MPC8543VUANG - PowerQUICC III e500 MPU 800MHz 783-FCBGA | NXP
Teilenummer: MPC8543VUANG ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $95 | $95,00 |
| 10 | $88 | $880,00 |
| 100 | $80 | $8.000,00 |
| 500 | $74 | $37.000,00 |
| 1.000 | $69 | $69.000,00 |
MPC8543VUANG Übersicht
An embedded microprocessor (MPU) is the central processing unit of an embedded computing system, integrating CPU core, cache, memory controller, and peripherals into a single IC. Within the broader taxonomy, the MPC8543 sits at: microprocessor -> embedded MPU -> PowerPC architecture -> communications processor. The PowerQUICC III line specifically adds a QUICC Engine block for protocol acceleration, positioning the part between general-purpose MPUs and specialized network processors.
Key features of the MPC8543VUANG include 32 KB instruction and 32 KB data L1 caches, 256 KB unified L2 cache, DDR2 memory controller, dual 10/100/1000 Mbps Ethernet, dual PCI Express controllers, four SerDes lanes, and an integrated security engine. The 800 MHz core delivers 1.6 Dhrystone MIPS per MHz and is supported by a dedicated hardware queue manager for packet processing without CPU intervention.
Architecturally, the device combines the e500 core with the QUICC Engine subsystem that offloads common communications tasks such as HDLC, ATM, and Ethernet bridging. The system bus operates at 400 MHz with 32-bit addressing, while on-chip coherency and SMP-ready interrupt logic simplify multi-MPC8543 designs.
Typical applications include industrial routers, secure access gateways, line cards in modular switches, factory automation controllers, and embedded industrial PCs. The combination of deterministic interrupt latency and rich connectivity makes the part attractive for both greenfield designs and legacy PowerQUICC II upgrades.
When designing with this device, allocate a multi-layer PCB with controlled-impedance DDR2 routing and a substantial copper pour under the FCBGA to dissipate the 5 to 8 W typical dissipation. JTAG boundary-scan is mandatory for first-stage bring-up and production test.
This page synthesizes distributor pricing, drop-in MPC85xx alternatives, and practical layout notes not assembled in the manufacturer datasheet, providing a faster path to design-in than searching individual distributor pages.
Drop-in-Alternativen für MPC8543VUANG – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC8543VUANG (gleiche Bauform und Footprint) – abweichend in Core Architecture, L2 Cache, Memory Controller, PCI Express, Mounting Type.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8543VUAQG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8543ECVUAQG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8543CVUAQG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8536CVJAULA
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
MPC8545VTAQGB
✅ Drop-In✓ Auf Lager
$115.4 / Stück
Datenblatt ansehen →MPC8543VUANG Grenzwerte & elektrische Eigenschaften
| Processor Series | PowerQUICC III (MPC85xx) |
| Core Architecture | PowerPC e500, 32-bit |
| Core Frequency | 800 MHz |
| Number of Cores | 1 |
| L1 Cache (Instruction) | 32 KB |
| L1 Cache (Data) | 32 KB |
| L2 Cache | 256 KB unified |
| Core Supply Voltage | 1.1 V |
| I/O Voltage | 3.3 V |
| Gehäuse | 783-FCBGA (29x29 mm) |
| Montageart | Surface Mount |
| Betriebstemperatur | 0C to +105C (industrial) |
| RoHS-Status | Compliant (lead-free PB-free per Mouser listing) |
| Ethernet Controllers | 2x 10/100/1000 Mbps |
| PCI Express | 2 controllers |
| DDR Memory Controller | DDR2 with ECC |
| Security Engine | Integrated (AES, DES, 3DES, MD, SHA) |
MPC8543VUANG 783-fcbga (29x29 mm) Pinbelegungsleitfaden
Pinbelegung für MPC8543VUANG (783-fcbga (29x29 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8543VUANG.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8543VUANG ist geeignet für 6 Anwendungs: Industrial Router / Secure Gateway, Telecom Line Card / Edge Aggregation, Factory Automation Controller, Embedded Industrial PC / Single-Board Computer, Secure Access Controller / VPN Concentrator, Network-Attached Storage Controller.
Industrial Router / Secure Gateway
The MPC8543VUANG's dual Gigabit Ethernet controllers, integrated security engine (AES/DES/SHA), and QUICC Engine hardware offload make it ideal for industrial routers and secure gateways. At 800 MHz the e500 core sustains wire-rate IPv4 forwarding while the security block accelerates VPN tunnels without taxing CPU cycles. The DDR2 controller with ECC handles packet buffers reliably across temperature extremes, and the 783-FCBGA footprint supports multi-layer PCBs required for high-speed routing.
Empfohlen
Telecom Line Card / Edge Aggregation
In telecom line cards and edge aggregation nodes, the MPC8543VUANG's two PCI Express controllers and four SerDes lanes enable direct attachment to line-side PHY devices and fabric switch ASICs. The QUICC Engine's HDLC/ATM offload matches legacy TDM and packet hybrid access networks, while the 800 MHz e500 core handles route-table maintenance and OAM processing. The 783-FCBGA provides the thermal headroom required for fanless chassis designs.
Empfohlen
Factory Automation Controller
Factory automation PLCs and motion controllers benefit from the MPC8543VUANG's deterministic interrupt response, hardware queue manager, and dual GbE for EtherCAT or PROFINET integration. The 800 MHz core executes deterministic scan loops, while ECC-protected DDR2 keeps process variables safe in electrically noisy factory environments. Industrial temperature grade (0C to +105C) supports cabinet-mounted operation without active cooling.
Empfohlen
Embedded Industrial PC / Single-Board Computer
Single-board computers for medical imaging, kiosk, and digital signage use the MPC8543VUANG as the main processor because it combines a complete PowerQUICC III system with PCIe, GbE, DDR2 memory, and security in one package. Designers benefit from NXP's mature Linux BSP and U-Boot support, which shortens time-to-market. The 783-FCBGA enables compact SBC form factors with all high-speed signals routed within the BGA break-out region.
Empfohlen
Secure Access Controller / VPN Concentrator
VPN concentrators and secure access controllers rely on the MPC8543VUANG's integrated security engine to perform AES, DES, and SHA acceleration at line rate. The 800 MHz e500 core handles policy enforcement and key exchange, while the dual GbE ports handle clear-text and tunneled traffic. ECC-protected DDR2 prevents silent memory corruption that could compromise cryptographic keys in long-running sessions.
Empfohlen
Network-Attached Storage Controller
Mid-range NAS controllers leverage the MPC8543VUANG's two PCI Express lanes to attach RAID HBAs, dual GbE for link aggregation, and the QUICC Engine for checksum offload. The DDR2 controller with ECC protects file-system metadata integrity, while 800 MHz CPU performance is sufficient for SMB/NFS protocol processing on small and mid-sized NAS enclosures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8543VUANG – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8543VUAQG | MPC8543ECVUAQG | MPC8543CVUAQG | MPC8536CVJAULA | MPC8545VTAQGB |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA - same family | 783-FCBGA (29x29) - same |
| RoHS / PB-Free | Yes (compliant) | Yes | Yes | Yes | Yes | Yes |
| Pin-to-Pin Compatible | Yes (reference) | Yes | Yes | Yes | Verify - shared family | Yes (mostly) |
Wichtigste Unterscheidungsmerkmale
- 800 MHz e500 core with hardware-accelerated security engine (vs. MPC8536CVJAULA)
- 256 KB L2 cache and dual Gigabit Ethernet (vs. MPC8536CVJAULA)
- Lower cost than higher-frequency MPC8545/MPC8548 family (vs. MPC8545VTAQGB)
Designhinweise
The 783-FCBGA package dissipates approximately 5 to 8 W at 800 MHz with all peripherals active. Provide a continuous copper pour directly under the BGA on inner layers connected via thermal via array (0.3 mm pitch, filled if possible). For chassis-mounted designs, attach an aluminum heat-sink with thermal interface material; without a heat-sink, junction temperature can exceed 105 C in enclosed spaces.
Use a 6+ layer PCB stack-up with stripline or microstrip routing for DDR2 signals. Match trace impedance to 50 ohms single-ended / 100 ohms differential. Place decoupling capacitors (100 nF + 10 uF) within 2 mm of each power pin. Route SerDes lanes with matched-length differential pairs and reference planes unbroken under the entire length.
DDR2 data, address, and clock signals must be length-matched within 25 mils for byte lanes and 50 mils across byte lanes. Place the MPC8543VUANG so that high-speed traces do not cross plane splits. JTAG TAP signals (TCK, TMS, TDI, TDO, TRST) require careful impedance control and series-termination to avoid signal-integrity issues during boundary-scan.
Do not reuse the MPC8543VUANG's hardware configuration registers blindly across MPC8543 mask revisions; peripheral base addresses can shift between rev 1.0 and rev 2.1 silicon. Always re-validate U-Boot and Linux device trees when changing mask revisions. Power sequencing must follow NXP's hardware specifications document - VDD must precede VTT within 50 ms to avoid latch-up.
Compliance-Informationen
RoHS and lead-free status confirmed by Mouser PB-free listing. AEC-Q100 not applicable to MPU. Conflict-mineral compliance per NXP statement.