NB7W-TW00B - 7in TFT WVGA HMI Touch Panel | Omron
Teilenummer: NB7W-TW00B ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $1138.68 | $1.138,68 |
| 10 | $1082 | $10.820,00 |
| 100 | $1024.8 | $102.480,00 |
| 500 | $968 | $484.000,00 |
| 1.000 | $911 | $911.000,00 |
NB7W-TW00B Übersicht
An HMI (Human Machine Interface), also called a programmable terminal, operator interface terminal, or OIT, is an industrial display and touch-input device that sits at the top of the automation hierarchy: operator presses the touchscreen, the HMI translates inputs into register writes on the PLC, and process data is rendered back as gauges, trends, alarms, and animations. HMIs are a category of industrial human-machine interface hardware alongside panel PCs and pushbutton-based operator panels.
Key features include a wide-viewing-angle 7-inch TFT panel, an extensive graphics library with animation capabilities, dual serial channels for simultaneous PLC and modem connections, and USB program download. Screen data is developed on a PC with Omron NB-Designer software and transferred over USB (Type A male to Type B male cable) or Ethernet-equipped models.
The NB7W-TW00B was specifically positioned by Omron as the best-value interface for the CP1 family of micro-PLCs, communicating over serial protocol with minimal setup. It belongs to the discontinued NB series generation; Omron officially announced NB-series discontinuation effective December 1, 2023, and recommends the NB-V1 successor models as identical replacements with no major differences.
Typical applications include small machine-builder control panels, packaging equipment, water treatment skids, and any CP1E/CP1H/CP1L PLC system needing a compact, economical touchscreen.
Design consideration: use an industrial 24 VDC supply with adequate headroom for the +/-15% input tolerance, and verify that your NB-Designer project version supports the target model before migration.
This page synthesizes distributor pricing, Omron replacement guidance, and practical migration notes not found in the manufacturer datasheet.
Drop-in-Alternativen für NB7W-TW00B – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit NB7W-TW00B (gleiche Bauform und Footprint) – abweichend in Display Type, Operating Temperature, Resolution, Supply Voltage.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
NB7W-TW00B-V1
✅ Drop-In✓ Auf Lager
$695 / Stück
Datenblatt ansehen →NB7W-TW01B-V1
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NB7W-TW01B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NB7W-TW10B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NB7W-TW11B
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NB7W-TW00B Technische Daten
| Display Type | Color TFT LCD, LED backlight |
| Screen Size | 7 inch |
| Auflösung | 800 x 480 pixels (WVGA) |
| Display Colors | 65,000 colors |
| Input Device | Resistive touchscreen |
| Versorgungsspannung | 24 VDC +/-15% |
| Power Consumption | 7 W |
| Serial Interfaces | RS-232C (x2), RS-422A/485 |
| USB Interface | Yes (program download) |
| Backlight Life | 50,000 hours (LED) |
| Enclosure Rating | IP65 (front bezel) |
| Betriebstemperatur | 0 to 50 degrees C |
| Montageart | Panel mount |
| Programming Software | Omron NB-Designer |
| Recommended PLC Family | Omron CP1 series (CP1E/CP1H/CP1L) |
| Lebenszyklusstatus | Discontinued (effective December 1, 2023); replacement NB7W-TW00B-V1 |
| RoHS-Status | unknown |
NB7W-TW00B standard Pinbelegungsleitfaden
Pinbelegung für NB7W-TW00B (standard-Gehäuse). Pin-Nummerierung, Funktionen und Anschlussdiagramme sind im Herstellerdatenblatt definiert. Entnehmen Sie diesem den genauen Footprint und Lötrichtlinien.
Keine detaillierten Pinbelegungsdaten verfügbar für NB7W-TW00B.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
NB7W-TW00B ist geeignet für 6 Anwendungs: Omron CP1 Micro-PLC Machine Control Panels, Packaging and Labeling Machinery, Water Treatment and Utility Skids, HVAC and Building Automation Interfaces, Legacy NB-Series Retrofit and Repair, Food and Beverage Equipment.
Omron CP1 Micro-PLC Machine Control Panels
The NB7W-TW00B was purpose-positioned by Omron as the best-value interface for CP1-family micro-PLCs (CP1E, CP1H, CP1L), making it the default choice for small machine-builder HMI panels. Its dual RS-232C serial ports allow one port dedicated to the PLC link and the second to a barcode reader or modem, while the 800 x 480 WVGA screen with 65,000 colors renders gauges, recipes, and alarm histories without page clutter. Typical integration uses an Omron NT-series RS-232C PLC link cable and NB-Designer graphics, with screen data downloaded over USB. The IP65 front bezel withstands washdown splashes common in packaging and assembly stations, and the 7 W power draw fits small control-cabinet 24 VDC budgets.
Empfohlen
Packaging and Labeling Machinery
Packaging machines need operator-facing screens for recipe selection, batch counters, and fault diagnostics - exactly the workload the NB7W-TW00B's graphics library and animation capabilities address. The 7-inch WVGA display provides enough area for machine-state overviews and trend graphs while fitting compact door panels, and the 50,000-hour LED backlight survives multi-shift duty cycles typical of packaging lines. Its RS-422A/485 port supports longer cable runs to controllers mounted away from the operator station, and the IP65 front rating resists dust from film and cardboard processing. Because the base model is discontinued, retrofit projects should standardize on the NB7W-TW00B-V1, which Omron confirms is dimensionally and functionally identical, allowing existing panel cutouts and NB-Designer projects to carry over unchanged.
Empfohlen
Water Treatment and Utility Skids
Skid-mounted water and wastewater equipment benefits from the NB7W-TW00B's serial-based architecture: RS-485 multidrop links connect the HMI to pumps, dosing controllers, and flow instruments over shielded twisted pair without Ethernet infrastructure in outdoor cabinets. The 65,000-color screen displays tank levels, chemical dosing rates, and alarm banners, while the resistive touchscreen works reliably with gloved hands and after exposure to humidity. Operating temperature of 0 to 50 degrees C covers mostEnclosed panel environments, though outdoor cabinets need heating or ventilation to stay within range. For new skid designs, specify the NB7W-TW00B-V1 successor to guarantee long-term supply, since Omron discontinued the original NB series effective December 1, 2023 and remaining stock is limited.
Empfohlen
HVAC and Building Automation Interfaces
Air-handling units, chillers, and pump-room control panels use the NB7W-TW00B as a local setpoint and status terminal. Its two RS-232C ports plus RS-422A/485 support communication with building controllers and field devices over serial networks that dominate legacy HVAC installations, while USB simplifies on-site program updates during commissioning. The wide-viewing-angle 7-inch TFT stays legible on wall-mounted cabinets viewed from the side, and the 800 x 480 resolution accommodates schedule tables and temperature trend plots. Engineering note: verify ambient temperature at the panel location stays within the 0 to 50 degrees C rating - rooftop or boiler-room walls can exceed this, requiring ventilation. New designs should use the NB7W-TW00B-V1 to secure the active lifecycle and current Omron documentation.
Empfohlen
Legacy NB-Series Retrofit and Repair
A large installed base of NB7W-TW00B units is reaching end of service life after years of 24/7 operation - display failures and backlight degradation are the most common symptoms. For repair, third-party replacement kits fit this model: Radwell offers a verified substitute touchglass measuring 167.5 mm x 100.5 mm (active area 160.5 mm x 97.5 mm, 54.5 mm cable with 4 pins), and Vicpas/hmirepairparts supply full touchglass-plus-housing kits covering NB7W TW00B, TW01B, TW10B, and TW11B variants. For whole-unit swap, Omron's official replacement guide confirms the NB7W-TW00B-V1 as the no-major-differences successor, making it the lowest-risk retrofit path: same cutout, same wiring, and NB-Designer project compatibility without redesign.
Empfohlen
Food and Beverage Equipment
Filling, capping, and portioning machines in food and beverage plants require operator terminals that survive washdown-adjacent environments - the NB7W-TW00B's IP65 front bezel, when properly gasketed into the panel, resists dust and low-pressure water jets from daily hose-downs of surrounding equipment. Recipes, batch counts, and clean-in-place prompts display clearly on the 65,000-color WVGA screen, and the resistive touch panel tolerates the gloves and occasional moisture typical of production-floor use. The 7 W consumption suits compact stainless control boxes powered from standard 24 VDC DIN-rail supplies within the +/-15% tolerance. Because production uptime matters, standardize spare units on the NB7W-TW00B-V1, which Omron confirms is functionally identical and actively supplied.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für NB7W-TW00B – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | NB7W-TW00B-V1 | NB7W-TW01B-V1 | NB7W-TW01B | NB7W-TW10B |
|---|---|---|---|---|---|
| Package | 7-inch panel-mount HMI bezel (IP65 front) | 7-inch panel-mount HMI bezel - same | 7-inch panel-mount HMI bezel - same | 7-inch panel-mount HMI bezel - same | 7-inch panel-mount HMI bezel - same |
| Brand | Omron | Omron | Omron | Omron | Omron |
| Display Size / Resolution | 7 inch, 800 x 480 (WVGA) | 7 inch, 800 x 480 (WVGA) | 7 inch, 800 x 480 (WVGA) | 7 inch, 800 x 480 (WVGA) | 7 inch, 800 x 480 (WVGA) |
| Supply Voltage / Power | 24 VDC +/-15%, 7 W | 24 VDC +/-15%, 7 W | 24 VDC +/-15% | 24 VDC +/-15% | 24 VDC +/-15% |
| Lifecycle Status | Discontinued (Dec 1, 2023) | Active (recommended) | Active | Discontinued | Discontinued |
Wichtigste Unterscheidungsmerkmale
- Purpose-built pairing with Omron CP1 micro-PLCs (vs. NB7W-TW01B / NB7W-TW01B-V1)
- Identical-successor migration path (vs. NB7W-TW00B-V1)
- Dual serial ports for device coexistence (vs. Single-serial competing HMIs)
Designhinweise
Power the NB7W-TW00B from a regulated 24 VDC industrial supply; the input tolerates +/-15% (20.4 V to 27.6 V) and consumes up to 7 W. Budget inrush carefully when multiple HMIs share one supply, and keep the HMI power run separate from high-current actuator loads to prevent brownout resets during inrush events. Estimated: at 7 W and 24 V, nominal current draw is about 0.29 A - size wiring and breaker curves for at least 3x inrush margin.
The most common migration mistake is assuming the discontinued NB7W-TW00B is still procurable for spares. Omron discontinued the NB series effective December 1, 2023. For any existing machine, qualify the NB7W-TW00B-V1 now using Omron's official 'Replace Guide - From NB to NB-V1' (document V468), which confirms no major differences. Also verify NB-Designer software version: Omron states the TW01B models require NB-Designer version 1.10 or higher, so update the engineering PC before downloading projects.
Although the NB7W-TW00B is a panel-mount terminal rather than a PCB component, installation quality determines IP65 validity: cut the panel to the specified 7-inch cutout, apply the supplied gasket evenly, and torque the mounting clips uniformly around the bezel. An uneven cutout or over-tightened single clip warps the bezel and breaks the front seal, voiding the dust/water-jet rating. Route serial (RS-232C/485) cables away from VFD output cables to prevent communication errors on the PLC link.
Compliance-Informationen
Compliance details were not present in the retrieved web data. Consult the official Omron NB-series datasheet and Omron's compliance portal for RoHS/REACH declarations.
