PEX8680-AA50RBCF - 80-Lane PCIe Gen 2 Switch | Broadcom
Teilenummer: PEX8680-AA50RBCF ✗ AbgekündigtPEX8680-AA50RBCF Übersicht
A PCI Express switch is a semiconductor device that connects a host or upstream PCIe interface to multiple downstream endpoints. It belongs to the hierarchy of PCI Express interface ICs, bus controllers, interface semiconductors, and general-purpose integrated circuits. By distributing PCIe traffic across numerous lanes and ports, the PEX8680 class reduces system-routing complexity while preserving the protocol behavior required by modern servers, storage systems, and accelerator platforms.
Principal characteristics include support for 80 PCIe lanes, 20 ports, and a 5.0 GT/s generation-2 data rate. The square HBGA/FCBGA package uses ball terminals, while the documented minimum operating temperature is 0°C. These specifications place the device in the class of high-density switching silicon intended for complex computing platforms rather than small embedded or consumer systems.
The switch fabric provides multiple downstream connections from a common PCIe infrastructure. Lane sharing, device routing, and downstream-port coordination are important benefits when systems include numerous storage controllers, network interfaces, accelerators, or expansion cards. Its 1156-terminal package also requires a correspondingly dense PCB footprint, careful escape routing, and high-speed signal-integrity management to preserve performance across the PCIe Gen 2 interface.
Typical applications include server backplanes, external storage appliances, accelerator systems, network-attached storage, high-end workstation platforms, and test equipment that emulates multiple PCIe endpoint connections. In each case, the switch can consolidate endpoint traffic behind one upstream link, reducing the number of discrete host-to-device routing paths while supporting the 20-port topology.
A primary design consideration is that the 1156-FCBGA package is electrically and physically demanding. Board designers must use the manufacturer-recommended land pattern, ball assignments, reference design, and high-speed layout guidance. Thermal performance also depends on multilayer PCB construction, via arrays, power delivery, and heat spreading around the switch.
This product record combines the documented PCIe configuration and package details with a focused engineering assessment of alternatives, comparison parameters, and implementation considerations. It helps designers evaluate whether the PEX8680-AA50RBCF architecture and footprint align with an existing high-speed computing platform before beginning detailed signal-integrity and power-distribution work.
Drop-in-Alternativen für PEX8680-AA50RBCF – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
PEX8680-AA50RBCF-G
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PEX8680-AA50RBCF Grenzwerte & elektrische Eigenschaften
| Device Type | PCI Express switch IC |
| PCI Express Generation | Gen 2 |
| Datenrate | 5.0 GT/s |
| Lane Count | 80 lanes |
| Port Count | 20 ports |
| Gehäuse | 1156-FCBGA (35 x 35 mm) |
| Package Code | HBGA |
| Package Shape | Square |
| Terminal Form | Ball |
| Terminal Count | 1156 balls |
| Montageart | Surface mount |
| Minimum Operating Temperature | 0°C |
| Standard | PCI Express |
PEX8680-AA50RBCF square Pinbelegungsleitfaden
Pinbelegung für PEX8680-AA50RBCF (square-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.
Keine detaillierten Pinbelegungsdaten verfügbar für PEX8680-AA50RBCF.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PEX8680-AA50RBCF ist geeignet für 6 Anwendungs: Server PCIe Backplane, External Storage Appliance, Accelerator Computing Platform, Network-Attached Storage, High-End Workstation, PCIe Test and Measurement.
Server PCIe Backplane
The PEX8680-AA50RBCF fits server backplanes that must consolidate numerous downstream PCIe devices behind a shared upstream connection. Its 80 lanes and 20 ports provide a large switching fabric, while Gen 2 operation at 5.0 GT/s matches the documented interface class. The switch can simplify routing when storage controllers, network interfaces, and accelerators must coexist. The 1156-FCBGA package demands a dense multilayer board, continuous high-speed reference planes, and the manufacturer’s recommended ball-escape and via patterns to preserve signal integrity.
Empfohlen
External Storage Appliance
The PEX8680-AA50RBCF is suitable for storage appliances that need multiple PCIe endpoints behind one host-facing link. Twenty ports and 80 lanes allow controllers to be organized under a centralized switch fabric, reducing the number of independent root paths required by the system. Gen 2 operation at 5.0 GT/s provides a defined baseline for queueing, switching, and traffic distribution. Board implementation must account for the 1156-FCBGA footprint, uninterrupted return paths, and power-delivery requirements across all enabled lanes and ports.
Empfohlen
Accelerator Computing Platform
The PEX8680-AA50RBCF fits accelerator platforms that require several high-bandwidth PCIe endpoints to communicate through a common switching fabric. Its 80 lanes and 20 ports offer enough topology scale for accelerator, network, and storage devices, while its 5.0 GT/s Gen 2 interface defines the supported link rate. Because the switch sits on critical data paths, the 35 x 35 mm FCBGA requires careful layer transitions, matched reference routing, and thermal design that removes heat from the package without compromising high-speed return paths.
Empfohlen
Network-Attached Storage
The PEX8680-AA50RBCF can support network-attached storage systems that combine PCIe SSDs, controllers, and networking interfaces under a high-capacity switch. The 20-port arrangement allows multiple storage paths to be consolidated without replacing PCIe with a slower proprietary interconnect, and the 80-lane fabric provides substantial aggregate topology. Designers should use the manufacturer’s recommended power, clock, reset, and configuration arrangements while preserving continuous reference planes beneath the 1156-ball device. This reduces discontinuities that could degrade Gen 2 signal integrity.
Empfohlen
High-End Workstation
The PEX8680-AA50RBCF is applicable to high-end workstation platforms that need several PCIe expansion devices, storage controllers, or professional accelerator cards. Its 20 ports and 80 lanes provide a centralized routing fabric, while PCI Express Gen 2 operation at 5.0 GT/s provides the defined transport rate for those devices. The switch is better suited to densely engineered workstation logic boards than compact desktop add-in cards because of its 1156-FCBGA package. Thermal vias, power planes, and high-speed routing must be designed together to keep the dense switch stable under sustained traffic.
Empfohlen
PCIe Test and Measurement
The PEX8680-AA50RBCF supports test and measurement systems that need to present many PCIe endpoint relationships to a host or emulator. Twenty ports and 80 lanes enable multi-device topology testing, while the 5.0 GT/s Gen 2 interface provides a consistent link rate for traffic generation, fault injection, and protocol analysis. The large 1156-FCBGA footprint requires specialized board assembly and careful channel-length matching. Engineers should follow the manufacturer reference layout and validate eye margins, crosstalk, insertion loss, and return-path continuity across the complete switch fabric.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PEX8680-AA50RBCF – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PEX8680-AA50RBCF-G |
|---|---|---|
| Package | 1156-FCBGA (35 x 35 mm) | 1156-FCBGA (35 x 35 mm) |
| Brand | Broadcom | Broadcom |
| PCI Express Generation | Gen 2 | Gen 2 |
| Data Rate | 5.0 GT/s | 5.0 GT/s |
| Lane Count | 80 lanes | 80 lanes |
| Port Count | 20 ports | 20 ports |
| Terminal Count | 1156 balls | 1156 balls |
| Package Shape | Square | Square |
Wichtigste Unterscheidungsmerkmale
- Large integrated PCIe switching topology (vs. PEX8680-AA50RBCF-G)
- High-density 1156-ball package (vs. PEX8680-AA50RBCF-G)
- PCI Express Gen 2 compatibility (vs. PEX8680-AA50RBCF-G)
- Exact target ordering-code control (vs. PEX8680-AA50RBCF-G)
Designhinweise
Use the manufacturer’s 1156-FCBGA land pattern and ball map without substituting a generic BGA footprint. The package body is 35 x 35 mm and contains 1156 balls, so pad geometry, solder-mask definition, and ball-pitch details must match the released drawing. Assign every power, ground, configuration, and high-speed signal ball from the manufacturer pin-description tables before PCB release.
Preserve a continuous reference plane beneath the switching device and route high-speed PCIe links with the manufacturer’s recommended layer transitions and via geometry. Avoid stubs, unnecessary layer changes, and splits in the return path because the 5.0 GT/s interface requires controlled impedance and minimized crosstalk. Validate the completed layout with a field solver and equivalent-channel analysis rather than relying on nominal trace geometry alone.
Plan separate power-distribution resources for the switch’s core and I/O supply domains, including local high-frequency decoupling at the appropriate power balls. Keep supply and ground planes continuous across the 35 x 35 mm device and use adequate via arrays to reduce IR loss. The exact rail voltages, tolerances, sequencing, and capacitor values must be taken from the manufacturer datasheet before schematic release.
Treat the 1156-FCBGA as a major heat source in the board thermal design. Use the package thermal data to determine whether the PCB alone provides adequate heat spreading or whether additional thermal management is required. Consider thermal-via geometry near the device, multilayer construction, airflow direction, and nearby heat sources together. Perform thermal simulation with the actual board stack-up and enclosure rather than isolated package estimates.
Do not treat the F-to-G ordering-suffix difference as automatically interchangeable without checking the manufacturer’s product-change and configuration information. The available listings establish matching lane, port, data-rate, and package figures, but they do not establish every electrical, firmware, or lifecycle detail. Preserve exact ordering-code control in procurement and verify the selected revision against the target platform’s qualification records.
Compliance-Informationen
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact ordering code.