PIC16F884-I/PT - 8-Bit 20MHz Flash MCU | Microchip Technology
Teilenummer: PIC16F884-I/PT ✓ AktivPIC16F884-I/PT Übersicht
A flash-based microcontroller is a programmable semiconductor that stores its operating code in electrically rewritable nonvolatile memory. The PIC16F884 belongs to the PIC16 mid-range product family, combining a general-purpose CPU with timers, serial interfaces, comparators, and an analog-to-digital converter. This integration allows one device to control sensors, actuators, communications, and power functions without requiring several separate components.
Key device characteristics include a 20 MHz operating speed, 7 KB flash, 256 bytes of RAM, 256 bytes of EEPROM, and self-programming capability. The microcontroller provides a 10-bit ADC with 14 channels and two comparators, according to the manufacturer product information. Its 44-pin TQFP construction supports a broad mix of digital I/O and analog functions while remaining compatible with standard surface-mount assembly methods.
The architecture uses a 14-bit program word and a compact 35-instruction set intended to simplify code development for embedded control. Flash memory permits field reprogramming, while EEPROM preserves calibration values, configuration data, and operating counters across power cycles. The combination of self-programming, brown-out control, and selectable low-power operating modes supports designs that must maintain data integrity through supply interruptions and adapt their energy consumption to the operating state.
Typical uses include industrial sensor controllers, building automation modules, appliance control boards, data-acquisition equipment, and low-cost communications nodes. The 14-channel ADC supports analog measurement, while the microcontroller's serial peripherals and 36 I/O positions on the related listed variant provide flexible connections to sensors, displays, relays, and transceivers. The exact peripheral allocation must be confirmed against the 44-pin pin-description table before board routing.
Power design should follow the manufacturer's recommended operating voltage and decoupling guidance. Place the supply bypass capacitor close to VDD and VSS, reserve clean grounding for the analog and digital sections, and validate every connected pin against the package diagram. Because this is a pin-compatible upgrade question rather than a redesign exercise, compare program-memory size, temperature grade, analog-channel requirements, and peripheral mapping before approving a substitute.
This page combines the manufacturer's device summary with package, programming, application, and replacement guidance intended to make design review and sourcing decisions faster. It also identifies the limits of direct substitution so engineers can preserve code compatibility, PCB compatibility, and application performance.
Drop-in-Alternativen für PIC16F884-I/PT – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit PIC16F884-I/PT (gleiche Bauform und Footprint) – abweichend in Package, ADC, Timers, Operating Temperature, CCP Modules.
PIC16F884-E/PT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F884T-I/PT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F887-I/PT
✅ Drop-InPreis auf Anfrage
Datenblatt ansehen →PIC16F884-I/PT Grenzwerte & elektrische Eigenschaften
| Product Type | 8-bit CMOS flash-based microcontroller |
| Maximale Taktfrequenz | 20 MHz |
| Program Memory | 7 KB (4K × 14 words) |
| Program Word Width | 14 bit |
| Data RAM | 256 bytes |
| EEPROM | 256 bytes |
| Instruction Set | 35 single-word instructions |
| ADC Resolution | 10 bit |
| ADC Channels | 14 channels |
| Comparator Count | 2 |
| Self-Programming | Supported |
| Gehäuse | 44-TQFP (10 mm × 10 mm) |
| Montageart | Surface mount |
| Architecture | PIC16 enhanced flash-based 8-bit RISC core |
| Related Device I/O Count | 36 I/O |
PIC16F884-I/PT 44-tqfp (10 mm × 10 mm) Pinbelegungsleitfaden
Pinbelegung für PIC16F884-I/PT (44-tqfp (10 mm × 10 mm)-Gehäuse). Dieser digitale IC umfasst GPIO, Kommunikationsschnittstellen (UART, SPI, I2C) und Versorgungspins. Alternative Pin-Funktionen und Konfigurationsoptionen entnehmen Sie dem Herstellerdatenblatt. Unverzichtbar für Embedded-System-Design und PCB-Layout.
Keine detaillierten Pinbelegungsdaten verfügbar für PIC16F884-I/PT.
Siehe die Datenblatt für die vollständige Pin-Konfiguration.
Typische Anwendungen
PIC16F884-I/PT ist geeignet für 6 Anwendungs: Industrial Sensor and Condition Monitoring, Building Automation and HVAC Control, Appliance and Household Control, Low-Cost Communications Controller, Data Acquisition and Instrumentation, Power Supply and Charger Control.
Industrial Sensor and Condition Monitoring
The PIC16F884-I/PT fits industrial condition-monitoring nodes because its 10-bit ADC with 14 channels can sample multiple analog sensors while the 20 MHz processor performs filtering, threshold evaluation, and local data handling. The 256 bytes of RAM support short working buffers, and 256 bytes of EEPROM preserve calibration coefficients or event counters between power cycles. Place the device in a 44-TQFP layout with its analog pins routed away from switching nodes, then validate input ranges and grounding against the manufacturer electrical limits.
Empfohlen
Building Automation and HVAC Control
PIC16F884-I/PT can serve as the local controller for an HVAC or building-automation node, combining 36 I/O positions on the related listed variant, a 10-bit ADC, and two comparators. Its 7 KB flash is sufficient for coordinated fan, valve, temperature, and occupancy logic, while EEPROM retains configuration values. Use the 20 MHz processing capability for deterministic control updates and verify the selected pin multiplexing before assigning outputs to relays, sensors, and communication transceivers.
Empfohlen
Appliance and Household Control
The PIC16F884-I/PT is appropriate for compact appliance controllers that need a mix of digital outputs, analog sensing, nonvolatile parameters, and field-updatable firmware. Its 35-instruction set supports efficient control code, and the 256-byte EEPROM can hold operating modes, calibration offsets, or service counters. Keep mains-connected switching circuitry isolated from the MCU area, provide local decoupling at VDD and VSS, and confirm the exact temperature requirements for the appliance environment.
Empfohlen
Low-Cost Communications Controller
PIC16F884-I/PT can coordinate a compact communications endpoint by handling protocol framing, sensor acquisition, and actuator commands in a 44-pin surface-mount design. The 20 MHz clock provides processing headroom, while flash supports a bootloader or self-programming workflow and EEPROM preserves link parameters. Pin assignments and peripheral multiplexing must be checked in the manufacturer pin-description table, especially when adding a UART, SPI, or I2C peripheral.
Empfohlen
Data Acquisition and Instrumentation
The 14-channel 10-bit ADC in PIC16F884-I/PT supports multi-channel measurement modules that gather analog sensor data under firmware control. The 7 KB flash accommodates acquisition sequencing, scaling, diagnostics, and communication routines, while 256 bytes of EEPROM can record calibration or setup information. Use short, shielded analog traces, solid ground-plane distribution, and bypass capacitors near the supply pins to preserve measurement quality, then verify acquisition timing against the required sampling rate.
Empfohlen
Power Supply and Charger Control
PIC16F884-I/PT can manage a small power-conversion subsystem by reading current or voltage through its ADC and controlling enable signals, relays, or discrete power stages. The two comparators support fast threshold decisions, while the 20 MHz CPU handles sequencing and fault logic. Maintain separation between analog measurement and switching paths, validate absolute maximum stresses independently of the MCU supply, and include firmware checks that disable the power stage when sensor readings exceed safe limits.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für PIC16F884-I/PT – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | PIC16F884-E/PT | PIC16F884T-I/PT | PIC16F887-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10 mm × 10 mm) | 44-TQFP (10 mm × 10 mm) | 44-TQFP (10 mm × 10 mm) | 44-TQFP (10 mm × 10 mm) |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 7 KB (4K × 14 words) | 8K × 14 words |
| Temperature Ordering Option | Industrial-temperature ordering option | Commercial-temperature ordering option | Industrial-temperature ordering option | Industrial-temperature ordering option |
Wichtigste Unterscheidungsmerkmale
- Combines 20 MHz processing with 14-channel 10-bit ADC integration (vs. PIC16F887-I/PT)
- Industrial-temperature ordering option for embedded industrial control (vs. PIC16F884-E/PT)
- Self-programming with 256 bytes of EEPROM (vs. PIC16F884T-I/PT)
Designhinweise
Use the 44-pin package drawing and pin-description table to route power, ground, programming signals, oscillator connections, and multiplexed peripheral functions. Place the required bypass capacitor adjacent to the VDD and VSS pins, provide a low-impedance ground plane, and keep analog inputs away from switching-node copper. The TQFP lead pitch also requires solder-paste and reflow profiles capable of producing reliable joints across all 44 leads.
The 20 MHz PIC16F884-I/PT can support conventional embedded-control designs, but every connected trace still needs a controlled impedance and return path. Avoid routing oscillator or high-current switching signals beneath the MCU unless the board stack-up provides adequate isolation. For communications interfaces, keep traces short, provide a continuous reference plane, and match external components to the voltage and timing requirements in the manufacturer electrical tables.
Decouple the MCU supply locally and calculate worst-case current from the active clock, enabled peripherals, I/O loading, and temperature. Because the part uses EEPROM for nonvolatile parameters, include brown-out and write-protection logic in the application strategy. Confirm supply tolerances and power-up timing for every peripheral sharing the rail so that a slow-rising rail does not leave an I/O pin in an undefined state during startup.
Do not assume that a shared 44-TQFP footprint guarantees a drop-in replacement. Check the complete pin-multiplexing map, ADC availability, timer channels, serial functions, memory resources, configuration word, and programming interface before substituting PIC16F884-E/PT, PIC16F884T-I/PT, or PIC16F887-I/PT. Revalidate firmware behavior under the new temperature grade or flash capacity, particularly when code relies on specific interrupt vectors or peripheral registers.
Compliance-Informationen
Compliance status for RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict minerals remains unknown until confirmed through the manufacturer's product declarations.