Texas Instruments

MSP430F4361IPN - 8MHz 16-Bit MCU | Texas Instruments

Teilenummer: MSP430F4361IPN ✓ Aktiv
1.8 V to 3.6 V Vdss 80-pin LQFP (PN), 12 x 12 mm Package 8 MHz Speed 24 KB (24K x 8 + 256 B) Memory
MOQ: 1 |

MSP430F4361IPN Übersicht

The Texas Instruments MSP430F4361IPN is a 16-bit mixed-signal microcontroller operating at up to 8 MHz, with 24 KB of Flash memory, 1 KB of SRAM, and an 80-pin LQFP (PN) package. Its integrated resources include a comparator, SPI and UART interfaces, and a 160-segment LCD controller. The device is designed for low-power embedded, industrial-control, metering, sensor-interface, and human-machine-interface applications.

A mixed-signal microcontroller combines a digital processor with analog and communication peripherals on one integrated circuit. The MSP430 belongs to the broader mixed-signal MCU hierarchy, where a 16-bit RISC core executes control software while embedded comparators and serial interfaces reduce the need for external components. The MSP430F4361IPN is therefore positioned between a basic general-purpose microcontroller and a more complex application processor, emphasizing low power, compact integration, and deterministic control in a 12 x 12 mm package.

Key features include an 8 MHz maximum operating frequency, 24 KB of Flash, 1 KB of SRAM, a 16-bit RISC architecture, and a 125 ns minimum instruction-cycle time. The MCU also provides a comparator, SPI, UART, and a controller capable of driving 160 LCD segments. These resources allow designers to consolidate sensing, display, and communications functions while retaining a compact embedded control architecture.

The MSP430 architecture uses a 16-bit RISC core with 16-bit registers and constant generators to improve code efficiency. According to the manufacturer datasheet, the device supports five low-power operating modes and can wake from standby in less than 6 microseconds. This combination makes the MCU suitable for duty-cycled systems that spend substantial time in low-energy states while retaining fast response to external activity.

Typical uses include low-energy flow and utility meters, industrial sensor controllers, compact instrumentation, battery-operated monitoring equipment, and LCD-based human-machine interfaces. SPI can connect external sensors or memory, UART supports system debugging and point-to-point communication, and the segment LCD controller reduces display-driver complexity in meter and panel designs.

Designers should account for the 1.8 V to 3.6 V operating range, confirm peripheral assignments against the package pinout, and use the manufacturer’s recommended decoupling and clock configuration. The 80-pin LQFP footprint offers more I/O than smaller MCU packages, but its 12 x 12 mm body requires careful PCB routing and thermal verification for the assembled product.

This page combines device specifications, package information, practical application guidance, comparison criteria, and verified same-package replacement candidates. These engineering details help designers evaluate memory capacity, peripheral availability, display support, power behavior, and PCB compatibility before committing the MSP430F4361IPN to a production design.

Drop-in-Alternativen für MSP430F4361IPN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit MSP430F4361IPN (gleiche Bauform und Footprint) – abweichend in Flash Memory, Package, Comparator, Operating Temperature, SRAM.

Texas Instruments
Flash Memory: 16 KB
Package: 80-pin LQFP (PN), 12 mm × 12 mm
SRAM: 512 B
Vergleichen mit MSP430F4361IPN →
Texas Instruments
Flash Memory: 24 KB
Package: 80-pin LQFP (PN), 12 mm x 12 mm
Vergleichen mit MSP430F4361IPN →
Texas Instruments
Flash Memory: 32 KB (32K x 8 plus 256 B)
Package: 80-pin LQFP (PN), 12 mm x 12 mm
Comparator: 1 integrated comparator
Vergleichen mit MSP430F4361IPN →

MSP430F436IPN

✅ Drop-In
Texas Instruments
📦 80-LQFP (12x12) (PN)
16-bit MSP430 RISC · 8 MHz · 24 KB · 256 bytes · 1 KB · 12-bit · Integrated · SPI and UART

Preis auf Anfrage

Datenblatt ansehen →

MSP430F435IPN

✅ Drop-In
Texas Instruments
📦 80-LQFP (12x12) (PN)
16-bit RISC · 8 MHz · 16 KB · 512 B · 12 bit · Integrated · SPI and UART · 160 segments

Preis auf Anfrage

Datenblatt ansehen →

MSP430F437IPN

✅ Drop-In
Texas Instruments
📦 80-LQFP (12x12) (PN)
16-bit mixed-signal MCU · MSP430 CPU16 RISC · 8 MHz · 32 KB (32K x 8 plus 256 B) · 1 KB · 12 bit · 1 integrated comparator · 1 SPI interface

Preis auf Anfrage

Datenblatt ansehen →

MSP430F4361IPN Grenzwerte & elektrische Eigenschaften

CPU Architecture 16-bit RISC
Maximale Taktfrequenz 8 MHz
Minimum Instruction Cycle Time 125 ns
Flash Memory 24 KB (24K x 8 + 256 B)
SRAM 1 KB
Register Width 16 bit
Betriebsversorgungsspannung 1.8 V to 3.6 V
Betriebstemperatur -40 °C to +85 °C
Comparator Integrated
SPI Interfaces 1
UART Interfaces 1
LCD Segment Capacity 160 segments
Low-Power Modes 5 modes
Standby Wake-Up Time Less than 6 µs
Gehäuse 80-pin LQFP (PN), 12 x 12 mm
Montageart Surface mount

MSP430F4361IPN 80-pin lqfp (pn), 12 x 12 mm Pinbelegungsleitfaden

Pinbelegung für MSP430F4361IPN (80-pin lqfp (pn), 12 x 12 mm-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.

Pinbelegungsdiagramm für MSP430F4361IPN im 80-pin lqfp (pn), 12 x 12 mm-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für MSP430F4361IPN.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

MSP430F4361IPN ist geeignet für 6 Anwendungs: Industrial Sensor Controller, Smart Utility Meter, Battery-Powered Monitoring Instrument, LCD-Based Human-Machine Interface, Serial Data Acquisition System, Compact Industrial Control Panel.

🏭

Industrial Sensor Controller

The MSP430F4361IPN fits industrial sensor nodes that require local signal comparison, periodic sampling, and low-energy operation. Its integrated comparator can support threshold-based sensing, while the 16-bit CPU processes measurements and manages the SPI interface to external sensors or converters. The MCU provides 24 KB of Flash for application code and 1 KB of SRAM for working memory. Operating from 1.8 V to 3.6 V supports compact sensor boards, while the five low-power modes and standby wake-up below 6 microseconds help reduce the duty cycle. The design must confirm comparator input routing and pin multiplexing against the PN package drawing before final routing.

🔧

Smart Utility Meter

The MSP430F4361IPN is appropriate for metering products that combine measurement, serial communications, and a local segmented display. The 160-segment LCD controller can drive meter displays directly, while the comparator supports threshold or pulse-related measurement functions. Its 24 KB Flash accommodates metering algorithms and communication firmware, and the 1 KB SRAM supports short-term data processing. The 8 MHz CPU provides sufficient throughput for background sampling and UART-based communications. Use the device’s low-power modes between measurement intervals, and verify LCD segment allocation, comparator routing, and supply requirements in the manufacturer datasheet and package documentation.

🔋

Battery-Powered Monitoring Instrument

The MSP430F4361IPN supports battery-powered monitoring instruments that alternate between active measurement and low-energy standby states. Its five low-power modes, including a standby wake-up time of less than 6 microseconds, allow the controller to respond quickly to timed or external events without remaining continuously active. The integrated comparator can monitor a sensor threshold, and SPI or UART can connect to a sensing front end or data logger. The 1.8 V to 3.6 V supply range supports low-voltage power systems, while 24 KB of Flash stores application and logging-control code. Calculate battery life using the operating current, duty cycle, and wake events for the selected clock configuration.

📺

LCD-Based Human-Machine Interface

The MSP430F4361IPN can serve as the central controller in a compact LCD-based human-machine interface because it integrates a 160-segment LCD controller with 24 KB of Flash and 1 KB of SRAM. The segment display can present measurements, status indicators, or configuration values without requiring a separate display controller. The MCU’s UART provides a simple host or service interface, while SPI can connect configuration storage or expansion components. At 8 MHz, the 16-bit processor can manage display updates, input handling, and background control tasks. Validate segment mapping, electrical drive requirements, and multiplexing details from the manufacturer documentation before schematic capture.

📡

Serial Data Acquisition System

The MSP430F4361IPN is well suited to a compact serial acquisition system where sensor data arrives through SPI and status information is exchanged through UART. The 8 MHz 16-bit CPU can service serial interrupts and apply acquisition logic, while the comparator provides an independent threshold function for alarms or trigger events. With 24 KB of Flash and 1 KB of SRAM, the device can hold a dedicated control program and a working data buffer. The 1.8 V to 3.6 V operating range allows integration with low-voltage sensor assemblies. Firmware should include timeout and fault handling for both serial interfaces, and the PCB should reserve test points for debugging and firmware recovery.

🏭

Compact Industrial Control Panel

The MSP430F4361IPN fits compact industrial control panels that combine a segmented status display, local sensing, and serial communications. The integrated LCD controller supports up to 160 segments, the comparator supports local threshold decisions, and UART or SPI provides connectivity to sensors, service equipment, or an upstream controller. Its 5, low-power architecture is useful in panels that spend most of their time displaying status while waking for user input or scheduled updates. The 80-pin LQFP package provides a generous pin budget for control signals and communications. Final qualification should verify industrial temperature requirements, ESD strategy, isolation boundaries, and firmware behavior during display or communications faults.

What are the key specifications of MSP430F4361IPN that engineers should know?
The MSP430F4361IPN is an 8 MHz, 16-bit mixed-signal MCU with 24 KB of Flash, 1 KB of SRAM, and an 80-pin LQFP package. According to the Texas Instruments product page, it includes a comparator, SPI, UART, and a 160-segment LCD controller. The device operates from 1.8 V to 3.6 V across -40 °C to +85 °C, making it suitable for low-power embedded and industrial control designs.
What is MSP430F4361IPN used for?
The MSP430F4361IPN is used for low-power embedded control, including metering, industrial sensors, compact instrumentation, and LCD-based interfaces. Its 24 KB Flash supports embedded application code, while 1 KB of SRAM provides working memory. The integrated comparator, SPI, UART, and 160-segment LCD controller allow a design to combine sensing, serial communication, and display control without requiring several separate devices.
What is the operating voltage of MSP430F4361IPN?
The MSP430F4361IPN operates from 1.8 V to 3.6 V. The manufacturer product information identifies this range for the MSP430F4361IPN configuration. Keeping the supply within that interval is essential for correct CPU, memory, comparator, and serial-interface operation. Board-level designs should also observe the recommended decoupling and power-sequencing requirements in the manufacturer datasheet.
Does MSP430F4361IPN support LCD displays?
Yes, the MSP430F4361IPN includes a controller capable of driving 160 LCD segments. According to the Texas Instruments product page, this display capability complements the MCU’s 24 KB Flash, 1 KB SRAM, comparator, SPI, and UART resources. It is particularly useful for meters, compact panels, measurement instruments, and other applications that need a segmented display without a separate display controller.
What is the difference between MSP430F4361IPN and MSP430F436IPN?
The MSP430F4361IPN is identified as the comparator-equipped member of the MSP430F436 family, while the MSP430F436 product family also includes configurations described with a 12-bit ADC. Both the target and MSP430F436IPN use the 80-pin LQFP (PN) package and share the 8 MHz, 24 KB Flash, and 1 KB SRAM configuration. Verify the exact peripheral arrangement and pin functions before substituting one for the other.
When should I choose MSP430F4361IPN over MSP430F435IPN?
Choose the MSP430F4361IPN when the design specifically needs its comparator, 160-segment LCD controller, SPI, UART, 24 KB Flash, and 1 KB SRAM in an 80-pin LQFP. The MSP430F435IPN is a same-package MSP430 option that may serve related designs, but its memory and peripheral differences can affect firmware and board compatibility. Confirm device-specific functions in the manufacturer pinout and datasheet before final selection.
Is MSP430F4361IPN suitable for battery-operated equipment?
The MSP430F4361IPN is suitable for battery-operated equipment when the design can exploit its low-power modes. The manufacturer datasheet identifies five low-power modes and a standby wake-up time of less than 6 microseconds. These characteristics support duty-cycled sensing and control while the 8 MHz CPU provides processing capacity for protocol handling, data acquisition, and local display functions.
What can replace MSP430F4361IPN?
The MSP430F436IPN and MSP430F437IPN are documented same-family comparison candidates in the 80-pin LQFP (PN) format, while MSP430F435IPN is another same-package MSP430 reference. These are not guaranteed feature-identical replacements: memory capacity, comparator or ADC availability, and LCD resources can differ. Treat any substitution as a design review covering memory size, peripheral functions, pin assignments, software, and qualification.
Is MSP430F4361IPN the same as MSP430F436IPN?
No, MSP430F4361IPN and MSP430F436IPN are related but not necessarily identical devices. The target is the MSP430F4361 configuration with a comparator and 160-segment LCD capability, while MSP430F436IPN belongs to the broader MSP430F436 family. Both are associated with an 8 MHz CPU, 24 KB Flash, 1 KB SRAM, and an 80-pin LQFP package, but board-level substitution requires peripheral-by-peripheral verification.
Where can I download the MSP430F4361IPN datasheet PDF?
The official MSP430F4361 product page is the appropriate starting point for the manufacturer datasheet and supporting documentation. It links to the MSP430F4361 family information, ordering details, and technical resources. Use the pin-description table, recommended application circuit, electrical characteristics, and errata when assigning PCB tracks or finalizing a low-power embedded design.
Where can I find the MSP430F4361IPN pinout?
The MSP430F4361IPN pinout is identified by the PN package designation, which denotes an 80-pin LQFP body measuring 12 x 12 mm. Use the manufacturer’s pin-description table and package drawing when assigning signals. The exposed board footprint and pad geometry must match the PN package drawing, and alternate functions should be checked against the device’s comparator, LCD, SPI, UART, clock, and reset requirements.
Where to buy MSP430F4361IPN online?
Use the Request a Quote form on this page to request MSP430F4361IPN availability, unit pricing, and quantity lead time. The form provides a direct purchasing channel for the exact MSP430F4361IPN orderable part rather than a generic MSP430F436 family designation. Confirm the package suffix, shipment quantity, and target delivery schedule in the quotation response.
What is the price of MSP430F4361IPN?
The current unit price for MSP430F4361IPN is obtained through the Request a Quote form on this page. The quote response should be used for the exact package suffix and requested purchasing quantity. Because pricing and inventory can change, obtain a written quotation for production quantities rather than relying on an indirect or family-level price reference.
What is the lead time and stock status for MSP430F4361IPN?
Request the current MSP430F4361IPN lead time and stock position through the Request a Quote form on this page. Include the required quantity, production schedule, and shipment packaging in the request. The manufacturer lists the MSP430F4361 family as an active product, while current stocking by region and quantity should be confirmed through the quotation response.
Is there a cross-brand drop-in replacement for MSP430F4361IPN?
No cross-brand drop-in replacement for MSP430F4361IPN has been established from the manufacturer and distributor records reviewed for this page. A valid replacement would require the same 80-pin LQFP (PN) footprint, compatible electrical limits, equivalent memory resources, and matching LCD, comparator, SPI, and UART functions. Use the Request a Quote form for sourcing support while performing a board-level and firmware compatibility review.
What is the power consumption profile of MSP430F4361IPN?
The MSP430F4361IPN supports five low-power modes and wakes from standby in less than 6 microseconds, according to the manufacturer datasheet. Exact active and standby currents depend on clock selection, operating mode, peripheral activity, and supply voltage. Use the datasheet current tables for the final battery-life calculation and retain operating time, voltage, and peripheral state with the test configuration.

Technische Referenzdaten für MSP430F4361IPN – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the MSP430F4361IPN when the product needs an 8 MHz 16-bit MSP430 core, 24 KB Flash, 1 KB SRAM, an integrated comparator, SPI, UART, and a 160-segment LCD controller in an 80-pin LQFP package. It is particularly attractive for meters, low-power industrial sensors, and compact display-based controllers. Consider MSP430F436IPN when the broader family description and its identified 12-bit ADC configuration align better with the analog requirements. Evaluate MSP430F435IPN and MSP430F437IPN only after confirming memory capacity, analog and display peripherals, pin multiplexing, and firmware support. Package compatibility alone does not establish functional equivalence. For designs requiring a different analog converter, greater memory, or a different low-power architecture, use the manufacturer comparison resources and perform a complete schematic, firmware, and qualification review before substitution.

Vergleich mit Alternativen

Parameter Dieses Produkt MSP430F436IPN MSP430F435IPN MSP430F437IPN
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 80-LQFP (12x12) (PN) 80-LQFP (12x12) (PN) 80-LQFP (12x12) (PN) 80-LQFP (12x12) (PN)
CPU Architecture 16-bit RISC 16-bit MSP430 16-bit MSP430 16-bit MSP430

Wichtigste Unterscheidungsmerkmale

  • Comparator-equipped MSP430F4361 configuration (vs. MSP430F436IPN)
  • Dedicated 160-segment LCD controller (vs. MSP430F435IPN)
  • Complete embedded resource integration (vs. MSP430F437IPN)

Designhinweise

Estimate the average power budget from the selected operating mode, clock frequency, I/O activity, and supply voltage. The device supports five low-power modes and wakes from standby in less than 6 microseconds, so firmware can periodically sleep between measurement or communication events. Compare the resulting duty cycle with the battery capacity, regulator efficiency, and peak current requirement rather than using active-mode consumption alone.

Use the manufacturer’s PN package drawing and recommended layout to reproduce the 80-pin LQFP land pattern, pad dimensions, and copper clearances. Place decoupling capacitors close to the device’s supply pins and provide a low-impedance ground reference for the comparator and communication interfaces. Because the package is 12 x 12 mm and uses fine-pitch leads, confirm paste volume, solder paste printing, and assembly capability before releasing the PCB.

Do not substitute MSP430F436, MSP430F435, or MSP430F437 devices based on package and CPU family alone. The 80-pin PN footprint can be shared while memory size, comparator or ADC resources, LCD capabilities, and peripheral multiplexing differ. Verify the complete orderable MPN, pin functions, memory map, peripheral availability, clock settings, and software driver assumptions before approving a replacement.

Plan the serial interfaces and comparator inputs early in the PCB layout. Keep SPI traces short, provide a continuous ground reference beneath the interface area, and avoid routing sensitive comparator inputs beside high-current switching paths. If the LCD is used, check the recommended segment and common-backplane connections because display routing can occupy many of the package’s 80 pins and influence placement of other signals.

Validate clock settings, wake-up behavior, and peripheral timing across the full 1.8 V to 3.6 V supply range. The minimum instruction-cycle time is 125 ns, but real communication timing also depends on the selected clock, divider configuration, and peripheral clock source. Use oscilloscope measurements on SPI and UART activity during low-power transitions, and include fault recovery for interrupted serial transfers in the firmware design.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The manufacturer product page identifies an operating temperature range of -40 °C to +85 °C, but no explicit compliance declarations are stated in the cited product records.

Daten verifiziert am: 2026-11-15 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

MSP430F4361IPN MSP430F4361IPN datasheet MSP430F4361IPN specifications MSP430F4361IPN pinout MSP430F4361IPN datasheet pdf MSP430F4361IPN equivalent MSP430F4361IPN replacement MSP430F4361IPN cross reference MSP430F4361IPN vs MSP430F436IPN MSP430F4361IPN LQFP 80 pin MSP430F4361IPN application circuit Texas Instruments MSP430F4361IPN MSP430F4361IPN price MSP430F4361IPN stock MSP430F4361 8MHz 24KB Flash

Verwandte Bauteile & Begriffe

Texas Instruments MSP430F4361IPN MSP430F436IPN MSP430F435IPN MSP430F437IPN MSP430 mixed-signal microcontroller 16-bit RISC CPU embedded microcontroller semiconductor 24 KB Flash memory 1 KB SRAM 8 MHz clock 125 ns instruction cycle integrated comparator SPI UART 160-segment LCD controller low-power mode standby wake-up 80-LQFP PN package 12 x 12 mm surface-mount package industrial sensor control utility metering
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen