Texas Instruments

MSP430F2131IDW - 16MHz 8KB Ultra-Low-Power MCU | TI

Teilenummer: MSP430F2131IDW ✓ Aktiv
20-pin SOIC (DW) Package 16 MHz Speed 8 KB (8K x 8) Memory
MOQ: 1 |

MSP430F2131IDW Übersicht

The Texas Instruments MSP430F2131IDW is an ultra-low-power 16-bit mixed-signal microcontroller operating at 16 MHz, with 8 KB of flash memory, 256 bytes of SRAM, and 16 general-purpose I/O pins in a 20-pin SOIC package. Its integrated 16-bit timer and analog comparator support compact sensing, timing, control, and signal-processing systems.

A mixed-signal microcontroller combines a digital processing core with analog or timing peripherals on one integrated circuit. The MSP430 architecture belongs to the microcontroller, embedded-processing, semiconductor, and power-management IC hierarchies. It is designed for compact systems that must acquire analog information, process it digitally, and then communicate results to a display, sensor network, or host controller. The MSP430F2131 is positioned for low-power, mixed-signal embedded designs rather than high-pin-count connectivity or high-memory applications.

The principal features are a 16 MHz clock, 8 KB of flash memory, and 256 bytes of SRAM. Sixteen I/O pins provide interfaces for sensors, actuators, indicators, and external control logic. A built-in 16-bit timer supports event counting, periodic timing, and timing-sensitive control functions, while the analog comparator enables threshold-based signal decisions. These resources allow a compact design to perform measurement and control without relying on a separate timer IC.

The MSP430F2131 uses a 16-bit CPU and an integrated mixed-signal peripheral set optimized for low-power embedded processing. Its 8 KB flash provides program storage, while the 256-byte SRAM accommodates working variables, stack operations, and short-lived data buffers. Designers should size firmware and RAM carefully because the memory budget is modest compared with contemporary 32-bit microcontrollers. The 20-pin SOIC footprint supports conventional surface-mount assembly while keeping the device compact.

Typical uses include battery-powered sensor nodes, industrial condition-monitoring modules, simple measurement instruments, timers, and low-power control boards. The timer and comparator can work together in applications such as threshold detection, pulse counting, event duration measurement, and basic closed-loop control. The 16 I/O pins allow the MCU to supervise simple human-interface elements while retaining communication pins for a host or peripheral.

For PCB implementation, use the manufacturer pin-description table and recommended application circuit when assigning tracks. Pay particular attention to decoupling, exposed programming and reset behavior, unused-pin treatment, and the clock implementation. Confirm the required supply range, analog-reference arrangement, and peripheral limits against the manufacturer datasheet before release.

This page combines the MSP430F2131IDW's core specifications with package guidance, sourcing workflows, drop-in replacement analysis, and practical mixed-signal design considerations. It is intended to accelerate component selection, firmware planning, PCB review, and prototype bring-up for engineers working with the MSP430x21x1 family.

Drop-in-Alternativen für MSP430F2131IDW – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

MSP430F2131TDW

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 20-pin SOIC (DW)
Same 16 MHz clock, 8 KB flash, 256 B SRAM, 16 I/O pins, timer, and comparator; commercial temperature grade replaces the target's industrial grade, with approximately 25 C less low-temperature capability and 35 C less high-temperature capability

📋 Referenzalternative (nicht im Katalog)

MSP430F2131IDW Grenzwerte & elektrische Eigenschaften

CPU Architecture 16-bit RISC
Maximale Taktfrequenz 16 MHz
Flash Memory 8 KB (8K x 8)
Static RAM 256 B
General-Purpose I/O Pins 16 pins
Timer Resolution 16-bit
Analog Comparator 1 integrated analog comparator
Betriebstemperaturbereich Industrial grade
Gehäuse 20-pin SOIC (DW)
Package Width 7.50 mm
Lead Form Gull wing
Montageart Surface mount

MSP430F2131IDW 7.50 mm Pinbelegungsleitfaden

Pinbelegung für MSP430F2131IDW (7.50 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MSP430F2131IDW im 7.50 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MSP430F2131IDW.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MSP430F2131IDW ist geeignet für 6 Anwendungs: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Timing and Event-Counting Control, Threshold Detection and Signal Qualification, Low-Power Data Acquisition, Compact Measurement Instruments.

🔋

Battery-Powered Sensor Nodes

The MSP430F2131IDW fits compact sensor nodes because its 16 MHz 16-bit CPU can process acquired data locally while the 256-byte SRAM supports short working buffers and control state. The integrated 16-bit timer can schedule sampling or wake events, while the analog comparator supports threshold decisions around a sensed voltage. A typical node would power the MCU and sensor from a common low-energy rail, wake for a measurement, store the result in flash when required, and return to a low-power state between updates. The 16 I/O pins provide enough connection points for a sensor, status indicator, and host interface. Actual battery life must be calculated from the node's standby current, measurement duration, active current, and duty cycle rather than from the CPU frequency alone.

🏭

Industrial Condition Monitoring

The MSP430F2131IDW is appropriate for industrial condition-monitoring modules that must combine sensing, timing, and local decision-making. Its comparator can evaluate a conditioned analog signal against an internal or external reference, and its 16-bit timer can measure intervals, count events, or establish a periodic sampling schedule. The 8 KB flash is suitable for a compact control program rather than a large data logger, while the 16 I/O pins can connect a sensor, alarm output, and host-control interface. In a factory installation, the industrial temperature grade is the relevant distinction from the commercial-grade MSP430F2131TDW. Designers should add input conditioning and protection appropriate to the measured signal and verify the operating limits for the complete sensor chain.

⏱️

Timing and Event-Counting Control

The integrated 16-bit timer makes the MSP430F2131IDW suitable for compact timing and event-counting controllers. It can count external events, measure elapsed intervals, generate periodic control actions, and coordinate other embedded functions without requiring a separate timer IC. The 16 MHz CPU provides sufficient throughput for basic digital control and status handling, while the 8 KB flash supports a focused application program. A practical implementation might count pulses from a sensor or operator input, drive an actuator through one of the 16 I/O pins, and report a state to a host interface. Design the external signal levels and timing margins carefully, and use the manufacturer pin and electrical tables to establish valid input frequency and output-drive requirements.

📈

Threshold Detection and Signal Qualification

The MSP430F2131IDW can implement compact threshold-detection systems using its integrated analog comparator. A conditioned sensor signal can be compared with a reference, allowing firmware to identify crossings, qualify noisy events, or switch an output without continuously converting the signal. The 16-bit timer can measure how long the signal remains above or below the threshold, while the CPU adds decision logic and host communication. This arrangement is useful for simple industrial switches, level detectors, and event interfaces where a complete ADC and high-memory platform would be unnecessary. Component selection must ensure that the comparator's common-mode range, reference behavior, and response characteristics suit the analog node. Follow the manufacturer application diagram for reference and bypass connections.

🧩

Low-Power Data Acquisition

The MSP430F2131IDW suits low-power data-acquisition front ends that need local sampling control and digital processing. Its 8 KB flash stores firmware, 256 bytes of SRAM supports short measurement buffers, and the 16-bit timer can pace periodic conversions or external trigger handling. The 16 I/O pins can support a sensor interface, status signaling, and communication to a host. Although the device is optimized for comparator-based mixed-signal designs, an external converter can be used when wider analog acquisition is required. System partitioning should account for the limited RAM and the conversion time of any external ADC. Use the manufacturer clock, reset, and decoupling recommendations to prevent digital activity from disturbing sensitive analog measurements.

🔧

Compact Measurement Instruments

The MSP430F2131IDW can serve as the control core of a compact measurement instrument because it integrates processing, timing, comparison, and digital I/O in one 20-pin SOIC device. A front-end analog network can condition the quantity being measured, the comparator can perform a threshold decision, and the timer can manage a measurement interval or test sequence. Firmware can then calculate a result, control a local indicator, and send the measurement to a host. The 8 KB flash and 256-byte SRAM are appropriate for focused embedded logic rather than complex data logging. For handheld products, operation should be structured around the MCU's low-power modes, with the display and analog front end also placed into low-power states between measurements to maximize battery life.

Zusammenfassung der empfohlenen Produkte

MSP430F2131IDWR Tape-and-reel ordering option for the same target MCU Verwendet in: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Threshold Detection and Signal Qualification, Low-Power Data Acquisition, Compact Measurement Instruments MSP430F2131TDW Same-family 20-pin SOIC MCU for commercial-temperature designs Verwendet in: Battery-Powered Sensor Nodes, Timing and Event-Counting Control, Threshold Detection and Signal Qualification, Compact Measurement Instruments MSP430F2131IDW Texas Instruments Verwendet in: Industrial Condition Monitoring, Timing and Event-Counting Control, Low-Power Data Acquisition
What are the key specifications of MSP430F2131IDW that engineers should know?
The MSP430F2131IDW is a 16-bit mixed-signal MCU with a 16 MHz clock, 8 KB of flash memory, 256 bytes of SRAM, 16 I/O pins, a 16-bit timer, and an analog comparator in a 20-pin SOIC package. According to the Texas Instruments MSP430F2131 product page, the device is intended for low-power sensor acquisition, digital processing, display, and host-transmission systems. Its compact memory and mixed-signal feature set make it most appropriate for embedded controls that do not require a large application framework or high-speed external interface.
What is MSP430F2131IDW and what is it used for?
The MSP430F2131IDW is an ultra-low-power 16-bit mixed-signal microcontroller designed for embedded sensing and control. According to Texas Instruments, it combines a 16 MHz CPU, 8 KB of flash, 256 bytes of SRAM, a 16-bit timer, an analog comparator, and 16 I/O pins. Typical implementations include sensor systems that capture analog signals, convert them into digital values, process those values, and transmit them to a host. It is well suited to compact, cost-sensitive control and measurement products.
Where can I download the MSP430F2131IDW datasheet PDF?
The MSP430F2131IDW datasheet can be downloaded from the Texas Instruments product-information link for MSP430F2131. The manufacturer datasheet covers the MSP430x21x1 family, including CPU behavior, memory, timers, comparator functions, electrical characteristics, pin descriptions, and application information. Use the ordering information within the manufacturer documentation to confirm that MSP430F2131IDW refers to the 20-pin SOIC DW package and industrial-grade ordering option.
Where can I find the MSP430F2131IDW pinout and package information?
The MSP430F2131IDW pinout is located in the pin-description section of the Texas Instruments MSP430x21x1 mixed-signal microcontroller datasheet. The device is identified as a 20-pin SOIC with the DW package code and gull-wing leads. Use the manufacturer's pin table for exact signal names, recommended analog connections, programming pins, reset behavior, supply pins, and no-connect guidance rather than inferring assignments from the package outline.
What can replace MSP430F2131IDW on an existing PCB?
MSP430F2131TDW is the closest same-package replacement identified for a 20-pin SOIC design, while MSP430F2131IDWR is the tape-and-reel ordering option for the same IDW device. The TDW option changes the temperature-grade ordering suffix, so the replacement must be checked against the original environmental requirements. Before production use, confirm package drawing, pin functions, clock configuration, firmware support, and operating-temperature limits in the manufacturer datasheet.
Is MSP430F2131IDW the same as MSP430F2131TDW?
No. MSP430F2131IDW and MSP430F2131TDW share the MSP430F2131 device family and 20-pin SOIC format, but their ordering suffixes identify different temperature grades. The IDW designation is the industrial-temperature option, while TDW designates the commercial-temperature option. Their core resources—16 MHz operation, 8 KB of flash, 256 bytes of SRAM, a 16-bit timer, a comparator, and 16 I/O pins—remain the basis for considering TDW as a footprint-compatible substitution.
When should I choose MSP430F2131IDW over MSP430F2131TDW?
Choose MSP430F2131IDW when the assembly must operate across the industrial temperature range or when the original BOM specifies the IDW ordering code. MSP430F2131TDW is appropriate only when the design remains within the commercial temperature range and its environmental requirements match the TDW grade. Because both use the 20-pin SOIC family format, confirm the exact temperature limits, grade markings, and qualification expectations before substituting one ordering code for the other.
Is MSP430F2131IDW suitable for battery-powered sensor nodes?
The MSP430F2131IDW is suitable for battery-powered sensor nodes that require low-power mixed-signal processing rather than high connectivity or large memory. Its 16 MHz 16-bit CPU, comparator, timer, 16 I/O pins, 8 KB flash, and 256-byte SRAM support local sensing and control. Power-life performance depends on the selected operating mode, clock configuration, sensor standby current, and duty cycle, which should be evaluated using the manufacturer low-power guidance and the complete node power budget.
What is the best Texas Instruments equivalent for MSP430F2131IDW?
The best same-package alternative identified is MSP430F2131TDW, provided the target system falls within that part's commercial-temperature limits. Both devices use the 20-pin SOIC format and retain the 16 MHz, 8 KB flash, 256-byte SRAM, timer, comparator, and 16-I/O-pin resource set. The decisive selection criterion is environmental grade rather than core MCU resources. Confirm pin behavior, supply limits, and qualification requirements in the manufacturer documentation before approving the substitution.
Where can I buy MSP430F2131IDW online?
Use the Request a Quote form on this page to request MSP430F2131IDW availability, lead time, and an order quotation from XAIPART. The exact industrial-grade 20-pin SOIC ordering code should be stated in the request to avoid confusion with other MSP430F2131 package, temperature-grade, or tape-and-reel variants. Confirmation should also cover factory packaging, quantity, and any required traceability or compliance documentation.
What is the price of MSP430F2131IDW?
The current unit price for MSP430F2131IDW should be obtained through the Request a Quote form on this page. Quote requests confirm the exact MPN, current inventory, order quantity, delivery expectations, and any volume pricing. Because the IDW suffix identifies the industrial-grade 20-pin SOIC configuration, include MSP430F2131IDW in full when requesting a quotation rather than referring only to the MSP430F2131 family.
What is the lead time and stock status for MSP430F2131IDW?
Current stock and lead time for MSP430F2131IDW should be confirmed through the Request a Quote form on this page. Availability can vary with factory inventory, order quantity, and the required delivery date. Include the complete MPN, target quantity, and production schedule in the request so the quotation can reflect the correct industrial-grade 20-pin SOIC configuration.
MSP430F2131IDW vs MSP430F2131IDWR: which ordering option should be selected?
MSP430F2131IDW and MSP430F2131IDWR identify the same 20-pin SOIC MSP430F2131IDW configuration with different factory shipment formats, so their electrical specifications are equivalent. Select the non-reel IDW ordering code when the required delivery format matches it; select IDWR for tape-and-reel production handling. Confirm reel dimensions, orientation, moisture-protection requirements, and the number of devices per reel against the manufacturer's packing information before releasing the assembly.
What should engineers check when designing an MSP430F2131IDW PCB?
Engineers should verify the pin assignments, supply connections, decoupling, clock implementation, programming interface, reset behavior, and unused-pin treatment in the manufacturer application information. The device's 20-pin SOIC footprint provides 16 I/O pins, but available communications and peripheral multiplexing must match the selected firmware configuration. Also plan programming and test access before layout closure, and use the exact manufacturer land pattern rather than deriving it from an unrelated SOIC package.
Does MSP430F2131IDW support RoHS and AEC-Q100 qualification?
RoHS and AEC-Q100 status must be confirmed from the current Texas Instruments product documentation and orderable-part information for MSP430F2131IDW. The industrial-temperature ordering suffix indicates an extended commercial/industrial temperature class, but it does not by itself establish AEC-Q100 automotive qualification. Automotive, industrial, or regulatory production requirements should therefore be documented separately from the device's electrical temperature grade.

Technische Referenzdaten für MSP430F2131IDW – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose MSP430F2131IDW for compact mixed-signal designs that specifically require the industrial temperature grade, 16 MHz processing, 8 KB of flash, 256 bytes of SRAM, 16 I/O pins, a 16-bit timer, and an analog comparator in a 20-pin SOIC package. It is particularly useful for sensor nodes, condition-monitoring modules, timers, and simple measurement instruments where local processing and low-power operation matter. MSP430F2131TDW is the practical footprint-compatible alternative when the equipment remains within its commercial temperature range; otherwise, the narrower environmental margin makes it unsuitable. MSP430F2131IDWR is primarily an assembly-format choice because it provides the same IDW configuration in tape-and-reel format, not a different MCU. Before selecting any ordering code, confirm the power requirements, pin functions, clock arrangement, programming interface, temperature limits, and analog operating conditions in the manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt MSP430F2131TDW
Brand Texas Instruments Texas Instruments
Package 20-pin SOIC (DW) 20-pin SOIC (DW), same package
CPU Architecture 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz
Flash Memory 8 KB 8 KB
Static RAM 256 B 256 B
General-Purpose I/O Pins 16 pins 16 pins
Timer Resolution 16-bit 16-bit
Analog Comparator 1 integrated analog comparator 1 integrated analog comparator
Temperature Grade Industrial grade Commercial grade

Wichtigste Unterscheidungsmerkmale

  • Industrial-temperature ordering option (vs. MSP430F2131TDW)
  • Complete core resource match for footprint-compatible redesigns (vs. MSP430F2131TDW)
  • Mixed-signal integration reduces external support components (vs. MSP430F2131TDW)

Designhinweise

Plan the supply rail and decoupling around the manufacturer application circuit. Place the input bypass capacitor close to the device's supply pin and provide adequate local return paths to the ground reference. If the MCU monitors an analog threshold, route the comparator reference and signal away from switching nodes and keep their return current over a continuous ground path. Check the minimum on-state supply at the highest operating frequency and temperature before finalizing the rail.

Use the exact 20-pin DW package land pattern and follow the manufacturer's pin-numbering orientation. Keep clock and programming-related routes short, and reserve test points that allow programming, reset, and debug access without removing the MCU. Because the package is a surface-mount gull-wing SOIC, inspect solder-joint fillets after assembly and verify that the board's solder mask and paste pattern match the specified terminal geometry.

Do not treat MSP430F2131IDW, MSP430F2131TDW, and MSP430F2131IDWR as interchangeable without checking the suffix intent. IDW and IDWR represent different factory shipment formats of the same target configuration, while TDW represents a different temperature grade. Also avoid assuming that a comparison-based design has a general-purpose ADC; verify the analog resources and input limits in the MSP430x21x1 datasheet before routing sensor signals.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The industrial temperature designation does not by itself establish AEC-Q100 qualification. Current environmental and material compliance should be confirmed against the Texas Instruments product documentation and orderable-part records.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MSP430F2131IDW datasheet MSP430F2131IDW pinout MSP430F2131IDW datasheet pdf MSP430F2131 20-SOIC pinout MSP430F2131IDW equivalent MSP430F2131IDW replacement MSP430F2131IDW vs MSP430F2131TDW MSP430F2131IDW vs MSP430F2131IDWR MSP430F2131 16MHz 8KB MCU Texas Instruments MSP430F2131IDW MSP430F2131IDW price MSP430F2131IDW stock MSP430F2131IDW lead time MSP430F2131 mixed signal application circuit

Verwandte Bauteile & Begriffe

Texas Instruments MSP430F2131IDW MSP430F2131TDW MSP430F2131IDWR MSP430x21x1 mixed-signal microcontroller microcontroller embedded processor 16-bit RISC CPU semiconductor power management IC ultra-low-power 16 MHz 8 KB flash memory 256-byte SRAM 16-bit timer analog comparator general-purpose I/O 20-pin SOIC SOIC family surface-mount package industrial temperature grade sensor node condition monitoring low-power data acquisition
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen