MPC8536EBVTAULA - PowerQUICC III 1.333GHz SoC | NXP
Teilenummer: MPC8536EBVTAULA ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $285 | $285,00 |
| 10 | $261 | $2.610,00 |
| 100 | $238.5 | $23.850,00 |
| 500 | $219 | $109.500,00 |
| 1.000 | $199.5 | $199.500,00 |
MPC8536EBVTAULA Übersicht
A PowerQUICC III processor is a type of communications processor that combines a high-performance Power Architecture CPU core with integrated networking peripherals, security accelerators, and memory controllers on a single die. It belongs to the broader hierarchy of microprocessor -> embedded processor -> communications SoC -> PowerQUICC family, designed to replace multiple discrete components in networking appliances with a single integrated device.
Key features include a 32-bit e500 core with dual-issue superscalar execution, integrated DDR2/DDR3 memory controller with ECC, four Gigabit Ethernet MACs (SGMII/RGMII), two PCI Express interfaces, two SATA-II ports, two USB 2.0 controllers (host/device), enhanced local bus, DUART, I2C, SPI, SD/MMC/SDHC host controller, and the NXP Security Engine for IPsec, SSL/TLS, and bulk crypto. The 783-pin FCBGA package uses a 1 mm pitch and supports high-speed parallel interfaces required by line-rate packet processing.
Typical applications include enterprise and SMB routers, secure VPN gateways, network attached storage (NAS) controllers, industrial Ethernet switches, IP-PBX systems, and wireless LAN controllers. The integrated SEC engine offloads AES, DES/3-DES, SHA-1/2, and public-key accelerators from the host core, enabling sustained gigabit IPsec throughput.
When designing with this device, allocate a 4-layer PCB with continuous ground planes under the BGA and matched-length routing for DDR2/DDR3, PCIe, SATA, and SGMII differential pairs. Thermal management must account for the 783-pin FCBGA junction-to-ambient thermal resistance, and a heat spreader is recommended at full 1.333 GHz operation.
This page synthesizes distributor pricing, 783-pin FCBGA drop-in alternatives within the PowerQUICC III and QorIQ families, and practical design notes that complement the manufacturer datasheet for routing, security, and power-rail sequencing decisions.
Drop-in-Alternativen für MPC8536EBVTAULA – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC8536EBVTAULA (gleiche Bauform und Footprint) – abweichend in Lead-Free / RoHS, Maximum Core Frequency, Operating Temperature, Package.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8536EBVJAULA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8536E-BVJAULA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8536E-BVTAULA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8536E-BVLAULA
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
P1020NSE2HFB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8536EBVTAULA Grenzwerte & elektrische Eigenschaften
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Datenbusbreite | 32-Bit |
| Maximum Core Frequency | 1.333 GHz (family scaling to 1.5 GHz) |
| Process Technology | 90 nm (0.09 um) CMOS |
| Supply Voltages | 1.5 V / 1.8 V / 2.5 V / 3.3 V |
| Gehäuse | 783-FCBGA (29 x 29 mm, 1 mm pitch, 2.80 mm height) |
| Pin-Anzahl | 783 |
| Memory Controller | DDR2 / DDR3 with ECC |
| Ethernet | 4 x Gigabit Ethernet (SGMII / RGMII) |
| PCI Express Lanes | 2 x PCIe interfaces |
| SATA Ports | 2 x SATA-II |
| USB | 2 x USB 2.0 (host / device) |
| Security Engine | SEC (IPsec, SSL/TLS, AES, DES/3DES, SHA-1/2, public key) |
| Storage I/O | SD/MMC/SDHC host controller |
| Betriebstemperatur | 0 C to +125 C |
| Montageart | Surface Mount (BGA) |
| Lead-Free / RoHS | Lead-Free (per datasheet package code) |
MPC8536EBVTAULA 783-fcbga (29 x 29 mm, 1 mm pitch, 2.80 mm height) Pinbelegungsleitfaden
Pinbelegung für MPC8536EBVTAULA (783-fcbga (29 x 29 mm, 1 mm pitch, 2.80 mm height)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8536EBVTAULA.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8536EBVTAULA ist geeignet für 6 Anwendungs: Enterprise and SMB Routers, IPsec / SSL VPN Gateway, Network Attached Storage (NAS) Controllers, Industrial Ethernet Switches, Wireless LAN and 5G Small-Cell Controllers, Secure Printers and Imaging Gateways.
Enterprise and SMB Routers
The MPC8536EBVTAULA fits enterprise and SMB router designs because the integrated DDR2/DDR3 controller with ECC plus four Gigabit Ethernet MACs (SGMII/RGMII) eliminate the need for an external switching ASIC in mid-range chassis. The e500 core at 1.333 GHz runs routing daemons such as Linux netfilter or VxWorks networking stacks with headroom for control-plane QoS and shaping. Engineers placing this device recommends pairing the processor with a PHY quad such as the NXP BCM5464S or Marvell 88E1240, isolating the SEC engine on a separate PCIe bus to maintain deterministic VPN throughput.
Empfohlen
IPsec / SSL VPN Gateway
The integrated NXP Security Engine (SEC) makes the MPC8536EBVTAULA a strong fit for IPsec and SSL VPN gateway appliances. The SEC offloads AES, DES/3DES, SHA-1/2, and public-key operations, leaving the e500 core free to run routing, NAT, and tunnel-management code. At 1.333 GHz the device sustains gigabit IPsec when paired with DDR3-1066. Place the part between the WAN PHY and the LAN switch fabric, isolating DMA traffic on dedicated PCIe lanes to maintain wire-rate crypto performance under mixed workload conditions.
Empfohlen
Network Attached Storage (NAS) Controllers
The MPC8536EBVTAULA suits NAS controllers because the dual SATA-II ports, Gigabit Ethernet MACs, and DDR2/DDR3 controller with ECC provide a complete storage-processing node. The e500 core runs embedded Linux with file-system stacks such as ext4 or ZFS-on-Linux, while the SEC engine accelerates SMB/Kerberos authentication and encrypted-volume offload. Tie the device to a SATA multiplier or hardware RAID controller over PCIe, and validate the 783-FCBGA thermal envelope with the heat spreader attached for 24/7 always-on operation.
Empfohlen
Industrial Ethernet Switches
The MPC8536EBVTAULA fits managed industrial Ethernet switches because the four Gigabit Ethernet MACs, dual PCIe lanes, and integrated SEC support secure management-plane tunneling for SCADA networks. The e500 core runs the switch control stack, SNMP, and 1588D-baseline timing at full line rate. Design the PCB with industrial-grade Ethernet magnetics and conformal coating to match the device's 0 to 105 C operating range. Use the MPC8536EBVJAULA variant if the switch must operate across -40 to 125 C industrial environments.
Empfohlen
Wireless LAN and 5G Small-Cell Controllers
The MPC8536EBVTAULA serves as a controller in WLAN aggregation points and small-cell base stations because the integrated SEC accelerates encryption, the dual PCIe links tie into baseband modem ASICs, and the dual SATA ports support local caching. The e500 core at 1.333 GHz executes O-RAN-style L1/L2 scheduling layers with deterministic timing. Engineers placing this device in O-RAN architectures recommend isolating timing-sensitive PCIe traffic on its own clock buffer and adding a heatsink on the FCBGA for sustained throughput.
Empfohlen
Secure Printers and Imaging Gateways
The MPC8536EBVTAULA fits secure multi-function printer controllers because the SEC engine accelerates IPsec/SSL for enterprise print pipelines, the USB 2.0 host port interfaces with scanners/print engines, and the DDR2/DDR3 controller with ECC handles high-resolution image buffers. The e500 core at 1.333 GHz runs the printer firmware, job queue, and rendering pipeline. Tie the device to the print-engine ASIC over PCIe and isolate the SEC engine on its own SRAM bank to maintain imaging latency under encryption load.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8536EBVTAULA – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8536EBVJAULA | MPC8536E-BVJAULA | MPC8536E-BVTAULA | MPC8536E-BVLAULA | P1020NSE2HFB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) | FCBGA-780 (different land pattern) |
| Core Frequency | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.333 GHz | 1.0 GHz (-25%) | up to 1.0 GHz e500v2 |
| Operating Temperature | 0 C to +105 C | -40 C to +125 C (industrial) | -40 C to +125 C (industrial) | 0 C to +105 C (commercial) | 0 C to +105 C (commercial) | -40 C to +125 C (industrial) |
| Security Engine (SEC) | Yes | Yes | Yes | Yes | Yes | Yes |
| DDR Memory Support | DDR2 / DDR3 with ECC | DDR2 / DDR3 with ECC | DDR2 / DDR3 with ECC | DDR2 / DDR3 with ECC | DDR2 / DDR3 with ECC | DDR3 with ECC |
| Gigabit Ethernet Ports | 4 | 4 | 4 | 4 | 4 | 3 (eTSEC) |
| PCI Express Lanes | 2 x PCIe | 2 x PCIe | 2 x PCIe | 2 x PCIe | 2 x PCIe | 2 x PCIe + 1 x SRIO |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Active (migration target) |
Wichtigste Unterscheidungsmerkmale
- Integrated Security Engine (SEC) for line-rate IPsec / TLS offload (vs. MPC8536E-BVLAULA (1.0 GHz speed bin))
- Commercial temperature grade for indoor enterprise equipment (vs. MPC8536EBVJAULA (industrial -40 to +125 C))
- Drop-in compatibility across the MPC8536E family (vs. P1020NSE2HFB (QorIQ migration target))
Designhinweise
The 783-FCBGA package at 1 mm pitch requires a 4-layer PCB minimum with continuous ground and power planes directly under the BGA. Use microvia-in-pad construction (laser-drilled 0.1 mm vias) on the inner signal rows and follow NXP's BGA escape pattern from the application note. Matched-length routing (within 50 mil tolerance) is mandatory for DDR2/DDR3, PCIe, and SGMII differential pairs to meet the 1.333 GHz signal-integrity budget. Estimated: routing escape typically consumes the top two PCB layers under the BGA footprint.
At 1.333 GHz the die TDP is approximately 8 to 10 W depending on workload. The 783-FCBGA junction-to-ambient thermal resistance requires a heat spreader or heatsink plus adequate airflow to stay within the 0 to 105 C operating range. Estimated: theta_JA on a 4-layer JEDEC test card with 1 m/s airflow is in the 8 to 12 C/W range, giving a junction-to-ambient delta of 80 to 120 C at full load. Derate by 30% if the chassis is sealed.
Power the MPC8536EBVTAULA from a sequenced 1.5 V / 1.8 V / 2.5 V / 3.3 V rail set with strict monotonic ramp order (core first, then DDR I/O, then peripherals). Use a multi-rail PMIC such as the NXP MC34712 or equivalent. Add 220 uF bulk + 10 uF ceramic + 100 nF HF decoupling per rail near the BGA. Estimated: peak transient current on the 1.2 V core rail at wakeup is around 4 A, requiring at least 6 A PMIC headroom.
Route SGMII and SATA differential pairs over a continuous reference plane with 100 ohm differential impedance and keep skew below 5 mil. PCIe pairs require AC-coupling capacitors near the transmitter as per the PCI Express specification. DDR2/DDR3 address/command traces must be length-matched to the clock within 50 mil, and the DDR Vref supply must be routed as a wide island away from noisy rails. Failing these rules will yield bit-error rates above the link budget.
Common pitfalls include omitting the JTAG pull-up on TRST, leaving the PORESET open during board bring-up, and configuring DDR without proper write leveling. Use the NXP CodeWarrior or U-Boot bootloader defaults and validate DDR margins on the first prototypes. BGA rework requires a BGA-grade rework station; hand-rework is not feasible at 1 mm pitch.
Compliance-Informationen
Lead-Free per the NXP package code; RoHS compliance declared on NXP product page. REACH, halogen-free, and conflict-minerals status not explicitly listed in retrieved distributor data - confirm via manufacturer declaration before use in EU-regulated end products.
