PIC16F76T-I/SS - 8-bit 20MHz MCU 14KB Flash | Microchip
Teilenummer: PIC16F76T-I/SS ✓ Aktiv| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $4.2 | $4,20 |
| 10 | $3.85 | $38,50 |
| 100 | $3.42 | $342,00 |
| 500 | $2.96 | $1.480,00 |
| 1.000 | $2.61 | $2.610,00 |
PIC16F76T-I/SS Übersicht
What is an 8-bit microcontroller? An 8-bit microcontroller (MCU) is a self-contained computing IC that integrates a CPU, program memory (FLASH/ROM), data RAM, peripherals (timers, ADC, communication ports), and I/O pins on one die. Within the broader semiconductor taxonomy, an MCU belongs to microcontrollers -> embedded processors -> logic ICs -> integrated circuits. 8-bit MCUs like the PIC16F76 are widely used in cost-sensitive, deterministic, low-power embedded designs where headroom for full 32-bit processing is unnecessary.
Key features include 35 single-word instructions (mostly single-cycle), upwards compatibility with PIC16C5X, PIC12CXXX, and PIC16C7X devices, an industrial operating temperature range of -40C to +85C, and FLASH program memory that supports in-circuit serial programming (ICSP). The 5-channel 8-bit ADC enables direct interface to analog sensors without external conversion hardware.
The PIC16F76T-I/SS uses Microchip's Harvard-architecture PIC core with separate program and data buses, delivering deterministic interrupt response suitable for real-time control. The integrated brown-out reset (BOR), watchdog timer, and power-on reset reduce external component count and improve reliability in harsh industrial environments.
Typical applications include industrial control logic, sensor signal conditioning with embedded ADC, motor-driver sequencers, low-cost appliance controls, and educational/hobby embedded projects. The PIC16F76T-I/SS is the tape-and-reel shipping variant (-T suffix) of the PIC16F76-I/SS in SSOP form.
When designing with this part, allocate enough I/O pins for your peripheral set - the SSOP-28 package exposes 22 usable I/O lines. Place decoupling capacitors within 5 mm of VDD and use the ICSP pins (RB6/RB7) for in-circuit firmware updates during prototyping.
This page synthesizes distributor pricing, drop-in same-family alternatives, and design notes for engineers evaluating the PIC16F76T-I/SS for new designs or as a long-term production MCU.
Drop-in-Alternativen für PIC16F76T-I/SS – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F76T-I/SS (gleiche Bauform und Footprint) – abweichend in ADC, Package, Timers, Communication, MSL Level.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
PIC16F76-I/SS
✅ Drop-In✓ Auf Lager
$5.45 / Stück
Datenblatt ansehen →PIC16F767T-I/SS
✅ Drop-In✓ Auf Lager
$4.18 / Stück
Datenblatt ansehen →PIC16F767-I/SS
✅ Drop-In✓ Auf Lager
$2.18 / Stück
Datenblatt ansehen →PIC16F76T-I/SS Grenzwerte & elektrische Eigenschaften
| Core Processor | PIC16F |
| Core Architecture | 8-bit Harvard |
| Max CPU Speed | 20 MHz |
| Instruction Cycle | 200 ns |
| Program Memory (Flash) | 14 KB (8K x 14 words) |
| RAM | 368 bytes |
| I/O Pins | 22 |
| ADC | 5 channels x 8-bit |
| Timers | 2 x 8-bit + 1 x 16-bit |
| CCP Modules | 1 (Capture/Compare/PWM) |
| Communication | USART/SCI, SPI, I2C (MSSP) |
| Gehäuse | 28-pin SSOP |
| Betriebstemperatur | -40C to +85C (Industrial) |
| Instruction Set | 35 single-word instructions |
| Montageart | Surface Mount |
| RoHS-Status | Compliant |
| Programming | ICSP (In-Circuit Serial Programming) |
PIC16F76T-I/SS Pin-Konfiguration
| Pin 1 | RA2/AN2/VREF- — PORTA bit 2 / ADC input 2 / ADC negative reference |
| Pin 2 | RA3/AN3/VREF+ — PORTA bit 3 / ADC input 3 / ADC positive reference |
| Pin 3 | RA4/T0CKI — PORTA bit 4 / Timer0 clock input (open-drain) |
| Pin 4 | RA5/AN4/SS — PORTA bit 5 / ADC input 4 / SPI slave select |
| Pin 5 | VSS — Ground reference |
| Pin 6 | OSC1/CLKI — Oscillator input / external clock input |
| Pin 7 | OSC2/CLKO — Oscillator output / clock output |
| Pin 8 | RC0/T1OSO/T1CKI — PORTC bit 0 / Timer1 oscillator output / Timer1 clock input |
| Pin 9 | RC1/T1OSI/CCP2 — PORTC bit 1 / Timer1 oscillator input / CCP2 output |
| Pin 10 | RC2/CCP1 — PORTC bit 2 / Capture/Compare/PWM1 output |
| Pin 11 | RC3/SCK/SCL — PORTC bit 3 / SPI clock / I2C clock |
| Pin 12 | RC4/SDI/SDA — PORTC bit 4 / SPI data in / I2C data |
| Pin 13 | RC5/SDO — PORTC bit 5 / SPI data out |
| Pin 14 | RC6/TX/CK — PORTC bit 6 / USART TX / USART clock |
| Pin 15 | RC7/RX/DT — PORTC bit 7 / USART RX / USART data |
| Pin 16 | VSS — Ground reference |
| Pin 17 | VDD — Positive supply voltage |
| Pin 18 | RB0/INT — PORTB bit 0 / external interrupt |
| Pin 19 | RB1 — PORTB bit 1 |
| Pin 20 | RB2 — PORTB bit 2 |
| Pin 21 | RB3/PGM — PORTB bit 3 / LVP programming input |
| Pin 22 | RB4 — PORTB bit 4 |
| Pin 23 | RB5 — PORTB bit 5 |
| Pin 24 | RB6/PGC — PORTB bit 6 / ICSP clock (programming) |
| Pin 25 | RB7/PGD — PORTB bit 7 / ICSP data (programming) |
| Pin 26 | RA0/AN0 — PORTA bit 0 / ADC input 0 |
| Pin 27 | RA1/AN1 — PORTA bit 1 / ADC input 1 |
| Pin 28 | VDD — Positive supply voltage |
Typische Anwendungen
PIC16F76T-I/SS ist geeignet für 7 Anwendungs: Industrial Sensor Monitoring, Appliance Control Boards, Automotive Body Electronics (non-powertrain), HVAC Thermostat Controllers, Educational Embedded Platforms, Battery Charger Controllers, Remote Sensor IoT Endpoints.
Industrial Sensor Monitoring
The PIC16F76T-I/SS is well-suited to industrial sensor monitoring with its integrated 5-channel 8-bit ADC and 22 digital I/O lines in a compact 28-SSOP package. The 14 KB flash (8K x 14) accommodates state-machine logic for sensor polling, threshold detection, and Modbus RTU framing without external memory. The 20 MHz CPU speed (200 ns instruction cycle) executes typical sensor reads, scaling, and Hysteresis checks in well under 1 ms per channel, leaving headroom for multiple sensors per scan loop.
Empfohlen
Appliance Control Boards
White goods and small appliance controllers rely on the PIC16F76T-I/SS for cost-effective user-interface and motor-control sequencing. The integrated 8-bit ADC reads potentiometers and thermistor inputs for temperature/power feedback, while the CCP module generates PWM signals for triac-fired heater elements or DC motor speed control. The 368-byte RAM handles keypad debounce, display buffering, and EEPROM parameter storage for user settings without external memory.
Empfohlen
Automotive Body Electronics (non-powertrain)
The PIC16F76T-I/SS industrial temperature grade (-40C to +85C) suits non-powertrain automotive body modules such as interior lighting, seat-position memory, and accessory controllers. Its 22 I/O pins drive LEDs, relays, and LIN-bus transceivers, while the USART module implements LIN slave communication with hardware break detection. For under-hood or powertrain use, migrate to PIC16F176x or dsPIC33 devices with AEC-Q100 qualification.
Empfohlen
HVAC Thermostat Controllers
HVAC thermostat designs leverage the PIC16F76T-I/SS ADC for thermistor temperature sensing and the CCP module for PWM-driven damper or fan control. The 14 KB program memory holds PID loop logic, weekly schedule tables, and LCD driver routines for character displays. The PIC16F76T-I/SS's brown-out reset and watchdog timer prevent lockup in field-deployed thermostats where reliability across power glitches is critical.
Empfohlen
Educational Embedded Platforms
Universities and training programs favor the PIC16F76T-I/SS for embedded systems courses because the 35-instruction RISC-like PIC instruction set is teachable in one lab session, and the ICSP programming interface allows in-circuit debugging on student PCBs. The 28-SSOP package breaks out to 0.65 mm pitch, which is hand-solderable with practice. Combined with MPLAB X IDE and XC8 compiler (free), the PIC16F76T-I/SS is a low-cost entry into MCU programming.
Empfohlen
Battery Charger Controllers
Lead-acid and NiMH charger designs use the PIC16F76T-I/SS to implement CC/CV charge profiles with the integrated ADC monitoring battery voltage and charge current. The 8-bit PWM (CCP module) drives a buck-converter power stage, while the USART reports telemetry to a host system. The 368-byte RAM logs charge-cycle data (Ah in, temperature, time) for end-of-charge detection. Migration to lithium chemistries requires firmware changes, not pin changes.
Empfohlen
Remote Sensor IoT Endpoints
Remote wireless sensor endpoints pair the PIC16F76T-I/SS with sub-GHz radio modules (e.g., MRF89XA) to form battery-powered IoT nodes. The PIC handles ADC sampling of environmental sensors, packet formatting, and sleep-cycle timing between transmissions. The PIC16F76T-I/SS's low-power sleep modes and short wake-up time extend battery life in field deployments, while ICSP allows firmware updates over the same ICSP pins used during development.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F76T-I/SS – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F76-I/SS | PIC16F767T-I/SS | PIC16F767-I/SS | PIC16F76-I/SO | PIC16F76-I/ML |
|---|---|---|---|---|---|---|
| Package | 28-SSOP | 28-SSOP (tube) - same | 28-SSOP - same | 28-SSOP (tube) - same | 28-SOIC - same pin count, larger footprint | 28-QFN - same pin count, smaller footprint |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Speed | PIC16F / 20 MHz | PIC16F / 20 MHz | PIC16F / 20 MHz | PIC16F / 20 MHz | PIC16F / 20 MHz | PIC16F / 20 MHz |
| Program Memory | 14 KB | 14 KB | 14 KB | 14 KB | 14 KB | 14 KB |
| RAM | 368 bytes | 368 bytes | 368 bytes | 368 bytes | 368 bytes | 368 bytes |
| I/O Pins | 22 | 22 | 22 | 22 | 22 | 22 |
| ADC | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit | 5 x 8-bit |
| Temperature Grade | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
| Additional Peripheral | 1x USART | 1x USART | 2x USART, more timers | 2x USART, more timers | 1x USART | 1x USART |
Wichtigste Unterscheidungsmerkmale
- Tape-and-reel shipping format (vs. PIC16F76-I/SS)
- Compact SSOP-28 footprint (vs. PIC16F877A-I/P (40-pin PDIP))
- 5-channel ADC + 2 timers + 1 CCP (vs. PIC16F73 (7 KB flash, 192-byte RAM))
Designhinweise
Decouple VDD with a 100 nF ceramic capacitor placed within 5 mm of pins 17 and 28, plus a bulk 10 uF tantalum or aluminum capacitor near the IC. The PIC16F76T-I/SS has two VDD pins (17 and 28) and two VSS pins (5 and 16); both pairs must be connected for proper internal power distribution. Insufficient decoupling causes ADC inaccuracies and brown-out resets during inrush events.
Do not confuse PIC16F76 with PIC16F73 - both are 28-pin SSOP, but PIC16F76 has 14 KB flash and 368-byte RAM, while PIC16F73 has only 7 KB flash and 192-byte RAM. Mixing the two in inventory leads to firmware overflow on PIC16F73 boards. Also note the -I suffix means industrial (-40C to +85C); for automotive or extended-temperature designs, select PIC16F76-E (extended grade) variants.
Route the ICSP pins (RB6/PGC and RB7/PGD) with short, direct traces to a 2x3 or 1x6 header placed at the board edge for in-circuit programming. Add ESD protection (e.g., 100 ohm series + 5.1 V zener) on these pins if the connector is user-accessible. Place the crystal or resonator within 5 mm of OSC1/OSC2 with short traces and a ground guard ring to reduce EMI pickup.
The 8-bit ADC shares pins with PORT A and PORTC. Use the same VDD source for analog and digital sections, or add a ferrite bead and dedicated analog VDD trace if the digital section has high-frequency switching noise. Enable the ADC's acquisition delay (TACQ) for high-impedance sources; sample at least 10 us after channel switching to avoid cross-talk artifacts.
At 20 MHz and 5 V supply, the PIC16F76T-I/SS draws approximately 20 mA (100 mW). The 28-SSOP package has a theta_JA around 100 C/W, yielding a 10C junction rise above ambient. No heatsink is required for industrial-grade operation, but ensure the surrounding copper pour does not exceed the SSOP thermal pad constraints if used.
Compliance-Informationen
RoHS and lead-free per Microchip product page; halogen-free per Microchip environmental certification. Not AEC-Q100 qualified - select PIC16F76-E for extended temperature or design AEC-Q100 qualified PIC16F1xxx variants for automotive.
