MSP430P325IFN - 16-Bit 8MHz Mixed-Signal MCU | TI
Teilenummer: MSP430P325IFN ✓ AktivMSP430P325IFN Übersicht
A mixed-signal microcontroller is an integrated circuit that combines digital control functions with analog input measurement. In the broader semiconductor hierarchy, the MSP430P325IFN is a microcontroller, a programmable controller, and a power management-conscious embedded processor. Its MSP430 CPU16 architecture is designed around efficient embedded control, while the integrated ADC and LCD interface reduce the need for separate analog and display-support devices.
The principal features include 16 KB of OTP program memory, 512 bytes of RAM, an 8 MHz maximum clock frequency, and a 14-bit analog-to-digital converter. The 84-segment LCD capability is especially useful for compact instruments that must present measurements without using a full graphical display. The 68-pin PLCC package exposes substantially more I/O than small dual-inline packages and accommodates the mixed-signal and LCD-oriented feature set.
The MSP430 CPU16 core uses a 16-bit RISC architecture intended for low-power embedded applications. Program storage is implemented as OTP rather than rewritable flash, making the device appropriate for designs where firmware is finalized during production. The 14-bit ADC provides a higher-resolution conversion interface than a conventional 8-bit or 10-bit converter, while the LCD segment interface reduces the processing burden associated with driving a segmented display.
Typical uses include digital multimeters, panel meters, industrial measurement instruments, portable monitors, and other LCD-based control equipment. In a meter design, the MCU can acquire analog measurements, execute control or calibration logic, and update the display while minimizing the number of supporting components. A 5 V operating version is identified for the MSP430P325IFN, which should be considered when planning system voltage compatibility.
The principal design consideration is the package and firmware architecture. The 68-pin J-lead PLCC footprint is not interchangeable with leadless packages without PCB redesign, and OTP memory cannot be updated like flash. Validate pin assignments, LCD segment mapping, ADC input configuration, clock requirements, and application firmware against the Texas Instruments MSP430P325 datasheet before production release.
This page consolidates the core MSP430P325IFN specifications, application guidance, engineering considerations, and sourcing workflow into one design reference. It also distinguishes verified device characteristics from parameters that require confirmation before schematic or firmware release.
Drop-in-Alternativen für MSP430P325IFN – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Für dieses Produkt sind keine Drop-in-Alternativen verfügbar.
Alternativen anfordernMSP430P325IFN Grenzwerte & elektrische Eigenschaften
| Product Type | 16-bit mixed-signal microcontroller |
| Manufacturer | Texas Instruments |
| Processor Architecture | MSP430 CPU16, RISC |
| Maximale Taktfrequenz | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| ADC Resolution | 14 bits |
| LCD Support | 84 segments |
| Versorgungsspannung | 5 V |
| Gehäuse | 68-pin PLCC (24.23 mm x 24.23 mm) |
| Package Code | QCCJ |
| Lead Form | J-bend |
| Terminal Count | 68 terminals |
| Montagestil | Surface mount |
| Temperature Grade | Industrial |
| Series | MSP430x3xx |
MSP430P325IFN qccj Pinbelegungsleitfaden
Pinbelegung für MSP430P325IFN (qccj-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für MSP430P325IFN.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
MSP430P325IFN ist geeignet für 6 Anwendungs: Digital Multimeter, Industrial Panel Meter, Portable Measurement Instrument, Process Monitoring Unit, LCD-Based Control Panel, Environmental Monitoring Device.
Digital Multimeter
The MSP430P325IFN fits a digital multimeter because its 14-bit ADC supports precision measurement, while the 84-segment LCD interface can drive a dedicated display without requiring a separate LCD controller. The 16-bit MSP430 CPU16 core provides enough processing capability for range selection, calibration, averaging, and unit formatting at an 8 MHz maximum clock frequency. Its 512 bytes of RAM supports short working buffers and measurement state. The 68-pin PLCC package also offers more external connectivity than small controller packages, although the OTP program memory means meter firmware should be finalized before production programming.
Empfohlen
Industrial Panel Meter
For an industrial panel meter, the MSP430P325IFN combines analog measurement and display control in a single mixed-signal device. The 14-bit ADC can acquire process or sensor signals, while the 84-segment LCD interface simplifies the display path for numerical values, status indicators, and warnings. At up to 8 MHz, the 16-bit processor can perform scaling, calibration, filtering, and threshold decisions while controlling the display. The industrial temperature grade and 5 V operating designation are relevant to equipment operating from a regulated 5 V rail, although input conditioning and protection remain system-level requirements.
Empfohlen
Portable Measurement Instrument
The MSP430P325IFN is suitable for a portable instrument where display functionality, conversion resolution, and compact embedded control matter more than rewritable firmware. Its 16 KB of OTP stores the final operating program, and 512 bytes of RAM accommodates measurement buffers, calibration constants, and display state. The 14-bit ADC supports sensors requiring more than basic binary resolution, while the 84-segment LCD interface suits a low-power glass display. Portable-product designers should account for the non-updatable OTP program memory and validate the complete battery, regulator, sensor, and display power budget.
Empfohlen
Process Monitoring Unit
A process-monitoring unit can use the MSP430P325IFN to acquire one or more analog process signals, apply calibration and filtering, and present operating information on an 84-segment LCD. The MSP430 CPU16 architecture executes the measurement and control sequence at up to 8 MHz, while the 14-bit ADC supports higher-resolution readings than an 8-bit interface. The 512 bytes of RAM is sufficient for compact working storage, and the 68-pin PLCC package provides a broad connection set for sensors, control outputs, and display lines. Production firmware should account for OTP programming and should be validated under worst-case sensor, temperature, and supply conditions.
Empfohlen
LCD-Based Control Panel
The MSP430P325IFN fits an LCD-based control panel that combines local status display with embedded logic. The 84-segment LCD interface can present operating mode, set points, alarms, and sensor readings, while the 16-bit processor executes button handling, state-machine logic, and output control. Its 14-bit ADC supports analog command or feedback inputs. The device operates at up to 8 MHz and includes 16 KB of OTP plus 512 bytes of RAM, creating a compact controller platform for fixed-function industrial equipment. Pin assignment and segment mapping must be checked carefully because LCD and multifunction pin options are specific to the MSP430P325 family.
Empfohlen
Environmental Monitoring Device
An environmental monitoring device can use the MSP430P325IFN to acquire sensor data, apply compensation and averaging, display readings locally, and report operating states through an 84-segment LCD. The 14-bit ADC supports temperature, humidity, gas, or light-sensor front ends where converter resolution affects the usable measurement span. The 16-bit MSP430 CPU16 core handles filtering and control logic at up to 8 MHz, and 512 bytes of RAM can hold recent samples and calculated values. Because program memory is OTP, the final calibration and product configuration should be programmed before shipment when field updates are not required.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für MSP430P325IFN – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt |
|---|---|
| Brand | Texas Instruments |
| Package | 68-pin PLCC (24.23 mm x 24.23 mm) |
| Processor Architecture | MSP430 CPU16, RISC |
| Maximum Clock Frequency | 8 MHz |
| Program Memory | 16 KB OTP (16K x 8) |
| RAM | 512 bytes |
| ADC Resolution | 14 bits |
| LCD Support | 84 segments |
| Supply Voltage | 5 V |
| Temperature Grade | Industrial |
Wichtigste Unterscheidungsmerkmale
- Integrated 84-segment LCD interface (vs. MSP430P325AIPM)
- Higher-resolution integrated ADC (vs. MSP430G2553)
- Deterministic one-time-programmable implementation (vs. MSP430G2553)
Designhinweise
Design the PCB around the exact 68-pin J-lead PLCC footprint associated with package code QCCJ. Confirm pad locations, lead pitch, body dimensions, and courtyard clearance from the package drawing in the Texas Instruments MSP430P325 datasheet. The PLCC package is not footprint-compatible with the 64-pin LQFP MSP430P325AIPM, so an existing board using that outline cannot accept MSP430P325IFN without mechanical and electrical redesign.
Plan the 5 V supply path and decoupling around the operating limits and recommended application circuit in the Texas Instruments MSP430P325 datasheet. Include local bulk and high-frequency bypass capacitance near the device, and ensure the regulator has adequate headroom for the selected internal operating mode. Because the 5 V value describes the device variant rather than every internal rail, confirm the permitted external supply range and regulator startup behavior against the datasheet before layout release.
Do not treat the MSP430P325IFN as a flash-memory MCU. Its 16 KB program memory is OTP, so firmware cannot be rewritten after programming. In addition, avoid assigning LCD or ADC functions until the package pin table and segment-mapping configuration have been checked. A wrong segment assumption or multifunction-pin selection can produce display conflicts even when the clock, memory, and supply settings are correct.
Keep analog inputs short, route them away from switching nodes and display-related transitions, and follow the source-impedance guidance in the Texas Instruments MSP430P325 datasheet. The 14-bit ADC's resolution does not eliminate errors caused by sensor noise, reference instability, inadequate acquisition time, or poor grounding. Validate the complete analog front end with the intended source impedance and operating sample rate rather than relying only on nominal converter resolution.
Compliance-Informationen
The industrial temperature grade is identified for MSP430P325IFN, but specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 qualification is not applicable to the industrial-grade ordering option.