop-in-Alternativen für MKL26Z32VFT4 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
MKL25Z32VFT4
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MKL26Z64VFT4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MKL26Z128VFT4
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MKL26Z32VFT4 Grenzwerte & elektrische Eigenschaften
| Product Type | 32-bit Arm Cortex-M0+ microcontroller |
| Product Family | Kinetis KL2 |
| Processor Core | Arm Cortex-M0+ |
| Core Architecture | 32-bit RISC |
| Maximale Taktfrequenz | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| SRAM | 4 KB (4K x 8) |
| Program Memory Type | Flash |
| USB Interface | USB 2.0 OTG, full speed |
| Minimum Supply Voltage | 1.71 V |
| Betriebstemperatur | -40°C to 105°C (TA) |
| Gehäuse | 48-QFN (7 x 7 mm) with exposed pad |
| Montageart | Surface mount |
| ADC Resolution | 16-bit |
| DAC Resolution | 12-bit |
| Integrated Low-Voltage Regulator | Yes |
| Lebenszyklusstatus | Active |
MKL26Z32VFT4 48-qfn (7 x 7 mm) with exposed pad Pinbelegungsleitfaden
Pinbelegung für MKL26Z32VFT4 (48-qfn (7 x 7 mm) with exposed pad-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MKL26Z32VFT4.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MKL26Z32VFT4 ist geeignet für 6 Anwendungs: USB Connected Data Logger, Industrial Sensor Hub, USB-to-Serial Control Adapter, Building Automation Node, Portable Measurement Instrument, Compact Power Monitoring Controller.
USB Connected Data Logger
The MKL26Z32VFT4 fits a compact USB data logger because its full-speed USB 2.0 OTG interface can connect the instrument directly to a host while the 48 MHz Cortex-M0+ core samples sensors and controls peripherals. Its 32 KB Flash stores firmware for acquisition, buffering, configuration, and USB communication, while 4 KB of SRAM supports active working state. The primary design trade-off is code capacity: logger features, data formats, and dual USB roles must be selected to remain within the 32 KB Flash budget. USB routing should follow the manufacturer reference layout, with controlled impedance and a continuous ground reference.
Empfohlen
Industrial Sensor Hub
The MKL26Z32VFT4 is suitable for an industrial sensor hub that aggregates readings from sensors, stores configuration information, and exposes data through serial or USB links. The 48 MHz Arm Cortex-M0+ core provides sufficient control bandwidth for interrupt-driven peripherals, while the integrated low-voltage regulator simplifies internal supply management. Its listed -40°C to 105°C ambient range supports extended-temperature equipment designs. Interface level translation, isolation, surge protection, and enclosure thermal performance must be handled separately, and the complete supply range must be confirmed before selecting external regulators.
Empfohlen
USB-to-Serial Control Adapter
The MKL26Z32VFT4 can implement a compact USB-to-serial adapter because USB 2.0 OTG provides the host-facing data path and the Kinetis serial interfaces provide the external connector path. The 32-bit Cortex-M0+ processor at 48 MHz can manage framing, buffering, flow control, and device configuration without a separate protocol controller. Firmware should support enumeration, suspend behavior, and the required baud rates, while the board must provide proper USB impedance control and connector protection. The 32 KB Flash and 4 KB SRAM favor focused embedded firmware rather than a full desktop-class protocol stack.
Empfohlen
Building Automation Node
The MKL26Z32VFT4 fits a connected building-automation node that monitors inputs, controls actuators, and reports status over USB or serial communications. The 48 MHz Cortex-M0+ core supports responsive task scheduling, the 32 KB Flash accommodates a compact protocol stack and application logic, and 4 KB of SRAM supports communication buffers and state. For low-power operation, use the MCU's documented sleep modes and wake sources, then confirm whether USB remains attached or must be disconnected during duty-cycled operation. External relays, sensor inputs, and long wiring require appropriate isolation, protection, and grounding outside the MCU.
Empfohlen
Portable Measurement Instrument
The MKL26Z32VFT4 can serve as the control processor in a portable measurement instrument that combines USB connectivity with analog or sensor front ends. Its 48 MHz core can service conversions, filtering, calibration, and a responsive user interface, while 32 KB of Flash holds instrument firmware and 4 KB of SRAM holds working buffers. The target's listed 16-bit ADC and 12-bit DAC resolution figures should be evaluated against the required measurement accuracy rather than treated as standalone system accuracy. Power-budget analysis, analog reference design, calibration storage, and USB suspend behavior are critical product-level considerations.
Empfohlen
Compact Power Monitoring Controller
The MKL26Z32VFT4 is applicable to a compact power-monitoring controller that measures current, tracks operating state, and exports records through USB. The fast 48 MHz Cortex-M0+ core can service the measurement peripherals and foreground sampling while the integrated low-voltage regulator supports the internal MCU supply. The listed 16-bit ADC resolution may assist front-end measurement design, although overall accuracy also depends on the analog network, reference source, calibration, and layout. Use the manufacturer's USB and exposed-pad layouts, provide continuous ground planes, and keep high-current paths separate from precision analog routing.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MKL26Z32VFT4 – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MKL25Z32VFT4 | MKL26Z64VFT4 | MKL26Z128VFT4 |
|---|---|---|---|---|
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Product Family | Kinetis KL26 | Kinetis KL25 | Kinetis KL26 | Kinetis KL26 |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 32 KB | 32 KB | 64 KB | 128 KB |
| USB 2.0 OTG | Yes | No | Yes | Yes |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
Wichtigste Unterscheidungsmerkmale
- Lower Flash requirement with full USB support (vs. MKL26Z64VFT4)
- Broader firmware headroom for expanding application code (vs. MKL26Z32VFT4)
- USB capability distinguishes the KL26 family from KL25 (vs. MKL25Z32VFT4)
Designhinweise
Use the NXP 48-QFN land pattern and exposed-pad construction shown in the manufacturer package drawing. The exposed pad should connect to the intended ground or supply plane through a via array, using the manufacturer's recommended via count and dimensions. Avoid placing high-current or fast-switching routes across the pad area, and preserve uninterrupted ground reference beneath the device to reduce return-path discontinuity.
Route the USB D+ and D+ pair as a short, length-matched, continuously referenced differential pair. Follow the manufacturer reference layout for impedance geometry and via placement, and keep stubs and test pads minimal. Provide the specified source-series termination arrangement and place USB protection close to the connector so surge and ESD current does not propagate through the MCU area.
Place the required supply and bypass capacitors at the pins specified by the manufacturer reference design, using the shortest possible ground-return paths. Confirm the complete operating and absolute-maximum voltage limits in the datasheet before selecting an external regulator. The integrated low-voltage regulator supports internal MCU operation but does not replace the application rail design for USB, sensors, relays, or other external loads.
Do not treat matching QFN dimensions as proof of replacement compatibility. The KL25 candidate lacks the KL26 family's USB 2.0 OTG feature, while the higher-Flash KL26 candidates must be checked for identical pin multiplexing, SRAM, supply limits, and firmware requirements. Make the substitution only after comparing the exact datasheet pin table and validating the existing firmware image on the intended device.
Compliance-Informationen
The manufacturer product page lists the device as active, but the available product information does not state the requested environmental compliance statuses.