PDS-408G/AC-US - 8-Port PoE BT Switch 480W | Microchip
Teilenummer: PDS-408G/AC-US ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
PDS-408G/AC-US Übersicht
A digital ceiling PoE switch is a network switch with an integrated Power-over-Ethernet power sourcing capability, placed within the power management hierarchy above PoE controllers (such as Microchip PD69xxx PSE ICs) and below network management systems. It delivers both data and DC power over standard Ethernet cabling to powered devices (PDs) such as LED luminaires, sensors, and wireless access points.
Key features include automatic PoE power allocation based on the detected PD device class per IEEE 802.3bt, a 480W fan-less power design for silent ceiling deployment, 8 PoE output ports plus 3 additional uplink/service ports (11 ports total), and managed operation with remote management, VLAN support, and link aggregation as described in the product documentation.
Architecturally, the PDS-408G integrates an Ethernet switching fabric with PoE power sourcing equipment (PSE) circuitry and an AC-DC power stage sized for 480W continuous output. Per-port power is negotiated with each PD according to its class, up to the 90W BT ceiling, allowing mixed loads of lighting, cameras, and access points on a single switch.
Typical applications include PoE LED lighting for digital ceiling systems, building automation sensor networks, IP security cameras, and wireless access point deployments in commercial buildings where ceiling or communications-room mounting eliminates the need for per-fixture AC wiring.
Design consideration: verify that the aggregate PD class-based power draw across all 8 ports stays within the 480W budget, and confirm local AC mains input and cord region compatibility - the /AC-US suffix denotes the US plug variant.
This page synthesizes distributor availability, region-variant drop-in alternatives, and practical deployment notes not found in the manufacturer datasheet.
Drop-in-Alternativen für PDS-408G/AC-US – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PDS-408G/AC-US (gleiche Bauform und Footprint) – abweichend in Cooling, Product Type, PoE Standard, Management, Input Power.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PDS-408G/AC-EU
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →PDS-408G/AC-UK
✅ Drop-In✓ Auf Lager
Preis auf Anfrage
Datenblatt ansehen →PDS-408G/AC-AU
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PDS-408G/AC
✅ Drop-In✓ Auf Lager
$779 / Stück
Datenblatt ansehen →PDS-408G/F
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PDS-408G/M
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PDS-408G/AC-US Spezifikationen (herstellerveröffentlicht)
| Product Type | Digital Ceiling PoE Switch (managed) |
| Total PoE Ports | 8 |
| Total Ports | 11 (8+3) |
| Total PoE Power Budget | 480 W |
| Maximum Per-Port Power | 90 W |
| Full Power Mode | 60 W on all 8 ports simultaneously |
| PoE Standard | IEEE 802.3bt-compliant (also supports 802.3at-class PDs) |
| Power Allocation | Automatic, based on PoE PD device class |
| Cooling | Fan-less (silent operation) |
| Deployment Location | Ceiling or communications rooms |
| Management | Managed (remote management, VLAN, link aggregation) |
| Input Power | AC input, US plug cord (AC-US variant) |
| Enclosure Type | Fanless switch enclosure for ceiling mount |
| Manufacturer | Microchip Technology (originally Microsemi) |
PDS-408G/AC-US Schnittstellen & Anschlüsse
PDS-408G/AC-US bietet die folgenden, vom Hersteller veröffentlichten Schnittstellen und Anschlüsse: Leistungsaufnahme. Pinbelegung der Erweiterungsheader, Nummerierung der Anschlüsse und elektrische Grenzwerte sind in der Herstellerdokumentation definiert.
| Leistungsaufnahme | 8 |
Siehe die Herstellerdokumentation für die vollständige Pinbelegung der Erweiterungsleiste und die Nummerierung der Steckverbinder-Pins.
Leistungs- und thermische Eigenschaften
| Leistungsaufnahme | 8 |
| Kühlung | Fan-less (silent operation) |
Vom Hersteller veröffentlichte Leistungs- und thermische Parameter für PDS-408G/AC-US.
Typische Anwendungen
PDS-408G/AC-US ist geeignet für 6 Anwendungs: PoE LED Lighting (Digital Ceiling), Building Automation and Sensor Networks, IP Security Camera Deployment, Wireless Access Point Powering, Smart Office Retrofit Deployments, Communications Room and Structured Cabling Power Hub.
PoE LED Lighting (Digital Ceiling)
The PDS-408G/AC-US is purpose-built for digital ceiling PoE lighting, per the Microchip product page. Its 480W total budget with automatic class-based allocation lets a single switch power a mixed luminaire population, while the IEEE 802.3bt 90W per-port maximum covers high-output fixtures and the full-power 60W x 8 port mode supports uniform LED layouts. Luminaires receive both data and power over standard Ethernet cable, eliminating per-fixture AC wiring and electrician costs. The fanless design is essential in occupied ceiling spaces where fan noise is unacceptable, and managed VLAN support isolates lighting traffic on the corporate network.
Empfohlen
Building Automation and Sensor Networks
Occupancy, environmental, and control sensors mounted in ceilings benefit from the PDS-408G's combination of low-power Ethernet ports and centralized 480W PoE budget. Class-based automatic power allocation means low-power Class 1-3 sensors draw only their negotiated allocation, preserving headroom for higher-class loads on the same switch. The 3 additional ports provide uplink or local controller connectivity, and managed features such as VLAN and link aggregation segment building-automation traffic. Because the unit is fanless and ceiling-rated, it mounts directly above the sensor zone, shortening cable runs and simplifying commissioning of smart-building retrofits.
Empfohlen
IP Security Camera Deployment
IP cameras, including PTZ models that need the higher 802.3bt power classes, are well served by the PDS-408G/AC-US: any port can deliver up to 90W, so pan-tilt-zoom cameras with heaters negotiate their full class while fixed cameras draw their standard allocation, all against the 480W budget. Automatic class-based power output removes manual configuration per camera. The managed switch fabric supports VLANs to segregate video traffic and link aggregation for uplink bandwidth. Ceiling or communications-room mounting keeps the fanless switch out of sight while its remote management allows security teams to monitor per-port power status.
Empfohlen
Wireless Access Point Powering
Modern 802.11ax/Wi-Fi 6 and Wi-Fi 7 access points frequently require IEEE 802.3bt Class 6-8 power, which the PDS-408G/AC-US supplies at up to 90W per port. In ceiling deployments, the switch itself can sit in the plenum near the APs, with the 3 additional ports providing uplinks back to the core network and managed link aggregation combining uplinks for congested AP clusters. The 480W budget comfortably powers a mix of high-power and standard APs plus ancillary devices. Automatic class negotiation ensures each AP draws exactly its requirement without per-port configuration.
Empfohlen
Smart Office Retrofit Deployments
In retrofits where adding AC circuits is costly, the PDS-408G/AC-US lets installers reuse existing Category cable to power lighting, sensors, and access points from a single ceiling-mounted 480W source. Class-based PoE allocation means mixed legacy 802.3at and new 802.3bt devices coexist on the same switch, and the managed VLAN and remote management features let facility IT integrate the powered infrastructure without site visits. The fanless, silent enclosure suits occupied office environments, and the US-plug AC-US variant connects to standard North American mains for rapid deployment.
Empfohlen
Communications Room and Structured Cabling Power Hub
Beyond the ceiling, Microchip positions the PDS-408G for communications rooms, where it acts as a compact 480W PoE hub for downstream devices on structured cabling. Its fanless construction reduces cooling load and dust intake in closed closets, improving reliability versus fanned switches. Automatic per-port power by PD class simplifies adds/moves/changes: new devices are powered correctly on plug-in without configuration. The 8+3 port count covers eight powered endpoints plus dedicated uplink/service ports, and managed diagnostics allow remote troubleshooting of both data links and PoE delivery.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PDS-408G/AC-US – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PDS-408G/AC-EU | PDS-408G/AC-UK | PDS-408G/AC-AU | PDS-408G/AC | PDS-408G/F |
|---|---|---|---|---|---|---|
| Package | Fanless managed switch enclosure (8+3 port), US AC cord | Same enclosure - EU AC cord | Same enclosure - UK AC cord | Same enclosure - AU AC cord | Same enclosure - base AC ordering code | Same family enclosure - different input config |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Total PoE Power Budget | 480 W | 480 W | 480 W | 480 W | 480 W | 480 W |
| Max Per-Port Power | 90 W (IEEE 802.3bt) | 90 W | 90 W | 90 W | 90 W | 90 W |
| Port Count | 8+3 (11 total) | 8+3 | 8+3 | 8+3 | 8+3 | 8+3 |
| PoE Standard | IEEE 802.3bt-compliant | IEEE 802.3bt-compliant | IEEE 802.3bt-compliant | IEEE 802.3bt-compliant | IEEE 802.3bt-compliant | IEEE 802.3bt-compliant |
| Cooling | Fan-less | Fan-less | Fan-less | Fan-less | Fan-less | Fan-less |
| AC Cord / Plug Region | US plug (AC-US) | EU plug | UK plug | AU plug | Base code (cord per ordering table) | Different input configuration |
| Management | Managed (remote mgmt, VLAN, link aggregation) | Managed - same feature set | Managed - same feature set | Managed - same feature set | Managed - same feature set | Managed - same feature set |
Wichtigste Unterscheidungsmerkmale
- Complete certified 802.3bt solution vs discrete PSE IC builds (vs. PD69220C-022419)
- 90W per-port BT power headroom (vs. PDS-408G/AC-EU (and all family variants))
- Fan-less silent operation for occupied ceiling spaces (vs. PDS-408G/F (input-config variant))
Designhinweise
Budget the aggregate PoE load before deployment: the PDS-408G provides 480W total, with full-power mode of 60W on all 8 ports and a 90W ceiling on any single port per IEEE 802.3bt. Sum the negotiated class power of all connected PDs and keep at least 10-15% headroom for inrush and future additions. If a mix of high-class BT loads exceeds 480W, split them across two switches rather than relying on per-port caps alone, since the per-port negotiation does not by itself enforce the system budget.
The PDS-408G is fan-less, so all 480W-relevant losses are dissipated passively through the enclosure. In ceiling or plenum installations, verify ambient temperature near the mounting location, especially above LED drivers or in unventilated enclosures. Maintain the clearances specified in the Microchip datasheet DS00003432B and never mount the unit inside a sealed junction box; passive designs depend on free convection around the housing for their rating.
Match the ordering suffix to the local mains plug: /AC-US, /AC-EU, /AC-UK, or /AC-AU per the datasheet ordering table; ordering the wrong region variant delays installation even though the hardware is identical. Also confirm the PD class of each endpoint - legacy 802.3af/at devices negotiate lower classes automatically, but devices wired for non-standard high-power modes may not receive full power without 802.3bt LLDP class negotiation support on the PD side.
Compliance-Informationen
Product summaries state compliance with multiple safety and regulatory standards, but specific RoHS/REACH certificates were not enumerated in the verified data. IEEE 802.3bt compliance is confirmed per the Microchip product page and datasheet. The product originated from Microsemi (acquired by Microchip Technology).