PIC16F707-I/MV - 8-Bit 20MHz MCU with mTouch | Microchip
Teilenummer: PIC16F707-I/MV ✓ AktivPIC16F707-I/MV Übersicht
A PIC16F707 is a flash-programmable microcontroller within the PIC16 family and belongs to the broader embedded-controller and semiconductor hierarchy. These devices integrate a CPU core, program memory, data RAM, timers, serial interfaces, analog peripherals, and interrupt handling into one device. The PIC16F707 specifically emphasizes nanoWatt XLP technology and capacitive-touch sensing, allowing designers to build user interfaces, access controls, appliance controls, and compact sensor nodes without separate touch controllers.
The headline specifications are an 8-bit architecture, 20 MHz maximum speed, 14 KB of Flash memory organized as 8K by 14 bits, and a 40-UQFN 5 mm by 5 mm package. The manufacturer product page describes the family as providing 32 capacitive-touch channels. The device also supports operation from 1.8 V to 5.5 V, which covers low-voltage battery-powered designs as well as conventional 3.3 V and 5 V embedded systems. Its XLP focus is important for portable products because sleep-mode behavior can reduce average power consumption when the application is mostly idle.
The PIC16F707-I/MV belongs to the 40-pin and 44-pin Flash microcontroller group covered by the Microchip PIC16(L)F707 data sheet. The /I suffix identifies the industrial temperature grade, while /MV identifies the 40-pin UQFN package configuration. The same family also appears in a 44-pin TQFP configuration, demonstrating that designers can choose a package suited to board assembly and inspection requirements. For the UQFN version, careful PCB land-pattern design and exposed-pad thermal management are essential during layout and assembly.
Typical applications include capacitive-touch keypads, household appliance controls, building-access terminals, compact industrial panels, sensor-interface modules, and low-power embedded products. The small UQFN footprint helps reduce board area, while the 8-bit architecture simplifies firmware development for control-oriented tasks. For designs requiring greater processing bandwidth or a larger program-memory budget, a more capable PIC microcontroller may be preferable, but the PIC16F707 offers a focused combination of touch sensing, Flash memory, and XLP-oriented operation.
For implementation, begin with the manufacturer pin-description table and the 40-UQFN land pattern when assigning PCB tracks. Follow the datasheet's recommended decoupling and exposed-pad layout, and validate the capacitive-touch electrodes with the specified grounding and filtering guidance. Treat the /MV suffix as package-specific rather than as a generic PIC16F707 order code.
This product page combines manufacturer device information, exact-MPN distributor records, package distinctions, replacement context, and application-oriented engineering guidance to support component selection, PCB planning, firmware preparation, and sourcing decisions.
Drop-in-Alternativen für PIC16F707-I/MV – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F707-I/MV (gleiche Bauform und Footprint) – abweichend in Package, ADC, Core Architecture, Internal Oscillator, Program Memory (Flash).
PIC16F1827-I/MV
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F18856-I/MV
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F707-I/MV Grenzwerte & elektrische Eigenschaften
| Microcontroller Type | 8-bit PIC XLP flash microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 14 KB (8K x 14 bits) |
| Operating Voltage Range | 1.8 V to 5.5 V |
| Internal Oscillator | 16 MHz |
| Capacitive Touch Channels | 32 channels |
| Touch Technology | mTouch capacitive touch |
| Gehäuse | 40-UQFN (5 mm x 5 mm) |
| Pin-Anzahl | 40 pins |
| Montageart | Surface mount |
| Temperature Grade | Industrial grade |
| Low-Power Technology | nanoWatt XLP technology |
| Programming Memory Type | Flash |
PIC16F707-I/MV 40-uqfn (5 mm x 5 mm) Pinbelegungsleitfaden
Pinbelegung für PIC16F707-I/MV (40-uqfn (5 mm x 5 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC16F707-I/MV.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC16F707-I/MV ist geeignet für 6 Anwendungs: Capacitive-Touch Appliance Controls, Access-Control Keypads, Battery-Powered Sensor Nodes, Industrial Control Interfaces, Compact Building-Environment Controls, Low-Power Human-Interface Modules.
Capacitive-Touch Appliance Controls
The PIC16F707-I/MV fits appliance control panels because the manufacturer identifies up to 32 capacitive-touch channels alongside an 8-bit CPU and 14 KB of Flash program memory. A single microcontroller can scan touch keys, interpret user commands, drive indicators, and control relays without a separate touch-controller device. Its 1.8 V to 5.5 V operating range supports low-voltage panel electronics, while the 40-UQFN 5 mm by 5 mm footprint reduces board area. Designers should use the data-sheet touch-electrode and guard-trace recommendations and verify that every pin used for touch sensing remains compatible with the selected keypad layout.
Empfohlen
Access-Control Keypads
The PIC16F707-I/MV is suitable for access-control keypads that combine a capacitive surface with compact local control. Its 32-channel mTouch capability can reduce the number of discrete touch sensors and supporting components, while the 14 KB Flash memory provides room for keypad scanning, credential logic, indicator control, and communications routines. The 8-bit architecture remains practical for this control-oriented workload. The small 40-UQFN package supports dense panel electronics, but the exposed pad and fine-pitch lands require assembly-capable PCB design and careful inspection under magnification.
Empfohlen
Battery-Powered Sensor Nodes
The PIC16F707-I/MV can serve as the control core of a compact sensor node because it combines XLP-oriented power features with a 1.8 V minimum operating voltage and a 16 MHz internal oscillator. The 20 MHz maximum processing capability supports responsive acquisition and local filtering, while Flash memory allows field-updatable firmware. Using sleep modes between sensor events can reduce average consumption, but the final battery budget must be calculated from the family data sheet's active, idle, sleep, and peripheral currents. Board-level EMI control and power decoupling are also important when external sensors and radio circuitry share a small enclosure.
Empfohlen
Industrial Control Interfaces
The PIC16F707-I/MV is appropriate for small industrial control interfaces that need local sensing, touch input, and deterministic control in one package. The 8-bit CPU and 14 KB Flash memory are suitable for supervisory tasks, while the industrial-grade /I ordering is appropriate for environments requiring an extended temperature grade. The 1.8 V to 5.5 V range allows integration with common industrial signal levels after suitable protection. Designers should isolate external field wiring, provide robust input filtering, and validate EMC performance because the compact UQFN footprint leaves limited space for surge-protection components.
Empfohlen
Compact Building-Environment Controls
The PIC16F707-I/MV can implement compact room-control or building-automation modules with capacitive buttons and local sensor handling. Its XLP focus supports designs that spend substantial time idle, and the small 40-UQFN package is useful in wall-control units where space is constrained. The microcontroller can manage touch input, setpoints, status LEDs, and low-speed communications without a separate processor. For reliability, separate sensitive analog routing from touch electrodes, follow the recommended grounding scheme, and verify operation across the complete temperature range expected for the installed equipment.
Empfohlen
Low-Power Human-Interface Modules
The PIC16F707-I/MV works well in a compact human-interface module because it combines 32 capacitive-touch channels, Flash program memory, and low-voltage operation in one 5 mm by 5 mm package. Engineers can implement touch-driven mode selection, status feedback, and system control while avoiding the area occupied by multiple dedicated input devices. The internal 16 MHz oscillator simplifies clock design, but firmware must manage sleep entry and wake behavior carefully to obtain the intended power advantage. PCB designers should preserve the manufacturer's touch-electrode geometry and keep noisy switching or high-current paths away from sensitive sensing nodes.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F707-I/MV – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F1827-I/MV | PIC16F18856-I/MV |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 40-UQFN (5 mm x 5 mm) | 40-UQFN /MV - same package code | 40-UQFN /MV - same package code |
| Architecture | 8-bit PIC | 8-bit PIC | 8-bit PIC |
| Temperature Grade | Industrial grade | Industrial grade | Industrial grade |
Wichtigste Unterscheidungsmerkmale
- Dedicated capacitive-touch channel capacity (vs. PIC16F1827-I/MV)
- Documented 14 KB Flash and 20 MHz configuration (vs. PIC16F18856-I/MV)
- Explicit low-voltage operating range (vs. PIC16F1827-I/MV)
Designhinweise
Use the official 40-UQFN land pattern and pin table when assigning signals. The /MV package has 40 pins and a small 5 mm by 5 mm body, so route escape traces directly to the exposed pad and use a PCB assembly process capable of handling fine-pitch lands. Confirm pad dimensions, solder-mask opening, paste volume, and exposed-pad connection against the manufacturer package drawing before releasing artwork.
Place the required input and output capacitors close to their respective device pins, with the shortest possible return path to ground. The device operates from 1.8 V to 5.5 V, so verify every external peripheral can tolerate the selected rail. For battery-powered designs, calculate average consumption using active and sleep current from the family data sheet and include the load current of the external sensor or communication circuit.
Follow the mTouch layout guidance for electrode geometry, guard traces, grounding, and filtering. Keep switching regulators, relay drivers, high-current LED paths, and long antenna-related conductors away from the capacitive-sensing area. Validate the completed touch interface with the intended enclosure and front panel because conductive housing, humidity, cable routing, and neighboring ground structures can change the measured touch response.
Do not substitute the /ML or /PT ordering codes for /MV without changing the PCB footprint. PIC16F707-I/ML and PIC16F707-I/PT are 44-pin options, while PIC16F707-I/MV is the 40-UQFN device. Likewise, treat PIC16F1827-I/MV and PIC16F18856-I/MV as engineering-review alternatives rather than automatic replacements; verify memory, peripherals, programming, interrupt behavior, and firmware before production use.
Compliance-Informationen
The manufacturer lists the PIC16F707 family as in production. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was confirmed for the exact /MV ordering code.