PIC16C64AT-04I/PQ - 8-Bit 4MHz OTP MCU, 44-MQFP | Microchip
Teilenummer: PIC16C64AT-04I/PQ ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $10.79 | $10,79 |
| 10 | $10.2 | $102,00 |
| 100 | $9.1 | $910,00 |
| 500 | $8.25 | $4.125,00 |
| 1.000 | $7.55 | $7.550,00 |
PIC16C64AT-04I/PQ Übersicht
Background: 8-bit microcontrollers (MCUs) are single-chip computers integrating a CPU core, program memory, data RAM, peripherals, and I/O on a single die. The PIC16C family uses Microchip's enhanced Harvard RISC architecture, which separates program and data buses to allow simultaneous fetch and execute, yielding deterministic instruction timing. The PIC16C64A belongs to the mid-range PIC family (14-bit instruction word), and OTP variants are programmed once at production and cannot be erased, which keeps unit cost low for high-volume embedded products.
Key features include a RISC instruction set with only 35 single-word instructions, 14-bit wide program memory, 8-bit data path, programmable code protection, a Watchdog Timer with its own on-chip RC oscillator, power-saving SLEEP mode, and three hardware timers (Timer0, Timer1, Timer2). It also integrates a Universal Synchronous Asynchronous Receiver Transmitter (USART) for serial communications. Industrial-grade -40C to +85C operating temperature (I-grade) makes the part suitable for harsh environments.
The architecture uses a 14-bit program counter that can address up to 8K x 14 words of program memory. The ALU is 8-bit wide and operates on a working register (W) and the data memory. Brown-out Reset, Power-on Reset, and a programmable code-protect bit are also integrated.
Typical applications include industrial control (sensor interfacing, motor control, lighting controllers), automotive body electronics (climate controls, instrument clusters), consumer appliances (washing machines, microwave ovens), and general-purpose embedded systems (keypad scanners, smart sensors, security panels) where a low-cost, low-pin-count controller suffices.
When designing with the PIC16C64AT-04I/PQ, plan for an OTP programming step during manufacturing (no field re-programmability). Ensure a stable 5V supply, a decoupling capacitor close to VDD/VSS, and observe the in-circuit serial programming (ICSP) pinout if field upgrade or factory programming is needed. For new designs consider PIC16F variants for Flash reprogrammability.
This page synthesizes real distributor pricing, drop-in alternative cross-references and practical design notes that the manufacturer datasheet does not consolidate.
Drop-in-Alternativen für PIC16C64AT-04I/PQ – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16C64AT-04I/PQ (gleiche Bauform und Footprint) – abweichend in Operating Temperature Range, Package, Timers, Program Memory Type, Core Architecture.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16C64A-04I/PQ
✅ Drop-In✓ Auf Lager
$6.4 / Stück
Datenblatt ansehen →PIC16C64AT-04E/PQ
✅ Drop-In✓ Auf Lager
$6.8 / Stück
Datenblatt ansehen →PIC16C64AT-04/PT
✅ Drop-In✓ Auf Lager
$11.4 / Stück
Datenblatt ansehen →PIC16C64A-04E/PQ
✅ Drop-In✓ Auf Lager
$5.4 / Stück
Datenblatt ansehen →PIC16C64A-04/PQ
✅ Drop-In✓ Auf Lager
$4.3 / Stück
Datenblatt ansehen →PIC16C64AT-04E/L
✅ Drop-In✓ Auf Lager
$6.1 / Stück
Datenblatt ansehen →PIC16C64AT-04I/PQ Grenzwerte & elektrische Eigenschaften
| Core Architecture | PIC16 (8-bit Harvard RISC) |
| Instruction Set | 35 single-word instructions, 14-bit wide |
| Maximale Taktfrequenz | 4 MHz |
| Program Memory Type | OTP (One-Time Programmable) EPROM |
| Program Memory Size | 3.5 KB (2K x 14) |
| RAM Size | 128 bytes |
| I/O Pins | 33 |
| Supply Voltage (VDD) | 5 V nominal |
| Betriebstemperaturbereich | -40C to +85C (Industrial) |
| Gehäuse | 44-MQFP (10x10 mm) |
| Package Mounting | Surface Mount |
| Timers | Timer0, Timer1, Timer2 |
| Communication | USART/SCI |
| Watchdog Timer | Yes, with on-chip RC oscillator |
| Power-Saving Mode | SLEEP mode |
| Programmable Code Protection | Yes |
PIC16C64AT-04I/PQ Pin-Konfiguration
| Pin 1 | RE2 — I/O port E bit 2 |
| Pin 2 | RE1 — I/O port E bit 1 |
| Pin 3 | RE0 — I/O port E bit 0 |
| Pin 4 | OSC1 — Crystal/resonator input or external clock in |
| Pin 5 | OSC2 — Crystal/resonator output |
| Pin 6 | RC0 — I/O port C bit 0 |
| Pin 7 | RC1 — I/O port C bit 1 |
| Pin 8 | RC2 — I/O port C bit 2 |
| Pin 9 | RC3 — I/O port C bit 3 |
| Pin 10 | RD0 — I/O port D bit 0 |
| Pin 11 | RD1 — I/O port D bit 1 |
| Pin 12 | RD2 — I/O port D bit 2 |
| Pin 13 | RD3 — I/O port D bit 3 |
| Pin 14 | RD4 — I/O port D bit 4 |
| Pin 15 | RD5 — I/O port D bit 5 |
| Pin 16 | RD6 — I/O port D bit 6 |
| Pin 17 | RD7 — I/O port D bit 7 |
| Pin 18 | VSS — Ground reference |
| Pin 19 | VSS — Ground reference |
| Pin 20 | VDD — +5V supply |
| Pin 21 | VDD — +5V supply |
| Pin 22 | RB0 — I/O port B bit 0 (INT) |
| Pin 23 | RB1 — I/O port B bit 1 |
| Pin 24 | RB2 — I/O port B bit 2 |
| Pin 25 | RB3 — I/O port B bit 3 |
| Pin 26 | RB4 — I/O port B bit 4 |
| Pin 27 | RB5 — I/O port B bit 5 |
| Pin 28 | RB6 — I/O port B bit 6 (PGC) |
| Pin 29 | RB7 — I/O port B bit 7 (PGD) |
| Pin 30 | RC4 — I/O port C bit 4 |
| Pin 31 | RC5 — I/O port C bit 5 |
| Pin 32 | RC6 — I/O port C bit 6 (TX) |
| Pin 33 | RC7 — I/O port C bit 7 (RX) |
| Pin 34 | MCLR/VPP — Master Clear (Reset) input / Programming voltage |
| Pin 35 | NC — Not connected (per datasheet) |
| Pin 36 | NC — Not connected (per datasheet) |
| Pin 37 | NC — Not connected (per datasheet) |
| Pin 38 | NC — Not connected (per datasheet) |
| Pin 39 | NC — Not connected (per datasheet) |
| Pin 40 | NC — Not connected (per datasheet) |
| Pin 41 | NC — Not connected (per datasheet) |
| Pin 42 | NC — Not connected (per datasheet) |
| Pin 43 | NC — Not connected (per datasheet) |
| Pin 44 | NC — Not connected (per datasheet) |
Typische Anwendungen
PIC16C64AT-04I/PQ ist geeignet für 6 Anwendungs: Industrial Sensor Interfacing and Control, Automotive Body Electronics, Home Appliance Control Boards, Security and Access Control Panels, Hobbyist and Educational Embedded Projects, Legacy Industrial Replacement and Aftermarket Service.
Industrial Sensor Interfacing and Control
The PIC16C64AT-04I/PQ is well suited to industrial sensor interfacing and control applications where moderate processing power, deterministic timing and a generous complement of 33 I/O pins are required. Its 3.5KB OTP memory comfortably holds typical sensor-acquisition and actuation algorithms for temperature, pressure, flow or proximity sensor front ends. The four 8-bit ports (B/C/D) and three extra lines on port E let the MCU scan multiple analog sensors via external ADCs or digital sensors via SPI/I2C bit-banging, while the integrated USART provides RS-232/RS-485 connectivity to a SCADA or PLC backplane. Industrial-grade -40C to +85C operation and the Watchdog Timer with on-chip RC oscillator ensure reliable recovery from EMI-induced lockups common on factory floors.
Empfohlen
Automotive Body Electronics
The PIC16C64AT-04I/PQ serves well in automotive body electronics applications such as instrument clusters, climate controls, seat-position controllers and lighting modules, where its 8-bit PIC16 RISC core delivers predictable interrupt latency and a small code footprint. The 33 I/O pins can drive multiplexed LED or LCD displays, scan keypads and read multiple switches simultaneously, while the three hardware timers (TMR0/TMR1/TMR2) handle PWM for dimming and motor speed control. The industrial -40C to +85C temperature range handles most cabin environments, and the integrated SLEEP mode reduces quiescent current during vehicle-off states. Note that under-hood or near-engine applications require the -40C to +125C extended-temperature PIC16C64AT-04E/PQ variant instead.
Empfohlen
Home Appliance Control Boards
In home appliance control boards (washing machines, microwave ovens, dishwashers, refrigerators), the PIC16C64AT-04I/PQ provides a low-cost, OTP-programmed solution with sufficient memory and I/O for relay drivers, sensor inputs and user-interface handling. Its 3.5KB program memory holds a typical appliance state machine, the 33 I/O lines drive segment displays, LEDs, keypads, buzzer, motor relays and triac interfaces, and the USART enables factory test and field diagnostics. OTP programming keeps unit cost low for high-volume appliances, and the industrial -40C to +85C range handles the thermal environment behind a control panel.
Empfohlen
Security and Access Control Panels
The PIC16C64AT-04I/PQ is well matched to security and access control panels (alarm keypads, RFID readers, door controllers) where deterministic scan timing, code protection and modest memory are essential. Programmable code protection prevents cloning of the access-control firmware. The 33 I/O pins support matrix keypads, LEDs, buzzers, magnetic-door sensors and relay outputs for electric strikes, while the integrated USART connects to a central alarm panel or RS-485 multi-drop bus. The Watchdog Timer with on-chip RC oscillator guarantees recovery from firmware lockups caused by EMI from nearby wiring.
Empfohlen
Hobbyist and Educational Embedded Projects
The PIC16C64AT-04I/PQ is widely used in hobbyist and educational embedded projects because the PIC16 instruction set is simple to learn (only 35 single-word, 14-bit instructions) and freely available MPLAB X IDE and XC8 compiler tools let students program and debug it on a breadboard. Its 33 I/O pins and USART make it large enough to drive educational peripherals such as seven-segment LED arrays, character LCDs, keypads and stepper motors, yet small enough to fit in a single-lab-session demonstration. The low unit cost (~$10 at qty 1) and broad availability through educational suppliers keep it a popular teaching platform despite its obsolete status.
Empfohlen
Legacy Industrial Replacement and Aftermarket Service
The PIC16C64AT-04I/PQ is in continuous demand for legacy industrial replacement and aftermarket service applications, where existing PIC16C64A designs in PLCs, motor drives, instrumentation and process controllers must be kept operational for 10 to 20 years. Because Microchip has classified the part obsolete, only authorized and aftermarket distributors carry inventory, but the PIC16C64A family shares the same instruction set, memory map and pinout, so qualified replacements (PIC16C64A-04I/PQ, PIC16C64AT-04E/PQ) are drop-in compatible. This page helps engineers and procurement teams source genuine, traceable parts for service contracts while planning a long-term migration path to PIC16F or PIC18F family devices.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16C64AT-04I/PQ – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16C64A-04I/PQ | PIC16C64AT-04E/PQ | PIC16C64AT-04/PT | PIC16C64A-04E/PQ | PIC16C64A-04/PQ | PIC16C64AT-04E/L |
|---|---|---|---|---|---|---|---|
| Package | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-TQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) | 44-MQFP (10x10 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Program Memory | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) | 3.5 KB OTP (2K x 14) |
| RAM | 128 B | 128 B | 128 B | 128 B | 128 B | 128 B | 128 B |
| I/O Pins | 33 | 33 | 33 | 33 | 33 | 33 | 33 |
| Max Clock Frequency | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz | 4 MHz |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +125C (Extended) | 0C to +70C (Commercial) | -40C to +125C (Extended) | 0C to +70C (Commercial) | -40C to +125C (Extended) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Wichtigste Unterscheidungsmerkmale
- Direct industrial-temperature drop-in replacement (vs. PIC16C64A-04I/PQ)
- Higher temperature grade option (extended) (vs. PIC16C64AT-04E/PQ)
- Legacy industrial qualification and code-protection (vs. Generic 8-bit Flash MCU)
Designhinweise
Place a 100 nF ceramic decoupling capacitor as close as physically possible to each VDD/VSS pin pair (44-MQFP pins 18-19 for VSS and pins 20-21 for VDD). Add a bulk 10 uF tantalum or aluminum-polymer capacitor on the supply rail within 25 mm of the package. The PIC16C64AT-04I/PQ draws approximately 5 mA active and 1 uA in SLEEP at 5 V, 4 MHz, so decoupling requirements are modest but mandatory for EMI-sensitive industrial environments.
Because PIC16C64AT-04I/PQ is OTP (One-Time Programmable), there is NO field re-programmability once the part has been programmed. Plan the programming step carefully during manufacturing, verify the entire code base in-circuit emulation (PIC16C64A ICE) before committing to OTP, and budget a small yield-loss percentage. For development, always prototype with a windowed UV-erasable PIC16C64A or a Flash PIC16F887-I/P equivalent.
Route the 4 MHz crystal or ceramic resonator traces to OSC1/OSC2 (pins 4/5) as short as possible (< 5 mm) and shield them with a ground pour. Keep high-current switching traces (relay drivers, triac control) at least 5 mm away from the oscillator network to avoid injecting noise into the system clock. The MCLR/VPP pin (pin 34) requires a 10 kohm pull-up to VDD and a 100 nF capacitor to ground for in-circuit serial programming (ICSP) compatibility.
At 5 V and 4 MHz with all 33 I/O pins unloaded, the PIC16C64AT-04I/PQ dissipates approximately 25 mW. In the 44-MQFP package with a typical theta_JA of 60 C/W, this results in a 1.5 C temperature rise above ambient - well within the -40C to +85C industrial rating. Heatsinking is not required, but adequate PCB copper (at least 100 mm^2 of GND pour) is recommended to keep junction temperature low under heavy I/O switching loads.
Compliance-Informationen
RoHS status not explicitly stated in the Verified Web Data; this part predates broad RoHS adoption and may need verification with the supplier. AEC-Q100 qualification not applicable for non-automotive-grade MCU.
