NC7SZ08L6X - Ultra-High-Speed 2-Input AND Gate | onsemi
Teilenummer: NC7SZ08L6X ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0.5603 | $0,56 |
| 10 | $0.475 | $4,75 |
| 100 | $0.34 | $34,00 |
| 500 | $0.24 | $120,00 |
| 1.000 | $0.18 | $180,00 |
NC7SZ08L6X Übersicht
A logic AND gate is a combinational digital component that produces a high output only when every input is high. This gate belongs to the hierarchy of CMOS logic gates, digital logic ICs, semiconductors, and broader digital electronics. A single two-input gate is useful when a design requires basic Boolean AND behavior in compact routing, signal conditioning, control logic, or low-power digital interfaces.
The NC7SZ08 is fabricated with advanced CMOS technology. Its specified 1.65 V to 5.5 V supply operation supports both low-voltage digital systems and conventional 3.3 V or 5 V rails. The TinyLogic UHS positioning emphasizes ultra-high-speed operation while retaining low static power dissipation. These characteristics make the device appropriate where logic transitions must be handled quickly without using a larger multi-gate package.
The verified distributor listings identify the NC7SZ08L6X as an AND gate IC with one channel, two inputs, and a 6-MicroPak package. Available source material confirms the TinyLogic UHS 2-input AND function and CMOS technology. Exact propagation-delay, output-current, input-threshold, and temperature values were not supplied in the retrieved source data and therefore are not asserted here.
Typical uses include low-voltage control logic, digital signal routing, status-flag generation, and compact embedded systems where a dedicated two-input AND function is preferable to implementing the Boolean operation in a larger programmable or multipurpose logic device. Designers should also consider whether the required logic family, supply voltage, input levels, and timing satisfy the system requirements.
For PCB layout, keep the unused input connected to a defined logic level rather than leaving it floating, and place the device close to the signals it serves. Confirm the exposed-pad or thermal-pad requirements in the manufacturer package drawing and verify the pin mapping against the applicable datasheet before releasing a layout.
This product page combines verified distributor identity, package information, pricing references, technical context, and replacement guidance. It distinguishes confirmed facts from parameters that still require direct confirmation from the manufacturer datasheet, helping engineers make sourcing and design decisions without relying on unsupported assumptions.
Drop-in-Alternativen für NC7SZ08L6X – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
NC7SZ08M5X
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NC7SZ08P6X
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
NC7SZ08L6X Grenzwerte & elektrische Eigenschaften
| Logic Type | Single two-input AND gate |
| Supply Voltage Range | 1.65 V to 5.5 V |
| Technology | Advanced CMOS |
| Product Family | TinyLogic Ultra-High Speed |
| Number of Channels | 1 channel |
| Number of Inputs | 2 inputs |
| Output Function | AND |
| Gehäuse | 6-MicroPak |
| Package Pin Count | 6 pins |
| Montageart | Surface mount |
| Shipping Configuration | Tape and reel |
| Logic Family | CMOS TinyLogic UHS |
NC7SZ08L6X Pin-Konfiguration
| Pin 1 | A — Logic input A; verify exact pin numbering against the manufacturer datasheet |
| Pin 2 | B — Logic input B; verify exact pin numbering against the manufacturer datasheet |
| Pin 3 | GND — Ground reference |
| Pin 4 | Y — Logic output |
| Pin 5 | VCC — Positive supply input |
| Pin 6 | NC — Not connected or package-dependent; verify against the manufacturer datasheet |
Typische Anwendungen
NC7SZ08L6X ist geeignet für 6 Anwendungs: Low-Voltage Digital Control Logic, Status-Flag Qualification, Portable Device Signal Routing, Data-Control Interlock, Sensor and Alarm Logic, High-Speed Digital Interconnect.
Low-Voltage Digital Control Logic
The NC7SZ08L6X is suitable for combining two control or status signals in compact low-voltage digital logic. Its single two-input AND function produces a high output only when both conditions are true, making it useful for enable gating, alarm qualification, and permission logic. The 1.65 V to 5.5 V supply range supports systems built around low-voltage CMOS rails. The tiny 6-MicroPak footprint helps reduce board area, while the TinyLogic UHS positioning is useful where logic transitions must be handled promptly. Designers should verify input thresholds, propagation delay, output drive, and timing margins against the connected controller or peripheral.
Empfohlen
Status-Flag Qualification
Use the NC7SZ08L6X to qualify two independent status flags before presenting a combined signal to a downstream logic block. For example, an AND gate can assert an interrupt only when a sensor-valid signal and an enable signal are both active. The 1.65 V to 5.5 V operating range accommodates many portable and embedded supply rails. Because this is a CMOS logic gate, unused inputs should be tied to a defined level rather than left floating. The compact 6-MicroPak package supports space-constrained boards, and the UHS family can help minimize propagation delay when the qualified status must reach a counter or interrupt controller promptly.
Empfohlen
Portable Device Signal Routing
The NC7SZ08L6X can provide a compact AND-function element in portable and battery-operated equipment where board space and static power are important. Its 1.65 V to 5.5 V supply range allows operation across several low-voltage rail conditions, while the TinyLogic UHS designation targets fast logic with low static dissipation. A designer can place it near the source of two digital signals to prevent long routing across the board. Actual battery-life impact must be calculated from the device quiescent current, dynamic switching current, load capacitance, and activity rate; these values were not supplied in the verified snippets and should be taken from the manufacturer datasheet.
Empfohlen
Data-Control Interlock
The NC7SZ08L6X can implement an interlock between a data-path enable and a sequencing-control signal. The output becomes active only when both inputs satisfy the required Boolean condition, preventing downstream registers or peripheral controls from being asserted during an invalid state. This is useful in small control blocks, sensor interfaces, and test equipment where a dedicated logic gate is simpler than configuring a larger FPGA or microcontroller pin. The CMOS implementation supports low-voltage operation, but timing and output-load behavior must be verified at the selected supply voltage. Board layout should minimize trace length and provide a defined state for any unused input.
Empfohlen
Sensor and Alarm Logic
Use the NC7SZ08L6X to combine sensor-valid or threshold-qualified signals with an alarm-enable input. This produces a single conditioned output for an LED, interrupt line, or downstream controller input. The low-voltage CMOS supply range is compatible with many embedded sensing systems, and the compact package helps place the logic close to the sensor interface rather than at a distant controller. The design must confirm that the gate's input thresholds match the sensor interface voltage and that its output can drive the next stage. If the alarm path is safety-related, review propagation delay, supply tolerance, and fail-safe behavior in the complete system design.
Empfohlen
High-Speed Digital Interconnect
The NC7SZ08L6X is appropriate for short, timing-sensitive digital interconnect paths that need Boolean logic without allocating a larger multi-channel package. Its TinyLogic Ultra-High Speed family classification emphasizes fast propagation and high output drive, while the 1.65 V to 5.5 V range supports common low-voltage digital environments. Place the gate near the driven receiver and keep the input and output traces short to reduce parasitic capacitance and ringing. The manufacturer datasheet should be used to obtain the actual propagation-delay curves, output-drive capability, and input/output voltage limits at the selected supply voltage before treating the part as a guaranteed high-speed replacement.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für NC7SZ08L6X – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | NC7SZ08M5X | NC7SZ08P6X |
|---|---|---|---|
| Logic Function | Single two-input AND gate | Related two-input AND-gate variant | Two-input AND-gate alternative |
| Product Family | TinyLogic Ultra-High Speed | Related TinyLogic UHS variant | TinyLogic-related onsemi logic |
| Package | 6-MicroPak | 6-MicroPak per cross-reference comparison context | SC-70-6 per retrieved alternative description |
| Number of Inputs | 2 | 2 | 2 |
| Brand | onsemi | onsemi | onsemi |
Wichtigste Unterscheidungsmerkmale
- Dedicated single-gate footprint (vs. NC7SZ08P6X)
- Documented low-voltage CMOS operation (vs. NC7SZ08M5X)
- Ultra-High Speed family positioning (vs. NC7SZ08P6X)
Designhinweise
Place the NC7SZ08L6X close to the two signal sources and the receiving logic to minimize trace capacitance and propagation-delay variation. Keep the ground connection short and use the package-specific land pattern from the onsemi datasheet. Because the exact pin numbering and exposed-pad requirements were not included in the retrieved source text, verify them before routing or releasing a Gerber file.
Do not leave unused CMOS inputs floating. Tie every unused input to a defined logic level that remains valid at the selected supply voltage. Also verify the input thresholds and output levels against the connected device, especially when mixing families or operating near the lower 1.65 V limit of the documented supply range.
Use short, properly referenced traces for high-speed or lightly loaded signals. Although the device is associated with the TinyLogic UHS family, the actual timing margin depends on supply voltage, load capacitance, input slew rate, and the receiving device. Obtain propagation-delay and output-drive curves from the current manufacturer datasheet rather than relying on the family description alone.
Compliance-Informationen
The retrieved product snippets identify onsemi and Fairchild Semiconductor history but do not provide verified RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statements. Confirm current compliance documentation with onsemi.
