MPC8377EVRANGA - 800MHz PowerQUICC II Pro SoC | NXP
Teilenummer: MPC8377EVRANGA ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $68.5 | $68,50 |
| 10 | $62.4 | $624,00 |
| 100 | $55.9 | $5.590,00 |
| 500 | $50.2 | $25.100,00 |
| 1.000 | $46.75 | $46.750,00 |
MPC8377EVRANGA Übersicht
An SoC (System-on-Chip) integrates a microprocessor core, memory controller, and multiple peripheral interfaces into a single silicon die, reducing board space, BOM count, and power consumption compared with multi-chip designs. The MPC8377E belongs to the PowerQUICC II Pro family from NXP, which sits at the entry of the Power Architecture (PowerPC) processor hierarchy and is widely used in routers, NAS appliances, industrial gateways, and print servers.
Key features of this device include an e300c4s core with 32KB L1 instruction and 32KB L1 data caches, DDR1/DDR2 memory controller supporting up to 1GB of addressable memory, hardware-accelerated SEC for IPsec/SSL/TLS, two GbE MACs with SGMII support, USB 2.0, SATA host, PCI and PCI-Express interfaces, and integrated 32-bit address bus. The 0C to 105C operating temperature range supports thermally constrained commercial and industrial enclosures.
The e300c4s is a superscalar PowerPC core with out-of-order execution, branch prediction, and dedicated multiplier/ALU units. Combined with the integrated SEC, the MPC8377EVRANGA can sustain encrypted throughput suitable for VPN gateways while leaving the CPU free for routing, QoS, and protocol processing.
Typical applications include small-business routers and firewalls, network-attached storage (NAS) controllers, DSL/cable gateway platforms, industrial control gateways, and secure print/image servers. The combination of PCI/PCIe plus GbE makes the part drop-in compatible with established PowerQUICC II Pro reference designs.
When designing with this part, allocate 4-layer PCB minimum for the TEPBGA, route DDR signals with matched impedance and length-matched traces, and provide a low-noise 1.0V/1.2V core supply capable of delivering the full load. Refer to the manufacturer hardware design checklist for parallel termination on the DDR bus.
This page synthesizes distributor pricing, NXP-sourced drop-in variants from the same MPC8377 family, and practical design notes not always visible on manufacturer sales pages.
Drop-in-Alternativen für MPC8377EVRANGA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC8377EVRANGA (gleiche Bauform und Footprint) – abweichend in Core Architecture, Security Engine, USB, Mounting Type, Ethernet.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8378VRANGA
✅ Drop-In✓ Auf Lager
$41 / Stück
Datenblatt ansehen →MPC8378ECVRAJFA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8377ECVRAJFA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8377EVRANGA Grenzwerte & elektrische Eigenschaften
| Manufacturer | NXP Semiconductors |
| Series | PowerQUICC II Pro |
| Core Processor | PowerPC e300c4s |
| Core Architecture | PowerPC; e300 |
| Core Speed | 800MHz |
| Number of Cores | 1 |
| Datenbusbreite | 32-bit |
| Address Bus Width | 32-bit |
| Package Type | 689-TEPBGA II |
| Package Dimensions | 31 mm x 31 mm |
| Montageart | Surface Mount (BGA) |
| Memory Controller | DDR1/DDR2 (per datasheet) |
| Ethernet | 1GbE (SGMII support, per datasheet) |
| PCI/PCIe Support | PCI and PCI Express (per datasheet) |
| USB | USB 2.0 (per datasheet) |
| SATA | SATA host (per datasheet) |
| Security Engine | Integrated SEC (IPsec/SSL/TLS) |
| Betriebstemperaturbereich | 0C to +105C |
| L1 Cache | 32KB I-cache / 32KB D-cache |
| RoHS-Status | SnPb (PBGA, leaded) per ordering code |
| Ordering Code (suffix) | VRANGA - Encrypted flow, 0-105C |
| No. of Terminals | 689 |
| Terminal Form | BALL |
MPC8377EVRANGA 31 mm x 31 mm Pinbelegungsleitfaden
Pinbelegung für MPC8377EVRANGA (31 mm x 31 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8377EVRANGA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8377EVRANGA ist geeignet für 6 Anwendungs: SMB VPN Router / Firewall, Network-Attached Storage (NAS) Controller, DSL / Cable Gateway Platform, Industrial Control Gateway, Print / Imaging Server, Secure Branch-Office Router.
SMB VPN Router / Firewall
The MPC8377EVRANGA fits SMB VPN router and firewall platforms because its integrated security engine (SEC) offloads IPsec/SSL/TLS encryption while the e300c4s core handles routing, NAT, and QoS processing. The dual GbE ports (one WAN, one LAN) enable typical small-business firewall topologies without an external PHY bridge, and the 1.4W typical power dissipation suits fanless appliance chassis. DDR1/DDR2 support up to 1GB lets the platform run an embedded Linux/RTOS with full Netfilter/iptables stacks and concurrent encrypted tunnels at line-rate. Pairs naturally with a GbE PHY (e.g. Vitesse/Marvell) and a PCI-Express WAN NIC for DSL/cable modems.
Empfohlen
Network-Attached Storage (NAS) Controller
In SMB NAS enclosures, the MPC8377EVRANGA acts as the central SoC because its SATA host port directly connects to one or more 3.5in HDDs, eliminating an external controller. The 800MHz e300c4s with integrated SEC delivers encrypted-RAID read/write throughput suitable for small-business file servers, while DDR1/DDR2 up to 1GB supports caching and SMB/NFS protocol stacks. Unlike a discrete CPU plus bridge chip design, this SoC cuts BOM by roughly 30% and reduces board area for compact 2-bay appliance form-factors.
Empfohlen
DSL / Cable Gateway Platform
Cable and DSL gateways leverage the MPC8377EVRANGA's USB 2.0 plus GbE plus PCI/PCIe to attach a VoIP DSP, a Wi-Fi card, and the WAN DSL/Cable modem front-end via PCIe. The integrated SEC enables secure VoIP SRTP, WPA2 enterprise authentication, and IPsec VPN for branch-office gateways. The wide 0C-to-105C operating range supports the elevated thermals inside fanless plastic enclosures used in consumer broadband CPE boxes; total platform BoM sits below discrete-MPU alternative designs.
Empfohlen
Industrial Control Gateway
For industrial gateway applications (Modbus/Profibus/Ethernet IP concentration), the MPC8377EVRANGA's PCI expansion and dual GbE provide the connectivity needed, while the integrated SEC handles authenticated/encrypted tunneling back to cloud SCADA servers. The 0C-to-105C operating range tolerates typical factory-floor chassis temperatures; DDR1/DDR2 controller interfaces with industrial-grade memory modules. The PowerQUICC II Pro's mature Linux/RTOS support accelerates industrial-software development.
Empfohlen
Print / Imaging Server
The MPC8377EVRANGA suits high-performance print-server and imaging-server applications where the USB 2.0 and GbE interfaces connect to printer engines or scanner subsystems. The 800MHz core handles raster image processing and PCL/PostScript rendering in real time, while integrated DDR1/DDR2 up to 1GB buffers page images for high-DPI A3 print paths. PCI expansion enables additional parallel port/IEEE-1284 or dedicated imaging ASIC glue logic for legacy print engines.
Empfohlen
Secure Branch-Office Router
Branch-office routers with built-in threat management rely on the MPC8377EVRANGA because its hardware-accelerated SEC sustains IPsec throughput without CPU stalls, while PCI-Express expansion accepts a 4G/LTE WAN module. The e300c4s core runs Quagga/FRR plus stateful firewall rules at line rate; DDR1/DDR2 supports flow-state tables and IPS signature databases. Compact footprint and integration enable the small-form-factor chassis used in retail/branch deployments where energy and space budgets are tight.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8377EVRANGA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8378VRANGA | MPC8378ECVRAJFA | MPC8377ECVRAJFA |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Core | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s | PowerPC e300c4s |
| Memory Controller | DDR1/DDR2 | DDR1/DDR2 | DDR1/DDR2 | DDR1/DDR2 |
| Integrated Security Engine | Yes (SEC) | Yes (SEC) - enhanced | Yes (SEC) | Yes (SEC) |
Wichtigste Unterscheidungsmerkmale
- Integrated security engine (SEC) (vs. MPC8378VRANGA)
- EOL-disclosed by NXP (vs. MPC8378VRANGA)
- 800MHz VR speed grade (vs. MPC8377ECVRAJFA)
Designhinweise
The 689-ball TEPBGA II (31x31mm) requires at least a 4-layer PCB with continuous ground planes beneath the BGA and matched-impedance traces for DDR. Use 1oz copper for outer layers and 0.5oz for inner; via-in-pad micro-vias are recommended below the BGA to escape the inner-balls cleanly per NXP hardware design guidance.
DDR1/DDR2 routing must meet the e300 core timing with trace length matching of +-50 mils for clocks and +-100 mils for the address/command bus. Use series termination if required by the memory-topology schematic; SSTL18 termination is the standard recommended configuration for DDR2 operation.
Provide separate analog and digital supplies with ferrite-bead isolation; the MPC8377EVRANGA draws hundreds of mA on the 1.0V/1.2V core rail plus 2.5V DDR termination. Bulk-decouple with at least four 10uF ceramics plus a 470uF tantalum or polymer cap near the SoC; refer to the manufacturer hardware design checklist for exact capacitor counts by net.
When laying out the TEPBGA, do not route signals through the inner-ball row escape channels without via-in-pad. Multiple-power-rail sequencing is required at boot; failure to meet the manufacturer's rail-sequencing timing (often controlled by an external TPSxxxxxxx PMIC) can cause memory-train failures on first boot in production.
Compliance-Informationen
Per NXP ordering code the part suffix 'NG' / 'NC' indicates SnPb (PBGA, leaded) - non-RoHS. Lead content exempt under PBGA solder termination per ordering code. Reach and halogen status not stated in the web data; conflict-mineral compliance per NXP CSR statement not visible in the verified data.
