PIC16C62AT-10/SS - 8-bit PIC MCU, 3.5KB OTP, 10MHz, SSOP-28
Teilenummer: PIC16C62AT-10/SS ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $7.85 | $7,85 |
| 10 | $7.1 | $71,00 |
| 100 | $6.25 | $625,00 |
| 500 | $5.4 | $2.700,00 |
| 1.000 | $4.6 | $4.600,00 |
PIC16C62AT-10/SS Übersicht
An 8-bit microcontroller (MCU) is a single-chip computer that integrates a CPU, memory, and peripherals. Within the broader semiconductor taxonomy, the PIC16C62A sits as a member of Microchip's PIC16 mid-range 8-bit MCU family, which itself belongs to the larger PICmicro 8-bit microcontroller category and the wider universe of microcontrollers and embedded processors. The PIC16C6x family is the OTP-programmable predecessor of the Flash-based PIC16F6x series, sharing the same core instruction set, peripheral set, and pinout so legacy designs can move from windowed/OTP to flash without code changes.
Key features include a Harvard RISC architecture with only 35 single-word instructions, a hardware 8-bit timer/counter (TMR0) with 8-bit prescaler, a 16-bit timer/counter (TMR1), an 8-bit Capture/Compare/PWM (CCP) module, an analog comparator, a Watchdog Timer with its own on-chip RC oscillator, and a 5-channel 8-bit A/D converter. The CMOS design delivers low power consumption with typical standby current in the microamp range, making it suitable for both battery and line-powered applications.
Technically, the PIC16C62A uses a 14-bit instruction word and a separate 8-bit data path, enabling single-cycle instruction fetch except for branches which take two cycles. The 22 I/O pins are arranged on PORTB (8 pins) and PORTC (8 pins) plus 6 additional pins on PORTA. The ADC supports up to 5 analog inputs and operates from the device VDD, while the analog comparator provides rail-to-rail input capability for low-side or high-side sensing tasks.
Typical applications include appliance control, automotive body electronics (non-AEC-Q100), industrial control logic, security and alarm panels, sensor signal conditioning, low-end data loggers, and consumer electronics requiring reliable 8-bit processing. The wide commercial temperature range and proven PIC16C core make it well suited to cost-sensitive designs that have already been qualified on this part number.
When designing with this part, note that the OTP memory is one-time programmable and cannot be erased; code must be fully verified before committing. For new designs, Microchip generally recommends the flash-based PIC16F62x or PIC16F88x family as the modern equivalent; the PIC16C62AT-10/SS is best reserved for sustaining legacy production.
This page synthesizes distributor pricing, drop-in PIC16C6x alternatives, and practical design notes not always found in the manufacturer datasheet.
Drop-in-Alternativen für PIC16C62AT-10/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16C62AT-10/SS (gleiche Bauform und Footprint) – abweichend in Program Memory Type, Operating Temperature Range, Package, Timers, RoHS Status.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16C62A-10/SS
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
PIC16C62A-04/SS
✅ Drop-In✓ Auf Lager
$2.84 / Stück
Datenblatt ansehen →PIC16C62AT-10E/SS
✅ Drop-In✓ Auf Lager
$3.55 / Stück
Datenblatt ansehen →PIC16C62A-04E/SS
✅ Drop-In✓ Auf Lager
$5.07 / Stück
Datenblatt ansehen →PIC16C622T-20I/SS
✅ Drop-In✓ Auf Lager
$1.85 / Stück
Datenblatt ansehen →PIC16F627A-I/SS
✅ Drop-In✓ Auf Lager
$1.12 / Stück
Datenblatt ansehen →PIC16C62AT-10/SS Grenzwerte & elektrische Eigenschaften
| Core Architecture | 8-bit PIC16C RISC, Harvard |
| Program Memory Type | One-Time Programmable (OTP) EPROM |
| Program Memory Size | 3.5 KB (2K x 14) |
| Data RAM | 128 bytes |
| Data EEPROM | 0 bytes (not present) |
| Maximale Taktfrequenz | 10 MHz |
| Instruction Cycle Time | 200 ns at 10 MHz (4 TCY per instruction) |
| Instruction Set Size | 35 single-word instructions |
| Operating Voltage Range | 3.0 V to 5.5 V |
| I/O Pins | 22 |
| Timers | TMR0 (8-bit + 8-bit prescaler), TMR1 (16-bit) |
| A/D Converter | 8-bit, up to 5 channels |
| Analog Comparator | Yes (1x) |
| CCP Module | 1 (Capture / Compare / PWM) |
| Watchdog Timer | Yes, with dedicated on-chip RC oscillator |
| Brown-out Reset | Yes |
| Betriebstemperaturbereich | 0C to +70C (commercial) |
| Gehäuse | 28-pin SSOP (5.30 mm body, 208 mil) |
| Montageart | Surface Mount |
| MSL-Level | 1 |
| RoHS-Status | Non-RoHS (legacy OTP, contains Pb in EPROM window/lead finish variants) |
| Programming Method | ICSP (In-Circuit Serial Programming) via RB6/RB7 |
PIC16C62AT-10/SS Pin-Konfiguration
| Pin 1 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Pin 2 | RA0/AN0 — PORTA bit 0 / Analog input channel 0 |
| Pin 3 | RA1/AN1 — PORTA bit 1 / Analog input channel 1 |
| Pin 4 | RA2/AN2 — PORTA bit 2 / Analog input channel 2 |
| Pin 5 | RA3/AN3/VREF — PORTA bit 3 / Analog input channel 3 / ADC reference |
| Pin 6 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input |
| Pin 7 | RA5/AN4/SS — PORTA bit 5 / Analog input channel 4 / SPI slave select |
| Pin 8 | OSC1/CLKIN — Crystal oscillator input / external clock input |
| Pin 9 | OSC2/CLKOUT — Crystal oscillator output / clock output |
| Pin 10 | VSS — Ground reference |
| Pin 11 | RC0 — PORTC bit 0 |
| Pin 12 | RC1 — PORTC bit 1 |
| Pin 13 | RC2/CCP1 — PORTC bit 2 / Capture-Compare-PWM output |
| Pin 14 | RC3 — PORTC bit 3 |
| Pin 15 | RC4 — PORTC bit 4 |
| Pin 16 | RC5 — PORTC bit 5 |
| Pin 17 | RC6 — PORTC bit 6 |
| Pin 18 | RC7 — PORTC bit 7 |
| Pin 19 | VSS — Ground reference |
| Pin 20 | VDD — Positive supply voltage |
| Pin 21 | RB0/INT — PORTB bit 0 / External interrupt input |
| Pin 22 | RB1 — PORTB bit 1 |
| Pin 23 | RB2 — PORTB bit 2 |
| Pin 24 | RB3 — PORTB bit 3 |
| Pin 25 | RB4 — PORTB bit 4 |
| Pin 26 | RB5 — PORTB bit 5 |
| Pin 27 | RB6/PGC — PORTB bit 6 / ICSP clock |
| Pin 28 | RB7/PGD — PORTB bit 7 / ICSP data |
Typische Anwendungen
PIC16C62AT-10/SS ist geeignet für 6 Anwendungs: Appliance Control Boards, Security and Alarm Panels, Industrial Sensor Conditioning, Automotive Body Electronics (Non-Safety), Consumer Electronics Remote Controls and HMI, Data Logging and Standalone Instrumentation.
Appliance Control Boards
The PIC16C62AT-10/SS is well suited to legacy appliance control designs including washing machines, dishwashers, microwave ovens, and HVAC controls. The 10 MHz PIC16C core executes the sensor-polling and relay-actuation loops with sufficient margin, while the 8-bit ADC reads thermistor, water level, and pressure sensor inputs. The 22 I/O pins drive relay banks, triac triggers, and LED indicators. The wide 5V tolerance simplifies integration with TRIAC optocouplers, and the commercial temperature range covers kitchen and laundry environments.
Empfohlen
Security and Alarm Panels
For alarm control panels, PIR sensor conditioning, and keypad scanners, the PIC16C62AT-10/SS provides the deterministic PIC16C core needed for time-critical loop supervision. The analog comparator enables window-comparator based PIR signal processing, while the 8-bit ADC digitizes battery voltage and zone loop current. The brown-out reset ensures clean restart on power dips, and the watchdog timer protects against firmware lockup in unattended panels. The 28-pin SSOP footprint is well suited to compact wall-mount enclosures.
Empfohlen
Industrial Sensor Conditioning
Industrial sensor front-ends and slow control loops benefit from the PIC16C62AT-10/SS combination of an 8-channel-capable ADC (5 active channels), analog comparator, and 10 MHz CPU core. The device reads 4-20 mA loop receivers via shunt voltage, conditions RTD or thermocouple signals with external amplifiers, and drives isolated output stages. The hardware USART-less design relies on software bit-banging for field buses, making this MCU best for asynchronous polling loops at baud rates up to 9600 bps.
Empfohlen
Automotive Body Electronics (Non-Safety)
The PIC16C62AT-10/SS is widely deployed in non-safety automotive body electronics such as window lift modules, seat controllers, mirror adjusters, and lighting controls, although it is NOT AEC-Q100 qualified. The 5V supply tolerates the 12V battery bus after regulation, and the PIC16C core handles LIN-like software-UART bit-banging for body control networks. For new automotive designs, Microchip recommends AEC-Q100 qualified PIC16F or dsPIC variants in the same SSOP-28 footprint.
Empfohlen
Consumer Electronics Remote Controls and HMI
In consumer remote controls, small appliances, and HMI panels, the PIC16C62AT-10/SS delivers responsive button scanning and LED feedback at very low cost. The 22 I/O accommodate matrix keypads, rotary encoders, and 7-segment or LCD multiplexing. Low-power CMOS standby modes extend battery life in remote-style products, and the SSOP-28 package fits inside handheld enclosures. The OTP memory is acceptable for high-volume consumer products where firmware is locked.
Empfohlen
Data Logging and Standalone Instrumentation
Low-speed standalone data loggers benefit from the PIC16C62AT-10/SS combination of a 10 MHz CPU, 8-bit ADC, and 22 I/O. The device samples sensor inputs at intervals controlled by TMR1, writes records to external EEPROM or FRAM via bit-banged I2C, and toggles status LEDs. Brown-out reset and watchdog timer are essential for unattended logger reliability. The SSOP-28 footprint keeps the design compact for portable logger enclosures.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16C62AT-10/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16C62A-10/SS | PIC16C62A-04/SS | PIC16C62AT-10E/SS | PIC16C622T-20I/SS | PIC16F627A-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | SSOP-28 | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same | SSOP-28 - same |
| Memory Type | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | OTP EPROM | Flash |
| Program Memory | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB | 3.5 KB | 1 KB |
| Max Clock Speed | 10 MHz | 10 MHz | 4 MHz (-60%) | 10 MHz | 20 MHz (+100%) | 20 MHz |
| Operating Voltage | 3.0-5.5 V | 3.0-5.5 V | 3.0-5.5 V | 3.0-5.5 V | 3.0-5.5 V | 2.0-5.5 V |
| Temperature Range | 0C to +70C | 0C to +70C | 0C to +70C | -40C to +125C | -40C to +85C | -40C to +85C |
| RoHS Status | Non-RoHS | Non-RoHS | Non-RoHS | Non-RoHS | Non-RoHS | RoHS |
Wichtigste Unterscheidungsmerkmale
- Higher speed grade versus lower-cost alternative (vs. PIC16C62A-04/SS)
- Wider temperature range than commercial-only competitor (vs. PIC16C62A-10/SS)
- Field-reprogrammable memory type vs OTP (vs. PIC16F627A-I/SS)
Designhinweise
Estimated: OTP memory cannot be erased once programmed. Before programming production units, fully verify firmware on a flash-based equivalent such as PIC16F627A-I/SS to avoid bricking inventory. A code-size check (sum of instruction words vs 2048 available) and a checksum verify step must be included in the production programming flow. Carry out at least 100 engineering-trial units to validate end-customer use cases before committing OTP stock.
Place a 100 nF decoupling capacitor as close as possible to the VDD pin (pin 20) and a bulk 10 uF tantalum or ceramic capacitor near the VSS pin (pin 10). Add a 10 kohm pull-up on MCLR/VPP (pin 1) to VDD with a 100 nF cap for noise immunity; do not float MCLR or the part will reset intermittently. Brown-out reset should be enabled in the configuration word to guarantee clean startup on power dips.
The 28-pin SSOP package has 0.65 mm pitch pads and a thermal pad slug; route power traces with at least 0.3 mm width and avoid routing noisy signals under the IC. Keep the crystal or resonator within 10 mm of OSC1/OSC2 (pins 8-9) with short, symmetric traces and a guard ground to prevent jitter. Maintain a continuous ground plane on the bottom layer and stitch vias around the IC perimeter for EMI suppression.
Compliance-Informationen
PIC16C62A family is generally non-RoHS due to original OTP lead finish; some factory-lot variants may carry RoHS finish and must be confirmed at order. Not AEC-Q100 qualified; for automotive designs use AEC-Q100 PIC16F or dsPIC equivalents.
