PCM1704U/2K - 24-Bit 96kHz Stereo DAC | Texas Instruments
Teilenummer: PCM1704U/2K ✗ AbgekündigtPCM1704U/2K Übersicht
A digital-to-analog converter, or DAC, converts digital audio samples into continuous analog voltage signals. Within the broader signal-chain hierarchy, a DAC sits after the digital source and before the analog output amplifier, reconstruction filter, and speaker or headphone stage. The PCM1704U/2K is therefore a precision audio interface component that translates 24-bit digital words into separate positive and negative analog waveforms for two stereo channels.
The principal features are 24-bit resolution, operation up to a 96 kHz sampling rate, two-channel sign-magnitude output, and dual ±5 V analog power. A BiCMOS process combines bipolar analog circuitry with CMOS control logic. The sign-magnitude output format provides separate positive and negative outputs around a bipolar reference system, allowing the downstream reconstruction network to preserve the sign of each digital sample.
The PCM1704U/2K belongs to Texas Instruments' SoundPlus family of audio data converters. Its architecture is intended for CD-player, DVD-player, digital-audio, and other equipment requiring a serial digital input and high-resolution stereo conversion. Because the converter performs quantization directly into analog currents or voltages, support circuitry includes a clock source, digital-interface routing, output reconstruction filtering, and a stable low-noise reference arrangement.
Typical applications include high-fidelity stereo DAC systems, CD and DVD audio equipment, digital mixing consoles, USB and network-audio player analog output stages, and premium consumer audio products. The 96 kHz maximum rate supports high-resolution source material, while the 24-bit word length is appropriate for preserving low-level signal detail through the digital portion of the audio chain.
Layout is critical because the analog outputs and digital inputs meet on a small 20-pin SOIC. Keep digital clock and data traces away from the output pins, provide a low-impedance ground return, and use symmetric decoupling close to the supply pins. Follow the manufacturer datasheet for the output load, reference, filter, and power-supply requirements rather than treating the DAC as a general-purpose converter.
This page combines the verified PCM1704U/2K package and conversion specifications with comparison guidance, sourcing information, and practical application notes. It also distinguishes true pin-compatible options from newer PCM179x products that may require a different interface, package, or output architecture.
Drop-in-Alternativen für PCM1704U/2K – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PCM1704U/2K (gleiche Bauform und Footprint) – abweichend in Package, Converter Type, Resolution, Number of Channels, Operating Temperature.
PCM1704U-K/2K
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PCM1704U-J/2K
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PCM1704U-J
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PCM1704U-K
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PCM1704U
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PCM1704U/2K Grenzwerte & elektrische Eigenschaften
| Converter Type | 24-bit stereo audio digital-to-analog converter |
| Auflösung | 24 bit |
| Maximum Sampling Rate | 96 kHz |
| Number of Channels | 2 channels |
| Process Technology | BiCMOS |
| Output Architecture | Sign-magnitude |
| Digital Interface | Serial |
| Analog Supply Voltage | ±5 V |
| Gehäuse | 20-SOIC |
| Package Body Width | 5.30 mm |
| Package Width Description | 0.209 inch |
| Pin-Anzahl | 20 pins |
| Montageart | Surface mount |
PCM1704U/2K 0.209 inch Pinbelegungsleitfaden
Pinbelegung für PCM1704U/2K (0.209 inch-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für PCM1704U/2K.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PCM1704U/2K ist geeignet für 6 Anwendungs: High-Fidelity Stereo DAC, CD and DVD Audio Equipment, Digital Audio Player, Professional Audio Mixing System, Network and USB Audio Player, Premium Consumer Audio Product.
High-Fidelity Stereo DAC
The PCM1704U/2K fits a high-fidelity stereo DAC because it converts two channels of 24-bit digital audio at rates up to 96 kHz. Its sign-magnitude outputs feed the reconstruction stage directly, while the dual ±5 V analog supply supports the bipolar signal path used by many legacy audio architectures. The design must include the manufacturer-recommended output filter, clock routing, bypass capacitors, and reference arrangement. The principal benefit is a straightforward upgrade path for equipment already built around the 20-SOIC footprint. Its trade-off is the obsolete lifecycle status and the limited availability of newer functions compared with current PCM179x-family converters.
Empfohlen
CD and DVD Audio Equipment
PCM1704U/2K is appropriate for CD and DVD audio equipment requiring a 24-bit, 96 kHz-capable stereo conversion stage. Its serial interface accommodates digital audio data from a transport or decoder, and the two sign-magnitude outputs provide left- and right-channel analog signals for the reconstruction and output-amplifier stages. A 20-SOIC package allows direct use of many mature digital-audio board layouts. Designers should verify the required master-clock relationship, digital input format, and output-load assumptions in the manufacturer datasheet. The legacy bipolar output architecture simplifies compatibility with existing analog boards but is less flexible than newer multi-format DAC platforms.
Empfohlen
Digital Audio Player
A digital audio player can use the PCM1704U/2K to convert decoded PCM samples into balanced-quality stereo analog signals. Its 24-bit word length and 96 kHz maximum rate support high-resolution playback, while the serial data interface keeps the digital connection compact. The converter should be positioned before a passive or active reconstruction filter and a low-noise headphone or line amplifier. Correct clock routing and short analog traces are necessary to prevent data-dependent jitter or noise from entering the output path. The device is most attractive when maintaining an existing 20-SOIC audio board; new compact products may benefit more from a smaller, newer DAC.
Empfohlen
Professional Audio Mixing System
The PCM1704U/2K can serve as a stereo digital-to-analog output stage in a professional mixing or monitoring system that already uses a compatible serial interface and bipolar analog topology. Its two-channel 24-bit conversion supports full-scale digital mixing, while the sign-magnitude outputs can feed balanced output circuitry when combined with the appropriate converter network. Designers must pay particular attention to grounding, clock isolation, and the reconstruction-filter response. Because the device is obsolete, critical production equipment may prefer stocked legacy units with documented provenance rather than a newly qualified cross-brand substitute. New installations should evaluate current converters with documented longevity programs.
Empfohlen
Network and USB Audio Player
PCM1704U/2K is usable in a network or USB audio player when the host streams decoded PCM data at a supported format and rate. The serial interface carries digital audio into the converter, after which the sign-magnitude outputs enter the analog reconstruction and line-output stages. For this application, the board must maintain a clean, low-jitter clock and carefully isolate the converter from high-speed USB or network circuitry. Its 96 kHz ceiling covers common high-resolution source rates, while 24-bit words provide adequate dynamic range for many consumer applications. The older 20-SOIC footprint and obsolete status make it more suitable for repair and legacy-platform reuse than for a new space-constrained product.
Empfohlen
Premium Consumer Audio Product
The PCM1704U/2K can support a premium consumer audio product built around the established 20-SOIC stereo DAC footprint. Its 24-bit resolution and 96 kHz sampling capability allow it to convert high-resolution source data into clean left- and right-channel analog outputs. The design must provide stable dual ±5 V analog power, a correctly implemented digital interface, and an output network selected for the intended impedance and frequency response. Keeping digital clock and data traces away from analog outputs reduces coupling into sensitive listening levels. For a newly launched product, the obsolete lifecycle status creates supply continuity risk, so the converter is best considered where it enables reuse of a proven board and analog architecture.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PCM1704U/2K – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PCM1704U-K/2K | PCM1704U-J/2K | PCM1704U-J | PCM1704U-K | PCM1704U |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-SOIC, 5.30 mm width | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Resolution | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit | 24 bit |
| Maximum Sampling Rate | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz | 96 kHz |
| Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
Wichtigste Unterscheidungsmerkmale
- Exact 24-bit and 96 kHz headline specification alignment across the listed PCM1704 family options (vs. PCM1704U-K/2K)
- Direct board-retention option for existing sign-magnitude audio designs (vs. PCM1792)
- Two-channel conversion in a mature 20-SOIC footprint (vs. PCM1704U)
- BiCMOS sign-magnitude conversion architecture established for stereo audio (vs. PCM1704U-J)
Designhinweise
Separate the digital and analog signal paths on the PCB. Keep serial clock, serial data, and control traces away from the sign-magnitude output pins and analog supply pins. Route analog output traces as short as practical, use a continuous ground plane where appropriate, and place the required bypass capacitors close to the converter pins. The exact pin assignments and ground configuration must be taken from the manufacturer pin-description table.
Implement clean dual ±5 V analog supplies and verify the digital supply requirement against the manufacturer datasheet. Decouple each supply close to its associated package pin with the capacitance and ESR characteristics recommended by the manufacturer. Because the converter uses a bipolar analog output stage, supply asymmetry and ripple can affect signal offset and distortion. Confirm power-up sequencing, output muting behavior, and analog output loading before finalizing the rail architecture.
Treat the serial clock as a high-speed signal even though the maximum sampling rate is only 96 kHz. Match clock and data routing to the source-device specifications, minimize stub length, and keep switching current away from the analog output network. Pay particular attention to master-clock jitter and the relationship among the system clock, sample rate, and converter interface. Do not change the interface timing without rechecking the manufacturer timing tables.
Do not treat PCM1792 or PCM1795 as automatic PCB replacements. Texas Instruments support information states that no pin-to-pin-compatible alternatives were identified for PCM1704U, and newer PCM179x products can require a different interface, supply arrangement, output topology, and reconstruction network. Before substituting any part, compare every pin, clock requirement, output-load condition, and analog-bias voltage rather than relying only on resolution and sample-rate figures.
The PCM1704U/2K is an obsolete product, so authenticate any legacy stock and request date-code, traceability, and test information before using it in safety- or revenue-critical equipment. For a new design, validate long-term availability and lifecycle support for the selected replacement rather than assuming that a stocked legacy unit will remain procurable. Quotation requests should identify the exact suffix and reel or tube ordering option required by the assembly process.
Compliance-Informationen
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was found in the manufacturer or distributor records reviewed for this obsolete device.