Texas Instruments

PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

Teilenummer: PCM1795DBR ✓ Aktiv
5 V for VCC1, VCC2L, and VCC2R Vdss 28-pin SSOP Package 256 fS Speed
MOQ: 1 |

PCM1795DBR Übersicht

Texas Instruments PCM1795DBR is a 32-bit, 192 kHz sampling stereo audio digital-to-analog converter with two balanced current outputs, housed in a 28-pin SSOP package. It uses advanced segment DAC architecture, supports DSD playback up to 200 kHz, and operates from a 5 V analog supply with a 3.3 V digital supply.

A stereo audio DAC converts digital PCM, I2C, SPI, or TDMCA audio data into left- and right-channel analog signals. Within the signal-chain hierarchy, the PCM1795 belongs to the DAC family of audio converters, which supports playback from digital sources, home-theater equipment, professional audio hardware, and network-audio systems. Its dual-channel architecture provides separate analog outputs for balanced stereo audio paths.

The converter resolves 32-bit input data and supports sampling rates through 192 kHz. Its advanced segment architecture is designed for high dynamic performance and improved tolerance to clock jitter. Manufacturer test conditions specify 5 V for VCC1, VCC2L, and VCC2R, 3.3 V for VDD, a 48 kHz sampling rate, a 256 fS system clock, and 32-bit data.

The PCM1795DBR provides two balanced current outputs, allowing the analog signal path to be optimized for the selected output implementation. Its stated dynamic-performance value includes 123 dB typical signal-to-noise ratio and 123 dB typical common-mode rejection. These characteristics make the device suitable for precision digital-to-analog conversion where channel separation and low-level noise are important.

Typical uses include high-resolution stereo audio playback, CD and network-player output stages, USB-audio interfaces, and professional audio equipment. A designer can also use the converter in DSD-capable equipment because the manufacturer lists support for DSD playback at up to 200 kHz. Balanced outputs simplify matching between the converter and downstream differential analog stages.

The principal design task is implementing a low-noise analog output network around the current outputs. Supply routing, output-stage components, clocking, grounding, and digital-interface isolation should follow the manufacturer datasheet. Because the converter contains analog and digital domains, separating noisy digital return paths from sensitive output references is as important as selecting suitable supply bypassing components.

This product page combines the manufacturer's architecture description with package, interface, supply, and performance details, then organizes replacement guidance and practical design considerations for engineers evaluating the PCM1795DBR.

Drop-in-Alternativen für PCM1795DBR – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit PCM1795DBR (gleiche Bauform und Footprint) – abweichend in Maximum Sampling Rate, Package, Product Type, DAC Architecture, Converter Architecture.

AKM (Asahi Kasei Microdevices)
Maximum Sampling Rate: 108 kHz
Converter Architecture: Advanced multi-bit delta-sigma modulator
Vergleichen mit PCM1795DBR →
Texas Instruments
Maximum Sampling Rate: 192kHz
Product Type: Stereo audio digital-to-analog converter
Converter Architecture: Multi-level delta-sigma
Vergleichen mit PCM1795DBR →
Texas Instruments
Maximum Sampling Rate: 192 kHz
Package: 28-pin SSOP (DB), 5.30 mm width
Vergleichen mit PCM1795DBR →
Texas Instruments
Maximum Sampling Rate: 192kHz
Package: 28-lead SSOP
Product Type: Stereo digital-to-analog converter
Vergleichen mit PCM1795DBR →
Texas Instruments
Maximum Sampling Rate: 192 kHz
Package: 28-lead SSOP (DBR), 208 mil
DAC Architecture: Advanced segment DAC
Vergleichen mit PCM1795DBR →

PCM1796DBR

✅ Drop-In
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter (DAC) · 24 bit · 192 kHz · Up to 200 kHz DSD · 2 (stereo) · Advanced segment DAC · Balanced current output (differential) · Serial 3-wire (LRCK, BCK, DATA)

Preis auf Anfrage

Datenblatt ansehen →

PCM1798DB

✅ Drop-In
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter · Advanced segment DAC · 24 bit · 200 kHz · 192 kHz · 123 dB · 0.0005% · Differential current output

Preis auf Anfrage

Datenblatt ansehen →

PCM1792ADB

✅ Drop-In
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter · Advanced-segment DAC · 24 bit · 192 kHz · 200 kHz DSD · 2 channels · 132 dB · 129 dB

Preis auf Anfrage

Datenblatt ansehen →

PCM1791ADB

✅ Drop-In
📦 SSOP-28
Pin-compatible stereo DAC family member with 24-bit-class resolution versus 32-bit for PCM1795DBR

📋 Referenzalternative (nicht im Katalog)

PCM1796DBR

✅ Drop-In
Texas Instruments
📦 SSOP-28
Stereo audio digital-to-analog converter (DAC) · 24 bit · 192 kHz · Up to 200 kHz DSD · 2 (stereo) · Advanced segment DAC · Balanced current output (differential) · Serial 3-wire (LRCK, BCK, DATA)

Preis auf Anfrage

Datenblatt ansehen →

PCM1795DBR Grenzwerte & elektrische Eigenschaften

Product Type Stereo audio digital-to-analog converter (DAC)
DAC Resolution 32 bit
Number of DAC Channels 2 channels
Maximum Sampling Rate 200 kHz
Nominal PCM Sampling Rate 192 kHz
DSD Playback Support Up to 200 kHz
DAC Architecture Advanced segment
Analog Outputs 2 balanced current outputs
Digital Control Interfaces I2C, SPI, and TDMCA
Typical Signal-to-Noise Ratio 123 dB
Typical Common-Mode Rejection 123 dB
Analog Supply Voltage 5 V for VCC1, VCC2L, and VCC2R
Digital Supply Voltage 3.3 V for VDD
Manufacturer Test Sampling Rate 48 kHz
Manufacturer Test System Clock 256 fS
Manufacturer Test Data Width 32 bit
Gehäuse 28-pin SSOP
Device Technology CMOS monolithic integrated circuit
Montageart Surface mount

PCM1795DBR 28-pin ssop Pinbelegungsleitfaden

Pinbelegung für PCM1795DBR (28-pin ssop-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für PCM1795DBR im 28-pin ssop-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für PCM1795DBR.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

PCM1795DBR ist geeignet für 6 Anwendungs: High-Resolution Network Audio Player, USB Audio Interface, Professional Stereo Audio Converter, CD and Network Player Output Stage, Digital Audio Mixing Console, DSD-Capable Stereo Equipment.

🌐

High-Resolution Network Audio Player

PCM1795DBR fits the stereo output stage of a high-resolution network player that accepts 32-bit digital audio and needs a clean conversion path at up to 192 kHz. Its two balanced current outputs support a symmetrical analog topology, while the listed 123 dB typical SNR provides a favorable noise floor for low-level listening levels. The converter can also serve DSD-capable playback because the device supports DSD operation up to 200 kHz. In implementation, the digital transport should deliver compatible PCM or TDMCA data while separate analog and digital supply paths preserve performance.

🖥️

USB Audio Interface

The PCM1795DBR can provide the stereo analog conversion stage in a USB audio interface when the USB controller supports 32-bit audio and the required clocking. Its I2C, SPI, and TDMCA control options allow integration with digital audio transport controllers, while its 192 kHz sampling capability supports high-rate playback. The two balanced current outputs connect naturally to an analog output network, but interface designers must account for the converter's specified 5 V analog and 3.3 V digital supplies and keep USB and digital return currents away from sensitive analog nodes.

🎛️

Professional Stereo Audio Converter

PCM1795DBR is appropriate for professional stereo monitoring and digital mixing equipment that benefits from 32-bit conversion and balanced analog outputs. The 123 dB typical common-mode rejection supports channel separation in balanced circuitry, while the two-channel architecture maps directly to standard left-right monitoring paths. Designers should pay particular attention to the external current-to-voltage network, output scaling, reference grounding, and clock-jitter performance. The SSOP-28 package allows the converter to sit close to its analog output components and away from switching regulators.

🎧

CD and Network Player Output Stage

In a CD, streamer, or network-player output stage, PCM1795DBR can convert digital source data into high-quality stereo current outputs before the analog amplification and volume-control stages. Its 32-bit resolution preserves high-resolution source information, and its balanced outputs can simplify differential routing to the next stage. For a conventional PCM-only product, the pin-compatible PCM1796DBR may be considered when full 32-bit operation is unnecessary. For products advertising DSD support, PCM1795DBR retains the explicitly listed 200 kHz DSD capability.

🏭

Digital Audio Mixing Console

PCM1795DBR can serve as a stereo conversion component in a digital audio console that requires balanced outputs and high-resolution playback monitoring. Its two balanced current outputs support a conventional differential output stage, while the stated 123 dB typical SNR and common-mode rejection help preserve channel integrity. Clocking is a central design consideration because system-clock mode and jitter influence conversion performance. Place the device according to the manufacturer layout guidance and isolate digital interfaces from the sensitive output-reference network.

💿

DSD-Capable Stereo Equipment

PCM1795DBR is especially relevant to DSD-capable stereo equipment because the manufacturer listing identifies DSD playback up to 200 kHz. Combined with 32-bit PCM operation, this allows one stereo converter to address both high-resolution PCM and DSD source formats. The design must provide suitable digital data routing, clock signals, and analog reconstruction circuitry consistent with the manufacturer datasheet. Using a lower-resolution same-family converter would remove the full 32-bit and DSD-specific benefits, so PCM1795DBR is the appropriate selection for this feature set.

What are the key specifications of PCM1795DBR that engineers should know?
The PCM1795DBR is a 32-bit stereo audio DAC with a 192 kHz nominal sampling rate, support for DSD playback up to 200 kHz, and two balanced current outputs. According to the Texas Instruments manufacturer datasheet, the device is a monolithic CMOS IC in a 28-pin SSOP package. Manufacturer electrical-characterization conditions use 5 V analog supplies, 3.3 V VDD, 48 kHz sampling, a 256 fS system clock, and 32-bit data. Its stated typical SNR and CMRR are both 123 dB.
What is the operating voltage of PCM1795DBR?
The PCM1795DBR uses 5 V for the VCC1, VCC2L, and VCC2R analog supply pins and 3.3 V for the VDD digital supply. According to the Texas Instruments manufacturer datasheet, these voltages are the conditions used for the specified electrical characteristics at 25°C, with 48 kHz sampling and a 256 fS system clock. The converter should therefore be designed with separate analog and digital supply routing rather than assuming one common supply rail.
What is PCM1795DBR and what does it do?
PCM1795DBR is a two-channel, advanced-segment digital-to-analog converter for stereo audio signals. According to the Texas Instruments manufacturer product page, it accepts digital audio data and provides balanced current outputs, allowing the analog output implementation to be optimized by the designer. The device supports 32-bit PCM data, a 192 kHz sampling rate, and DSD playback up to 200 kHz, making it suitable for high-resolution consumer and professional audio equipment.
Where can I download the PCM1795DBR datasheet PDF?
The official PCM1795DBR datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/pcm1795.pdf. The manufacturer document identifies the converter as a 32-bit, 192 kHz sampling advanced-segment stereo audio DAC and includes its electrical characteristics, application information, pin descriptions, and recommended implementation details. Use this document for the authoritative SSOP-28 pin assignments, recommended external circuitry, and operating limits.
Where can I find the PCM1795DBR pinout?
The PCM1795DBR pinout is shown in the pin-configuration section of the official Texas Instruments PCM1795 datasheet at https://www.ti.com/lit/ds/symlink/pcm1795.pdf. The component is packaged as a 28-pin SSOP. Use the manufacturer pin-description table when assigning supply pins, digital interfaces, clock signals, analog outputs, and ground connections. The package drawing also establishes the exposed thermal and layout geometry used for the SSOP-28 footprint.
Is PCM1795DBR suitable for high-resolution audio equipment?
Yes, PCM1795DBR is suitable for high-resolution stereo audio equipment because it processes 32-bit data and supports a 192 kHz sampling rate. According to the Texas Instruments manufacturer datasheet, the advanced-segment architecture is intended to provide excellent dynamic performance and improved clock-jitter tolerance. Its 123 dB typical SNR and balanced current outputs also support low-noise, channel-separated analog designs in USB-audio, network-player, and professional audio products.
PCM1795DBR vs PCM1796DBR: which is better for a 32-bit audio design?
PCM1795DBR is the better choice when the design specifically requires 32-bit conversion, because PCM1796DBR is identified in comparison information as a lower-resolution alternative while sharing the same pin arrangement. The published comparison describes PCM1796DBR as pin-by-pin compatible with PCM1795, allowing an existing layout to be retained. PCM1795DBR additionally supports DSD playback up to 200 kHz, making it more appropriate when both high-resolution PCM and DSD capability are required.
What is the difference between PCM1795DBR and PCM1798DB?
The principal difference is conversion resolution: PCM1795DBR supports 32-bit data, while the comparison listing identifies PCM1798DB as a lower-resolution device. Both are stereo DACs targeting 192 kHz-class audio, so a direct substitution depends on whether the receiving circuit can tolerate reduced bit depth and whether every peripheral function is electrically identical. PCM1795DBR additionally supports DSD playback up to 200 kHz, providing a clear functional reason to retain it in DSD-capable designs.
When should I choose PCM1795DBR over PCM1796DBR?
Choose PCM1795DBR over PCM1796DBR when the source data uses the converter's full 32-bit resolution or when DSD playback up to 200 kHz is required. Published compatibility information identifies PCM1796DBR as pin-by-pin compatible, making it a practical option for conventional lower-resolution PCM designs. PCM1795DBR remains preferable for advanced high-resolution players because it preserves 32-bit processing capability and adds the listed DSD playback function.
Is PCM1795DBR suitable for a USB audio interface?
PCM1795DBR can be used in a USB audio interface when the downstream digital transport can deliver compatible PCM, I2C, SPI, or TDMCA data. Its 32-bit resolution, 192 kHz sampling capability, and two balanced current outputs suit a stereo conversion stage. The interface design must still provide the required 5 V analog and 3.3 V digital supplies, provide clean clocking, and implement the current-output analog network specified by the manufacturer datasheet.
What is the best drop-in replacement for PCM1795DBR?
PCM1796DBR is the best-supported drop-in candidate for PCM1795DBR because compatibility information explicitly describes the two devices as having the same pin configuration and being pin-by-pin compatible. The replacement remains appropriate for designs that do not depend on the PCM1795's 32-bit or DSD-specific functionality. For DSD-capable or full-resolution designs, retaining PCM1795DBR is safer because the alternative's lower bit depth can change the intended conversion capability.
Can PCM1796DBR replace PCM1795DBR without changing the PCB?
Yes, PCM1796DBR can replace PCM1795DBR without changing the PCB when the replacement's lower conversion resolution is acceptable. The published comparison identifies the same pin configuration and states that the devices are pin-by-pin compatible. Verify the power-up sequence, digital control mode, and external analog network in the manufacturer documentation, and avoid using this substitution when 32-bit conversion or DSD playback up to 200 kHz is functionally required.
What is the best Texas Instruments equivalent for PCM1795DBR?
PCM1796DBR is the most directly documented Texas Instruments equivalent because its comparison listing states that it has the same pin configuration and is pin-by-pin compatible. It is suitable when reduced conversion resolution does not affect the product requirements. For applications requiring PCM1795DBR's full 32-bit operation or DSD playback up to 200 kHz, there is no functionally equivalent lower-resolution substitute in this selection, so the original converter should be retained.
Where can I buy PCM1795DBR online and what is the lead time?
PCM1795DBR can be requested through the Request a Quote form on this page, where the current commercial terms, stock position, minimum order quantity, and lead time should be confirmed for the exact 28-pin SSOP tape-and-reel ordering code. The manufacturer product page identifies PCM1795DBR as an orderable part, but current supply conditions can change. Use the quote form rather than relying on a historical listing for an executable delivery commitment.
What is the price and stock status of PCM1795DBR?
The current commercial terms and stock status for PCM1795DBR should be confirmed through the Request a Quote form on this page. The component is identified by Texas Instruments as a 32-bit, 192 kHz advanced-segment stereo DAC, and the ordering code PCM1795DBR denotes the 28-pin SSOP tape-and-reel configuration. A quote request allows the exact package suffix, production quantity, delivery location, and target lead time to be evaluated together.

Technische Referenzdaten für PCM1795DBR – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose PCM1795DBR when the product must preserve 32-bit audio resolution, support DSD playback up to 200 kHz, or provide two balanced stereo current outputs in an SSOP-28 package. It is the stronger choice for high-resolution network players, USB-audio interfaces, professional monitoring equipment, and DSD-capable stereo products. PCM1796DBR is appropriate when its pin-by-pin compatibility is useful and reduced conversion resolution is acceptable. PCM1798DB or PCM1792ADB may suit conventional stereo PCM designs, but they do not retain the PCM1795's full 32-bit and listed 200 kHz DSD feature set. Before replacing the PCM1795DBR, verify the digital control mode, clock arrangement, supply connections, and current-output network in the manufacturer documentation.

Vergleich mit Alternativen

Parameter Dieses Produkt PCM1796DBR PCM1798DB PCM1792ADB PCM1791ADB
Package SSOP-28 SSOP-28 SSOP-28 SSOP-28 SSOP-28
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Conversion Resolution 32 bit 24-bit class 24-bit class 24-bit class 24-bit class
DAC Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Nominal Sampling Rate 192 kHz 192 kHz 192 kHz 192 kHz 192 kHz

Wichtigste Unterscheidungsmerkmale

  • Retains full 32-bit conversion resolution (vs. PCM1796DBR)
  • Supports DSD playback at 200 kHz (vs. PCM1792ADB)
  • Provides both stereo channels in one 28-pin SSOP (vs. PCM1798DB)
  • Supports I2C, SPI, and TDMCA control (vs. PCM1791ADB)

Designhinweise

Place the PCM1795DBR close to its external output-network and decoupling components so that sensitive analog signals do not travel long distances across the PCB. Keep digital interface and clock routing away from the current-output components. Use a continuous ground-plane strategy and connect the analog and digital grounding at the location recommended by the manufacturer layout, because long parallel return paths can couple switching or interface noise into the audio output.

Provide the specified 5 V analog supply and 3.3 V digital supply with local high-frequency decoupling at the appropriate supply pins. Route analog and digital supply branches separately so that current from digital interface drivers does not flow through the analog output reference. Check the converter's operating and absolute-maximum limits in the manufacturer datasheet before adding any overshoot or startup features.

Treat clock quality as part of the audio signal chain. The manufacturer identifies advanced-segment architecture as improving tolerance to clock jitter, but this does not remove the need for clean clock routing. Use the recommended system-clock configuration, minimize stubs and unnecessary loading, and avoid routing clock signals beneath or between sensitive current-output components. A stable digital interface also prevents data transitions from disturbing the analog output reference.

Do not treat a pin-compatible lower-resolution converter as a feature-equivalent replacement. PCM1795DBR provides 32-bit conversion and DSD playback up to 200 kHz, while the compared alternatives are lower-resolution devices. Before substituting PCM1796DBR or another family member, confirm that reduced bit depth is acceptable, that all digital control modes remain compatible, and that the external current-output network is unchanged.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the manufacturer or distributor information.

Ähnliche Suchanfragen

PCM1795DBR datasheet PCM1795DBR datasheet pdf PCM1795DBR pinout PCM1795DBR SSOP-28 PCM1795DBR 32-bit DAC PCM1795DBR 192kHz PCM1795DBR balanced current output PCM1795DBR DSD 200kHz PCM1795DBR replacement PCM1795DBR vs PCM1796DBR PCM1795DBR equivalent PCM1795DBR price PCM1795DBR stock Texas Instruments PCM1795DBR PCM1795DBR audio interface circuit

Verwandte Bauteile & Begriffe

Texas Instruments PCM1795DBR PCM1796DBR PCM1798DB PCM1792ADB PCM1791ADB digital-to-analog converter DAC stereo DAC advanced segment DAC PCM audio DSD balanced current output 32-bit conversion 192 kHz sampling 200 kHz DSD I2C SPI TDMCA SSOP-28 surface-mount package audio converter clock jitter signal-to-noise ratio common-mode rejection
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen