MPC8547EVTAUJC - PowerPC e500 MPU 1.333GHz 783-FCBGA | NXP
Teilenummer: MPC8547EVTAUJC ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $176.55 | $176,55 |
| 10 | $168.2 | $1.682,00 |
| 100 | $152.8 | $15.280,00 |
| 250 | $144.1 | $36.025,00 |
| 500 | $138.4 | $69.200,00 |
MPC8547EVTAUJC Übersicht
An MPU (microprocessor unit) is a VLSI integrated circuit that contains one or more processor cores plus on-chip peripherals, memory controllers, and I/O subsystems, forming a complete compute platform on a single die. The MPC85xx family sits in the broader taxonomy: MPU -> embedded processor -> SoC -> semiconductor IC, and the MPC8547 specifically targets power-efficient networking, industrial control, and storage applications where deterministic processing, integrated communications engines, and hardware cryptography are required.
Key features of the MPC8547EVTAUJC include hardware-accelerated IPSec, SSL/TLS, and 3DES/AES/SHA security via the SEC engine, four tri-speed-Grade Ethernet MACs (10/100/1000 Mbps) with quality-of-service queues, dual I²C controllers, four UARTs, and a local bus controller. The device supports a 64-bit DDR/DDR2 memory interface with ECC, and the integrated PCI Express and Serial RapidIO ports enable high-throughput backplane designs in telecom and aerospace equipment.
The architecture uses a Book E-enhanced PowerPC core with separate 32 KB instruction and 32 KB data Level-1 caches, plus a unified 256 KB Level-2 cache. The device also implements Trust Architecture 2.0 with secure boot and run-time integrity checking, making it suitable for tamper-sensitive deployments.
Typical applications include multi-service routers, line cards for carrier-grade switches, secure VPN appliances, RAID/HBA storage controllers, and industrial automation controllers. The 1.333 GHz core combined with the SPE engine enables deterministic throughput on packet-processing workloads.
When designing with this part, allocate at minimum four PCB layers with a continuous ground plane beneath the FCBGA. The 783-ball FCBGA requires microvia or via-in-pad technology for reliable soldering; ENIG surface finish is recommended for high-reliability builds.
This page consolidates distributor pricing, drop-in same-package alternatives from the same MPC85xx family, and practical design notes that go beyond the manufacturer datasheet to support procurement and board bring-up decisions.
Drop-in-Alternativen für MPC8547EVTAUJC – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit MPC8547EVTAUJC (gleiche Bauform und Footprint) – abweichend in L2 Cache, RoHS Status, Memory Controller, PCI Express, Security Engine.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
MPC8547EVTAUJB
✅ Drop-In✓ Auf Lager
$124.5 / Stück
Datenblatt ansehen →MPC8548EVTAUJC
✅ Drop-In✓ Auf Lager
$185 / Stück
Datenblatt ansehen →MPC8547VTAUJB
✅ Drop-In✓ Auf Lager
$135 / Stück
Datenblatt ansehen →MPC8547EVTAQJC
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8547EVTANG
✅ Drop-In ⚠️ Spezifikationen ungeprüft📋 Referenzalternative (nicht im Katalog)
MPC8547EVTAUJC Grenzwerte & elektrische Eigenschaften
| Manufacturer | NXP Semiconductors (formerly Freescale) |
| Series | MPC85xx |
| Core Processor | PowerPC e500 |
| Number of Cores | 1 |
| Core Width | 32-Bit |
| Core Speed | 1.333 GHz |
| Co-Processors / DSP | Signal Processing; SPE, Security; SEC |
| RAM Controllers | DDR, DDR2, SDRAM |
| Graphics Acceleration | No |
| Ethernet | 4 x 10/100/1000 Mbps MACs |
| USB | USB 2.0 (Host + Device modes via UTMI) |
| PCI Express | Yes (x4 / x8 SerDes) |
| Serial RapidIO | Yes |
| Gehäuse | 783-BGA, FCBGA 29 mm x 29 mm |
| Montageart | Surface Mount (BGA) |
| Betriebstemperatur | -40C to +105C (industrial) |
| Supply Voltage (Core) | 1.0 V (typ) |
| Supply Voltage (I/O) | 1.8 V / 2.5 V / 3.3 V (multi-rail) |
| Security Engine | SEC 2.0 (IPSec/SSL/AES/SHA/3DES) |
| L1 Cache | 32 KB I-cache + 32 KB D-cache |
| L2 Cache | 256 KB unified |
| RoHS-Status | Compliant (lead-free FCBGA) |
MPC8547EVTAUJC 783-bga, fcbga 29 mm x 29 mm Pinbelegungsleitfaden
Pinbelegung für MPC8547EVTAUJC (783-bga, fcbga 29 mm x 29 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MPC8547EVTAUJC.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MPC8547EVTAUJC ist geeignet für 6 Anwendungs: Multi-Service Routers and Gateways, Telecom Line Cards and Base Station Controllers, Secure VPN and SSL Appliances, RAID Storage Controllers and HBAs, Industrial Automation Controllers, Aerospace and Defense Avionics.
Multi-Service Routers and Gateways
The MPC8547EVTAUJC's 1.333 GHz PowerPC e500 core combined with four integrated Gigabit Ethernet MACs and TCP/IP acceleration hardware makes it a strong fit for multi-service routers and integrated threat management gateways. The hardware SEC 2.0 engine offloads IPSec/SSL/TLS at line rate so a single MPC8547 can sustain 1-2 Gbps of encrypted throughput, replacing what previously required discrete crypto ASICs. Designers typically place the MPC8547EVTAUJC at the heart of the routing engine with the SERDES connected to optical SFP/SFP+ cages, while its PCI Express x4 lane attaches to a multi-port Gigabit Ethernet switch fabric. The deterministic Book E interrupt latency also makes it well-suited to carrier-grade router designs where packet jitter must remain bounded.
Empfohlen
Telecom Line Cards and Base Station Controllers
The MPC8547EVTAUJC's PCI Express plus Serial RapidIO interfaces position it as a line-card processor in central-office switches, DSLAMs, and small-cell base station controllers. The 1.333 GHz e500 core can run the Radio Access Network protocol stack while the RapidIO link backhauls traffic to a baseband card at multi-gigabit rates. The integrated DDR2 controller with ECC supports the heavy memory footprint of cellular protocol state machines. Industrial temperature screening to +105C plus hardware ECC for soft-error detection are key requirements in central office racks, both of which the MPC8547EVTAUJC family provides. The MPC8547's deterministic interrupt latency and SEC engine also enable secure management-plane isolation required by telecom equipment.
Empfohlen
Secure VPN and SSL Appliances
The MPC8547EVTAUJC's SEC 2.0 engine accelerates AES, 3DES, SHA, RSA, and ECC operations at line rate, eliminating the need for a discrete cryptographic coprocessor in branch-office VPN concentrators and SSL inspection appliances. By keeping encryption on-chip, the design avoids the latency, cost, and complexity of external crypto ASICs while sustaining gigabit-class IPSec throughput. The four integrated Gigabit Ethernet MACs allow direct attachment of WAN, LAN, DMZ, and management ports without an external switch. Hardware secure boot via the integrated ROM verifies firmware integrity at power-up, while tamper-evident Trust Architecture 2.0 features support FIPS 140-2 deployments.
Empfohlen
RAID Storage Controllers and HBAs
The MPC8547EVTAUJC delivers the deterministic real-time performance required for RAID controller cards and Host Bus Adapters in enterprise storage arrays. The e500 core plus SPE auxiliary processing unit accelerates RAID parity calculations and XOR operations, offloading this work from the host CPU. The PCI Express x4/x8 interface provides up to 4 GB/s host-side bandwidth, while the integrated DDR2 controller with ECC supports the large write-back caches typical of high-end RAID controllers. The integrated SATA, SAS, or Fibre Channel connectivity (via external SerDes multiplexers) plus hardware ECC memory makes the MPC8547EVTAUJC well suited to enterprise-class storage. Its hardware AES engine also enables self-encrypting drive (SED) management.
Empfohlen
Industrial Automation Controllers
The MPC8547EVTAUJC's extended -40C to +105C operating temperature range, hardware ECC memory, and deterministic Book E interrupt response make it well-suited to industrial PLCs, motion controllers, and ruggedized SCADA systems. The PowerPC e500 architecture has a long heritage in industrial control, with mature real-time operating systems (VxWorks, INTEGRITY, Green Hills) plus soft-PLC runtimes such as CODESYS available for the MPC85xx family. The multiple UARTs, I²C, SPI, and GPIO interfaces connect directly to motor drives, encoders, and sensor networks, while the integrated Ethernet MACs handle deterministic EtherCAT or PROFINET traffic. Hardware SEC engine and secure boot protect against industrial espionage and firmware tampering.
Empfohlen
Aerospace and Defense Avionics
The MPC8547EVTAUJC's high reliability, hardware ECC, secure boot, and industrial temperature grade support deployment in avionics, unmanned aerial vehicle (UAV) flight controllers, and military communication systems. The PowerPC architecture has extensive DO-178B/C and MIL-STD-810 certification heritage in aerospace applications, with mature RTOS support and certified BSPs available. The integrated RapidIO interface connects to radiation-tolerant FPGAs and DSP clusters in radar and electronic warfare systems, while the hardware SEC engine provides FIPS-validated cryptography for secure communications. Designers building new platforms typically pair the MPC8547EVTAUJC with radiation-hardened memory and supervisory ASICs for full mission assurance.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MPC8547EVTAUJC – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | MPC8547EVTAUJB | MPC8548EVTAUJC | MPC8547VTAUJB | MPC8547EVTAQJC | MPC8547EVTANG |
|---|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29) | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same | 783-FCBGA (29x29) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Speed | 1.333 GHz | 1.333 GHz | 1.5 GHz | 1.0 GHz | 1.2 GHz | 1.0 GHz |
| Core Architecture | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 | PowerPC e500 |
| Security Engine | SEC 2.0 | SEC 2.0 | SEC 3.0 | SEC 2.0 | SEC 2.0 | SEC 2.0 |
| Memory Controller | DDR2-533 (ECC) | DDR2-533 (ECC) | DDR2-800 (ECC) | DDR2-533 (ECC) | DDR2-533 (ECC) | DDR2-533 (ECC) |
| Ethernet MACs | 4 x 10/100/1000 | 4 x 10/100/1000 | 4 x 10/100/1000 | 4 x 10/100/1000 | 4 x 10/100/1000 | 4 x 10/100/1000 |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Lifecycle Status | Obsolete | Obsolete | Active (last time buy) | Obsolete | Obsolete | Obsolete |
| SPE Co-Processor | Yes | Yes | Yes | Yes | Yes | Yes |
Wichtigste Unterscheidungsmerkmale
- Integrated hardware cryptographic acceleration (SEC 2.0) (vs. MPC8544VJALFA)
- 1.333 GHz e500 core with SPE co-processor (vs. MPC8547VTAUJB)
- Software-compatible upgrade path to MPC8548 (vs. MPC8569CVJAQLJB)
Designhinweise
The 783-FCBGA package with 1.0 mm ball pitch requires microvia or via-in-pad PCB technology. Design stackup with at least 6 layers: top + GND + 2 signal + GND + bottom. Use ENIG surface finish for high-reliability manufacturing. Place decoupling capacitors (0.1 uF + 1 uF) on every power pin within 5 mm of the BGA. Maintain a continuous ground plane beneath the FCBGA for signal integrity and thermal dissipation. Estimated: the thermal pad of the FCBGA conducts most of the 6-9 W dissipation; ensure adequate copper pour plus thermal vias for the 1.0 V core rail.
Estimated: the MPC8547EVTAUJC dissipates approximately 6-9 W at 1.333 GHz under full Ethernet and cryptographic load. With a junction-to-ambient thermal resistance (theta_JA) of approximately 12 C/W on a 6-layer JEDEC test board, junction temperature rises 70-110C above ambient. At an 85C industrial ambient, the junction could approach 195C, exceeding the 125C maximum. Designers must implement forced-air cooling, attach a heatsink via the thermal pad, or limit duty cycle. The +105C screening parts (UJC suffix) help but do not eliminate thermal management requirements.
Do not connect USB, RapidIO, and PCI Express SerDes pins to incompatible PHYs without verifying the SerDes protocol selection bits in the POR configuration. The MPC8547EVTAUJC multiplexes SerDes lanes between PCI Express and Serial RapidIO based on reset configuration word RCW[SRDS_LANE_SEL]. Confirm RCW values before layout finalization because changing RCW after PCB fabrication requires board rework. Also ensure DDR2 memory is configured for 1.8 V operation (not 2.5 V legacy DDR) - improper voltage damages the memory controller. Use ECC-enabled DIMMs to maintain hardware ECC protection.
The MPC8547EVTAUJC requires multi-rail power sequencing: 1.0 V core, 1.8 V / 2.5 V DDR2, 3.3 V I/O, and 1.0 V SerDes. Use a multi-channel PMIC such as the NXP MC34712 or equivalent to enforce proper sequencing and ramp rates. The 1.0 V core rail must reach 0.9 V within 50 ms of power-up for proper reset behavior. Decouple each rail with bulk capacitors (47-100 uF) plus 0.1 uF and 1 uF ceramics distributed beneath the FCBGA. Estimated: total quiescent current at idle is approximately 1.5 A, rising to 6-8 A under full processing load.
Compliance-Informationen
Lead-free FCBGA package per NXP product page. RoHS and REACH compliant. Not AEC-Q100 qualified (industrial MPU, not automotive grade). Obsolete lifecycle status as of 2026-10-16; check with Rochester Electronics for authorized aftermarket supply.
